CARBON
·
2023
·
IF 10.9
Linyi Wu,Yipei Li,Binghua Zhou,Jian Liu,Deliang Cheng,Shien Guo,Keng Xu,Cailei Yuan,Mingxi Wang,Gan Jet Hong Melvin,Josue Ortiz-Medina,Sajjad Ali,Teng Yang,Yoong Ahm Kim,Zhipeng Wang
Coupling graphene-based materials with SiC nanostructures is one of the most feasible strategies to improve the photocatalytic CO 2 reduction performance. Here, we synthesized the vertical graphene (VG) sheets on the SiC nanowires achieved from rice husks to form the VG@SiC/C composite, in which the VG sheets possess high surface area, excellent electrical conductivity , and chemical stability, and the SiC nanowires have a suitable bandgap for sunlight absorption. The resulting VG@SiC/C composite provides an enhanced photocatalytic reduction of CO 2 to CO and CH 4 , yielding CO and CH 4 evolution yields of 25.5 and 2.3 μmol g −1 h −1 , respectively. The achieved CO yield is maximal so far among the SiC-based photocatalysts . The defective VG sheets promote the absorption of sunlight, enhance the CO 2 adsorption and activation, increase the separation of photogenerated electron-hole pairs, improve the activity of photocatalyst, and thereby prompt the photocatalytic reduction of CO 2 to CO with high yield and selectivity.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Pan Ma,Meili Ding,Ying Zhang,Wei Rong,Jianfeng Yao
The heterogeneous catalytic conversion of carbon dioxide (CO 2 ) conversion is an appealing yet highly challenging task. Introducing target-specific active sites into solid catalysts provides an alternative but promising way for boosting the chemical fixation of CO 2 . Here, we designed a lanthanide (III) complex with 1-vinyl imidazole (Vim) and immobilized it with DUT-5 by a combination of coordination and in situ polymerization. The resultant La-Vim/DUT-5 with high porosity and multiple active sites achieves a catalytic yield of 94% for CO 2 cycloaddition of epichlorohydrin, much superior to that of each component. More importantly, such catalytic activities can be well maintained using simulated flue gas as C1 source under both dry and humid conditions. This work opens up a novel and general avenue to tailor the chemical functionality of MOFs for capturing and converting CO 2 under actual conditions.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2023
·
IF 2.8
Hui Wei,Xu Xin-Yi,Wang Hai-Jun
The conversion of atmospheric carbon dioxide (CO 2 ) gas mixtures and epoxides to cyclic carbonates is an environmentally beneficial execution strategy, which is a useful platform chemical. However, this reaction is overly dependent on harsh reaction conditions including temperature and/or CO 2 pressure in the traditional conversion process. We report a series of facilely prepared functionalized ionic liquids (ILs) for the one-pot synthesis of styrene carbonate (SC) from pure/diluted CO 2 with styrene oxide (SO). Which achieved a yield up to 99% under atmospheric CO 2 conditions. In addition, with the assistance of a small amount of catalyst, the product yield remained at 99% under diluted CO 2 conditions. This result demonstrates that functionalized ILs could effectively catalyze the cycloaddition reaction of low-pressure CO 2 without any co-catalysts such as metals, organic solvents, and active additives. The density functional theory (DFT) calculations combined with experimental results revealed that the highest catalytic ability of Cat.2 was ascribed to the synergic catalysis between positive charge delocalized cations and Br − anions to efficiently activate the substrates. Furthermore, the best ILs catalyst can be reused five times without significant reduction in catalytic activity, which shows its great potential for chemical conversion of atmospheric CO 2 . Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Fei-Fei Chen,Linghao Zhou,Chao Peng,Dantong Zhang,Lingyun Li,Dongfeng Xue,Yan Yu
Current heterojunction photocatalysts suffer from sluggish charge transfer due to the discontinuous interfaces at an atomic level. Herein, we report a NiO–Co 3 O 4 ultrathin lateral heterojunction using NiCo-based bimetal–organic layers as precursors. The atomic-resolution images display a unique continuous semi-coherent interface between NiO and Co 3 O 4 . The experimental results confirm that the continuous semi-coherent interfaces effectively expedite the electron transfer from NiO to Co 3 O 4 . Concomitantly, the electron transfer raises d -band center of Co 3 O 4 in NiO–Co 3 O 4 toward Fermi level, as revealed by the density functional theory calculations. As a result, the *COOH intermediate can be strongly bound on cobalt reactive centers. The successful modulation of charge transfer and intermediate binding by continuous semi-coherent interfaces leads to a remarkable gas yield of 22.67 mmol h −1 from photocatalytic CO 2 reduction over NiO–Co 3 O 4 . This work highlights the crucial roles of interface engineering in regulating carrier kinetics and surface reactions.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Shengnan Zhong,Lina Tian,Lixin Yi,Yifan Liu,Weiguo Cheng,Yibo Wang,Yunong Li
Among various strategies for CO 2 chemical fixation, the CO 2 cycloaddition with epoxides is one of the most promising and efficient approaches, in which ionic liquid (ILs) is a typical relatively environmentally friendly catalyst and medium. However, ILs decomposition and catalytic stability have not been in-depth investigated, and the structure-activity relationship of cations and anions has remained obscure, which would affect the understanding of catalytic behavior and catalyst loss, and limit the theoretical research and industrial application in CO 2 utilization. Therefore, based on a variety of phosphonium ILs we have designed and synthesized for CO 2 cycloaddition, the structure-activity relationship, steric hindrance and electronic effect of various anions and cations have been systematically studied in main and side reactions. Especially, a regulation strategy of cationic flexible steric hindrance and anionic electron effect have been developed to improve both ILs’ activity and stability. Remarkably, the synergistic action of electron-donating effect, hydrogen bond and decreased acidity from flexible steric alkyl groups result in the spatial shielding of cation center and enhancement of the Br's leaving. Consequently, the quaternary phosphonium ILs with asymmetric flexible steric hindrance exhibit the optimal performance, showing propylene oxide (PO) conversion of 99.15% and propylene carbonate (PC) yield of 98.86%, which can efficiently decrease the formation of phosphine oxide, avoiding the decomposition of ILs. This discovery provides a new idea for developing stable and efficient CO 2 fixation system in sustainable industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2023
·
IF 6
Chaojie Pang,Jiage Liu,Rui Peng,Yingying Guo,Zhiyong Li,Huiyong Wang
Titanium disulfide nanosheets (TiS 2 NSs) have attracted considerable research interest due to their eco-friendliness and outstanding electrical transport properties. However, the large scale preparation of TiS 2 NSs usually is plagued by the employ of poisonous solvents and low production. Herein, we develop a green, highly efficient and scalable tactic to exfoliate bulk TiS 2 powders in aqueous ionic liquids solutions under ambient conditions. This result shows that the exfoliation yield can reach 57.6 %, which surpasses the most values for the liquid-phase exfoliation of TiS 2 reported in literatures. The thickness of TiS 2 NSs is mainly in the range of 1 nm to 2 nm, and the lateral dimension is up to a few hundreds of nanometers. The molecular geometry and anionic alkalinity of the ionic liquids play key roles in the delamination and stability of TiS 2 NSs. In addition, TiS 2 NSs have been used as catalysts in the electrocatalytic CO 2 to CO conversion with the faradaic efficiency of 68.7 %, which is six times that by the bulk TiS 2 powder. Thus, the liquid phase delamination approach reported in this work has a great potential in manufacturing 2D layer materials for high activity electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
PLASMA SOURCES SCIENCE & TECHNOLOGY
·
2023
·Vol. 32
·期 4
·045010
·
IF 3.8
Xu Tian,Dongyuan Wang,Bo Ouyang,Qiang Chen,Zhongwei Liu,Xinwei Wang
A novel plasma-assisted fluidized-bed atomic layer deposition process to synthesize Pd-Cu bimetallic nanoparticles is reported, using palladium hexafluoroacetylacetonate, copper(I)-N, N'-di-iso-propylacetamidinate and H2 plasma. The process allows us to uniformly deposit Pd-Cu nanoparticles in porous powder, which is a mixture of γ-Al2O3 (30 wt%), amorphous aluminum silicate (50 wt%) and molecular sieve (20 wt%) (ASM). With metal loadings of 13.1 and 2.5 mg g−1 for Pd and Cu, respectively, the afforded 13.1Pd-2.5Cu catalyst shows excellent catalytic performance for the hydrogenation of CO2 in a dielectric barrier discharge reactor with no intentional heating. Under the condition of discharge input power of 24.6 W, H2-to-CO2 ratio of 4 in feed gas, and gas hourly space velocity of 7595 h−1, the conversion of CO2 can reach as high as 38.0%, with the CH4 and CH3OH product selectivities of 6.7% and 12.8%, respectively. Density functional theory calculations are further employed to understand the associated CH3OH formation mechanism.
✓ 已验证
DOI
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2023
·
IF 4.3
Xi Chen,Yu Huang,Xu Wang,Haibo Li,Lin Zhu,Xinyang Xu,Shaoyan Jiang
A novel, sample and economical method was used to prepare the new co-doped TiO 2 photocatalysts and evaluated for CO 2 photoconversion under visible-light irradiation. The La(NO 3 ) 3 -TiO 2 photocatalyst was obtained by the sol–gel method and then was heat treated with different concentrations of ammonia vapor. It was found that the synergistic modification of TiO 2 photocatalyst by La(NO 3 ) 3 and ammonia vapor could improve its photocatalytic performance under visible light. The photocatalytic assessment presented a significantly amelioration in CO 2 photoconversion, giving 3.078 μmol CH 4 production in 4 h. The structures and properties of the photocatalysts were characterized and analyzed by means of XRD, SEM-EDS, HRTEM, BET, XPS, FTIR, ICP-AES, UV–vis DRS and theoretical calculation. The performance of the photocatalyst could be correlated to contributions of various phenomena such as larger specific surface area and the co-exposed (1 0 1) and (0 0 1) facets of anatase TiO 2 . Finally, the most likely substituted structures were obtained. The results of DFT + U theoretical calculation showed that La and N could modify TiO 2 by replacing surface Ti atoms and internal O atoms, respectively.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2023
·
IF 6.2
Tianbo Jia,Linlin Wang,Lina Zhang,Zhouhao Zhu,Kun Zhang,Baikang Zhu,Xin Li,Chunyang Zhai,Shunli Li,Yingtang Zhou,Hengcong Tao
Electrochemical carbon dioxide reduction (ECR) to ethylene by using renewable energy is a viable way to tackle the global climate change, and beneficial to facilitate closing the carbon cycle . Herein, a sulfur-doped spherical coral-like CuO (S-CuO) catalyst was facile synthesized, which is enabling efficient conversion CO 2 -to-C 2 H 4 . The obtained 5% S-CuO can reach the Faradaic efficiency (C 2 H 4 ) of 48.4% with a current density of 15 mA cm −2 at -1.3 V vs. RHE, which maintained stability over 20 h in 0.1 M KHCO 3 electrolyte. XPS , SEM, TEM, and XRD were applied in the characterization of the materials. EPR, CO 2 adsorption measurements and density functional theory calculations results indicate that the incorporation of S can promote CO 2 adsorption, activation and the formation of *COOH intermediate, which is boosting CO 2 conversion enabling the high selectivity to C 2 H 4 . Compared to unmodified CuO, electrocatalytic studies show that the greatly increased C 2 H 4 activity on S-CuO is because of the fast electron transfer . Meanwhile, the contact angle measurement reveals the excellent selectivity is derived from the suppression of the hydrogen evolution reaction after the S doping.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2023
·Vol. 27
·期 5
·1269-1278
·
IF 2.5
Li Minzhang,Xu Junyuan,Qi Fei,Wang Yu,Yan Chunliu,Xu Jiaju
A tetrafluoro substituted CoPc (CoF 4 Pc), which is well dispersed in N,N-dimethylformamide (DMF), was used to modify carbon nanotubes (CNTs) via a facile sonication method, resulting in CoF 4 Pc nanorods with the length lower than 30 nm on the CNT surface. The as-fabricated CoF 4 Pc-CNT composites showed superior CO 2 RR catalytic activity compared with that of individual CoF 4 Pc, due to enhanced mass transfer and electrical conductivity arising from the CNT substrate. The CoF 4 Pc-CNT composite with the CoF 4 Pc/CNT weight ratio of 2:30 exhibited the highest CO current density of 29.0 mA cm −2 and CO selectivity of 91.8% at − 0.85 V vs. reversible hydrogen electrode (RHE) in a flow cell setup containing 0.5 M KHCO 3 , which was ascribed to enhanced charge transfer induced by highly dispersion of CoF 4 Pc nanorods, and good conductivity of CNT substrates. The work provides new insights for developing low-cost, effective, phthalocyanine-based catalysts for electrochemical CO 2 RR.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2023
·
IF 5
Huang Ouyang,Kunpeng Song,Irshad Hussain,Bien Tan
CO2 cycloaddition with epoxides is an important chemical process for CO2 conversion to generate cyclic carbonates, which are major sources and intermediates of fine chemicals and electrolytes. Unfortunately, the catalytic efficiency of various porous organic polymers (POPs) for the CO2 cycloaddition process remains poor and necessitates severe conditions or a prolonged reaction time at mild temperature and pressure. Only a few reports have emphasized the improvement of the interaction among POP heterogeneous catalysts with CO2, in addition to many attempts to boost efficiency by increasing the adsorption capacity of POPs for CO2. Furthermore, chemisorption, which can efficiently adsorb and activate CO2, could be used to establish a high binding affinity and interaction among POPs and CO2. Herein, we report amine-impregnated porous organic polymers, i.e., hyper-cross-linked polymer (HCP)-tetraphenylporphyrin (TPP), using a wet impregnation method that differentiates itself from the chemical grafting method due to the simplicity of sample preparation and high amine loading to create abundant CO2 chemisorption sites to effectively adsorb and activate CO2 for easier cycloaddition reactions under mild conditions. The amine-functionalized heterogeneous catalysts HCP-TPP-Co-EDA-10 and HCP-TPP-Co-PEI-5 showed a strong binding affinity with CO2 (Qst value of 31.8 and 52.5 kJ mol–1) and high catalytic yield (reaching up to 99%) under mild temperature and pressure. Interestingly, the turnover number (TON) and turnover frequency (TOF) could reach up to 6930 and 193 h–1, respectively, which are one of the highest values reported so far under mild conditions. Furthermore, HCP-TPP-Co-EDA-10 and HCP-TPP-Co-PEI-5 have excellent recyclability and stability (more than five recycling times) for CO2 conversion. Additionally, a possible mechanism is also proposed for the catalytic conversion reaction. This simple strategy of utilizing amines as chemisorption sites for CO2 is demonstrated as an approach to designing highly efficient functionalized hyper-cross-linked polymers (HCPs) for CO2 capture and chemical conversion.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Peijing Shao,Yao Shen,Jiexu Ye,Jingkai Zhao,Lidong Wang,Shihan Zhang
Metal-organic frameworks (MOFs) have been extensively studied as candidate materials for enzyme immobilization over recent years. In this work, carbonic anhydrase was immobilized in ZIFs by “in situ” immobilization method. The growth state of ZIF-8 was adjusted by adjusting the ratio of Zn 2+ and 2-Hmim to obtain crystals with different morphologies (cubic-, dodecahedral- and leaf-shape). In addition, different surfactants (cationic surface-active agent, an-ionic surfactant, and non-ionic surface-active agent) were added as “shape-inducing agents” to further regulate the crystal shapes, thus affecting the activity of enzyme immobilization in ZIFs. Through CO 2 absorption test, it was found that the thick leaf-shaped CA/ZIF-L-(PVP) induced by PVP had a higher relative activity (150%) than other shapes (cubic, dodecahedral, “burr puzzle” shape, “interpenetration leaves” shape, etc.) of immobilized enzymes. In addition, CA/ZIF-L-(PVP) exhibited excellent reusability and stability, which maintained a relative activity of 131% after 5 cycles, and remained approximately 99% relative activity after 15 days at 40 °C in MDEA solution.
✓ 已验证
产品关联
DOI
高影响因子