Materials Today Bio
·
2026
·
IF 11
Li Yang,Qianlei Ye,Xinran Peng,Jiayin Yu,Xueyi Xiao,Lei Wang,Yi Yan Yang,Peiyan Yuan,Guo-Bao Tian,Xin Ding
Rising antibiotic resistance and adverse effects on commensal gut microbiota severely compromise conventional antibiotic therapies for Helicobacter pylori infection. Sonodynamic therapy (SDT), which employs low-intensity ultrasound to activate sonosensitizers for localized generation of cytotoxic reactive oxygen species (ROS), presents a promising non-antibiotic alternative with minimal resistance development risk. However, the efficacy of SDT is inherently constrained by the short diffusion radius and lifetime of ROS. Herein, we developed a homologous-targeting biomimetic sonosensitizer platform to overcome this limitation: hybrid membrane nanovesicles (TNVs-DMVs) engineered from turmeric plant-derived exosome-like nanovesicles (TNVs) and H. pylori -derived double membrane vesicles (DMVs). TNVs contain sonosensitizer curcumin and improve its solubility, yet SDT efficacy against H. pylori is limited. The DMVs endow TNVs-DMVs with intrinsic homologous targeting capability towards H. pylori , significantly enhancing the intracellular delivery of curcumin and subsequent ROS generation within bacterial cells. As a result, TNVs-DMVs achieved potent eradication of H. pylori in both acidic and neutral conditions without inducing detectable resistance. Moreover, TNVs-DMVs exhibited superior mucus penetration compared to TNVs alone, enabling effective elimination of H. pylori and its biofilms residing within the protective gastric mucus layer. In an H. pylori -infected mouse model, TNVs-DMVs mediated SDT demonstrated efficacy surpassing free TNVs and comparable to standard triple antibiotic therapy. Importantly, unlike triple therapy which depletes commensal flora, TNVs-DMVs treatment not only preserves intestinal microbiota homeostasis but also significantly increases populations of beneficial bacteria. This rationally designed TNVs-DMVs platform represents a transformative therapeutic modality, offering resistance-free eradication of H. pylori while maintaining microbiome health, distinct from conventional antibiotics.
✓ 已验证
DOI
PubMed
高影响因子
Thermal Science and Engineering Progress
·
2026
·
IF 5.6
Xiaoru Huang,Shengmao Zhang,Chao Ju,Gaiqing Zhao,Qin Zhao,Xiaobo Wang
h-BN is modified via synergistic KH550 and Span 80. BNKS nanosheets sustain stable dispersion in ester oil 1190 for 7 days. • BNKS nanofluids show less viscosity rise. BNKS-5 has 8.27% higher thermal conductivity (0.1693 W·m −1 ·K −1 , 20 ℃) vs ester oil. • BNKS-5 nanofluid lowers battery module maximum temperature difference to 4.80 °C at 4 L/min. Immersion cooling technology enables efficient heat dissipation through direct heat exchange between coolants and components. Ester oils are considered potential cooling media owing to their biodegradability and excellent thermal stability; however, their low thermal conductivity limits further improvement in cooling performance. Thus, this study proposed and implemented a synergistic mechanism combining chemical bonding and physical adsorption through the surface modification of h-BN with KH550 and Span 80. Nanofluids were prepared using ester oil 1190 as the base fluid, and their dispersion stability, rheological properties, and thermal conductivity were evaluated. Numerical simulations were further conducted to assess the cooling performance of the BNKS nanofluid in an immersion cooling system. The results demonstrated that the modified BNKS nanosheets exhibited improved short-term dispersion stability in ester oil 1190 compared with h-BN, maintaining stable dispersion after 7 days of static sedimentation. Moreover, surface modification reduced the viscosity increase of high-concentration nanofluids. At 20 °C, the BNKS-5 nanofluid achieved a thermal conductivity of 0.1693 W·m −1 ·K −1 , corresponding to an 8.27% enhancement compared with ester oil 1190. At a flow rate of 4 L/min, the BNKS-5 nanofluid decreased the maximum temperature difference of the battery module to 4.80 °C and maintained an average temperature of 26.78 °C, indicating enhanced temperature uniformity and cooling performance. This study proposed a synergistic surface modification strategy that integrated KH550-induced chemical bonding with the physical adsorption of Span 80 to improve the dispersion stability and thermal transport properties of ester oil-based h-BN nanofluids, highlighting their potential for immersion cooling applications.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Hanyu Shi,Hongliang Fu,Shaocong Zhan,Yue Lian,Yong Dai,Yongfeng Hu,Yang Zang,Zhifeng Wang,Jing Zhao,Huaihao Zhang
Oily wastewater discharge severely endangers ecology and human health, driving demand for oil-water separation materials with high efficiency and environmental friendliness. In this study, the H-ZSM-5 molecular sieves were incorporated into PVA matrix and loaded onto stainless steel mesh (SSM) to construct H-ZSM-5/PVA@SSM composite hydrogel separation material. H-ZSM-5 builds continuous water transport channels for large water flux, increases surface roughness on composite hydrogels to form stable hydration layers and improve oil resistance, while hydrogen bonding reinforces adhesion with PVA matrix. Meanwhile, the SSM as rigid supporting framework offers steady mechanical support for hydrogel coating, and effectively improve material mechanical strength and reusability. The optimal H-ZSM-5/PVA-0.5@SSM sample achieves markedly increased water flux rising from 113.04 L m −2 h −1 (PVA@SSM) to 735.82 L m −2 h −1 , while maintaining separation efficiency above 96% after 30 cycles. Besides, the material gains oil-in-water emulsion separation efficiency up to 99.80% with water flux of 1.086 × 10 5 L m −2 h −1 bar −1 . Also, the H-ZSM-5/PVA-0.5 composite hydrogel gains tensile strength enhancement from 22.16 MPa to 26.97 MPa compared to pristine PVA hydrogel. By integrating H-ZSM-5 porous transport merit, PVA hydrophilicity and SSM rigid support, the H-ZSM-5/PVA-0.5@SSM achieves efficient purification of oily wastewater and emulsions.
✓ 已验证
产品关联
DOI
高影响因子
CEMENT AND CONCRETE RESEARCH
·
2026
·
IF 14
Zedong Zhou,Hangxi Liu,Juanlong Li,Yiru Yan,George Dan Miron,Barbara Lothenbach,Biwan Xu,Ming Fang,Xiaoli Tan,Bin Ma
Calcium silicate hydrate (C-S-H), the principal binding phase in Portland cement, plays a critical role in the immobilization of heavy metals, yet a quantitative and mechanistic understanding of Cu 2+ uptake by C-S-H remains incomplete. This study investigates the immobilization behavior of Cu 2+ by C-S-H with systematically controlled Ca/Si ratios (0.6–1.6) and develops a thermodynamically consistent sublattice solid-solution model. The C-S-Hs were synthesized under sorption equilibrium conditions and characterized to determine their structural evolution with Ca/Si ratio. Cu 2+ sorption was subsequently examined on pre-synthesized C-S-Hs, combined with spectroscopic analyses to elucidate Cu coordination environments. The results show that Cu 2+ is immobilized predominantly through structural incorporation at low Cu 2+ loadings rather than hydroxide precipitation. With increasing Cu 2+ concentration, Cu 2+ progressively intercalates into the interlayers of C-S-H, partially replacing interlayer Ca 2+ and forming Si-O-Cu linkages associated with Q 2 silicate sites. The Ca/Si ratio strongly controls both uptake capacity and binding mechanism. High Ca/Si ratios promote silicate-chain polymerization through conversion of Q 1 to Q 2 units, whereas extremely low Ca/Si ratios induce redistribution between Q 2 and Q b 2 species. At intermediate Ca/Si ratios, Cu 2+ is mainly stabilized as hydroxyl-associated species. Once the sorption capacity is exceeded, excess Cu 2+ transforms into CuO under alkaline conditions. Based on these observations, a CASH+Cu thermodynamic model incorporating five Cu-bearing endmembers was developed and calibrated using both aqueous and solid-phase data. The model quantitatively reproduces Cu uptake, solution chemistry, and phase assemblages, providing a predictive framework for Cu 2+ retention in cementitious systems.
✓ 已验证
DOI
高影响因子
ENERGY
·
2026
·
IF 10.1
Feiyang Xu,Jing Li,Zhen Zhu,Chuting Lai,Wenluo Li,Niansi Li,Bendong Yu
In hot and humid climates, establishing continuous and energy-efficient humidity control strategies is crucial for improving indoor environmental quality. However, most existing adsorption dehumidification systems are unable to operate continuously due to the necessary regeneration process of adsorbent materials. Therefore, this study proposes a solar-driven dual-channel ventilated Trombe wall system based on MOFs, which achieves 24-h continuous indoor dehumidification via alternating adsorption-desorption operations. MOFs/CF is employed as the adsorption bed. Two identical beds operate in an alternating manner, utilizing cold and hot water circulation to provide the driving force for the adsorption and regeneration processes, respectively. Cold water is supplied at 25 °C and hot water is provided by solar energy. The comprehensive performance of the system is evaluated through modular experimental testing and numerical simulations. Experimental results demonstrate that the MOFs/CF adsorption bed achieves a maximum adsorption capacity of 0.91 g/g. Elevating the desorption temperature enhances the regeneration performance; at a desorption temperature of 80 °C, the peak relative humidity difference between the inlet and outlet air reaches 12.8%. Furthermore, simulation results reveal that with a single adsorption bed featuring an effective area of 0.4 m 2 and an MOF loading of 0.96 kg, the system achieves its maximum dehumidification capacity under the 80 °C condition. In this scenario, the system completes approximately five cycles within 24 h and yields a total daily moisture removal of 4.54 kg. In addition, the system demonstrates superior overall performance under the 70 °C condition, where the thermal driving efficiency peaks at 87.22%.
✓ 已验证
DOI
高影响因子
RARE METALS
·
2025
·
IF 11
Chen Taoran,Qin Tian,Sun Hongli,Su Chenliang
Photocatalytic oxidation of toluene to valuable benzaldehyde offers a promising pathway for sustainable production of fine chemicals and pharmaceuticals. In this process, photogenerated holes play a crucial role in C(sp 3 )-H bond dissociation. However, the photocatalytic performance of current photocatalysts is often hindered by the low separation and transfer efficiency of photogenerated charges. In this work, we presented a perovskite-based heterostructure via in situ growth of defective WO 3- x nanosheets on Cs 2 AgBiBr 6 nanoparticles for photocatalytic toluene transformation. In situ Fourier transform infrared spectroscopy tests proved the introduction of oxygen-deficient WO 3- x component enhanced the chemisorption of molecular oxygen. The in situ electron paramagnetic resonance and 4-chloro-7-nitro-1,2,3-benzoxadiazole fluorescence measurements further confirmed the presence of oxygen vacancies, and the formation of heterostructure synergistically accelerated the formation of the superoxide radicals and the transfer of photogenerated charge carriers. Under visible light irradiation, Cs 2 AgBiBr 6 /WO 3- x photocatalyst could effectively oxidize toluene toward benzaldehyde with a conversion rate of 9020 μmol g −1 h −1 , which was a 3.5-fold increase over that of the unmodified Cs 2 AgBiBr 6 . Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Yuxin Li,Juanping Zhou,Hu Wen,Haitao Yin,Shunyu Han,Nanzhe Jiang
Clay is a rich aluminosilicate resource with unique advantages as a raw material for zeolites production. However, synthesizing nanosized single-crystalline zeolites through a simple approach using clay remains a significant challenge. In this paper, acid-washed montmorillonite (MSR) was used to prepare nano-H-ZSM-5 single crystals with high crystallinity, uniform grain size and permeable straight pores under the induction of a small amount of organic template tetrapropylammonium hydroxide (TPAOH). Through temperature-staged treatment, the nucleation and growth process of zeolite were decoupled, ultimately achieving precise control over the size of the nano-single crystals. Mechanistic study showed that the low-temperature aging process produces smaller structural units which probably derived from the geopolymer topology of the clay, providing more active sites for zeolite nucleation, leading to the rapid crystallization during the high-temperature process. The porous structure promotes material diffusion, inhibits aromatic cycling and reduces carbon formation in the pores. The large specific surface area and nanoscale multilayer pore structure delay carbon accumulation and increase carbon holding capacity. These properties make nano-ZSM-5 single crystals an excellent choice for high olefin selectivity and long catalytic life in the methanol-to-olefin reaction. This synthetic route provides a general strategy for preparing nanosized zeolite single crystals from clay.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Fan Zhang,Mao chen,Hailong Wang,Gang Shao,Yongshun Qi,Chengliang Ma,Bingbing Fan,Xiaoxuan Pian,Rui Zhang,Hongxia Li,Yongqiang Chen
The h-BN/ZrO 2 composites with different 3Y–ZrO 2 content were prepared by spark plasma sintering at 1800 °C. The sintering behavior , bulk density, apparent porosity , thermal conductivity , thermal expansion coefficient , bending strength , thermal shock resistance , microstructure and phase were analyzed. The optimum specimens were used to test the resistance to corrosion of molten steel for 10, 20, 40, 80 min respectively. The results indicated that ZrO 2 could facilitate the sintering process of h-BN matrix under the action of spark plasma. Especially, for the composites with 30 wt% 3Y–ZrO 2 , the porosity could decrease to 1.1% and the flexural strength could exceed 150 MPa. The microstructure showed the h-BN grains and 3Y–ZrO 2 grains are closely combined. The XRD patterns indicated that the t-ZrO 2 diffraction peak gradually enhanced with the increase of density. With the increase of erosion time, the erosion rate increased significantly. After the surface of the specimen is eroded, the erosion resistance of the matrix would decrease significantly. This h-BN/ZrO 2 could be as side-dam used in the thin strip continuous casting process .
研究领域:
材料科学
·
陶瓷工程
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Zhihui Wei,Jie Li,Lixia Yang,Siyu Liu,Haicheng Li,Mingxia Lu,Tiantian Ying,Yan Luo,Kexin Li,Zhenglin Chen,Xiuping Zhang,Shenglian Luo
Degradation of halogenated organic compounds using the electro-reduction process is a promising approach for advanced water treatment. In this work, antiferromagnetic Co 3 O 4 nanoparticles were first loaded on a uniform anodic porous TiO 2 surface through a hydrothermal strategy, then subjected to an electrochemical reduction, which transform from nanoparticle-shape to interconnected nanoflakes. Compared with the pristine Co 3 O 4 nanoparticles, the morphologically transformed Co 3 O 4 cathode features a porous interface with amorphous Co(OH) 2 and CoOOH shell, which favors the generation of abundant •OH radicals along with lower overpotential for reducing H + to H*. On account of the plentiful radicals and self-supporting nature, the resulting Co 3 O 4 cathode retains high activity for efficiently degrading Thiamphenicol in water, even after 10 h run, demonstrating remarkable durability. Moreover, it is adaptable in a wide pH window of 3 to 10, and effectual when the initial Thiamphenicol concentration increases from 0.5 to 50 mg/L regardless of the water background (tap water, lake water, or river water). This study delivers a profound cognition about the dynamic behaviors of Co 3 O 4 -based electrocatalysts applied in eliminating halogenated antibiotics.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Mengjiao Xing,Yunlei Chen,Jian Cao,Yuanlong Han,Zhichao Tao,Fei Wang,Kun Hao,Ling Zhang,Wentao Zheng,Hongwei Xiang,Yong Yang,Yongwang Li,Xiaodong Wen
Understanding the catalytic structure–activity relationship over active sites is of fundamental importance in heterogeneous catalysis field. Herein, a series of H-ZSM-5 zeolites with Al pairs contents in the range of 31% to 82% are used to explore the structure sensitivity of olefin aromatization reaction. Compared with high reaction temperatures (385 ℃ and above), prominently different initial aromatic yields are observed over the samples at 150 ℃. In addition, the 1-octene temperature-programmed surface reaction (TPSR) and theoretical calculation results give a thorough understanding on active site dependent activation temperature (100 vs 150 ℃ over Al pairs and single Al). However, the catalytic cycle of olefin aromatization is not sustainable at low reaction temperature, which is due to the formation and blocking of big molecules in the micropores (e.g., trimethylbenzene etc.). In conclusion, the desorption of big molecules is the rate-determining step for olefin aromatization reaction over H-ZSM-5, which masks the structure sensitivity over Al pairs and single Al.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Heng Ye,Shengnan Wang,Yong Wang,Peiting Guo,Liying Wang,Chengke Zhao,Shuqing Chen,Yimai Chen,Hongqi Sun,Shaobin Wang,Xing Ma
Wastewater remediation using micro/nanomotors is a hot topic, and MnO 2 based materials have become fascinating alternatives to rare noble metal-based micro/nanomotors. Herein, we demonstrate facile and large-scale synthesis of Fe-MnO 2 core-shell micromotors for antibiotic pollutant removal. Heat-treatment results in a phase transformation of MnO 2 with formation of iron oxides and partially exfoliates the MnO 2 nanoplate shell structure to promote mobility. The iron-manganese oxide micromotors exhibit an efficient removal of tetracycline antibiotics via a combination of catalytic degradation and adsorptive bubble separation. For the first time, atomic H* was found to participate in the micromotor-assisted degradation process, resulting in optimal Fenton reaction in neutral conditions with a good decontamination performance. Owing to the merits of abundance, magnetic recovery, facile fabrication, good motion, and environmental friendliness, as well as decontamination performance in a wide pH range, these core-shell micromotors demonstrate a promising candidate in practical wastewater treatment .
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 6
·1788-1798
·
IF 6.177
Jing Zhao,Yanzhuo Zhang,Hucheng Zhang,Haiyan Wang,Jianji Wang
Hydrogen spillover is an important theme for hydrogen storage and H-involving catalytic reactions. This work shows that catalytic reactivity and selectivity can be revealed by differentiating the energetic characteristics of spilled H species. With the assistance of Ti, F and C in MXenes, Pd1.8Ni@Ti3C2Tx presents a high capacity for spillover hydrogen storage at ambient temperatures, and the rich oxygenated groups act as the main carriers of hydrogen spillover around metal nanoparticles. Thermodynamic analysis reveals that the catalytic performances are energetically dominated by the adsorption enthalpies of the active spilled H species rather than the amount of spillover hydrogen, and can be tuned by alloying and surface modification. The ideas are verified from the excellent catalysis, chemoselectivity and stereoselectivity of Pd1.8Ni@Ti3C2Tx in semihydrogenations. The strategy of maximizing catalytic performances is applicable to other Pd-based bimetals@Ti3C2Tx, such as Pd2.6Co@Ti3C2Tx and Pd1.5Fe@Ti3C2Tx, and provides new energetics perspectives to understand the catalytic mechanism in spillover-involving chemical procedures.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）