文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4201至4212个,产品总数6,840个

切换升序
Co2
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

Enhanced photocatalytic CO2 reduction in H2O vapor by atomically thin Bi2WO6 nanosheets with hydrophobic and nonpolar surface

Yunpeng Liu,Dongyan Shen,Qiao Zhang,Yuan Lin,Feng Peng

The artificial carbon dioxide (CO 2 ) photoreduction into useful chemicals utilizing solar energy demands the stable photocatalysts with high-efficiency charge separation and effective CO 2 adsorption capacity. For all this, for the first time, Bi 2 WO 6 photocatalysts with atomically thin structure along with hydrophobic and nonpolar surface are successfully designed and prepared using CTAB as assistant. The ultrathin feature with short diffusion distance significantly facilitates the charge separation. The hydrophobic surface, modified by nonpolar long carbon chains of CTA + , boosts both the mass-transfer and adsorption of CO 2 , meanwhile suppressing the H 2 O adsorption. Hence, the prepared photocatalyst exhibits a high-efficiency photocatalytic conversion of CO 2 in H 2 O vapor without co-catalyst due to high CO 2 concentration and sufficient photogenerated carriers. The photocatalytic mechanisms including adsorption concentration and activation process of CO 2 are further revealed by the in-situ diffuse reflectance infrared fourier transform spectra (DRIFTS). As a new feature, linearly adsorbed CO at 2035 cm −1 is found on hydrophobic surface of Bi 2 WO 6 , and the absorbance of CO is critical to the next reaction step for CH 4 generation. This innovation provides a facile avenue for the design of photocatalysts with remarkable CO 2 capture ability to achieve the practical application of photocatalytic CO 2 reduction.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL THERMODYNAMICS · 2020 · IF 2.888

The solubility of CO2 in (hexane + cyclohexane) and (cyclopentane + ethylbenzene) and (toluene + undecane) systems at high pressures

Yahui Gao,Chuanyan Li,Shuqian Xia,Peisheng Ma

In this work, the solubility of CO 2 in three binary hydrocarbon mixtures of different molecular structures, hexane + cyclohexane, cyclopentane + ethylbenzene and toluene + undecane at 313.15 K, 343.15 K, 373.15 K and pressures up to 13.83 MPa were measured. The solubility measurements were undertaken in the designed apparatus. The experimental results show that the solubilities of CO 2 in the binary hydrocarbon mixtures are mainly affected by the molecular structure and carbon numbers of hydrocarbon. The more ratios of high-carbon hydrocarbon in the mixtures, the lower solubility of CO 2 is. The experimental data were compared with the calculated results of PR and PSRK models. The average absolute relative deviations of bubble pressure were 2.54%–5.66% and 1.45%–7.66%, respectively. Both models gave satisfied results, while the PR was superior to PSRK when the interaction parameters of the relevant systems were provided. PRSK model can calculate the solubility data better near the critical region.

CAS / MDL: 287-92-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2020 · IF 6.182

Double-sided modification of TiO2 spherical shell by graphene sheets with enhanced photocatalytic activity for CO2 reduction

Yanming Yang,Ming Liu,Shitong Han,Hailing Xi,Chao Xu,Rusheng Yuan,Jinling Long,Zhaohui Li

TiO 2 spherical shells with both inner and outer surface modified by graphene have been successfully constructed through a stepwise loading method. This double-sided modification method greatly increases the contact area of the shell with graphene sheets, which is beneficial for graphene to separate more photoelectrons from both the inner and outer sides of the shell simultaneously. The results of photocatalytic reduction of CO 2 into CO indicate that the modification effects of inner and outer wall of TiO 2 shell by graphene seem to be relatively independent to each other. As a result, compared with the traditional single-sided modified samples, even these optimal ones, the loading of graphene on the other side of TiO 2 shell can still improve the photocatalytic reduction performance. Moreover, the optimal dosage of graphene on one side of shell surface is always maintained, without being affected by the graphene usage on the other side. This work indicates that the unique heterojunction obtained by graphene double-sided modification is advantageous to enhance the photocatalytic CO 2 reduction performance and expected to be extended to the construction of other photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2020 ·Vol. 10 ·期 11 ·3694-3700 · IF 5.721

Phosphorus-doped inverse opal g-C3N4 for efficient and selective CO generation from photocatalytic reduction of CO2

Xiaoyue Huang,Wenyi Gu,Songchang Hu,Yan Hu,Liang Zhou,Juying Lei,Lingzhi Wang,Yongdi Liu,Jinlong Zhang

In this work, inverse opal (IO) structure construction and phosphorus doping were combined to modify carbon nitride (g-C3N4) for the photocatalytic reduction of CO2. The inverse opal structure was fabricated by a hard template method, and the phosphorus doping was introduced by heat treatment of the mixed inverse opal g-C3N4 and NaH2PO2. The inverse opal structure greatly improved the specific surface area and enhanced the light absorption of g-C3N4, and the phosphorus doping can significantly change the electronic properties and surface charges, narrow the band gap and suppress the recombination of photogenerated charge carriers. The obtained catalyst P–IO CN exhibited excellent photocatalytic activity for CO2 reduction. Experimental results reveal that the products of all samples were CO and CH4. CO was detected as the main product with selectivity reaching 91% and the CO evolution rate of P–IO CN reached 31.22 μmol g−1 h−1, which is about 3.3 and 6 times higher than that of IO CN and bulk CN, respectively. Our work provides new insight into the enhanced photocatalytic reduction of CO2 with metal-free materials in the era of energy shortage.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2020 · IF 7.489

Cuprous ion (Cu+) doping induced surface/interface engineering for enhancing the CO2 photoreduction capability of W18O49 nanowires

Mengmeng Zhang,Gang Cheng,Yi Wei,Zhipan Wen,Rong Chen,Jinyan Xiong,Weijie Li,Chao Han,Zhen Li

Solar-driven reduction of CO 2 and H 2 O into fuels is a promising approach for addressing global warming and energy crisis. Herein, Cu + doped W 18 O 49 nanowires were prepared by a facile solvothermal method and applied in photocatalytic reduction of CO 2 . The composition and structure of pristine and Cu + doped W 18 O 49 samples have been characterized. It was found that the morphology of W 18 O 49 nanowires was changed with increasing amounts of dopant . The photocatalytic CO 2 reduction activity of W 18 O 49 nanowires and the Cu + doped W 18 O 49 samples were evaluated using H 2 O as reducing agent. The strategy of Cu + doping not only could affect the band edge position and the surface wettability , but also influenced separation of the photogenerated electron-hole pairs. It was found that Cu + doping could introduce oxygen vacancy and change the conduction edge to a more negative position for W 18 O 49 nanowires, which might be beneficial for the activation of CO 2 and promote the following CO 2 reduction. Furthermore, the higher separation efficiency of photogenerated electron-hole pairs with Cu + doping could contribute to the CO 2 photoreduction enhancement. In addition, the Cu + doped W 18 O 49 nanowires (Cu-W 18 O 49 -0.005) presented a relatively poor hydrophilic property , which might be beneficial for the adsorption of CO 2 molecules and contribute to its superior photocatalytic CO 2 reduction capability.

CAS / MDL: 10125-13-0 13283-01-7
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2020 · IF 3.573

Simultaneous Absorption of H2S and CO2 into the MDEA + PZ Aqueous Solution in a Rotating Packed Bed

Junlei Zhan,Beibei Wang,Liangliang Zhang,Bao-Chang Sun,Jiwen Fu,Guang-wen Chu,Haikui Zou

This work presented experimental and modeling studies on the simultaneous absorption of H2S and CO2 into the N-methyldiethanolamine (MDEA) and piperazine (PZ) solution in a rotating packed bed (RPB). The effect of different operating conditions, including MDEA concentration (CMDEA), PZ concentration (CPZ), liquid volumetric flow rate (L), temperature (T), and high gravity factor (β) on the absorption efficiencies of H2S and CO2 (ηH2S and ηCO2) were investigated. The results showed that ηH2S and ηCO2 were significantly affected by CMDEA, CPZ, L, and β. ηH2S and ηCO2 could reach 99.98 and 96.51%, respectively. Furthermore, an artificial neural network (ANN) model was established to predict ηH2S, ηCO2, and mass-transfer coefficient (KGa). Results showed that the predicted values were in good agreement with the experimental values (within deviations of ±10% for H2S and CO2). This work provides a potential technology of simultaneous absorption of H2S and CO2 for the biogas upgrade.

CAS / MDL: 7439-89-6 52013-36-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
AICHE JOURNAL · 2020 ·Vol. 66 ·期 6 ·e16936 · IF 3.519

Highly selective absorption separation of H2S and CO2 from CH4 by novel azole-based protic ionic liquids

Xiaomin Zhang,Wenjie Xiong,Lingling Peng,Youting Wu,Xingbang Hu

Recently, the selective removal of H 2 S and CO 2 has been highly desired in natural gas sweetening. Herein, four novel azole-based protic ionic liquids (PILs) were designed and prepared through one-step neutralization reaction. The solubility of H 2 S (0–1.0 bar), CO 2 (0–1.0 bar), and CH 4 (0–5.0 bar) was systematically measured at temperatures from 298.2 to 333.2 K. NMR and theoretical calculation were used to investigate the reaction mechanism between these PILs and H 2 S. Reaction equilibrium thermodynamic model (RETM) was screened to correlate the H 2 S solubility. Impressively, 1,5-diazabicyclo[4,3,0] non-5-ene 1,2,4-1H-imidazolide ([DBNH][1,2,4-triaz]) shows the highest H 2 S solubility (1.4 mol/mol or 7.3 mol/kg at 298.2 K and 1.0 bar) and superior H 2 S/CH 4 (831) and CO 2 /CH 4 (199) selectivities compared with literature results. Considering the excellent absorption capacity of H 2 S, high H 2 S/CH 4 , and CO 2 /CH 4 selectivity, acceptable reversibility, as well as facile preparation process, it is believed that azole-based PILs provide an attractive alternative in natural gas upgrading process.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2020 · IF 5.774

An effective hybrid solvent of MEA/DEEA for CO2 absorption and its mass transfer performance in microreactor

Daofan Ma,Chunying Zhu,Taotao Fu,Xigang Yuan,Youguang Ma

The gas-liquid two-phase flow and the mass transfer characteristics for CO 2 absorption into the binary amine mixture of monoethanolamine (MEA) and N,N-diethylethanolamine (DEEA) aqueous solution were investigated in T-junction microchannel reactor with a square cross-section. The effects of gas-liquid flow rate and absorbent concentration on bubble length, velocity and mass transfer coefficient were studied. Three flow regimes including slug-bubbly flow, slug flow and slug-annular flow were observed under experimental condition, and the gas-liquid two-phase flow pattern map was depicted. It is found that the transitions between three flow regimes depend primarily on the competition of forces exerted on bubble in the T-junction. The kinetics of CO 2 absorption into blended amine aqueous solutions was analyzed to understand the mass transfer enhancement mechanism of new hybrid solvent. Furthermore, the liquid-side overall mass transfer coefficient k L and the liquid-side overall volumetric mass transfer coefficient k L a were determined through processing experimental images recorded by a high-speed camera. The results show that k L a is in the range of (3.04–20.07) s −1 in this work, which is 2–3 orders of magnitude higher than that in the conventional equipment. The dimensionless Damköhler number ( Da ) and Peclet number ( Pe ) are introduced to correlate the liquid-side volumetric mass transfer coefficient, new correlation shows good prediction accuracy with the average deviation of 3.64%.

CAS / MDL: 100-37-8 142-58-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED ENERGY · 2020 · IF 8.848

Enhanced kinetics for CO2 sorption in amine-functionalized mesoporous silica nanosphere with inverted cone-shaped pore structure

Feijian Lou,Anfeng Zhang,Guanghui Zhang,Limin Ren,Xinwen Guo,Chunshan Song

Amine-functionalized mesoporous silica is one of the most promising solid sorbents for CO 2 capture. The pore structure of sorbents plays a crucial role in enhancing sorption and desorption kinetics. In this work, mesoporous silica nanosphere (MSN) with inverted cone-shaped pore structure was synthesized and examined as the support for polyethyleneimine (PEI). The unique pore structure of MSN support for PEI resulted in significantly faster sorption and desorption rates and higher sorption capacity within short sorption time when compared to the benchmark support SBA-15 with the same amount of PEI loading. With 65 wt% PEI loading, 65PEI/MSN sorbent showed about 50% higher working capacity, together with 27% faster rate of CO 2 sorption and 71% faster rate of CO 2 desorption, compared to that with 65PEI/SBA-15 in sorption/desorption cycles. PEI/MSN sorbents have great potential for practical applications in CO 2 capture.

CAS / MDL: 9002-98-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2020 · IF 5.774

PIM-1 as an organic filler to enhance CO2 separation performance of poly (arylene fluorene ether ketone)

Lei Hou,Zhe Wang,Zhaoyu Chen,Wenbo Chen,Cancan Yang

PIM-1 and poly(arylene fluorene ether ketone) (Am-PAFEK) were synthesized by polycondensation . Their structures were characterized by 1 H NMR and FT-IR spectral analyses. A series of flexible and transparent blend membranes were prepared by solution blending with different ratios of PIM-1 and Am-PAFEK. DSC and SEM analyses showed good compatibility between them. PIM-1 and Am-PAFEK in the blend membrane perform their respective functions. The former provides excellent permeability; the latter provides high selectivity for CO 2 . Addition of 20% Am-PAFEK into the blend membrane increased the gas separation selectivity of CO 2 /CH 4 and CO 2 /N 2 by 75% and 65%, respectively. The optimum separation performance was achieved with blend membrane with a CO 2 permeability of 752.4 Barrer and a CO 2 /N 2 selectivity ratio of 26.7, extremely close to the Robeson upper bound (2008). After 140-days aging test, the blend membranes still maintained above 70% CO 2 permeability, indicating that it has good antiaging properties. Consequently, the new type of membranes have great potential in industrial applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROPOROUS AND MESOPOROUS MATERIALS · 2020 · IF 4.551

Sandwich-type H2/CO2 membranes comprising of graphene oxide and sodalite crystals with adjustable morphology and size

Ge Yang,Hailing Guo,Zixi Kang,Shou Feng,Lei Zhao,Svetlana Mintova

Sandwich-type membranes comprising of graphene oxide (GO) as a “bun” and sodalite (SOD) nanocrystals with different morphologies and sizes as an inner layer were prepared. First, the SOD nanocrystals with spheroidal (size of 30 nm) and flake-like (size of 150 nm) morphologies were synthesized from precursor suspensions containing the same amount of GO as a modifier but different amounts of water. Second, the SOD nanocrystals with different morphologies and sizes were deposited between two GO layers to form the sandwich-type membrane. The performance of the sandwich-type membranes in H 2 /CO 2 gas separation was optimized by tuning the properties of the SOD inner layer. The membrane containing spheroidal SOD nanocrystals showed higher H 2 permeance of 4003 ± 1965 GPU and H 2 /CO 2 selectivity of 45.5 ± 1.7 at 25 °C in comparison to the pristine GO membrane (1642 ± 145 GPU and H 2 /CO 2 selectivity of 11.2 ± 2.1).

CAS / MDL: 10213-79-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2020 ·Vol. 10 ·期 5 ·2932-2941 · IF 3.119

Hydrothermal synthesis of nitrogen-doped ordered mesoporous carbon via lysine-assisted self-assembly for efficient CO2 capture

Xia Wan,Yuchen Li,Huining Xiao,Yuanfeng Pan,Jie Liu

Nitrogen-doped ordered mesoporous carbons (NOMCs) were synthesized by single-step hydrothermal self-assembly using F127 as a soft template, hexamine as a formaldehyde source, L-lysine as a polymerization catalyst, and 3-aminophenol as both carbon and nitrogen sources. The microstructure of the NOMCs was characterized by XRD, N2 adsorption/desorption, TEM, FTIR, and XPS. The results indicated that the obtained NOMCs exhibited a large specific surface area, uniform pore size distribution and highly ordered 2-D hexagonal mesostructure (P6mm). Besides, the nitrogen was uniformly doped into the carbon framework in the form of various nitrogen species. The adsorption isotherms of CO2 and N2 were also determined and could be well fitted by a DSL model. The capture capacity of CO2 was affected by both the nitrogen content and mesostructure of the adsorbents. Overall, NOMC-L-0.5 displayed excellent CO2 capture capacity (0 °C, 3.32 mmol g−1; 25 °C, 2.50 mmol g−1), and still demonstrated great regenerability with only 2% loss after several CO2 adsorption/desorption cycles. Moreover, the CO2/N2 selectivity calculated by IAST was as high as 43.2 at 25 °C in a typical composition of flue gas (binary mixtures with 15% CO2). The superior adsorption performance enables NOMCs to be a promising CO2 adsorbent in practical applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。