CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Xin Cheng,Penghui Zhao,Mo Zhang,Shasha Wang,Mengshuai Liu,Fusheng Liu
The design and development of advanced functional materials for efficient absorption and selective conversion of carbon dioxide (CO 2 ) remains a challenging research topic. In this work, novel cyclotriphosphazene-based periodic mesoporous organosilicas (PMO-CPF) with various contents of active components and tunable porosity were successfully prepared via direct co-condensation method, and their structures were characterized by FT-IR, solid-state 13 C, 29 Si and 31 P NMR, XRD, N 2 adsorption–desorption, HR-TEM and TGA techniques. The PMO-CPFs as-prepared were applied for CO 2 adsorption and conversion into cyclic carbonates, and the adsorption capacity and catalytic behaviors were thoroughly investigated. The PMO-CPFs integrate the structural features of high specific surface area, Lewis basic units and multiple dual hydrogen bond donor (HBD) groups, which endow the materials with dual functions of CO 2 adsorption and epoxide activation by forming dual hydrogen bonds. The optimum PMO-CPF-20 combining with tetrabutylammonium iodide (TBAI) showed an excellent activity for the cycloaddition of CO 2 to propylene oxide (PO), and could afford 98% propylene carbonate (PC) yield with above 99% selectivity under the conditions of 90 °C and 2.0 MPa for 6.0 h. Moreover, the catalyst reusability and applicability to epoxides with different substituents were studied, and a feasible catalytic mechanism was finally proposed. The developed metal-free, robust and bifunctional mesoporous organosilicas here were suggested to be advanced materials for CO 2 adsorption and subsequent catalytic conversion.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Dongshun Deng,Xiaoxia Deng,Ke Li,Hao Fang
Development of high-efficient absorbents for ammonia (NH 3 ) to improve the quality of atmosphere and ecological environment has gained interest among scholars. Ionic liquids (ILs) with unique properties have been reported as potential solvents for NH 3 uptake to avoid many problems troubling the traditional NH 3 capture technology. In this study, six protic ethanolamine-based ILs (PILs) were synthesized for efficient and reversible NH 3 uptake, with the initial idea of constructing multiple binding sites to enhance the absorption ability for NH 3 . The physical properties and NH 3 absorption performance in these PILs were investigated and analysized on the basis of molecular structures. The results demonstrated that the preferred [EtAN][SCN] had suitable viscosity of 78.18 mPa.s and molality capacity up to 0.296 and 0.0802 g NH 3 /g PILs at 100.0 and 4.5 kPa NH 3 pressure, respectively. Such absorption ability was higher than all the reported absorbents related with ILs. 1 H NMR spectroscopy illustrated that the outstanding absorption ability was originated from multiple hydrogen-bonding interactions between acidic proton, hydroxyl group and thiocyanate with NH 3 . The absorption enthalpy of −35.5 kJ/mol was further calculated according to the absorption capacity at low NH 3 pressure under corresponding temperatures. In short, present PILs exhibited attractive absorption ability, excellent recyclability, low absorption enthalpy, and competitive selectivity of NH 3 /CO 2 . Present work can provide instructive idea for designing PILs in NH 3 recovery and separation application.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Zhou Fang,Zheng Deng,Xinyi Wan,Zhuoyi Li,Xu Ma,Shabab Hussain,Zhizhen Ye,Xinsheng Peng
Although Keggin-type polyoxometalates (POMs) have shown nice catalytic efficiency for CO 2 cycloaddition reaction, they suppressed by their low recycling ability and energy costing of direct heating. Decorated POMs into solid porous support with photothermal property is an alternative but promising way for solar-driven reaction. Herein, phosphomolybdate molecularly decorated ferrocene-based Zr-Fc (PMo 12 @Zr-Fc) metal organic frameworks (MOFs) nanosheet, which has outstanding photothermal conversion ability, are synthesized and used to catalyze cycloaddition reaction with styrene oxide and CO 2 under simulated sunlight. At light intensity of 0.4 W/cm 2 , the temperature of reactor with PMo 12 @Zr-Fc MOFs rapidly rises and up to 80 ℃, and 88.05 % yield of product is achieved. This PMo 12 @Zr-Fc catalyst also demonstrates nice recycling stability. The solar-driven cycloaddition process may exploit a new avenue for reusing CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
Green Energy & Environment
·
2021
·
IF 8.207
Kaihang Sun,Zhitao Zhang,Chenyang Shen,Ning Rui,Chang-jun Liu
Silver catalyst has been extensively investigated for photocatalytic and electrochemical CO 2 reduction. However, its high activity for selective hydrogenation of CO 2 to methanol has not been confirmed. Here, the feasibility of the indium oxide supported silver catalyst was investigated for CO 2 hydrogenation to methanol by the density functional theoretical (DFT) study and then by the experimental investigation. The DFT study shows there exists an intense Ag–In 2 O 3 interaction, which causes silver to be positively charged. The positively charged Ag species changes the electronic structure of the metal, facilitates the formation of the Ag–In 2 O 3 interfacial site for activation and dissociation of carbon dioxide. The promoted CO 2 dissociation leads to the enhanced methanol synthesis via the CO hydrogenation route as CO 2 ∗→CO∗→HCO∗→H 2 CO∗→H 3 CO∗→H 3 COH∗. The Ag/In 2 O 3 catalyst was then prepared using the deposition-precipitation method. The experimental study confirms the theoretical prediction. The methanol selectivity of CO 2 hydrogenation on Ag/In 2 O 3 reaches 100.0% at reaction temperature of 200 °C. It remains more than 70.0% between 200 and 275 °C. At 300 °C and 5 MPa, the methanol selectivity still keeps 58.2% with a CO 2 conversion of 13.6% and a space-time yield (STY) of methanol of 0.453 g methanol g cat −1 h −1 , which is the highest methanol STY ever reported for silver catalyst. The catalyst characterization confirms the intense Ag–In 2 O 3 interaction as well, which causes high Ag dispersion, increases and stabilizes the oxygen vacancies and creates the active Ag–In 2 O 3 interfacial site for the enhanced CO 2 hydrogenation to methanol.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Zhao Li,Zhi Liu,Yang Li,Qiu Wang
In this article, a simple yet effective in situ hydrothermal method has been developed to synthesize a series of CeO 2 and reduced graphene oxide (RGO) stepwise-doped CoAl-LDH (CACR) composites with CoAl-LDH/CeO 2 (CAC) as the intermediate. The smart design well integrates the photo-electrochemical merits of CoAl-LDHs and CeO 2 with conductive RGO to form an optimized formula with high light-harvesting ability, efficient charge separation, and rapid electron transfer . Owing to these features, the sample of CAC-5-R-10 containing 5 wt% CeO 2 and 10 wt% RGO, is found to be the most efficient one as the catalyst for CO 2 photoreduction with a high average CO evolution rate of 5.5 μmol·g −1 ·h −1 at 25 °C without sacrifice reagent or extra photosensitizer under ultraviolet light, which surpasses those of the single CeO 2 , CoAl-LDHs, the intermediate of CAC, and many reported LDH-based counterparts. With the assistance of Mott–Schottky curves, the Z-scheme mechanism is proposed for the significantly enhanced photo-activity of the CAC-5-R-10. The present work provides a good sample for integrating LDHs with a second semiconductor and conductive RGO for collaborative optimization of photoelectric characteristics towards enhanced CO 2 photoreduction.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS TODAY
·
2021
·
IF 6.766
Liangliang Zhang,Yang Feng,Huihui He,Yang Liu,Jiena Weng,Peng Zhang,Wei Huang
In this article, we report a series of hexanuclear rare-earth MOFs based on Ce (III) and 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin, namely Ce-PCN-224, with a new zln topology through linker induce strategy. Ce-PCN-224 exhibits permanent porosity, high water and thermal stabilities, and the ability to adsorb dye molecules in the aqueous environment. Moreover, after post-metallation with Fe, Co, and Ni, Ce-PCN-224(Fe) and Ce-PCN-224(Co) were proved to be efficient heterogeneous catalysts for the cycloaddition of CO 2 with epoxides, attributed to the combination of multiple Lewis acidic sites.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2020
·
IF 7.888
Di Xu,Xinlin Hong,Guoliang Liu
Metallic oxide based catalysts have received much attention in CO 2 hydrogenation to methanol because of their high methanol selectivity and long-term stability. But the relatively weak hydrogenation ability leads to low methanol activity. Here, we introduce a small amount of Cu (molar fraction < 2%) into ZnZrO x to form ternary metal oxide solid solution catalysts (x% CuZnZr) to promote methanol production . The optimized 0.5% CuZnZr catalyst performs CO 2 conversion of 9.5% and methanol yield of 7.2%, both of which are about 4 times that of ZnZr catalyst at comparable methanol selectivity (76% versus 80%) at 290 °C. Chemisorption and in situ diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) analyses reveal that the enhanced activity is attributed to the improved hydrogenation capacity and accelerated transformation of HCOO* to CH 3 O* caused by hydrogen spillover from well dispersed Cu. This can also be applied to trace amount of Pd or Pt doping to ZnZrO x .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Yafei Sang,Yiwen Cao,Lizhi Wang,Wei Yan,Tianwen Chen,Jianhan Huang,You-Nian Liu
Due to the p-π conjugative effect between the nitrogen atom of the amide and the carbonyl, the amide carbonyl has much low reactivity and the Schiff base reaction between the amide and amine usually did not take place, but after the amide was polymerized, it's quite different. Herein, benzene-1,3,5-triyltris((9H-carbazol-9-yl) methanone) (HTCZ) is not able to have the Schiff base reaction with melamine . Surprisingly, after HTCZ was polymerized according to the Friedel-Crafts reaction, the resultant polymer PHTCZ-1 performed the Schiff base reaction with melamine successfully, and a kind of novel N-rich porous organic polymers , namely, PHTCZ-1-MA was successfully synthesized. Moreover, PHTCZ-1-MA owned much higher Brunauer-Emmett-Teller surface area (613 m 2 ·g −1 ) and pore volume (0.57 cm 3 ·g −1 ) with very high nitrogen content (42.39 wt%). The theoretical calculation showed that the positive charge of the carbonyl carbon increased by 18% after the polymerization, which greatly improved the reactivity of the carbonyl. Because of this amazing change, PHTCZ-1-MA was proven to be an excellent adsorbent for CO 2 capture (180 mg·g −1 at 273 K and 1.0 bar) and mercury(II) adsorption (335 mg·g −1 at 273 K). This study makes the impossibility possible and provides a unique synthesis strategy for the fabrication of a kind of N-rich porous organic polymers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Ling Wang,Ying-shuang Zhang,Hong-ru Jiang,Hui Wang
As promising adsorbents in carbon capture and storage, hyper-cross-linked polymers (HCPs) require high CO2 uptake and selectivity over N2 and CH4. Herein, we reported a series of novel carbonyl-incorporated HCPs using oxalyl chloride as a cross-linker. To enhance the CO2 adsorption capacity and gas selectivity, the fabricated HCPs were further modified by methods of amine functionalization (HCPs-N) and KOH activated carbonization (HCPs-C). Accordingly, the maximum CO2 adsorption capacity of HCPs (HCP3) reaches 198 mg/g owing to abundant carbonyl groups and dominant microporous structures (SBET1047 m2/g, Smicro628 m2/g). Meanwhile, under the effect of amine functionalization, the selectivity of the obtained HCPs-N (HCP3-N) is greatly improved, reaching a maximum of 85.71 (SCO2/N2) and 8.12 (SCO2/CH4). Furthermore, after KOH activated carbonization, the amount of CO2 adsorption of HCPs-C (HCP3-C) significantly increases to 270 mg/g due to the higher specific surface area (SBET1421 m2/g) and arising ultramicroporous structures (Vultra0.26 cm3/g). Aromatic polymers with microporous structures and carbonyl group can be prepared and functionalized to improve the CO2 adsorption and gas selectivity by simple and mild reactions. Our study provides new options for CO2 capture of HCPs and provides a new idea for the synthesis of new HCPs.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2020
·
IF 12.35
Feng Jiang,Shanshan Wang,Bing Liu,Jie Liu,Li Wang,Yang Xiao,Yuebing Xu,Xiaohao Liu
CeO2 is an excellent potential material for CO2 hydrogenation attributed to the highly tunable properties including metal–support interaction and abundant oxygen vacancy. In this work, four CeO2 supports with structurally well-defined different shapes and crystal facets are hydrothermally prepared, and their effects on the composition of Pd species and oxygen vacancy over Pd/CeO2 catalysts have been intensively investigated in the reduction of CO2 to methanol. The 2Pd/CeO2-R (rods) shows the highest concentration and number of oxygen vacancies, where the (110) facet with high surface oxygen mobility and low oxygen vacancy formation energy is exposed over the CeO2-R surface. The oxygen mobility at the interface of (111) and (100) facets mainly observed on 2Pd/CeO2-P (polyhedrons) is higher than the single (111) and (100) facets mainly observed on 2Pd/CeO2-O (octahedrons) and 2Pd/CeO2-C (cubs), respectively. The presence of Pd highly promotes the formation of oxygen vacancies by providing dissociated H atoms to facilitate the removal of surface O in ceria support under a H2 atmosphere. Both the PdxCe1–xOδ solid solution dominated on CeO2-R and the PdO species dominated on CeO2-O are reduced to metallic Pd after reduction with 6–10 nm average particle size. As revealed by density functional theory (DFT) calculations, in contrast to the single Pd0 atom on CeO2 and the thermodynamically most unstable PdxCe1−xOδ solid solution, the Pd0 nanoparticles are the most stable species under the realistic reaction conditions. The 2Pd/CeO2-R shows the highest catalytic activity as the abundantly available oxygen vacancies function as CO2 adsorption and activation sites. Moreover, oxygen vacancy reactivity is correlated with its formation energy. The lower formation energy facilitates the formation of oxygen vacancy; however, the reactivity of each oxygen vacancy is lower as the TOFoxygen vacancy of 2Pd/CeO2-O is 15 times as that of 2Pd/CeO2-R. Thus, a suitable oxygen vacancy formation energy is likely favorable for enhancing CO2 reactivity. DFT calculations indicate that the CH3OH formation is most probably from the formate (HCOO*) pathway via the C–O bond cleavage in H2COOH*, with the reduction of HCOO* to HCOOH* as the rate-limiting step. These results would provide experimental and theoretical insights into the rational design of an effective catalyst for CO2 hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2021
·Vol. 45
·期 2
·1082-1091
·
IF 3.591
Yunqi Wang,Zhixiang Liu,Xu Tang,Pengwei Huo,Zhi Zhu,Boting Yang,Zhi Liu
In-depth research of the active sites and charge transport behavior is an important topic for investigating photocatalytic reduction of CO2. Herein, a novel photocatalyst composed of flake-like porous graphitic carbon nitride (P-CN) and CsPbBr3 is fabricated via a high temperature calcination and freeze drying method. The experimental results show that P-CN/CsPbBr3 has a superior CO2 reduction efficiency, and that the yield of CO reaches 30.39 μmol g−1, which is about 7.2 and 1.2 times higher than those of the primary B-CN (4.2 μmol g−1) and CsPbBr3 (24.4 μmol g−1), respectively. The improvement in photocatalytic performance is mainly ascribed to the heterostructure, which can promote the separation of photogenerated carriers, and the porous structure of P-CN, which can improve the absorption capacity of CO2. This study provides a significant method for the construction of efficient g-C3N4 based photocatalysts to reduce CO2.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Xiaona Zhang,Tian Xia,Qiang Li,Liping Sun,Lihua Huo,Hui Zhao
Exploring high-performance and durable cathode materials can accelerate the commercialization of intermediate/low-temperature solid oxide fuel cells (SOFCs). Herein a highly active and CO 2 -tolerant perovskite cathode, Pr 0.94 Ba 0.7 Ca 0.3 Co 2 O 5+ δ (P 0.94 B 0.7 Ca 0.3 C), is well-designed and developed for SOFCs operating below 700 °C. It is discovered that cation-ordered/disordered perovskite phases co-exist in P 0.94 B 0.7 Ca 0.3 C, induced by calcium doping. As a result, the P 0.94 B 0.7 Ca 0.3 C cathode exhibits a polarization resistance as low as 0.022 Ω cm 2 at 700 °C in air. When tested under realistic conditions, an anode-supported single cell delivers a peak power density of 1202 mW cm −2 at 700 °C, along with excellent long-term stability for 120 h. Furthermore, the CO 2 tolerance of P 0.94 B 0.7 Ca 0.3 C is investigated in CO 2 -containing atmosphere, demonstrating an initial polarization resistance of 0.035 Ω cm 2 in air with 10 vol% CO 2 at 700 °C, which increases to 0.053 Ω cm 2 after a 13 h operation. The degradation rate is merely ∼1/4 of that for the state-of-the-art Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3- δ (BSCF) cathode. The outstanding ORR kinetics and durability highlight the potential of P 0.94 B 0.7 Ca 0.3 C as a promising cathode candidate for SOFCs operating below 700 °C.
✓ 已验证
产品关联
DOI
高影响因子