CLEAN-Soil Air Water
·
2026
·Vol. 54
·期 1
·e70109
·
IF 1.4
Yun Xing,Xiangfei Zhang,Yuqi Zhou,Jingjing Guo,Yuan Huang,Xiaohan Xu,Jiankun Li,Dingyu Wang
The disposal of spent coffee grounds (SCG) not only represents a significant waste of resources but also poses environmental challenges, highlighting the need for effective pretreatment strategies to mitigate potential adverse effects. Incorporating metal oxides into biomass-based adsorbents can enhance their adsorption capacity for heavy metal ions by enhancing electrostatic attraction and increasing the number of accessible active sites. In this study, KMnO 4 -modified spent coffee grounds (KMnO 4 -SCGS) were successfully synthesized and applied for the removal of Cd(II) from aqueous solution. Key process parameters, including contact time, pH, initial Cd(II) concentration, temperature, and adsorbent dosage, were systematically investigated. Characterization using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and x-ray photoelectron spectroscopy (XPS) confirmed that KMnO 4 treatment increased the abundance of oxygen-containing functional groups and promoted the deposition of manganese oxides (MnO x ) on the adsorbent surface. The adsorption isotherm followed the Langmuir model, and the kinetics were well fitted by the pseudo-second-order model. The maximum Langmuir adsorption capacity of KMnO 4 -SCGS for Cd(II) was determined to be 49.54 mg/g at pH 5.0, and 298 K. Thermodynamic analysis indicated that the adsorption process was spontaneous and endothermic. The enhanced Cd(II) uptake was primarily attributed to the synergistic effect of MnO x and oxygen-containing functional groups, which facilitated the formation of surface complexes. In conclusion, KMnO 4 modification represents an effective strategy for developing high-performance adsorbents for Cd(II) removal.
✓ 已验证
产品关联
DOI
高影响因子
Laser & Photonics Reviews
·
2026
·
IF 9.7
Dawei Wen,Haoyuan Weng,Bin Xiao,Pan Wang,Ruijing Fu,Zhiwei Ma,Qingguang Zeng,Guanjun Xiao
Luminescence pressure sensors, valued for their remote sensing capability and high resolution, have been developed recently. However, most current sensors rely on a linear relationship between an optical property and pressure. We propose a nonlinear machine learning (ML) method to model the luminescence intensity ratio (LIR) as a function of pressure. The versatility and performance of this method are demonstrated using (Y,Gd)(Al,Ga) 3 (BO 3 ) 4 :Cr 3+ phosphors as luminescent pressure sensors. The relative sensitivities of the 2 E → 4 A 2 / 4 T 2 → 4 A 2 LIRs in (Y,Gd)(Al,Ga) 3 (BO 3 ) 4 :Cr 3+ range from 1.58%/GPa to 25.27%/GPa. The ML fitting demonstrates a superior performance compared to linear fitting, with lower mean absolute errors (0.0355–0.1499 GPa vs. 0.1209–0.6955 GPa) and higher R 2 values (99.70–99.98% vs. 93.69–99.79%). The ML fitting method is more suitable for modeling the nonlinear relationships between LIR and pressure than traditional linear fitting. The nonlinear ML fitting approach offers a powerful new way to model the relationships between luminescence features and various physical parameters.
✓ 已验证
产品关联
DOI
高影响因子
PLANT BIOTECHNOLOGY JOURNAL
·
2026
·
IF 10.5
Yike Su,Xiaojuan Yang,Chanyuan Wu,Xianyao Jin,Yuanyuan Zhang,Yuyan Zhang,Kunsong Chen,Mingliang Yu,Bo Zhang
Free amino acids (FAAs) play a fundamental role in determining fruit quality and stress adaptation, yet their genetic regulation remains poorly understood. Through an integrated approach combining metabolomic and sensory analyses of 120 peach ( Prunus persica ) hybrids, we identified glutamate as a key metabolite linking FAA content to umami taste perception. By combining genome-wide association studies (GWAS) with expression quantitative trait locus (eQTL) mapping, we identified PpGGAT1 (glutamate:glyoxylate aminotransferase) and the zinc finger transcription factor PpC2H2-3 as central regulators of glutamate metabolism. Functional characterisation revealed that overexpression of PpGGAT1 led to reduced glutamate levels and diminished umami intensity, whereas PpC2H2-3 transcriptionally suppresses PpGGAT1 to enhance glutamate accumulation. Notably, elevated glutamate levels enhanced resistance to Monilinia fructicola infection, with both genes showing significant expression changes during the progression of brown rot disease. Comparative analysis further indicated that freestone cultivars exhibit superior glutamate accumulation, a trait confirmed across 100 commercial varieties. Our findings reveal a novel regulatory module, PpC2H2-3-PpGGAT1, that coordinately modulates fruit flavour quality and defence responses against pathogens. This study provides mechanistic insights into FAA regulation in fruit crops and identifies actionable molecular targets for the development of varieties with enhanced sensory attributes and disease resistance.
✓ 已验证
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Hailong Sun,Jie Song,Peng Luo,ZeZhan Zhang,Xinrui He,Chao Wang,Yi Niu,Jing Jiang
As next-generation quasi-solid-state ionic thermoelectric materials, ionogels show great potential in low-grade waste heat recovery and efficient energy management, with their thermoelectric performance stemming from cation-anion diffusion rate differences under thermal gradients. In this study, a PVDF-HFP-based ionogels, achieving a thermopower of 23.7 mV K −1 and a power density of 102.8 µW m −2 K −2 by manipulating ion-ion interactions is developed. Interestingly, precise control of the temperature difference, leading to nonlinear temperature-voltage characteristics. By doping a series of cations with different properties such as charge quantity and ionic radius, the ion-ion interactions are analyzed to explore the influencing mechanism on the nonlinear feature arising from the dynamic reconstruction of ion concentration. This feature facilitates thermal switching for overheat protection in electronics. A device with 18 ionogel units is fabricated, achieving 2.09 V output and dynamically controlling an LED. This work reveals the role of cation doping in regulating thermoelectric properties from the perspectives of ion-ion interactions and demonstrates the application of ionogels in thermal management via nonlinear thermal response.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Laser & Photonics Reviews
·
2026
·
IF 10
Jiaxue Ren,Zexuan Chen,Zhuo Li,Song Shen,Henggang Wang,Yongqing Zhai,Zhengxu Cai,Zhenguang Wang
Achieving high-temperature-resistant afterglow is highly desirable yet challenging, primarily due to exciton deactivation at elevated temperatures. In this work, a co-pyrolysis strategy was proposed to achieve such afterglow by modulating the emission dynamics of organic molecules through introducing of structural defects. These defects facilitate exciton transfer to guest molecules, extending and balancing the lifetimes of both thermally activated delayed fluorescence and phosphorescence processes. The structural defects also promote thermoluminescence, wherein elevated temperatures trigger the release of trapped electrons to the guest molecules, thereby contributing significantly to the exceptional high-temperature afterglow stability. Additionally, the pyrolysis process generates ammelide, which protects excitons from deactivation. These synergistic effects yield afterglow materials exhibiting a photoluminescence quantum yield of 59.9% and an emission lifetime of 3.5 s. Remarkably, intense afterglow emission persists from 25 to 150°C with negligible changes in emission color, intensity, and decay kinetics. These findings provide valuable insights for modulating the emission dynamics of afterglow materials, suggesting promising applications in information security, biomedical diagnosis, and chemical sensing.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Yanke Wang,Xing Zhang,Mengzhe Han,Ying Zheng,Chengtao Yu,Yongzhong Bao,Guorong Shan,Jianna Bao,Pengju Pan,Junfeng Liu
Under the urgent demand for sustainable energy solutions, phase-change fibers (PCFs) offer substantial potential for thermal energy storage through the reversible phase transitions. However, the limited solar energy utilization, constrained thermal storage capacity, and the trade-off between encapsulation efficiency and stability impede the broad applications of PCFs. To address these challenges, we herein developed a coaxial microfluidic spinning device to precisely control the fiber size and crystalline structure by regulating the flow rate and composition of polymer solutions, achieving a high phase-change enthalpy of 155.4 J/g and a large encapsulation efficiency of 74.4% in the resulting PCFs. Additionally, the crystalline structure of biodegradable poly(lactic acid) sheath was tuned by the stereocomplex crystallization of its two stereoisomers, leading to the enhanced mechanical, barrier property of fiber sheath and the improved stability of PCFs. Furthermore, the incorporation of cesium tungsten oxide nanoparticles as infrared absorbers enhanced the efficient capture of solar energy, the thermal conduction, and crystallinity of PCFs. The PCF fabrics demonstrated exceptional thermal storage and regulation capabilities on the house model and skin surface. This work offers an effective and scalable strategy for developing high-performance PCFs towards smart thermal management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 12.1
Jialu Fang,Xinyi Mei,Jun Sun,Ping Hu,Yu Long,Wei Zheng,Haiming Duan,Zhaofeng Wu
This study develops a high-performance room-temperature (RT) hydrazine (N 2 H 4 ) gas sensing material based on sustainable algal biomass. A porous carbon material (US-1.5) was fabricated from Undaria pinnatifida and sodium alginate via ice-templating and freeze-drying, yielding a hierarchical meso/macroporous structure that facilitates gas diffusion. Natural heteroatoms enable in situ self-doping, modulating electronic structure and surface reactivity. First-principles calculations confirm S-doping enhances adsorption energy and promotes charge transfer, creating more active sites for gas-surface interactions. The resulting US-1.5 sensing material demonstrates a high response of 22.53k% to 500 ppm N 2 H 4 , rapid response/recovery times (21.3 s/2.5 s), a low detection limit of 0.138 ppm, excellent selectivity, and cycling stability. It also shows humidity-dependent dual-mode sensing. This work pioneers algal aerogel-derived sensing materials, demonstrating marine waste upcycling for green, cost-effective gas sensing in environmental and industrial safety applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Yuyan Sun,Mengmeng Tan,Xiaoyu Zhou,Yi Li,Dun Jin,Xiao Yu,Fenghua Li,Haitao Wang,Qixian Zhang
A self-healing and reprocessable polyurethane elastomer was developed via a rigid–dynamic dual network strategy, which integrates a covalent adaptive network (CAN) based on dynamic crosslinkers dimethylglyoxime (DMG) and with the rigid aromatic structure of tetrabromobisphenol A bis(2-hydroxyethyl) ether (TBBPA-BHEE). This work systematically examines the influence of TBBPA-BHEE and DMG on the mechanical characteristics, dynamic reorganization behavior, and self-healing capabilities of the resulting elastomers. Through compositional adjustments, a series of tunable elastomers were synthesized and evaluated. The optimized elastomer demonstrates a tensile strength of 14.8 MPa, a toughness of 58.9 MJ/m 3 , and an elongation at break of 927.9%. These results highlight the efficacy of incorporating CAN structures into polyurethane systems to achieve multifunctional performance. The developed elastomers exhibit excellent reprocessing and recyclability, addressing environmental concerns associated with traditional polyurethanes. Reversible oxime urethane bonds make reshaping and reuse of the new polyurethanes available under mild thermal conditions.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Jiayu Zhang,Enhui Liu,Xuan Wang,Li Li,Yingbo Guan
To achieve stable thermal processing of water plasticized PVA and improve the brittleness of the final films, citric acid (CA) was introduced. By establishing a new hydrogen bonding network with PVA and water, and forming an ester crosslinking network with PVA, CA effectively inhibited the intense evaporation of water and improved the thermal processing stability of the system. The plasticization and crosslinking of CA competed with each other, reaching the optimal balance at a concentration of 20%. The obtained PVA film exhibited structural integrity and excellent oxygen barrier property (OTR of 0.90 × 10 −16 cm 3 ·cm/cm 2 ·s·Pa), surpassing the commercial EVOH/PA/PE film (OTR of 6.83 × 10 −16 cm 3 ·cm/cm 2 ·s·Pa), and achieved the elongation at break of 93%, six times higher than pure PVA film, and tensile strength of 51 MPa. CA also endowed the film with antibacterial properties, effectively delaying the spoilage process of strawberries for more than 5 days. This synergistic plasticization and crosslinking mechanism of CA on PVA would provide a reference for solving the big challenge in thermal processing of water-plasticized PVA, and a feasible strategy for developing sustainable food packaging films that integrate barrier, toughness, and antimicrobial properties.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.9
Shutong Yang,Xiurui Lang,Huibin Zhou,Yingxia Zong
The enhancement of polyurethane properties for demanding applications through modification techniques remains a key research focus. In this study, the modified polyurethane (IPU) is synthesized using polycaprolactone diol (PCL), 4,4′-diphenylmethane diisocyanate (MDI), and 1,4-butanediol (BDO) as raw materials, with itaconic anhydride (IA) incorporated to react with the terminal hydroxyl polyurethane prepolymer (Pre-PU). The effects of different IA contents on the structure, crystallization behavior, and properties of the IPU are systematically investigated. The results show that the IPU with 12 mol% IA exhibits the highest degree of hydrogen bonding, a relatively lower soft segment crystallinity, and a more developed microphase-separated structure. This formulation demonstrates optimal overall performance, including enhanced tensile strength and elongation at break (13.9 MPa and 672.2%, respectively), good damping properties, and the least reduction in hydrophobicity. Graphical This work investigates the effect of itaconic anhydride (IA) content on the properties of IA-modified polyurethane. The results demonstrate that the optimal content effectively enhances hydrogen bonding, improves soft segment crystallization, and promotes microphase separation, enabling a synergistic improvement in mechanical strength and toughness.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.9
Zijian Lu,Wei Wu,Dietmar Drummer,Uta Rösel,Florian Tomiak,Yi Wang,Chao Liu,Shuo Li,Xintong Zhao
In this study, a micro/nano hybrid filler comprised of Al 2 O 3 @CuNPs is synthesized through a chemical reduction method. The incorporation of Cu nanoparticles serves as a bridge, addressing the contact issues within the filler and substantially enhancing its ability to establish a thermal conductivity network. The filler loading was kept at a constant level up to 70 wt%; however, the copper amount was varied between 0 and 10 wt%. The resulting thermal conductivity of the Al 2 O 3 @CuNPs/EP composite exhibits a gradual increase with the filler content, reaching 1.06 W/mK at a total filler content of 70 wt%. This represents a remarkable growth rate of 457.9% compared to pure EP. This material holds promising potential for applications in thermal conductivity materials. Graphical Improved thermal conductivity of EP by mirco-nano hybrid fillers.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Weihan Chen,Zhenghong Guo,Yanhui Zhang,Juan Li
Polyurethane foam (PUF) is widely recognized for its excellent mechanical properties, yet its inherent flammability and potential toxicity of certain additives limit its compliance with green and safe production principles. In this study, a novel melamine-based polyether polyol (MFPPG) was synthesized using dialdehyde starch as the key bio-based feedstock. Compared with previously reported melamine-based polyether polyols, MFPPG has lower viscosity and toxicity, and better flame-retardant performance in PUFs. Under the optimal molar ratio of raw materials, MFPPG showed favorable hydroxyl value and viscosity. When replacing 3% of commercial polyether polyol PPG4110, the modified polyurethane foams (MPUFs) exhibited significantly improved flame retardancy, thermal insulation, and mechanical performance; further increasing MFPPG loading led to poor compressive strength. Specifically, the compressive strength of MPUF was greatly enhanced, and the 3% MFPPG-loaded MPUF also showed obviously improved thermal insulation performance compared with commercial foam.
✓ 已验证
DOI
高影响因子