ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Yanyan Kong,Jiaxiang Sun,Ligang Gai,Xiaojuan Ma,Jianhua Zhou
Aqueous rechargeable batteries (ARBs) based on migration of two types of shuttle ions not only enrich the battery families but also make it more available for ARBs with operation potential higher than 1.2 V. In this paper, we report on electrochemical properties of ARBs in configuration of NaTi 2 (PO 4 ) 3 /C||LiMn 2 O 4 , i.e. NTP/C||LMO. NTP/C was prepared through a simple and scalable co-precipitation post annealing treatment method and featured with hierarchical structure, high specific surface area, and abundant mesopores. The electrochemical properties of individual anode and cathode were examined in 1 mol L −1 Li 2 SO 4 , 1 mol L −1 Na 2 SO 4 , and 0.5 mol L −1 Li 2 SO 4 /0.5 mol L −1 Na 2 SO 4 mixed electrolyte, respectively. It is found that NTP/C exhibits superior operation in 1 mol L −1 Na 2 SO 4 and inferior operation in 1 mol L −1 Li 2 SO 4 while the situation is contrary for LMO. However, NTP/C||LMO full cells with Li + /Na + -mixed electrolyte exhibit enhanced electrochemical performance, presenting an anode-dependant electrochemical behavior. When operating at 1C, NTP/C||LMO with Li + /Na + -mixed electrolyte can deliver a discharge specific capacity ( C dis ) of 104.6 mA h g −1 based on the weight of NTP/C, and a specific energy ( E cell ) of 59.5 W h kg −1 with corresponding specific power of 76.8 W kg −1 based on the total weight of active electrode materials. After 220 cycles at 1C, the C dis and E cell remain 75.7 mA h g −1 and 43.0 W h kg −1 , respectively.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Wei Song,Hanqing Zhao,Jianqi Ye,Mengmeng Kang,Siyu Miao,Zhong Li
Ti–O–C channels for ultrafast sodium storage were constructed in N/S-co-doped TiO2–C nanofibers, which deliver a high rate performance of 181.9 mAh g–1 at 5 A g–1 after 3000 cycles. The existence of Ti–O–C bonds at the interface of TiO2–C phases was revealed by synchrotron radiation X-ray absorption spectra. Based on this, first-principles calculations further verified the low energy barrier for Na+ insertion/extraction in the Ti–O–C channels formed by the intimately integrated graphite layer with TiO2 near the surface. In addition, surface defects induced by heteroatoms accelerate the Na+ mass transfer through the pathway from the carbon surface to the Ti–O–C channel.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Tao Liu,Lijun Xu,Xuejie Wang,Haoliang Lv,Bicheng Zhu,Jiaguo Yu,Liuyang Zhang
The natural abundance of sodium has fostered the development of sodium-ion batteries for large-scale energy storage. However, the low capacity of the anodes hinders their future application. Herein, carbon-encapsulated MnSe-FeSe nanorods (MnSe-FeSe@C) have been fabricated by the in-situ transformation from polydopamine-coated MnO(OH)-Fe 2 O 3 . The heterostructure constructed by MnSe and FeSe nanocrystals induces the formation of built-in electric fields, accelerating electron transfer and ion diffusion, thereby improving reaction kinetics. In addition, carbon enclosure can buffer the volumetric stress and enhance the electrical conductivity. These aspects cooperatively endow the anode with superior cycling stability and distinguished rate performance. Specifically, the discharge capacity of MnSe-FeSe@C reaches 414.3 mA h g −1 at 0.1 A g −1 and 388.8 mA h g −1 even at a high current density of 5.0 A g −1 . In addition, it still retains a high reversible capacity of 449.2 mA h g −1 after 700 long cycles at 1.0 A g −1 . Further, the ab initio calculation has been employed to authenticate the existence of the built-in electric field by Bader charge, indicating that 0.24 electrons in MnSe were transferred to FeSe. The in-situ XRD has been used to evaluate the phase transition during the charging/discharging process, revealing the sodium ion storage mechanism. The construction of heterostructure material paves a new way to design performance-enhanced anode materials for sodium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2016
·Vol. 4
·期 25
·10008-10013
·
IF 8.262
Jin-ling Ma,Xin-bo Zhang
Development of an efficient air cathode for metal–air batteries composed of an element that is abundant on earth is a scientific and technical challenge. Here, nitrogen (N)-doped carbon cathodes were prepared using two conventional doping methods, namely ammonia activation (ammoxidation) and introduction of an N-containing precursor. Interestingly, the introduction of N-containing precursors to prepare the N-doped carbon material not only gave a different pore distribution with increased surface area but also maintained considerable N content, unlike the use of the ammoxidation method – thus greatly enhancing the catalytic activity (low overpotential) and improving the discharge capacity (6905 mA h g−1) and cycle life (from 8 to 66 cycles) in sodium–oxygen batteries compared with the pure carbon material. This study also stresses the importance of adopting the optimized synthesis method to prepare the N-doped carbon cathode.
研究领域:
电化学
·
能源材料
·
纳米材料
·
电池技术
·
多孔材料科学
✓ 已验证
DOI
高影响因子
Nano Energy
·
2020
·
IF 16.602
Baoyu Sun,Shuaifeng Lou,Wei Zheng,Zhengyi Qian,Can Cui,Pengjian Zuo,Chunyu Du,Jingying Xie,Jiajun Wang,Geping Yin
Constructing robust 2D−based energy storage nanomaterials by well−defined pore architectures and rational surface modification are critical yet daunting challenges for rechargeable alkali−ion batteries. Herein, a new−type 2D interwoven multi pores decorated Co 3 O 4 @N−doped carbon nanosheet with rich surface defects is proposed as lithium/sodium ion anodes for the first time. The combining experimental researches, microscopic structure characterization and dynamics analysis demonstrate that the multi porous structure provides large numbers of channels to accelerate Li + /Na + transport, rational surface design creates abundant active sites for fast ions reactions, while robust carbon shell offers excellent ionic/electrical conductivity and structural integrity. The obtained bifunctional composites deliver superior rate performance and long−term cycle stability (~529 mA h g −1 after 2000 cycles in LIBs and ~166 mA h g −1 after 1700 cycles in SIBs) due to the synergistic contribution of the unique structure and surface defects . Furthermore, it still remains a high reversible capacity (>610 mA h g −1 after 1000 cycles) in full cell. Kinetic analysis reveals the designed anode exhibits prominent pseudocapacitive behavior, enabling ultra−fast lithium/sodium storage and ultrahigh−rate capability. This work offers valuable insights for developing high performance energy storage devices.
研究领域:
材料科学
·
电化学
·
纳米能源
·
储能技术
·
无机功能材料
·
先进电池
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2020
·
IF 6.155
Jiajia Ye,Xuting Li,Guang Xia,Guanghao Gong,Zhiqiang Zheng,Chuanzhong Chen,Cheng Hu
We report for the first time a Na-ion battery anode material composed of P-doped CoSe 2 nanoparticles (P-CoSe 2 ) with the size of 5–20 nm that are uniformly embed in a 3D porous honeycomb-like carbon network. High rate capability and cycling stability are achieved simultaneously. The honeycomb-like carbon network is rationally designed to support high electrical conductivity, rapid Na-ion diffusion as well as the accommodation of the volume expansion from the active P-CoSe 2 nanoparticles. In particular, heteroatom P-doping within CoSe 2 introduces stronger P-Co bonds and additional P-Se bonds that significantly improve the structure stability of P-CoSe 2 for highly stable sodiation/desodiation over long-term cycling. P-doping also improves the electrical conductivity of the CoSe 2 nanoparticles, leading to highly elevated electrochemical kinetics to deliver high specific capacities at high current densities. Benefiting from the unique nanostructure and atomic-level P-doping, the P-CoSe 2 (2:1)/C anode delivers an excellent cycle stability with a specific capacity of 206.9 mA h g −1 achieved at 2000 mA g −1 after 1000 cycles. In addition, this material can be synthesized using a facile pyrolysis and selenization/phosphorization approach. This study provides new opportunities of heteroatom doping as an effective method to improve the cycling stability of Na-ion anode materials.
研究领域:
材料科学
·
电化学
·
纳米能源材料
·
储能技术
·
无机功能材料
✓ 已验证
DOI
高影响因子
Green Energy & Environment
·
2020
·Vol. 7
·期 4
·734-741
·
IF 6.395
Huiqin Wang,Fengchu Zhang,Jing Xia,Fei Lu,Bo Zhou,Ding Yi,Xi Wang
Up to now, three kinds of ion-storage mechanisms are summarized towards anode materials in lithium/sodium-ion batteries, but they have low capacity and poor cyclic performance. Therefore, it is necessary to develop a new approach to optimize ion storage. Herein, we report an adsorption/desorption storage route through engineering electronic structure of cation-deficient Ti 1-x O 2 nanosheets. Ti 1-x O 2 nanosheets indeed exhibit higher capacity (332.1 mA h g −1 vs. 137.7 mA h g −1 for LIBs, 195.7 mA h g −1 vs. 111 mA h g −1 for SIBs), and more stable cyclic performance (296 mA h g −1 vs. 99 mA h g −1 for LIBs, 178.1 mA h g −1 vs. 80.2 mA h g −1 for SIBs after 100 cycles) at 0.1 A g −1 than TiO 2 nanosheets. Kinetics analysis and density functional theory (DFT) calculations reveal that electronic structures of vacancy within Ti 1-x O 2 nanosheets encourage a novel adsorption–desorption storage route. These results highlight the benefits of the engineered electronic structures within electrode material and implement novel ion-storage mechanism towards broad energy storage applications.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 26
·12109-12116
·
IF 3.3
Ming-Hui Cao,Ren-Yan Li,Fen-Fen Huang,Xin-Yin Cai,Miao Cui,Shi-Ya Lin,Jing-Yang Tian,Yuan-Ping Jiang,Zulipiya Shadike,Zheng-wen Fu
P2-Na0.6Li0.11Fe0.27−xMn0.62YxO2 (x = 0, 0.5%, 1%, and 2%) cathode materials were successfully prepared using a traditional solid-state method with ball milling-assisted modification. The effect of Y-doping on the crystal structure, grain size, morphology and sodium storage performance of Na0.6Li0.11Fe0.27Mn0.62O2 was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge cycling tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results demonstrated that the ball-milling pre-treatment method could effectively reduce the grain size and mitigate the aggregation of Na0.6Li0.11Fe0.27Mn0.62O2. Additionally, reasonable Y-doping (x = 1%) significantly enhances the rate capability and cycling stability of Na0.6Li0.11Fe0.27Mn0.62O2via improving the Na+ diffusion kinetics and the reversibility of the oxygen redox reaction. These results indicate that Na0.6Li0.11Fe0.26Mn0.62Y0.01O2 is a promising candidate material for high-rate and long-life cathodes for Na-ion battery application.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机固体化学
·
电池技术
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2018
·
IF 2.751
Li Li,Zhi Chen,Ming Zhang
We succeed in obtaining Mo 2 C embedded in S-doped carbon (Mo 2 C/SC) nanofibers by electrospinning and sulfuration. The use of S-doped carbon not only provides more additional Na + storage active sites to enhance its sodium storage performance, but also increases electrons migration and ions diffusion. As the anodes for sodium ion batteries (SIBs), the electrode exhibits excellent rate capacities of 242 and 96 mA h g −1 from 0.1 A g −1 to 5 A g −1 . Excitingly, the high-rate performance is superior, achieving 102.7 mA h g −1 at 5 A g −1 over 1000th cycle. This project provides ideas for the development the high-rate and long-term stable of the Mo 2 C in energy storage devices.
研究领域:
材料科学
·
储能
·
纳米技术
·
电化学
✓ 已验证
DOI
高影响因子
CRYSTAL GROWTH & DESIGN
·
2024
·
IF 3.2
Juhe Liu,Yuwei Chen,Mengran Sun,Wenhao Liu,Xianghe Meng,Jiyong Yao
Na3LuB8O15, the first sodium lutetium borate in the Na–Lu–B–O system, was prepared by the spontaneous crystallization method. Na3LuB8O15 is crystallized in the centrosymmetric triclinic space group P1¯ with the following cell parameters: a = 6.4047(12)Å, b = 7.3342(13)Å, c = 13.081(2)Å, α = 88.999(7)°, β = 78.631(8)°, γ = 66.622(7)°, and Z = 2. The general configuration of Na3LuB8O15 can be characterized as a network structure created by infrequent multiboron anion chain skeletons [B8O17] and [LuO7] polyhedra shared by oxygen atoms, where Na ions are filled in the pores to balance charges. According to a UV–vis-NIR spectrum investigation, the chemical has a short ultraviolet cutoff edge (185 nm). Thermal analysis reveals incongruent melting compound properties. In addition, a first-principles calculation was conducted to delve deeper into the correlation between the performance and the structure.
研究领域:
材料科学
·
无机化学
·
晶体学
·
光学材料
·
固态化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2015
·Vol. 3
·期 37
·19027-19032
·
IF 7.443
Wen-Wen Yin,Ji-Li Yue,Ming-Hui Cao,Wen Liu,Jing-Jing Ding,Fei Ding,Lin Sang,Zheng-Wen Fu
Metal–air batteries are important power sources for electronics and vehicles because of their remarkable high theoretical energy density and low cost. In this work, we firstly investigate the electrochemical properties of sodium air batteries (SABs) with the addition of ferrocene in the electrolyte. Combining charge–discharge measurements with field-emission transmission electron microscopy images of the discharged air cathodes, our results have demonstrated that two different pathways with ferrocene as an electrocatalyst and involved in the electrochemistry during the charge process might be governed by the morphological features of the electrode caused by the deposition of Na2O2 in SABs. The SAB with ferrocene as a catalyst exhibits a high cycling performance of up to 230 cycles with a high capacity of 1000 mA h g−1.
研究领域:
电化学
·
储能
·
电池技术
·
材料科学
✓ 已验证
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2026
·
IF 3.6
Shibo Meng,Dongshu Liu,Jiang Liu,Jiayi Zhang,Hanlin Li,Wenxian Liu,Fangfang Wu,Wenhui Shi,Zhiyuan Zeng,Xiehong Cao
Flexible aqueous zinc-based batteries (ZBs) are promising for wearable electronics but are hindered by low operating voltage and poor cycling stability. While zinc hexacyanoferrate (ZnHCF) represents a promising cathode candidate, its practical application is limited by rapid capacity decay. This failure is conventionally attributed to irreversible structural collapse. Herein, our findings depart from the prevailing view by demonstrating that degraded cathodes retain their structural integrity and recover capacity in specific media. We identify the primary failure mechanism as Zn 2+ entrapment induced by strong electrostatic interactions, distinct from lattice dissolution. Leveraging this insight, a dual-regulation strategy is proposed utilizing Na + co-intercalation to mitigate ion trapping and a quasi-solid composite hydrogel to suppress water activity. Consequently, a high full-cell voltage (1.8 V) Zn//ZnHCF battery is developed delivering exceptional stability over 4000 cycles. This work not only revises the fundamental understanding of ZnHCF degradation but also provides a robust pathway for high-performance aqueous energy storage. Graphical Departing from the prevailing view that ZnHCF degradation arises from irreversible structural collapse, this work identifies Zn 2+ entrapment induced by strong electrostatic interactions as the primary failure mechanism. By introducing Na + co-intercalation to mitigate ion trapping, ZnHCF reversibility is markedly enhanced, enabling a flexible 1.8 V Zn//ZnHCF battery with exceptional cycling stability supported by a quasi-solid composite hydrogel.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）