Journal of Materials Chemistry B
·
2025
·
IF 5.7
Jiale Zhang,Pengtao Chen,Jinlong Hu,Shuqing Wu,Yue Lin,Yao Lu,Junyu Xia,Jingcheng Wang,Jie Li,Yuan Liang
Implant-related infections (IRIs) pose a major challenge in orthopedic applications due to the persistence of biofilms, which are highly resistant to conventional antibiotics. This study introduces oxygen vacancy-engineered Zn–Fe spinel nanoparticles as microwave-responsive antibacterial agents. The oxygen vacancies in the spinel structure enhance reactive oxygen species (ROS) generation under microwave irradiation, providing a dual-mode antibacterial mechanism of thermal and oxidative stress. Zn–Fe spinel nanoparticles were synthesized using a sol–gel method and evaluated for their antibacterial efficacy against Staphylococcus aureus biofilms. Under microwave irradiation, the Zn–Fe spinel demonstrated significant biofilm disruption and bacterial eradication. Mechanistic studies revealed that oxygen vacancies promoted ROS generation, leading to bacterial membrane damage. In vivo experiments using a mouse infection model confirmed the material's antibacterial efficacy and biocompatibility, with no observed toxicity. This study highlights the potential of oxygen vacancy-enhanced Zn–Fe spinel as a microwave-assisted, antibiotic-free strategy for treating deep-seated infections associated with orthopedic implants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2025
·
IF 12.5
Yuefei Zou,Wanlin Wu,Tian Xia,Jiangqi Zhao,Qunhao Wang,Wei Zhang,Canhui Lu
To keep pace with the fast development of portable and wearable electronics, considerable public and scientific attentions have been paid to the flexible energy storage devices with characteristics of light weight, low cost and high electrochemical performance. In this work, we demonstrate a feasible strategy to fabricate novel strand-shaped electrodes from the biomass of Juncus effusus (JE), which can be easily integrated into flexible and rechargeable Zn-MnO 2 batteries with high electrochemical performance. Notably, JE has a very unique three dimensional (3D) triangular-like hollow network microstructure, which greatly favors active material loading, charge transfer and ion diffusion. The obtained aqueous battery presents an excellent specific capacity of 325 mAh g −1 at the current density of 0.3 A g −1 , as well as stunning cycling stability for up to 4000 cycles with 127.53 % retention of the initial capacity. Remarkably, when assembled with a gel electrolyte, the quasi-solid-state battery can work normally under various extreme conditions, including bending, hammering, burning, soaking and puncturing. In addition, due to the high flexibility, the electrodes can be woven in parallel into a textile to form an energy supply unit and successfully power an electronic watch, demonstrating high potential of JE in the fabrication of flexible energy storage devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYST
·
2011
·Vol. 137
·期 4
·953-958
·
IF 3.913
Li Jiao Liang,Xi Juan Zhao,Cheng Zhi Huang
Pyrophosphate ion (PPi) is crucial in varieties of biological processes and industrial applications, and thus it is very important how to recognize it with high selectivity. In this contribution, one terpyridine (tpy)-based fluorescent molecule, 4-(methylphenyl)-2,2′:6′,2′′-terpyridine (mptpy), has been reported to display a highly selective recognition for PPi in the presence of Zn(II). After exposure toward the Zn(II) ion, the characteristic emission of mptpy at 376 nm red-shifted to 406 nm with a strong enhancement upon an excitation at 280 nm, and then blue-shifted to 388 nm with the further addition of PPi. Absorption and fluorescence measurements showed that other phosphates including phosphate (Pi) as well as nucleotide triphosphates could not induce the spectral changes similar to PPi, demonstrating the unique binding effect between mptpy-Zn(II) and PPi. This process could also discriminate PPi from other inorganic anions. Therefore, a tpy-based fluorescence method for the highly selective recognition of PPi could be developed.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2025
·Vol. 15
·期 23
·1777
·
IF 4.3
Haihong Zhao,Lei Li,Jiaxin Li,Feiqi Yan,Wenhao Wang,Mingxia Zhao
In this work, a novel mixed-component bimetallic metal–organic framework (MOF) composite material was synthesized via a solvothermal approach, and its structural and textural properties were systematically characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), N2adsorption/desorption analysis, and transmission electron microscopy (TEM). Furthermore, the single-component adsorption isotherms of CO2and N2were experimentally measured and fitted to the Langmuir–Freundlich model. The CO2/N2selectivity of the composite was evaluated based on the ideal adsorption solution theory (IAST). The results demonstrated that the addition of Zn2+significantly enhanced the specific surface area and improved the CO2adsorption capacity (3.97 mmol/g at 35 °C and 1 bar), with an increase of 31.5% in comparison with the Cu-BTC/MCFs (3.02 mmol/g). Meanwhile, the Zn-Cu-BTC/MCFs had good recyclability and CO2/N2selectivity up to 12.5 determined via IAST (CO2:N2= 85:15).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Research Express
·
2019
·Vol. 6
·期 9
·0950a8
·
IF 1.449
She Jia,Zhengjun Yao,Shasha Zhang,Zelei Zhang,Xuewei Tao,Yingying Liu,Linchao Sun
Graphene (Gr) has attracted much attention due to its excellent performance. There are various studies about Gr composite materials; however, the influence of Gr on anticorrosion mechanism was not explored widely. In this paper, the Gr was prepared by oxidation-reduction method and was modified with 3-aminopropyl triethoxysilane for better dispersion. Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Micrograph (SEM) were utilized to characterize the microstructure of coating and the modification of Gr. X-Ray Diffraction (XRD) was employed to analyse the phase composition of the coating. The anticorrosion performance of coating was investigated by employing polarization curves and electrochemical impedance spectroscopy (EIS). The results showed that the uniformly dispersed Gr nanosheets in Zn-Al-Gr/waterborne epoxy enhanced the protection property of the composite coating. Furthermore, the corrosion resistance properties of the composite coating were optimized by tuning the concentration of the added Gr.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Cong Chen,Minjie Shi,Yue Zhao,Cheng Yang,Liping Zhao,Chao Yan
Although manganese dioxide (MnO 2 ) is of great promise as the cathode material for aqueous Zn-ion batteries (ZIBs), its capacity decreases sharply during cycles due to the irreversible phase transition and Mn dissolution, consequently hindering the large-scale practical application. Herein, for the first time, a novel Al-intercalation engineering of MnO 2 cathode has been proposed for aqueous ZIBs, in which the structural regulation and Zn 2+ storage performance of Al-intercalated MnO 2 (denoted as AMO) cathode are deeply investigated. Electrochemical testing results indicate significant improvement in specific capacity (401.7 mAh g −1 ) and cycling retention (~94.5% over 2000 cycles) of the AMO cathode, which is owing to the effective Al-intercalation that result in the formation of strong Al-O bonds in tunnel-type MnO 2 framework. This reasonable configuration not only optimizes charge/ion state and electronic bandgap, but also ensures reversible phase transition and alleviates the Mn dissolution of AMO cathode, which are further demonstrated by the density functional theory (DFT) calculations and in-situ Raman investigation upon charging-discharging. As a proof of concept, coin-type and flexible aqueous ZIBs based on such AMO cathode are effectively fabricated, and they both achieve excellent electrochemical behaviors, revealing the great potential applications in energy technologies and portable/wearable electronics.
✓ 已验证
DOI
高影响因子
Advanced Powder Materials
·
2022
·
IF 0
Yingzhu Hu,Chunyan Fu,Simin Chai,Qiong He,Yijiang Wang,Mingyang Feng,Yifang Zhang,Anqiang Pan
Aqueous Zn metal batteries have become competitive electrochemical energy storage systems owing to their material abundance, low cost, high capacity, and nontoxicity. Nevertheless, the notorious Zn dendrites and poor anode reversibility caused by the insulating by-products and “dead Zn” are still formidable challenges for their practical application. Herein, an SnS-based layer coated on the Zn anode is reported to tackle these problems. The semiconducting SnS with a higher work function can drive the electrons from the Zn anode, which constructs a polarized interface between the SnS layer and Zn. The semiconducting importance of the coating layer is verified through theoretical simulations, which can migrate the polarization layer from the electrode surface to a well-protected spot beneath the coating layer. This polarization interface is effective in homogenizing the Zn 2+ flux and repelling the anions from electrochemical corrosion. Compared with the bare Zn, the SnS-coated Zn anode exhibits a notable 14.7-fold enhancement in plating/stripping lifetime (over 3000 h), high reversibility (with CE of 99.74%), and superior stability in full cells when paired with vanadium- and manganese-based cathodes.
✓ 已验证
DOI
Frontiers of Materials Science
·
2024
·Vol. 18
·期 3
·1-15
·
IF 2.5
Cui Zeqin,Hu Qifeng,Wang Jianzhong,Zhou Lei,Hao Xiaohu,Wang Wenxian,Li Weiguo,Cheng Weili,Chang Cheng
Zinc-based composites represent promising materials for orthopedic implants owing to their adjustable degradation rates and excellent biocompatibility. In this study, a series of Zn–10Mg– x HA ( x = 0–5 wt.%) composites with the core–shell structure were prepared through spark plasma sintering, and their microstructural, mechanical, and in vitro properties were systematically evaluated. Results showed that the doped hydroxyapatite (HA) is concentrated at the outer edge of the MgZn 2 shell layer. The compression strength of the Zn–10Mg–HA composite gradually decreased with the increase of the HA content, while its corrosion rate decreased initially and then increased. The corrosion resistance of the composite with the addition of 1 wt.% HA was improved compared to that of Zn–10Mg–0HA. However, the further increase of the HA content beyond 1 wt.% resulted in a faster degradation of the composite. Moreover, the Zn–10Mg–1HA composite significantly enhanced the activity of MC3T3-E1 osteoblasts. Based on such findings, it is revealed that the composite containing 1 wt.% HA exhibits superior overall properties and is anticipated to serve as a promising candidate for bone implant materials.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2024
·Vol. 15
·期 1
·1-14
·
IF 14.7
Zhang Minghao,Sun Chenxi,Chen Guanhong,Kang Yuanhong,Lv Zeheng,Yang Jin,Li Siyang,Lin Pengxiang,Tang Rong,Wen Zhipeng,Li Cheng Chao,Zhao Jinbao,Yang Yang
Rechargeable aqueous zinc-metal batteries, considered as the possible post-lithium-ion battery technology for large-scale energy storage, face severe challenges such as dendrite growth and hydrogen evolution side reaction (HER) on Zn negative electrode. Herein, a three-dimensional Cu-In alloy interface is developed through a facile potential co-replacement route to realize uniform Zn nucleation and HER anticatalytic effect simultaneously. Both theoretical calculations and experimental results demonstrate that this bifunctional Cu-In alloy interface inherits the merits of low Zn-nucleation overpotential and high HER overpotential from individual copper and indium constituents, respectively. Moreover, the dynamical self-reconstruction during cycling leads to an HER-anticatalytic and zincophilic gradient hierarchical structure, enabling highly reversible Zn chemistry with dendrite-free Zn (002) deposition and inhibited HER. Moreover, the improved interface stability featured by negligible pH fluctuations in the diffusion layer and suppressed by-product formation is evidenced by in-situ scanning probe technology, Raman spectroscopy, and electrochemical gas chromatography. Consequently, the lifespan of the CuIn@Zn symmetric cell is extended to more than one year with a voltage hysteresis of 6 mV. Importantly, the CuIn@Zn negative electrode is also successfully coupled with high-loading iodine positive electrode to fabricate Ah-level (1.1 Ah) laminated pouch cell, which exhibits a capacity retention of 67.9% after 1700 cycles.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Yang Mi,Anqiang Jiang,Lei Kong,Jun Wang,Heng Guo,Sheng-Nian Luo
I–III–VI ternary quantum dots (QDs) have emerged as favorable alternatives to the toxic II–VI QDs for optoelectronic and biological applications. However, their use as optical gain media for microlasers is still limited by a low fluorescence efficiency. Here, we demonstrate amplified spontaneous emission (ASE) and lasing from colloidal QDs of Zn-processed AgIn5S8 (AIS) for the first time. The passivation treatment on the AIS QDs yields a 3.4-fold enhancement of fluorescence quantum efficiency and a 30% increase in the two-photon absorption cross section. ASE is achieved from the AIS/ZnS core/shell QD films under both one- and two-photon pumping with a threshold fluence of ∼84.5 μJ/cm2 and 3.1 mJ/cm2, respectively. These thresholds are comparable to the best optical gain performance of Cd based-QDs reported in the literature. Moreover, we demonstrate a facile whispering-gallery-mode microlaser of the core/shell QDs with a lasing threshold of ∼233 μJ/cm2. The passivated AIS QDs can be promising optical gain media for photonic applications.
✓ 已验证
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2021
·
IF 5.161
Jinhe Dou,Jing Wang,Yupeng Lu,Chuanzhong Chen,Huijun Yu,Robin Lok-Wang Ma
MAO/CS composite coatings were generated on Mg-1.75Zn-0.56Ca alloy surface for protection and improving biocompatibility of Mg -Zn- Ca alloy in the physiological environment. The microstructure, surface analysis and corrosion resistance of samples were evaluated by scanning electronic microcopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) in SBF solution. In addition, in vitro cell cytotoxicity test was performed by MTT tests. The findings of this work indicated that MAO/CS composite coatings were smooth and defect-free. The MAO/CS coatings retained a low degradation rate and the solution pH value at a moderate level (≤7.5) during immersion test. The corrosion resistance and cell proliferation were greatly enhanced by the composite coating. Furthermore, the different cell cytotoxicity on Mg alloy, MAO and MAO/CS coating was discussed.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2023
·
IF 6.2
Chen Hu,Gaoli Guo,Huihua Li,Jian Wang,Zhengqing Liu,Leilei Zheng,Huang Zhang
Aqueous zinc-ion batteries (ZIBs) have garnered significant attention due to their high energy, intrinsic safety, and environmental friendliness. NASICON-type compounds are promising cathode candidates in aqueous batteries due to their high ionic conductivity , and high operating voltage. However, these materials, e.g., Na 3 V 2 (PO 4 ) 3 , suffer from inevitable structural degradation and dissolution in aqueous electrolytes, thus hampering their practical performance in aqueous batteries. Interfacial chemistry modulation by electrolyte engineering is beneficial for stabilizing Zn metal anode and high-voltage cathodes in ZIBs . Herein, the interfacial chemistries in an engineered non-concentrated aqueous electrolyte by co-solvent strategy are reported, which synergistically enables high reversibility of Zn anode and long cycling stability of Na 3 V 2 (PO 4 ) 3 cathode. Consequently, the Zn||Na 3 V 2 (PO 4 ) 3 full-cell exhibits high Coulombic efficiency (∼99.3% in average) with a prolonged cycling life, which can be ascribed to the synergistic-effect of the solid-electrolyte interphases with unique organic/inorganic hybrid structures on the electrodes. This work discloses the structures of the interphases formed on the electrodes induced by co-solvent strategy in aqueous electrolytes and their working mechanisms in stabilizing the aqueous Zn batteries, which will guide the future design of advanced aqueous electrolytes with unique interfacial chemistries for batteries.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）