Journal of Food Measurement and Characterization
·
2025
·
IF 3.3
Cao Qingqing,Li Xiaoxue,Zhang Qian,Liu Guishan
This study investigated the effects and underlying mechanisms of different concentrations of Lycium barbarum leaf flavonoids (LBLF) (0%, 0.01%, 0.1%, and 1%) on the reduction of warmed-over flavor (WOF). The odor distribution of bowl-steamed Tan lamb was analyzed using gas chromatography-mass spectrometry and gas chromatography-ion mobility spectrometry. The degree of protein and lipid oxidation was evaluated through physicochemical indicators. According to the analysis of flavor indicators, 1-octen-3-ol, hexanal, octanal and nonanal were identified as WOF during the storage period. The peroxide value (meq/kg fat) exhibited a significant increase ( P < 0.05) from 0.99 to 5.77 during both the before refrigeration (BR) and microwave reheating (MR) stages. Notably, during the BR stage, the thiobarbituric acid reactive substances (TBARS) values of bowl-steamed Tan lamb samples treated with antioxidants were significantly lower ( P < 0.05) compared to those of the control group. The results of the oxidation index measurements revealed that WOF production was due to the predominance of lipid oxidation, with a significant positive correlation between WOF and lipid oxidation products and a weaker correlation with protein oxidation. Moreover, when the LBLF concentration reached 0.1%, WOF was significantly inhibited. Additionally, LBLF contributed the characteristic flavor of bowl-steamed Tan lamb, including floral and herbal notes derived from terpenes and esters. In conclusion, LBLF mitigated WOF in bowl-steamed Tan lamb by inhibiting the formation of WOF precursors while masking residual off-flavors with its characteristic floral-herbal aroma profile.
✓ 已验证
产品关联
DOI
高影响因子
Nature Energy
·
2025
·
IF 60.1
Xiang Chunxu,Yuan Mingjun,Ding Chuan’an,Zheng Yuanyuan,Li Yize,Hu Xiaole,Zhang Jie,Li Xinyu,Ma Chengfeng,Wang Shaoying,Yan Weibo,Yang Chunlei,Huang Wei,Xin Hao
Solution processing has great advantages for emerging thin-film solar cells but remains a big challenge for multielemental inorganic films due to complicated phase evolution and grain growth during crystallization. Here we report the fabrication of uniform, large-area Cu 2 ZnSn(S,Se) 4 (CZTSSe) films and solar modules from solution. By tuning the thiourea/metal ratio to increase film porosity—thereby promoting more uniform vertical reaction and lateral grain growth—we improved the uniformity of CZTSSe films and achieved a single-cell efficiency of 13.4% and a solar module efficiency of 8.91%. We further optimized the module structure to reduce non-ideal contact and patterning-induced shunt and resistive losses, resulting in a champion CZTSSe module with a National Renewable Energy Laboratory-certified efficiency of 10.1%. This module also exhibits the lowest cell-to-module loss in open circuit voltage and current density among state-of-the-art emerging thin-film solar modules. Our work demonstrates the viability of solution processing to deposit uniform, large-area CZTSSe film and efficient solar modules, advancing the development of the technology.
✓ 已验证
产品关联
DOI
高影响因子
Nature Photonics
·
2025
·
IF 32.9
Jin Wangxiao,He Siyu,Lu Xiuyuan,Zhu Xitong,Liu Dijiong,Sun Guolong,Hao Yanlei,Chen Zuyan,Wang Chenyang,Zeng Jiejun,Zheng Zhi,Yan Xiaolin,Yan Yiran,Wu Longjia,Lin Xiongfeng,Hou Wenjun,Cao Weiran,Liu Chuan,Liang Xiaoci,Gao Yuan,Deng Yunzhou,Cao Kaisheng,Yang Yingguo,Gao Feng,Jin Yizheng
Solution-processed light-emitting diodes (LEDs) are appealing for their potential in the low-cost fabrication of large-area devices. However, the limited performance of solution-processed blue LEDs, particularly their short operation lifetime, is hindering their practical use in display technologies. Here we demonstrate that trace water in the device—previously considered detrimental to most solution-processed LEDs—dramatically enhances the performance of quantum-dot LEDs. This breakthrough stems from our comprehensive mechanism investigations into the positive aging phenomenon, a long-standing puzzle in the quantum-dot LED field. Our findings reveal that water passivation on the surface of electron-transporting layers, which are composed of zinc-oxide-based nanoparticles, improves charge transport and enhances exciton radiative recombination by suppressing hole leakage during device operation. Combined with the advanced top-emitting architecture, our blue quantum-dot LEDs achieve a high current efficiency of 37.1 cd A −1 , a blue index (colour-coordinate-corrected current efficiency) of over 490 cd A −1 \({{\rm{CIE}}}_{y}^{-1}\) and unprecedented stability, with an extrapolated T 95 lifetime (at an initial brightness of 1,000 cd m −2 ) of 287 h. Our work may inspire further exploration into surface passivation of nanocrystalline functional layers, critical for the advancement of emerging solution-processed optoelectronic and electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 10
·1-12
·
IF 5.3
Zhao Weiman,Fan Wenxiang,Liu Longchan,Gao Yingrui,Tong Ruonan,You Liying,Li Linnan,Wang Zhengtao,Yang Li
The precise and selective determination of ginsenosides, pharmacologically diverse saponins abundant in Panax species, is crucial for their therapeutic development and stringent quality control. However, inherent challenges, including their weak ultraviolet absorption and the high polarity imparted by sugar moieties, complicate their determination. Addressing these limitations, this study introduces the first-time construction and application of a boronate affinity dendritic mesoporous silica nanomaterial (BA-DMSN) as a highly efficient adsorbent for ginsenoside pretreatment. The synthesized BA-DMSN was comprehensively characterized, confirming a unique three-dimensional open dendritic framework, high specific surface area, and exceptional inner surface accessibility. These attributes facilitate rapid analyte adsorption and release, enabling a solid-phase extraction (SPE) process completed within approximately 10 min. Critically, the strategic incorporation of boronic acid groups conferred specific selectivity towards the cis-diol structures present in ginsenosides, allowing for their highly effective enrichment from complex matrices. Integrating this novel adsorbent with charged aerosol detection (CAD), a boronate affinity chromatography strategy was successfully developed and validated for the quantitative determination of nine key ginsenosides (notoginsenosides Fa, Fc, FP2, Fe, and ginsenosides Rc, Rd, Rb1, Rb2, Rb3) in stem-leaf extracts of Panax notoginseng. Methodological investigations demonstrated that this approach offers significant advantages over existing techniques, including operational simplicity, outstanding selectivity, and enhanced sensitivity, particularly for ginsenosides lacking strong chromophores. The successful analysis of actual Panax notoginseng samples underscores the robust applicability and promising prospects of the BA-DMSN-based SPE-CAD methodology for the quality control and further research of ginsenoside-based natural products. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Waste Disposal & Sustainable Energy
·
2025
·
IF 4.5
Sun Jiayou,Ding Tianyang,Zhao Xue,Wang Pengcheng,Chen Wen,Yu Jie
In this study, the dehydrochlorination reaction of polyvinyl chloride (PVC) was thoroughly investigated at various temperatures and reaction times. Ultraviolet–visible (UV–Vis) and Raman spectroscopies were employed to analyze the conjugated polyene sequences, and Fourier transform infrared spectroscopy (FTIR) was utilized to characterize the functional groups present in the intermediates. The results reveal that in the very initial stages, the dehydrochlorination reaction forms soluble and colored intermediates, primarily consisting of conjugated polyene sequences without crosslinking. As dehydrochlorination progresses, the products become completely insoluble and transform into highly crosslinked black hard chucks. The obtained dehydrochlorinated intermediates were then pyrolysed using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) to reveal their structures and decomposition mechanism. The core structure of the crosslinked intermediates is likely composed of cyclohexenes or cyclohexadienes. Among the aromatic compounds, benzenes and naphthalenes are the predominant categories with benzene being the most abundant. The crosslinking reaction inhibits benzene formation, leading to increased production of alkyl-aromatic compounds. This study proposes the structure of dehydrochlorinated intermediates and their decomposition mechanism, providing valuable insights for PVC recycling. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Communications Materials
·
2024
·Vol. 5
·期 1
·1-11
·
IF 7.5
Yao Chang,Yan Wuwen,Dong Ronglu,Dou Shaobin,Yang Liangbao
The self-assembly of noble metal nanoparticles into periodic structures has been a theme of great interest for surface-enhanced Raman scattering (SERS) and use in functional devices. However, small nanoparticle self-assembly faces numerous challenges in tunability, referring to controlling their structural properties like structure, gaps, and arrangement. These issues highlight the need for further research and development to enhance the tunability and stability of self-assembled small nanoparticles. Here, we report a general centimeter-scale superlattice assembly strategy for noble metal nanoparticles less than 15 nm in size. Not only is this monolayer superlattice assembly generally applicable to different kinds and sizes of noble metal nanoparticles, but also, the crystal plane spacing can also be quickly and conveniently controlled by changing the ethanol concentration. SERS results reveal that optimized superlattice membranes of noble metal nanoparticles possess high detection sensitivity and ordered hot spots. Therefore, our strategy offers prospects for high-performance SERS substrates based on small noble metal nanoparticle superlattices.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Minerals Metallurgy and Materials
·
2024
·Vol. 32
·期 2
·450-463
·
IF 5.6
Zhang Wenxi,Zhuo Zhangzelong,Xu Dan,Wu Liang,Xie Zhihui
We have developed a superhydrophobic and corrosion-resistant LDH-W/PFDTMS composite coating on the surface of Mg alloy. This composite comprised a tungstate-intercalated (LDH-W) underlayer that was grown at low temperature (relative to hydrothermal reaction conditions) under atmospheric pressure and an outer polysiloxane layer created from a solution containing perfluorodecyltrimethoxysilane (PFDTMS) using a simple immersion method. The successful intercalation of tungstate into the LDH phase and the following formation of the polysiloxane layer were confirmed through X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The corrosion resistance of the LDH-W film, both before and after the PFDTMS modification, was evaluated using electrochemical impedance spectroscopy (EIS), Tafel curves, and immersion experiments. The results showed that Mg coated with LDH-W/PFDTMS exhibited significantly enhanced corrosion protection compared to the unmodified LDH-W film, with no apparent signs of corrosion after exposure to 3.5wt% NaCl solution for 15 d. Furthermore, the LDH-W/PFDTMS coating demonstrated superior superhydrophobicity and self-cleaning properties against water and several common beverages, as confirmed by static contact angle and water-repellency tests. These results offer valuable insights into preparing superhydrophobic and corrosion-resistant LDH-based composite coatings on Mg alloy surfaces under relatively mild reaction conditions.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2024
·
IF 3.1
Wang Yunfei,Gao Shanjun,Yin Nian,Chen Yuhan,Shen Chunhui,Yu Yi
A new hyperbranched charring-foaming agent (PCAT) containing triazine and triazole groups was successfully synthesized and characterized, and its special pyrolysis behavior was analyzed. It was combined with PAPP as an acid source to form an intumescent flame-retardant system. The composite with 20% flame retardants containing PAPP/PCAT (3:1) showed better flame-retardant and smoke suppression properties. The LOI of the PP/PAPP/PCAT composite increased to 30.2% and achieved UL-94 V-0 rating when the mass ratio of PAPP/PCAT was 3:1. In cone calorimetry experiments, it was demonstrated to reduce PHRR and THR by 84.7% and 48.9%, respectively. Meanwhile, the PSPR and TSP were also reduced by 77.9% and 56.2%, respectively, relative to PP. This indicates that the PP modified by partially doping PCAT in PAPP has significantly enhanced heat dissipation and smoke suppression performance, thus performing higher fire safety. In terms of FRI, PP/PAPP/PCAT composite was considered to be of “good” flame retardancy. Thermal gravimetric analysis demonstrated that PCAT significantly improved the char yield of PP when combined with PAPP. The morphology and properties of the residue showed that PP/PAPP/PCAT could produce a significant expanded foam insulating carbon layer, and the graphitization degree of the residual carbon was enhanced. The investigation of their water resistance demonstrated that the PP/PAPP/PCAT composite still obtained a UL-94 V-0 rating after 168-h soaking in water.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Information Sciences
·
2024
·Vol. 67
·期 5
·1-7
·
IF 7.3
Zhang Yong,Wei Xin,Gao Lei,Zhao Weijie,Sun Changjiu,Wei Junli,Yuan Mingjian,Ni Zhenhua,Lu Junpeng,Liu Hongwei
The wider color gamut represents the better reproducibility of the real natural colors. Perovskite materials exhibit promising potential in full-color wide-gamut displays because of the wide tunability and high saturability of their photon emission. However, the full-color wide gamut (>100% Rec.2020) has not been constructed due to the lack of the extreme red primary color (∼700 nm). Herein, the widest color gamut is realized, wherein α -CsPbI 3 is used to generate the extreme red primary color. An in-situ encapsulation approach is advised to stabilize α -CsPbI 3 at room temperature by means of polyvinylpyrrolidone (PVP). The α -CsPbI 3 encapsulated by PVP (denoted as P-CPI) shows highly saturated (FWHM (full width at half maximum) ∼28 nm) and extremely (∼697 nm) red emission. The green emission is provided by P-CPBr (CsPbBr 3 with PVP) which is also synthesized using the universal in-situ encapsulation approach. With the assistance of a commercial GaN chip, the RGB gamut is extended to the widest (151% NTSC, 113% Rec.2020).
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2024
·Vol. 16
·期 1
·1-17
·
IF 31.6
Liu Xianyuan,Zhou Jinman,Xue Ying,Lu Xianyong
Hierarchical Fe 3 O 4 -Fe@CNFs/Al-Fe 3 O 4 -Fe nanocomposites were constructed by in situ growth, vacuum-assisted filtration, and self-reduction methods.
The carbon framework, with in situ grown magnetic nanoparticles, supports two-dimensional magnetic nanosheets, achieving excellent electromagnetic performance and good impedance matching.
Excellent reflection loss value (− 59.3 dB), broadband wave absorption (5.6 GHz at 2.2 mm thickness), and low radar cross-section value were achieved.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Science China-Chemistry
·
2024
·Vol. 67
·期 5
·1653-1663
·
IF 10.4
Yang Zhen,Wang Xianheng,Bai Wanjie,Zou Zikun,Wu Haoxing,Li Yiwen
Manipulating the energy structure of materials represents an efficient way to regulate their light absorption behaviors. For example, constructing donor-acceptor (D-A) structures to increase the polarizability and reduce the energy bandgap of local molecules has been widely used in the field of organic photovoltaics with ordered structures. Remarkably, even in disordered and chaotic systems such as melanin-like polydopamine (PDA), visible and near-infrared light absorption can be significantly improved using this strategy. However, there has been a noticeable dearth of research on the ultraviolet (UV) light absorption regulation of bioinspired polymers with disordered and chaotic architectures by tailoring the D-A microstructures. In this study, a series of benzoheterocyclic molecules with strong electron-donating features screened by molecular simulation calculations were involved in disrupting the D-A structures within PDA. The destruction of D-A structures promoted the increase of the energy band gap and finally boosted the UV absorption of PDA. The resulting PDA nanoparticles with enhanced UV absorption were further employed to fabricate UV shielding composite films to protect the growth of plants from harmful UV radiation. This research may open up new avenues for structural disruption of bioinspired polymers for enhanced photoprotection applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2024
·
IF 1.5
Bao Ping,Wang Xiaowei,Men Jinfeng,Hu Zhilin
In order to effectively remove Co 2+ from radioactive wastewater, β-cyclodextrin/graphene oxide (β-CD/GO) was synthesized. The factors affecting the adsorption of Co 2+ in water were determined by static adsorption experiments, and the synthesis and adsorption mechanism of the materials were discussed by using Density Functional Theory (DFT). The results show that β-CD and GO are mainly bonded by ester group and hydrogen bond, the adsorption of Co 2+ by β-CD/GO belongs to single molecular layer chemisorption, and the intramolecular diffusion is the main factor of affecting the adsorption rate. The adsorption capacity of Co 2+ can reach 95.83 mg/g under appropriate conditions, but it will be affected by interference ions.
✓ 已验证
产品关联
DOI
高影响因子