JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Shuyue He,Jincheng Dai,Gang Liu,Xiyu Song,Hongjuan Zhang,Ruyi Xie
The persistent accumulation of organic pollutants in aquatic environments poses serious risks to ecosystems and public health. In this study, a double Z-type photocatalyst BiOBr/BiOI/MIL-53(Fe)-min was successfully fabricated by a two-step solvothermal-hydrothermal synthesis method. Characterization revealed tightly stacked BiOBr/BiOI nanosheets uniformly coating rod-like the 2-methylimidazole-modified metal–organic framework MIL-53(Fe) (MIL-53(Fe)-min), forming a core-shell structure with intimate interface contact. The formation of a unique double Z-type heterojunction significantly inhibited the recombination of photogenerated electron-hole pairs and optimized the charge carrier transfer pathway. Meanwhile, the surface stacked catalyst nanosheets not only improve the utilization efficiency of photons, but also greatly increase the contact area between active radicals and reactants. Under visible light irradiation, BBF-20 composite photocatalyst demonstrated a tetracyclines (TC) degradation rate of 90.6% within 100 min, with 80.3% of its activity retained after five cycles. Notably, polyethylene terephthalate (PET) microplastics achieved 56% weight loss after being treated by BBF-20 for 8 h. The main active species during degradation process were determined through quenching experiment and EPR tests. HPLC-MS analysis proposed the possible degradation pathways for TC and PET microplastics. Based on experimental results, a double Z-type heterojunction mechanism was proposed. This work presents a novel strategy for designing efficient photocatalysts to degrade antibiotics and microplastics in complex aquatic environments.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yingying Zhang,Qiang Huang,Ruoting Wang,Xinjie Du,Yu Yu,Zhe Chen
Modulating the coordination environment of single-atom catalysts (SACs) and designing architectures to maximize the exposure of active sites are pivotal strategies for enhancing peroxymonosulfate (PMS) activation. The fabrication of single-atom‑iron catalysts on support with particular coordination is essential but still remains challenge. Herein, we proposed the construction of single-atom‑iron embedded in graphitic carbon nitride nanosheets (SA-Fe@C 3 N 4 ) catalyst. The layer-confined synthesis strategy realized the loading of single-atom irons and ultrathin C 3 N 4 nanosheet formation in the interlayer of layered template RUB-15. XANES analysis corroborated that the isolated iron atoms are coordinated with three nitrogen and one oxygen atoms (Fe-N 3 O 1 ). Notably, the single iron atoms within the SA-Fe@C 3 N 4 matrix serve as the predominant active sites for PMS activation. The catalyst exhibited exceptional activity for the degradation of sulfamethoxazole (SMX), achieving a mass-normalized rate constant ( k Fe ) of 1.54 × 10 5 min −1 mol −1 with high selectivity toward 1 O 2 /•O 2 − .Theoretical calculations revealed that the Fe-N 3 O 1 moiety accelerated the PMS adsorption and reduced energy barriers for the activation of PMS, thus produce key *O intermediate SO 5 •- and form 1 O 2 /•O 2 − with nearly 100% selectivity. This study supplied a simple avenue to fabricate single-atom‑iron on C 3 N 4 with regulated coordination for wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2026
·
IF 7.9
Pengfei Wang,Chuanhui Geng,Li Shao,Mei Liu,Qian Li,Kecun Ma,Zhi Chen,Qingguo Chen
Water pollution has been worsened by increasing human activities, involving both water-soluble and non-water-soluble contaminants. In this study, a Fe-N-C@ZnO activated PS-AOP (persulfate advanced oxidation process) system was developed through the combination of photocatalysis and PS (persulfate) activation for pollutant degradation in freshwater and seawater. First, the optimal performance was determined by adjusting the Fe-N-C@ZnO to PS ratio, with the best results achieved at 5:3. The degradation efficiency and mechanisms were then examined across different pollutant types. Higher degradation rates were observed in the Fe-N-C@ZnO activated PS-AOP system compared to PS alone, in freshwater, improvements of 70.87%, 61.63%, and 46.26% were recorded for enrofloxacin (ENR), naphthalene, and crude oil, respectively. And in seawater, the increases were 57.53%, 46.87%, and 31.49%. Through radical quenching experiments, h⁺, e⁻, and SO 4 ·⁻ were identified as the dominant reactive species. Additionally, DI-MS analysis was used to propose four degradation pathways for ENR (three Piperazine-Routes and one Quinolone-Route) and two pathways for naphthalene (Benzene ring hydroxylation and Tautomerization). Download: Download high-res image (198KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Food Packaging and Shelf Life
·
2026
·
IF 10.8
Tao Yu,Long Cheng,Yini Zhao,Long Gu,Hangfei Gao,Zicen Liu,Li Huang,Shuyan Bai,Dongli Qin,Peng Wang,Aimin Wang,Haijiao Xie,Gefeng Xu,Na Niu,Ligang Chen,Lei Gao
The high protein content of Oncorhynchus mykiss , despite its nutritional value, poses a risk of microbial contamination and foodborne illnesses in fresh products, thus necessitating paramount importance for effective preservation. In this study, a synergistic preservation system possessing both antimicrobial and antioxidant functions was developed from pomelo peel. Enzyme-like material with peroxidase-like activity (K/Fe-PP) were synthesized from pomelo peel, KCl and FeCl 3 via a hydrothermal method. These enzyme-like materials catalyze the continuous generation of hydroxyl radicals (▪OH) from H 2 O 2 , enabling sustained bacterial inhibition. An ethanol extract of pomelo peel, harnessing the strong reducing power of its enriched phenolic compounds, was used to inhibit lipid oxidation in fish. To realize their synergy, the K/Fe-PP and the pomelo peel extract were added into a chitosan matrix, which served as a carrier, and were subsequently fabricated into a composite cling film (CS/K/Fe-PP).CS/K/Fe-PP films were applied to Oncorhynchus mykiss under refrigerated storage. The spoilage of Oncorhynchus mykiss was assessed by the value of malondialdehyde (MDA), acid value, total volatile basic nitrogen (TVB-N), histamine content, and total viable count (TVC). It was shown that the optimal cling film extended the storage time of Oncorhynchus mykiss by 3–6 days. This work not only provides a new strategy for applying catalysis based on enzyme-like materials in aquatic product preservation but also establishes a sustainable approach for the high-value utilization of waste biomass resources.
✓ 已验证
DOI
高影响因子
Environmental Technology & Innovation
·
2026
·
IF 7.3
Junjie Su,Qi Yang,Yanlun Chu
The remediation of water bodies co-contaminated with heavy metal and chlorinated organic pollutants presented significant technical challenges. In this work, a Ni/Fe@Fe 3 O 4 and an ultrasound-assisted Ni/Fe@Fe 3 O 4 co-removal reaction system were established for the simultaneous removal of co-existing pollutants carbon tetrachloride (CT) and hexavalent chromium (Cr(VI)). Results demonstrated that CT promoted Cr(VI) removal, while Cr(III)/Fe(III) oxides/hydroxides (Cr(VI) reduction products) formed on the surface of Ni/Fe@Fe 3 O 4 effectively inhibited the CT degradation. The ultrasound significantly enhanced the Ni/Fe@Fe 3 O 4 co-removal reaction system, accelerating complete Cr(VI) removal and boosting CT removal efficiency from 69.24% to 95.62%. Ultrasound treatment improved the long-term reactivity of Ni/Fe@Fe 3 O 4 , achieving consistent 100% removal of Cr(VI) with only a marginal 5.56% decrease in CT removal efficiency over five cycles. Ultrasound and Ni/Fe@Fe 3 O 4 had a significant synergistic effect on the removal of pollutants, with a synergy index of 2.06. The enhancement mechanism of ultrasound on co-contamination removal by Ni/Fe@Fe 3 O 4 included: (1) improving nanocomposite dispersibility and optimizing the reaction interface; (2) removing the passivation layer on the surface of Ni/Fe@Fe 3 O 4 to expose more active sites.
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2026
·
IF 8.2
Ruilin Ding,Hai Lin,Yinying Wu,Xuyuan Dong,Yangwei Fan,Longxia Chen,Gaochen Lan,Yu Shi,Meichen Wang,Enxiao Li
Virus-mimetic hollow Gd-Fe nanocarriers enable co-delivery of cisplatin and TGF-βRI inhibitor for synergistic chemo-ferroptosis therapy. • The nanoparticle trigger iron-dependent cell death while blocking TGF-β signaling, synergistically suppressing tumor growth. • The nanoparticle overcomes resistance to immune checkpoint therapy by shifting the tumor microenvironment toward an immune-active state. Ovarian carcinoma remains poorly responsive to immune checkpoint blockade, partly because of a TGF-β-enriched and immunosuppressive tumor microenvironment. Here, we developed a virus-mimetic hollow Gd-Fe nanocarrier for the co-delivery of cisplatin (DDP) and the TGF-β receptor I inhibitor TGFβRI-IN-3 (IN-3), aiming to integrate chemotherapy, ferroptosis induction, and TGF-β pathway blockade into a single therapeutic platform. DDP/IN-3@Gd-Fe nanoparticles (NPs) were prepared using a hard-template strategy. Cellular uptake, cytotoxicity, apoptosis, and ferroptosis-associated biochemical changes were evaluated in SKOV3 cells. In tumor-bearing mice, biodistribution, T1-weighted MRI contrast, biosafety, and antitumor efficacy were further investigated. The prepared NPs exhibited uniform size, good stability, and high drug loading with sustained release. In vitro , DDP/IN-3@Gd-Fe NPs were effectively internalized by SKOV3 cells and demonstrated superior cytotoxicity, apoptosis induction, and ferroptosis promotion compared to free drugs. In vivo , DDP/IN-3@Gd-Fe NPs exhibited the strongest tumor growth inhibition, involving synergistic induction of apoptosis and ferroptosis and effective suppression of the TGF-β signaling pathway. Finally, DDP/IN-3@Gd-Fe NPs were found to remodel the immunosuppressive TME by increasing inflammatory mediators and promoting tumor infiltration of cytotoxic T cells and dendritic cells. In conclusion, DDP/IN-3@Gd-Fe NPs provide an MRI-traceable chemo-ferroptosis platform that may attenuate TGF-β-associated immunosuppression and improve checkpoint blockade responses in ovarian carcinoma. Download: Download high-res image (168KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS & DESIGN
·
2025
·
IF 7.9
Wojciech Polkowski,Paolo Lai Zhong Lo Biundo,Jianmeng Jiao,Maria Wallin,Adelajda Polkowska,Filip Kateusz,Merete Tangstad
New ternary Fe-Si-B alloys were developed as potential metallic phase change materials (PCMs) for application in ultra-high temperature latent heat thermal energy storage systems (LHTES). By a thermodynamic re-assessment of the Fe-Si-B system, three new Si-rich (approx. 40–50 wt%) compositions were pre-selected for further analyses. The new alloys can provide very high energy density (even above 1 MWh/m 3 ) at melting temperatures around 1150–1200 °C. Furthermore, new PCM candidates have twice lower B content than already developed Fe-26Si-9B alloy, what is beneficial from the economic point of view. For the sake of experimental validation, the PCM candidates were produced by the arc melting technique. The outputs of thermodynamic calculations were verified in detailed microstructural studies and differential scanning calorimetry experiments. In the case of the newly developed Fe-46Si-5B and already designed Fe-26Si-9B alloy, the energy density higher than 1 MWh/m 3 was experimentally confirmed.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Shuyang Zhou,Zhongyu Ren,Lin Yang,Chenglin Zhu,Wenxiu Xie,Xueyang Feng,Qi Jing
Tetracycline (TC) has attracted significant attention due to its persistence and widespread occurrence in aquatic environments, making the development of efficient removal strategies essential. In this study, an Fe-ZIF-67@CNF/CS composite aerogel with high-efficiency adsorption and catalytic performance was developed. Fe²⁺ doping introduced additional catalytically active sites while preserving ZIF‑67’s excellent adsorption performance, and the 3D porous nanofiber/chitosan (CNF/CS) aerogel effectively anchored Fe‑ZIF‑67 to prevent aggregation and enhance water stability. Both adsorption and PMS-catalyzed experiments demonstrated excellent TC removal, with a maximum adsorption capacity of 500.2 mg·g −1 and 91.2 % degradation within 30 min under low catalyst loading, across a broad pH range. These outstanding performances stem from adsorption-catalysis synergy: adsorption is driven by electrostatic attraction, hydrogen bonding, π-π stacking, and coordination, while degradation proceeds via rapid ROS generation under bimetallic Fe/Co synergy following adsorption enrichment. Based on the temporal contributions of adsorption and catalysis, the system mechanism for synergistic TC removal was elucidated. LC-MS analysis of TC degradation intermediates identified three degradation pathways and assessed their potential hazards. This work proposes a novel strategy for enhancing TC removal efficiency in water by optimizing adsorption-catalysis synergy.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2025
·
IF 12.4
Xiao Luo,Yihan Li,Xiaoke Ma,Tapas Sen,Lin Zhao,Yongkui Yang,Peizhe Sun
The individual Fe(VI) as FeO 4 2- or peroxydisulfate (PDS) oxidation process faces challenges of limited oxidation efficiency, excessive dosage consumption, and a narrow pH range. Fe is an important component in both Fe(VI) oxidation and PDS activation. We propose linking Fe in the combined Fe(VI)/PDS process to address the challenges of their individual processes. The contribution of Fe species to reactive oxygen species (ROS) production in the Fe(VI)/PDS process and the regulatory effects of quinones on Fe species in the Fe(VI)/PDS-benzoquinone (BQ) process were investigated. The reactive oxidation species generated by the Fe(VI)/PDS process included high-valency iron species such as Fe(VI), Fe(V), and Fe(IV); hydroxy radicals (∙OH), singlet oxygen ( 1 O 2 ), and SO 4 ˙ˉ contributed differently at varying pH levels. PDS accelerated the conversion of Fe(VI) to Fe(V) and Fe(IV), which are more reactive, and facilitated their regeneration from Fe(III) and Fe(II). The Fe(II) concentration in the Fe(VI)/PDS process increased by 35.0% after BQ addition, which enhanced PDS activation and shifted the dominant oxidizer from high-valency iron to ROS. In the Fe(VI)/PDS-BQ process, norfloxacin underwent oxidative degradation via piperazinyl ring degradation, defluorination, and quinolone group degradation, as evidenced by degradation byproducts and further supported by density functional theory calculations. The Fe(VI)/PDS-BQ process significantly reduced the toxicity of norfloxacin. A novel Fe(VI)/PDS-BQ process was developed with the potential to eliminate antibiotics from water and to identify the Fe-involved oxidation mechanism regulated by BQ addition and pH.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Jingbo Su,Aoqi Xing,Junxu Hu,Yun Wu,Jinghui Zhou,Jingyu Xu,Xing Wang
In response to water scarcity and energy crises, solar-driven interfacial evaporation technology offers a highly promising industrial solution for seawater desalination due to its “zero energy consumption” and environmentally friendly characteristics. The aromatic ring structure of lignin exhibits excellent light absorption properties, making it a highly suitable material for interfacial evaporation photothermal applications. This study employs electrospun lignin nanofiber membranes that have undergone high-temperature carbonization, with Fe₃O₄ nanoparticles in situ loaded onto their surfaces to form a photothermal layer. Polyvinylidene fluoride (PVDF) serves as both a binder and hydrophobic modifier, bonding at the interface with delignified wood blocks (DW). Based on this design, the fabricated LCNFs/Fe₃O₄@DW evaporator achieves an evaporation rate of 1.76 kg·m −2 ·h −1 under one standard solar irradiance, with an evaporation efficiency of approximately 88.54%, outperforming most conventional wood-based or carbon-based photothermal evaporators. Long-term cycling tests and simulated seawater evaporation experiments demonstrate the material's excellent salt resistance and purification durability. In summary, this study not only validates the application potential of lignin-based nanofiber composites in solar thermal conversion but also achieves functional integration of “solar desalination, salt resistance and scale prevention, and water purification” through precise Janus surface design. It provides a novel strategy that combines environmental sustainability with practical applicability for industrializing solar-driven interfacial evaporation technology.
✓ 已验证
产品关联
DOI
高影响因子
Chemistry-An Asian Journal
·
2026
·Vol. 21
·期 1
·e70527
·
IF 3.3
Han Wang,Yue Zhong,Mingzhong Li,Yanwei Li,Cong Liu,Yanhui Li
Electrochemical overall water splitting is one of the main choices to realize hydrogen energy. In this study, a simple strategy of self-growth of carbon nanotubes with the tip end of Co nanoparticles compound Fe-Nx/mesoporous carbon as bi-functional electrocatalyst is proposed. At high temperature, cobalt nanoparticles catalyze the self-growth of nitrogen-doped carbon nanotubes with a tip of cobalt particles from a metal-organic framework ZIF-8. FeTAPc as Fe and N resource is further adsorbed on the shell and then re-carbonized under 900°C to fix Fe-Nx on the polyhedron carbon shell to form bi-functional electrocatalyst (Fe-Nx/Co-NC-900). Fe-Nx/Co-NC-900 showed good OER (330 mV) and HER (239 mV) overpotential. As a result, the porous structure of Fe-Nx/Co-NC-900 and the interconnected three-dimensional carbon network promote the material transport. The self-growing carbon nanotubes improve the conductivity of the electrocatalyst and avoid aggregation. The high dispersion of two kinds of metal atoms and the mixed growth of metal nanoparticles co-endowed Fe-Nx/Co-NC-900 electrocatalyst with rich activity. In addition, Fe-Nx/Co-NC-900 has been used to assemble an electrochemical overall water splitting with a driving voltage of 1.67 V, which shows its practical application in electrochemical overall water splitting. This study provides enlightenment in application of hydrogen energy production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
GREEN CHEMISTRY
·
2026
·
IF 9.2
zonghao xu,Zongyu Guan,Yan Song,Xiran Zhao,Yaodong Yuan,Zhipeng Yan,Junhang Tian,Xueyi Sun,Biwei Xiao,Weidong Zhuang
Direct recycling of spent LiFePO₄ (LFP) cathodes is a sustainable and energy-efficient strategy for recovering valuable materials while preserving the intrinsic olivine structure. Herein, we report a LiI-assisted regeneration approach that achieves electronic structure reconstruction and reinforced Fe–O d–p orbital hybridization, enabling simultaneous repair of structural defects and enhancement of Li⁺ transport kinetics. The reductive I⁻ ions promote Fe³⁺→Fe²⁺ conversion and effectively eliminate Fe–Li antisite defects, while Li⁺ replenishment restores the stoichiometry of degraded LFP. Density functional theory (DFT) calculations reveal that LiI triggers a downward shift of the Fe 3d band center and an upward shift of the O 2p band center, narrowing their energy separation and strengthening Fe–O covalency. These electronic modifications reduce Li⁺ migration barriers and reconstruct continuous Li⁺ transport channels, as further validated by ab initio molecular dynamics simulations. In-situ XRD measurements confirm reduced unit-cell volume fluctuations and enhanced FeO₆–PO₄ framework stability, demonstrating improved structural reversibility during cycling. Benefiting from this coupled structural–electronic reconstruction, regenerated LFP delivers 146.9 mAh g⁻¹ at 1 C and retains 97.4% capacity after 500 cycles, outperforming the spent material. This work proposes a green and low-energy direct regeneration route for cathode materials and provides important theoretical guidance for their efficient repair and regeneration.
✓ 已验证
产品关联
DOI
高影响因子