COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Qin Cheng,Jinping Gan,Kai Cai,Ming Xia,Yi Wu,Shanshan He,Pan Cheng,Qihao Guo,Ke Liu,Dong Wang
High-quality polyamide (PA) nanofiltration (NF) membrane with excellent selectivity and permeability is of great research significant because of their high practical application value, especially for the precise separation of divalent and monovalent ions, such as Mg 2+ and Li + . Herein, UiO-66-NH 2 nanoparticles (NPs) decorated ethylene vinyl alcohol copolymer (EVOH) nanofiber substrate (M-NFM) was utilized to construct high-quality Janus NF membrane through interfacial polymerization (IP) reaction using polyethyleneimine (PEI) and piperazine (PIP) as aqueous phase monomers and trimesoyl chloride (TMC) as organic phase monomers. The incorporation of UiO-66-NH 2 NPs significantly influenced the hydrophilicity, surface morphology, and pore structure of the substrate, thereby enhancing the properties of the resulting NF. Optimally prepared membranes demonstrated improved separation performance, permeability, stability, and antifouling characteristics compared to the unmodified substrate. Notably, at a Mg 2+ /Li + ratio of 30, the resultant NF membrane achieved a separation factor (S Mg 2+ /Li + ) of 28.4 and a salt permeation flux of 156.8 L·m -2 ·h -1 ·MPa -1 . Additionally, the membrane exhibited over 98% rejection rates for FeCl 3 , CuSO 4 , CaCl 2 , MgSO 4 , MgCl 2 and Na 2 SO 4 with fluxes exceeding 150 L·m -2 ·h -1 ·MPa -1 , highlighting its effectiveness in rejecting multivalent ions. This research presents a simpler and more reliable approach to the fabrication of high-quality Janus PA NF membrane, offering promising potential for industrial-scale applications.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2024
·Vol. 25
·期 18
·9855
·
IF 4.9
Yiting Luo,Rongkui Su
Tetracycline’s accumulation in the environment poses threats to human health and the ecological balance, necessitating efficient and rapid removal methods. Novel porous metal–organic framework (MOF) materials have garnered significant attention in academia due to their distinctive characteristics. This paper focuses on studying the adsorption and removal performance of amino-modified MIL-101(Fe) materials towards tetracycline, along with their adsorption mechanisms. The main research objectives and conclusions are as follows: (1) NH2-MIL-101(Fe) MOF materials were successfully synthesized via the solvothermal method, confirmed through various characterization techniques including XRD, FT-IR, SEM, EDS, XPS, BET, and TGA. (2) NH2-MIL-101(Fe) exhibited a 40% enhancement in tetracycline adsorption performance compared to MIL-101(Fe), primarily through chemical adsorption following pseudo-second-order kinetics. The adsorption process conformed well to Freundlich isotherm models, indicating multilayer and heterogeneous adsorption characteristics. Thermodynamic analysis revealed the adsorption process as a spontaneous endothermic reaction. (3) An increased adsorbent dosage and temperature correspondingly improved NH2-MIL-101(Fe)’s adsorption efficiency, with optimal performance observed under neutral pH conditions. These findings provide new strategies for the effective removal of tetracycline from the environment, thus holding significant implications for environmental protection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CONSTRUCTION AND BUILDING MATERIALS
·
2025
·
IF 8
Shaoming Yang,Yaqi Wang,Jiayi Chen,Yun Feng,Jiahui Li,Yongxin Liu,Liangpeng Zeng,Ji Zhao,Jiali Zhang
Owing to its environmental compatibility and energy conservation properties, photocathodic protection (PCP) has emerged as a promising approach for metal corrosion protection. The key to efficient PCP lies in developing semiconductor composite materials that combine excellent photoelectrochemical performance with a simple preparation process. Herein, a carbon-doped TiO 2 /Bi 2 S 3 composite (Bi 2 S 3 /C-TiO 2 ) was fabricated via a single-step, low-temperature hydrolysis strategy using NH 2 -MIL-125(Ti) as the precursor, concurrently achieving carbon doping and incorporating a narrow-bandgap semiconductor. Characterization by UV-Vis diffuse reflectance spectroscopy and photoelectrochemical testing under illumination revealed that the composite exhibits significantly enhanced visible-light absorption while effectively suppressing photogenerated charge carrier recombination. Under optimized conditions, the Bi 2 S 3 /C-TiO 2 photoanode shifted the potential of coupled 304 stainless steel (304SS) to −464 mV (vs. Ag/AgCl) under visible-light irradiation—substantially below its corrosion potential—demonstrating effective photogenerated cathodic protection for 304SS.
✓ 已验证
产品关联
DOI
高影响因子
VACUUM
·
2024
·
IF 3.8
Xun Zhou,Xin Yi,Zhixian Liang,Jie Zhang,Guixiang Li,Yuanliang Tang,Kun Zhou,Shaohui Zhang
In this work, the photothermal effect of aminomodified MWCNTs/TiO 2 /SiO 2 /PDMS nanocomposites was utilized as a photothermal substrate to replace the metal heating block of traditional qPCR combining of the advantages of high photothermal effect of composite materials and low sample volume of static microfluidic PCR. Meanwhile, Multiple PCR rapid thermal cycles under 808 nm laser irradiation was accomplished through a non-contact energy conversion method and the use of chamber-immobilized PCR chips as specific reaction vessels. Notably, the chip chamber architecture requires merely about 8 μL of reagents compared to traditional PCR tubes. While reducing the amount of PCR reagents used, the higher specific surface area results in a larger contact surface (SSA) between the heat source and the solution. Thereafter, the CCD image sensor is then used as a fluorescence detector to monitor the amplification of the target DNA during the PCR reaction, thus enabling simultaneous fluorescence detection. In addition, the threshold cycle (Ct) value of qPCR and standard PCR curves for SARS-CoV-2 virus have been analysed in depth. Importantly, this study has important implications for the development of low-cost materials, miniaturized and portable Point-of-Care Testing (POCT) chips/systems.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Huijing Ma,Bing Yu,Qingping Wang,Gary Owens,Zuliang Chen
While Fe-based metal-organic frameworks (MOFs) can be used to remove antibiotics by adsorption, knowledge of how antibiotics are degraded by MOFs is still limited. In this study, one Fe-based MOF, NH 2 -MIL-88B was used to remove pefloxacin from aqueous solution via a combination of adsorption and Fenton-like oxidation. NH 2 -MIL-88B exhibited a high adsorption capacity for pefloxacin (41.37 mg·g −1 ), with >99% removal efficiency within 120 min based on Fenton-like oxidation. To better understand the mechanisms involved in integrated adsorption and Fenton-like oxidation, various advanced characterization techniques were used to monitor the changes in morphology and composition of NH 2- MIL-88B before and after removal of pefloxacin. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) all supported adsorption and Fenton oxidation of pefloxacin. In addition, the pefloxacin degradation products identified by LC-UV and LC-MS provided information on the potential adsorption-Fenton oxidation mechanism. These results suggested that NH 2 -MIL-88B has remarkably potential to be used in an integrated adsorption and Fenton-like process for the removal of antibiotics from aqueous solution.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2025
·
IF 4.2
Yuxi Liu,Wenjing Zhang,Weimeng Chi,Yuxuan Liu,Ying Chen,Yuning Liang
As a potential Fenton catalyst, Fe-based organic frameworks (Fe-MOFs) severely limit their application in practical heavy pollution due to their slow cycling rate. In this work, a novel photocatalyst (NH 2 -MIL101(Fe, Cu)/WO 3 ) was synthesized using a two-step hydrothermal method. Research on photocatalytic activity revealed that NH 2 -MIL101(Fe, Cu)/WO 3 , when combined with H 2 O 2 , exhibits higher degradation efficiency compared than pure NH 2 -MIL101(Fe, Cu) or WO 3 alone, achieving up to 90 % degradation of levofloxacin (LEV) under visible light irradiation. In addition, the effects of hydrogen peroxide dosage, pH and other factors on degradation performance were studied, and the results demonstrated good stability even after multiple cycles. This excellent photocatalytic performance is attributed to the formation of heterogeneous structures as well as the doping of copper ions. This not only inhibits the electron-hole recombination, but also improves the redox capacity of the catalyst accelerating the regeneration of Fe 3+ . This work offers a way to enhance the photo-Fenton activity of Fe-MOF-based catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2025
·
IF 5.1
Jin Wang,Tianlong Zhou,Jie Zou,Jianhang Hai,Yunqing Lu
Triboelectric nanogenerators (TENGs) have emerged as a promising technology to harvest energy from the environment due to their self-powered characteristics, simple structure, low cost and high flexibility. To improve their performance, this work proposes a hierarchical optimization strategy, which integrates the employment of polyimide (PI) matrix, the doping of metal-organic framework and the surface patterning of TENG triboelectric layers to achieve high output performance and durability. In the work, the PI/UIO-66-NH₂ mixed matrix membrane (MMM) is first synthesized and characterized, where the influence of UIO-66-NH₂ loading amount on the triboelectric properties of MMM is analyzed. The measurement results show that this MMM exhibits excellent dielectric properties and thermal stability. Subsequently, the TENG device operated in the vertical contact-separation mode is fabricated, where MMM is used as the negative triboelectric layer and pure PI membrane as the positive layer. Moreover, the surface patterning method based on soft imprint lithography is applied to both triboelectric layers to augment their effective contact areas. Then, the output performance of TENG is characterized. It is found that, for the weight ratio of UIO-66-NH₂ of 5 wt%, the patterned UIO-66-NH₂ MMM-based TENG (P-TENG-5) achieves a maximum output power density of 78.27 ± 3.42 μW/cm², which is 5.76 times higher than that of unpatterned TENG-5 and 361.35 times greater than that of pure PI-based TENG-0. Remarkably, P-TENG-5 maintained stable performance over 20,000 cycles at 2 Hz without the considerable performance degradation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 3
·1-10
·
IF 5.3
Miao Pandeng,Chen Jiaquan,Xu Guangfu,Yu Tao,Du Yingxiang
Chiral phenyl aromatic compounds (CPACs) are widely used in drug development, food/cosmetic production, and other organic synthesis processes, and their different enantiomers have distinct physiological activities and application differences. A double-layer metal–organic framework composite (MOF-on-MOF) was obtained by in situ synthesis of chiral metal–organic framework (CMOM-3S) on the surface of an iron-based metal–organic framework (NH 2 -MIL-101(Fe)). According to our investigation, MOF-on-MOF composite was for the first time applied to the stationary phase of capillary electrochromatography (CEC), and enantioseparations of eight CPACs were accomplished. Compared with single CMOM-3S, the enantioseparation performance of the coated capillary columns based on NH 2 -MIL-101(Fe)@CMOM-3S was improved by 34.07 ~ 720.0%. The R-/S-mandelic acid in actual sample (apricot leaves) was detected by the newly CEC system to be 0.0118 mg mL −1 and 0.0523 mg mL −1 , respectively. The spike recoveries were 96.60 ~ 104.7%, indicating its good stability and accuracy. In addition, the selective adsorption capacity of MOF-on-MOF composites was verified by adsorption experiments. Graphical Abstract
研究领域:
分析化学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
Applied Materials Today
·
2025
·
IF 6.9
Longfang Ren,Fangfang Dong,Xiaodong Gao,Sijie Yu,Taotao Qiang
The flexible ammonia sensor can detect the ammonia content in the air or the exhaled gas of humans, but the commonly used sensors have poor breathability and washability, so they are not suitable for direct contact with human skin. In this work, based on the excellent flexibility and permeability of nonwovens, UiO-66-NH 2 /MoS 2 @nonwoven (UMN) and UiO-66-NH 2 /MoS 2 /Ag@nonwoven (UMAN) gas sensors were prepared by loading self-prepared UiO-66-NH 2 /MoS 2 (UM) and UiO-66-NH 2 /MoS 2 /Ag (UMA) onto microfiber nonwovens. The results show that UMN and UMAN gas sensors exhibit high selectivity toward ammonia gas. The response values of UMN and UMAN demonstrate a consistent linear trend within the ammonia concentration range of 1–50 ppm and reach 43 % and 47 % at 1 ppm respectively. The response variations of the sensors before and after bending are below 4 %, demonstrating excellent bending stability. After washing for 24 h, the gas sensing performance shows nearly no change, indicating that they both have good reusability and washability. However, the sensors exhibit limited thermal and humidity stability. Given the challenges such as poor breathability and insufficient biocompatibility faced by traditional flexible gas sensors, UMN and UMAN sensors have emerged as highly promising alternatives with distinct advantages.
研究领域:
生物医学工程
·
传感技术
·
纳米材料
·
呼吸健康监测
·
柔性电子学
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2025
·
IF 7.5
Li-Li Xue,Qing He,Si-Wen Li,Jian-She Zhao
In recent years, the escalating global demand for clean energy has underscored the urgency of developing high-efficiency fuel desulfurization technologies. This study reports the facile synthesis of a molded fiber-supported composite catalyst, POM@UiO-66-NH 2 @CF (PU N C), via impregnation, integrating polyoxometalates (POMs) with amino-functionalized metal–organic frameworks (MOFs) on cellulose fibers (CF). The catalyst delivers exceptional performance in ultra-deep oxidative desulfurization (ODS), enabled by systematic optimization of reaction parameters using response surface methodology (RSM) with a Box-Behnken design (BBD). Through RSM optimization and adjustment, the actual desulfurization conditions were determined as 66 °C, O/S = 7, 7 mL DMF, and 2 catalyst pieces and PU N C achieved a validated 99.26 % desulfurization efficiency for dibenzothiophene (DBT) in model fuels, demonstrating close agreement with theoretical predictions. Kinetic analysis revealed the ODS reaction conformed to a pseudo-first-order kinetic model with a low activation energy of 2.45 kJ/mol, while EPR spectroscopy confirmed ·O 2 − radicals as the dominant reactive species, highlighting a POM-mediated radical oxidation pathway. PU N C exhibited robust reusability, maintaining >95 % efficiency over 5 consecutive cycles. The catalyst’s performance is attributed to the synergistic architecture of MOF-fiber supports, where 3-chloropropyltrimethoxysilane (CPTMS) enables covalent bonding of UiO-66-NH 2 to CF, creating amine-rich sites for electrostatic POM immobilization and enhanced stability. This work showcases the synergy between structural design and RSM-driven optimization, offering innovative insights for developing high-efficiency, environmentally benign molded catalysts for ultra-deep ODS and related oxidative processes.
✓ 已验证
产品关联
DOI
高影响因子
Heliyon
·
2022
·
IF 3.776
Xuezhong Li,Yue Wang,Qi Guo
The porous iron-based metal organic frameworks (NH 2 -MIL-101(Fe)), which consists of 2-amino benzene dicarboxylic acid (H 2 BDC-NH 2 ) and ferrous ions were synthesized through one-step hydrothermal method. The surface area and pore volume of as-synthesized NH 2 -MIL-101(Fe) were 66.48 m 2 /g and 0.09 cm 3 /g, respectively. The excellent photocatalytic performance endows NH 2 -MIL-101(Fe) to generate hydroxyl radical ( OH), which then acting as efficiently active sites for azo dye degradation in wastewater. Meanwhile, the outstanding stability ability of NH 2 -MIL-101(Fe) indicates the potential candidate for wastewater treatment.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF FLUORESCENCE
·
2026
·
IF 3.4
Hou Huijing,Luo Mingming,Li Fang,Tan Yijun,Liu Ruowei,Xu Longping,Feng Yanwen,Guo Xiangli,Wu Zijian
Kanamycin (KANA) is a veterinary drug residue that is highly scrutinized in food safety testing. In this study, a metal-organic framework-based aptamer-nanoenzyme (NH 2 -MIL-88B(Fe)/CDs-Apt) was introduced for the dual-mode detection of KANA. NH 2 -MIL-88B(Fe) catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H₂O₂ to form blue ox-TMB, thereby enabling colorimetric detection. As a fluorescence quencher, NH 2 -MIL-88B(Fe) quenches the fluorescence of CDs via photogenerated electron transfer (PET) or fluorescence resonance energy transfer (FRET) mechanisms. The detection limits were 0.716 fM (fluorescent) and 0.709 fM (colorimetric), respectively. The proposed aptasensor was successfully applied to the detection of KANA in eggs, honey, and lake water. This aptasensor demonstrates high sensitivity and accuracy, as well as broad application potential.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）