CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Zhipan Wen,Jun Ke,Jinlei Xu,Sheng Guo,Yalei Zhang,Rong Chen
Toxic heavy metals As(V) and Cr(VI) removal from water environment has becoming more and more urgent due to their adverse health effect. In this study, the flowerlike Ce/Fe bimetallic oxides (CFBO), which combined the superiority of three-dimensionally (3D) hierarchical architectures and bimetallic synergistic effect, were innovatively designed and synthesized via one-step facile template-free hydrothermal method. Compared with pure iron oxides (PIO), the obtained CFBO exhibited excellent performance for As(V) and Cr(VI) removal, and the maximum adsorption capacities toward As(V) and Cr(VI) increased from 49.09 mg/g to 164.94 mg/g and 38.07 mg/g to 127.42 mg/g, respectively. Both As(V) and Cr(VI) removal efficiency decreased with an increasing solution pH due to the pH zpc of CFBO, but exhibited slightly change with coexisting anions except for SiO 3 2− and PO 4 3− ions. Combined results of FT-IR and XPS, it was concluded that the abundant hydroxyl groups existed on the surface of CFBO played a key role in the high uptake of As(V) and Cr(VI), and subsequently formed inner-sphere surface complexes. Attractively, the remarkable removal efficiency of As(V)/Cr(VI) in column experiments revealed that the CFBO had great potential for practical application.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Hui Wang,Yuhan Xiong,Liang Wang,Yi He,Meihui Chen,Jie Ding,Nanqi Ren
The rational design of efficient photocatalysts to achieve artificial nitrogen fixation is an urgent challenge. Herein, we combined donor–acceptor covalent organic framework with iron-doped nitrogen vacancy graphitized carbon nitride (D-A COF/Fe-g-C 3 N x ) for photocatalytic nitrogen fixation. The photocatalyst exhibited good crystallinity, high porosity, and a large specific surface area. Without a sacrificial agent, the optimal 40 % D-A COF/Fe-g-C 3 N x exhibited an excellent rate of ammonia production (646 μmol h −1 g −1 ) at 420 nm, and durable stability after successive cycling. Exhaustive experimental research and theory calculations verified that the D-A unit and Fe doping redistributed the distribution of the charge, which enhanced the visible light utilization and provided chemisorption sites for further polarization. Besides N -vacancies can serve as electron-trapping active sites to promote the directional migration of carriers. The reaction mechanism demonstrated that superoxide radical and hydrogen peroxide were formed by electron and hole, respectively, which promote the reduction of nitrogen to ammonia. This work provides a new idea for the rationalizing design of efficient catalysts for photocatalytic nitrogen fixation under mild conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Water
·
2024
·Vol. 16
·期 13
·1795
·
IF 3
Mengxue Li,Lanbao Zhu,Jing Wang,Li Ma,Zhengwei Pan,Wenwei Ji,Xiaoyu Sun,Ruping Li,Xia Li,Shilong Duan,Yule Tao
Mn-substituted FeOOH with different Mn/(Mn + Fe) molar ratios are synthesized, and characterized using FESEM, XRD, FTIR, ICP-OES, BET, Zeta potential, TG-DSC, XPS, and VSM. The results show that the actual doping amounts of Mn are 0%, 3.05%, 6.13%, 9.04%, 12.70%, and 15.14%, respectively. The substitution of Mn promotes the transformation of goethite from FeOOH to MnFe2O4, resulting in a saturation magnetization intensity of up to 14.90 emu/g for G-Mn15%, laying a theoretical foundation for magnetic recovery. The specific surface area of Mn-substituted FeOOH increases from 57.15 m2/g to 315.26 m2/g with an increasing Mn substitution amount. Combined with the abundant oxygen-containing functional groups such as -OH, Fe-O, and Mn-O on the surface, sufficient active sites are provided for the efficient adsorption of U(VI). The TG-DSC analysis results indicate that the substitution of Mn improves the thermal stability of goethite. In addition, XPS analysis results indicate that the substitution of Mn leads to the conversion of Fe3+to Fe2+in goethite, and the conversion of Mn2+to Mn3+replaces Fe3+in the structure of goethite. Fe-O and Mn-O coordinate participate in the adsorption and reduction process of U(VI). The batch experiment results show that the substitution of Mn promotes the adsorption performance of goethite for U(VI). When T = 303 K, pH = 4.0, m/V = 0.5 g/L, and I = 0.01 mol/L NaCl, the maximum adsorption capacity of G-Mn15% for U(VI) is 79.24 mg/g, indicating the potential value of Mn substitution for goethite in the treatment of uranium-containing wastewater.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Fanlin Kong,Yi liu,Shiyu Cao,Huimin Chen,Yanwei Fan,Junhua Wang,Jincheng Yao,Aimin Chang
In this study, single-phase high-entropy ceramics (HECs) with the composition (Co,Mn,Fe,Zn,Ni,Mg,Al,Cr) 3 O 4 were successfully synthesized using five different types of spinel raw materials. The resulting material demonstrates excellent performance in the negative temperature coefficient (NTC) thermistor field. X-ray diffraction (XRD) analysis confirmed the structure as a cubic spinel with a single Fd-3m space group. The electron microscope image reveals the growth of ceramic grains with increasing sintering temperature, with a uniform distribution of all elements. After 1800 h of accelerated aging at 150 °C, the Δ R / R 0 value was only 0.41 %, indicating the ceramic's exceptional structural stability. X-ray photoelectron spectroscopy(XPS) analysis reveals that electrical conductivity are mainly governed by electron hopping between Mn 3+ and Mn 4+ ions in the octahedral sublattice sites. Impedance spectroscopy further shows that grain boundary resistance is the dominant contributor to the total resistance. This study provides new insights into the synthesis of single-phase HECs materials and proposes strategies to enhance material stability for future applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2025
·
IF 6.7
Yang Song,Shibin Zhang,Haoxin Shen,Wen Qin,Jin Jiang,Jun Ma
In this study, calcium hypochlorite (Ca(ClO) 2 ) combined with potassium ferrate (Fe(VI)) (Ca(ClO) 2 /Fe(VI)) oxidation system was developed to enhance the stability of Fe(VI) and removal efficacy of emerging contaminants. For the removal of micropollutants with various moieties, carbamazepine (CBZ) and phenol removals (50 % and 35 %) in the initial stage were enhanced by Ca(ClO) 2 /Fe(VI) oxidation system, which were primarily attributed to the Ca(ClO) 2 enhanced micropollutant removal by stabilizing Fe(VI) through H 2 O 2 scavenging in the Ca(ClO) 2 /Fe(VI) system, increasing Fe(VI) exposure to boost direct degradation efficiency for Fe(VI)-reactive contaminants (CBZ or phenol), but showed limited efficacy for ClO − reactive pollutants (SMX), because the reaction of Ca(ClO) 2 with SMX was more favorable than that of Fe(VI) with SMX. The microplastics (MPs) removal achieved by the Ca(ClO) 2 /Fe(VI) oxidation system (86 %) was also higher than the sum values (65.69 %) achieved by each individual reactant, indicating the synergy of Ca(ClO) 2 and Fe(VI) could enhance coagulation and improve the removal efficiency of microplastics. Moreover, the UV 254 , electron-donating capacity (EDC), and turbidity removals by Ca(ClO) 2 /Fe(VI) oxidation system from simulated source water (36 %, 53 % and 32 %) and real source water (48 %, 86 % and 53 %) were higher than those by Fe(VI) alone (26 %, 43 % and 21 %). This study provided novel insights into optimizing Fe(VI)-based systems applied for pre-oxidation process in drinking water treatment.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Zongbo Zhang,Shiliang Song,Yan Ding,Jianhai Yu,Wenting Wu,Jin Li,Xin Wang,Yong Guo,Liang Gong
The precise and controllable preparation of carbon nanomaterials under mild conditions poses a great challenge, especially for metal-catalysed multiphase preparation. This work proposes an efficient method that utilizing high-density ultrasound to enhance the liquid-liquid interfacial reaction system. Iron-doped carbon dots (Fe-CDs) are successfully synthesized in such a normal temperature and atmospheric-pressure reaction condition. It is shown that transient cavitation provides a high-temperature and high-pressure microenvironment for the preparation of Fe-CDs. Moreover, the size of the reactant droplets is reduced from 200.0 ± 17.3 μm to 8.1 ± 2.9 μm owing to the acoustic flow and cavitation effects, which increases the specific surface area of the two reacting phases and improves the mass transfer coefficient by more than 252.0 %. As a result, the yield increases by more than an order of magnitude (from 0.7 ± 0.1 % to 11.9 ± 0.2 %) and the Fe doping rate reaches 20.9 %. The photocatalytic oxidation conversion of 1,4-Dihydropyridine (1,4-DHP) using the obtained Fe-CDs is as high as 98.2 %. This research gives a new approach for the efficient and safe production of Fe-CDs, which is promising for industrial applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Yudong Zhang,Yuan He,Jun Li,Yang Xu,Yang Yang,Yao Ge,Xun Zhu,Qiang Liao
Optimizing non-noble catalysts for the oxygen reduction reaction (ORR) is crucial for advancing energy storage and conversion technologies. This study investigates the influence of iron valence states and nitrogen precursor contents on the physicochemical properties and electrochemical performance of lignin-based Fe–N–C catalysts. Catalysts are synthesized using different valence iron sources and varying pyrrole contents. The results reveal that iron(II) doping increases microporosity and specific surface area, while iron(III) doping enhances mesoporous and iron contents of the carbon materials. XPS and Raman spectroscopy confirm the successful incorporation of Fe–Nx active sites in the as-prepared LFeIIIPx catalysts. Electrochemical tests demonstrate that LFeIIIP10 exhibits the highest ORR activity, surpassing commercial Pt/C in half-wave potential (E1/2) and limiting current density (JL). The direct formate fuel cell (DFFC) with an LFeIIIP10 air cathode achieves a maximum power density of 24.7 mW cm–2, 32% higher than that with a Pt/C cathode. This study highlights the critical role of tailoring iron valence states and nitrogen levels to develop high ORR performance, cost-effective Fe–N–C catalysts, providing valuable insights for the future design of non-noble metal catalysts in energy applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 15
·1-11
·
IF 2.8
Zhang Lichen,Lin Jie,Wang Xintong,Zhu Xinxin,Ding Yihong,Jin Huile,Zeng Tianbiao
Tin-based sulfides, such as SnS 2 , have garnered attention as lithium-ion anode materials due to their layer structure and high conductivity capacity. However, during the lithium alloying/dealloying cycles, SnS 2 material exhibits a rapid capacity decay due to the volume expansion, which hinders the application of SnS 2 . In this study, a heterostructure composite material anchored on exfoliated graphite, designated as nano SnS 2 S 3 /Sn 3 S 4 /FeS/Fe 7 S 8 anchored on 15.0 wt% exfoliated graphite (FSS/G-15%), was synthesized by heating a mixture of inexpensive reducing agent Fe powder and SnS 2 powder, followed by ball milling with 15.0 wt% commercial graphite. Experimental results demonstrated that FSS/G-15% had exhibited optimal overall Li + storage performance, achieving approximately 1306.7, 1199.2, 1033.1, 882.3, 707.3, 507, 366.3, 255.6, and 203.5 mA hg −1 at current densities of 0.1, 0.2, 0.5, 1, 2, 4, 6, 8, and 10 Ag −1 , respectively, surpassing the majority of SnS 2 -based anode materials. The simplicity and efficiency of the synthetic method may have potential implications in various fields in the future.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2025
·
IF 9.8
Sijie Liu,Renda Wang,Ping Yu,Kun Liang,Li Wang,Mengyu Gao,Yang Si,Chuang Zhu,Fangfang Ge,Bingsheng Li
In this study, molybdenum (Mo) coatings were deposited on 304 stainless steel (304SS) plates using magnetron sputtering. Subsequently, the samples were annealed at 800 °C under vacuum for varying durations to enhance adhesion strength and thermal stability. Immersion tests were conducted at 700 °C for up to 800 h. After 200 h of immersion, the weight loss of the annealed Mo-coated 304SS was significantly reduced from approximately 11 mg/cm 2 to about 0.44 mg/cm 2 . The Mo-enriched layer effectively suppressed the outward diffusion of alloy elements and facilitated the formation of Cr 2 O 3 by trapping Cr in the interdiffusion layer. Additionally, the Mo 3 Fe 3 O phase formed on the coating surface via diffusion reaction exhibited certain corrosion-resistant properties. Obvious interfaces emerged within the interdiffusion layer, and their formation mechanisms were analyzed. After four thermal cycles (with a 200-h interval), partial delamination of the Mo-enriched layer in the annealed Mo-coated 304SS was observed. This may have resulted from the substantial growth stress of Cr 2 O 3 and the significant mismatch in thermal expansion coefficient between Mo coating and 304SS.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Junjun Lv,Panpan Liu,Rushuo Li,Linmeng Wang,Kaiyue Zhang,Peiyun Zhou,Xiubing Huang,Ge Wang
A series of self-supported electrocatalysts composed of tri-metallic CoFeV-LDHs generated on conductive carbon cloth (denoted as CoFeV@CC) have been constructed. The specific interaction among Co, Fe and V is systematically revealed via tuning the molar ratios of M 2+ :M 3+ and Fe 3+ :V 3+ in these tri-metallic LDHs. Finally, the optimal synergistic effect is reached when the molar ratios of M 2+ :M 3+ and Fe 3+ :V 3+ are respectively 4:1 and 1:1, resulting in the product named Co 8 FeV@CC, which displays the best overall OER and HER performance. Only rather low overpotentials of 235 and 182 mV are required to attain the current density of 100 mA cm −2 with a Faradaic efficiency of nearly 100 % for OER and HER, respectively. Co 8 FeV@CC can thus be applied as both an anode and cathode in the symmetrical two-electrode and possesses a current density of 100 mA cm −2 at the cell voltage of 1.65 V, and further demonstrates ultra-high stability for 100 h.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Weikang Zhu,Yabiao Pei,John C. Douglin,Junfeng Zhang,Haoyang Zhao,Jiandang Xue,Qingfa Wang,Ran Li,Yanzhou Qin,Yan Yin,Dario R. Dekel,Michael D. Guiver
Recently, much work has been devoted to designing catalysts with high porosity and efficient active sites. Although very promising results are achieved using Co/Fe–N–C catalysts based on rotating disk electrode (RDE) tests, actual fuel cell performance is below expectations, probably due to insufficient understanding of the catalyst layer (CL). Therefore, catalyst design should be considered holistically by taking into account CL performance, not only intrinsic activity. Here, Co/Fe–N–C with highly dispersed CoFe nanoalloy in the carbon network is obtained by careful design of Co/Fe-ZIF precursor, resulting in a high oxygen reduction reaction (ORR) site density with good stability. Concerning RDE test in the kinetic region and single cell test (SCT) with complex influence factors, the half-cell test (HCT) is introduced to more accurately evaluate the quality of the Co/Fe–CL. Multi-scale measurements (RDE, HCT and SCT) in different current density ranges allows targeting the key CL influence factors for fuel cell performance.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Baozhen Li,Jun Zuo,Tiantian Liu,Mengjia Zhu,Kun Jiang,Zhuangzhuang Ren,Hua Yang,Yu Tang,Li Tan,Lizhi Wu
The mildly selective oxidation of methane to oxygenates in the aqueous phase is of great significance for methane upgrade, while it suffers low conversion and multiple oxidation products. Fe-based zeolite, especially Fe/ZSM-5 with heteroatom Al is the most widely investigated catalyst for this reaction, while the Fe supported pure Si-based zeolite without Al is rarely reported. Herein, a series of Fe-S-1 catalysts without introducing heteroatom Al is synthesized via facial dissolution-crystallization method and applied for methane selective oxidation to formic acid. The optimized 0.5Fe-S-1 shows a superior performance with the formic acid space time yield of 49751 µmol·g cat −1 ·h −1 and a liquid-phase formic acid selectivity of 93 % at 70 °C with H 2 O 2 as the oxidant, and present an excellent stability without obvious deactivation after five cycles, which outperforms all previously reported Al-free Fe/Silicalite-1 catalysts, and is comparable with conventional Fe/ZSM-5. Combined with multifarious characterizations including TEM, UV-Vis, Raman, NH 3 -TPD, Py-IR and XAS etc., two kinds of Fe species including the mononuclear tetrahedrally coordinated framework Fe 3+ species and mononuclear octahedral coordinated extra-framework Fe 3+ species are highly dispersed over Fe-S-1 even with a high Fe loading of 1.5 wt%, in which the framework Fe 3+ species content is positively correlated with the catalyst acidity and could provide acid sites to adsorb reactants and then extra-framework Fe 3+ species could activate methane/H 2 O 2 effectively. And the further EPR, in-situ FT-IR characterizations and control experiments demonstrates that the methane selective oxidation to formic acid follows a radical mechanism, in which ·CH 3 combines with ·OH or ·OOH to form CH 3 OH, and then further oxidized to HCOOH and finally over-oxidized to CO 2 .
✓ 已验证
产品关联
DOI
高影响因子