Journal of Materials Chemistry A
·
2021
·Vol. 9
·期 47
·26999-27009
·
IF 12.732
Kexia Jin,Jianxiong Xing,Xinge Liu,Zehui Jiang,Shumin Yang,Xuan Yang,Jianfeng Ma
To achieve high mechanical strength electromagnetic interference (EMI) shielding materials for practical application, cellulose nanocrystals (CNC), as a reinforcing and dispersing agent, are intercalated into reduced graphene oxide (RGO) layers, forming an ultrathin, robust, flexible, and hydrophobic CNC/RGO film with a highly ordered nacre-like layered structure via a self-assembly process. The layered structure significantly shortens the reduction time and improves the mechanical strength and shielding effectiveness (SE) of the resultant CNC/RGO composite film. The controlled preparation of CNC with different aspect ratios is realized by using separated bamboo fiber and parenchyma. The CNC of the fiber with a higher aspect ratio and lower diameter results in a lower porosity, denser structure, and more uniform distribution in the composites, and therefore a higher electrical conductivity and SE. The highest SE (39.1 dB) and specific SE (11 367 dB cm2 g−1) with a high tensile strength (179 MPa) and water contact angle (106°) of the CNC/RGO film are obtained at 10 wt% CNC loading with a film thickness of 12 μm. The maximum tensile strength of the composite film reaches 227 MPa with 30–50% CNC. The ultrathin high-performance CNC/RGO film shows significant potential as an EMI shielding material in the aerospace and flexible electronics fields.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2021
·
IF 9.078
Hewei Zhao,Xiaolong Zeng,Tian Zheng,Shaojia Liu,Jie Yang,Rui Hao,Fengshi Li,Lin Guo
High capacity, ultra-fast charge/discharge rate, and long cycling life are external targets for Lithium-ion batteries (LIBs) to satisfy modern energy storage, but it is still challenging to realize them simultaneously. Here, we report a three-dimensional (3D) porous rGO@SnO 2 nanosheets aerogel (rGO@SnO 2 NSA) based on in-situ growing two-dimensional (2D) SnO 2 nanosheets on graphene oxide (GO@SnO 2 NS), subsequent controllable assembly and reduction. The 2D structure of SnO 2 can shorten the electron-transfer path, and the porous architecture of the 3D aerogel endows the aerogels with external ion-transfer channels and exceptional capacitive contribution. As a result, the LIBs using our 3D aerogels as anodes can endure ultrafast charge/discharge (10 A g −1 ) rate and exhibit ultra-long cycling life with a high energy density (512.1 mAh g −1 after 10,000 cycles). For application exploration, the LiFePO 4 /rGO@SnO 2 NSA cell also possesses excellent energy storage performance (364.5 mAh g −1 after 100 cycles). Our electrode design strategy of combining 2D active materials and 3D porous architecture provides a new path to develop next-generation rechargeable energy storage devices.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Niandu Wu,Wenhua Zhao,Boye Zhou,Yizhang Wu,Wentao Hou,Wei Xu,Jun Du,Wei Zhong
Ti 3 C 2 T x (MXene) has intriguing application potential for supercapacitors. However, it usually suffers from self-accumulate and restack, resulting in the decrease of electrochemical active sites and low capacitance. Here, we demonstrated a 3D nitrogen-doped Ti 3 C 2 T x /rGO (NTG) foam which was synthesized through the multistep of gelation assisted with urea, freeze-drying, and thermal treatment processes. The decomposition of urea can not only change the morphology, bringing out more open marco- and microporous structures, but also improve the conductivity due to the nitrogen doping in the matrix. The 3D porous architecture can expose more electrochemical active sites, and thus accelerate the transport/diffusion of electrolyte ions. Consequently, the NTG foam possesses a high specific capacitance of 463 F g −1 , good rate performance, and outstanding cycling stability (90.8% retention after 10 000 cycles) in H 2 SO 4 electrolyte, showing enhanced performance of supercapacitors in comparison with pure Ti 3 C 2 T x and Ti 3 C 2 T x /rGO electrode.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2023
·
IF 8.3
Longjie Liu,Zeyang Lu,Wanling Cai,Gary Owens,Zuliang Chen
Reduced graphene oxide/iron nanoparticles (rGO/FeNPs) synthesized by the chemical method have been used in Fenton oxidation of organic contaminants , yet little is known about biosynthesized rGO/FeNPs using green tea extract (GT) as how to activate persulfate in sulfate radical-based advanced oxidation processes . In this study, rGO/FeNPs were used to activate peroxydisulfate (PDS) for 17β-estradiol (βE 2 ) and estriol (E 3 ) removal. The rGO/FeNPs-PDS system removed 83.6% of βE 2 and 62.5% of E 3 within 240 min, which was confirmed by a combination of adsorption and degradation via both radical and non-radical pathways. Four main reactive species in βE 2 and E 3 degradation were observed, i.e., hydroxyl radical (·OH), sulfate radical (SO 4 ·− ), singlet oxygen ( 1 O 2 ) and electron transfer , with the respective contributions of ·OH (32.9 and 34.7%), SO 4 ·− (16.1 and 19.7%), 1 O 2 (12.2 and 14.1%) and electron transfer (8.0 and 7.2%). Analysis of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Electron Paramagnetic Resonance (EPR) and electrochemical measurements all indicated that beside the well-known role of Fe, C O from rGO through the generation of ·OH, SO 4 ·− , 1 O 2 and electron transfer, as well as GT through electron transfer also participated in the activation of PDS. Finally, the degradation pathways of βE 2 /E 3 were proposed. Overall, this study provides a new insight into the biosynthesis of rGO/FeNPs to activate PDS for the oxidation of mixed emerging contaminants .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF DAIRY SCIENCE
·
2023
·
IF 3.5
Honglin Li,Congcong Du,Ting Guo,Hongyuan Zhou,Ying Zhou,Xinrui Huang,Yu Hao Zhang,Shuo Wang,Xiaozhu Liu,Liang Ma
ABSTRACT A novel ratiometric electrochemical aptasensor based on split aptamer and Au-rGO nanomaterials was proposed to detect Aflatoxin M1 (AFM1). In this work, Au-rGO nanomaterials were coated on the electrode through the electrodeposition method to increase the aptamer enrichment. We split the aptamer of AFM1 into 2 sequences (S1 and S2), where sequence S1 was immobilized on the electrode due to the Au-S bond, whereas sequence S2 was tagged with methylene blue (MB) and acted as a response signal. A complementary strand to S1 (CS1) labeled with ferrocene (Fc) was introduced as another reporter. In the presence of AFM1, CS1 was released from the electrode surface due to the formation of the S1-AFM1-S2 complex, leading to a decrease in Fc and an increase in MB signal. The developed ratiometric aptasensor exhibited a linear range of 0.03 μg L −1 to 2.00 μg L −1 , with a detection limit of 0.015 μg L −1 for AFM1 detection. The ratiometric aptasensor also showed a linear relationship from 0.2 μg L −1 to 1.00 μg L −1 , with a detection limit of 0.05 μg L −1 in natural milk after sample pretreatment, indicating the successful application of the developed ratiometric aptasensor. Our proposed strategy provides a new way to construct aptasensors with high sensitivity and selectivity.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2023
·Vol. 13
·期 22
·2954
·
IF 5.3
Suyi Zhao,Zhenzeng Chong,Xiaogang Zuo,Wenjun Qi
For environmental remediation, it is significant to design membranes with good mechanical properties and excellent photocatalytic activity. In this work, RGO/TiO2membranes with heterogeneous structures and good photocatalytic efficiency were synthesized using the method of electrospinning combined with a thermal treatment process. In the binary nanocomposites, RGO was tightly adhered to TiO2fibers and by simply adjusting the loading of RGO, the strength and modulus of the fibrous membranes were improved. Notably, the RGO-permeated TiO2fibers exhibited 1.41 MPa in tensile strength and 140.02 MPa in Young’s modulus, which were 705% and 343% of the original TiO2fibers, respectively. Benefiting from the enhanced light response and the homogeneous and compact heterogeneous structure, the synthesized RGO/TiO2membranes displayed good antibacterial performance with a photocatalytic inactivation rate of 6 log againstE. coliwithin 60 min. This study offers a highly efficient alternative to inactivateE. colifor the synthesis of TiO2-based membranes.Keywords:RGO/TiO2;nanomembrane;photocatalytic;sterilization
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Lili Zhu,Yutong Cao,Bai Jiang,Junrong Yu,Jing Zhu,Zuming Hu
Incorporating compressibility , elasticity, and porous structures into microwave- absorbing materials will facilitate electromagnetic wave absorption (EMA) and improve environmental adaptability for practical applications. Herein, a strategy to prepare Ti 3 C 2 T x MXene/reduced graphene oxide (RGO)/ cellulose nanocrystals (CNCs) aerogels via a directed freezing method to design three-dimensional structures and strengthen the interaction between Ti 3 C 2 T x MXene and RGO lamellae is demonstrated. Oriented structures and the addition of CNCs benefit structural stability while achieving superior absorption performance by forming perfect impedance matching and multiple polarization effects. Interestingly, the prepared MXene/RGO/CNCs (MRC-20) aerogel delivers the prominent EMA performance in reported MXene-based absorbing materials, with a minimal reflection loss (RL min ) of − 72.32 dB at 12.0 GHz corresponding to a matching thickness of 2.56 mm and an effective absorption bandwidth (EAB) of 4.96 GHz at 1.88 mm with an RL min of − 59.87 GHz. Furthermore, by tuning the content of CNCs, the MRC-20 aerogel exhibits the highest stress (37.2 kPa) at 70% compressive strain and demonstrates the stability of the compression cycle. These intriguing features make the hybrid aerogel stand out among numerous absorbers.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2023
·Vol. 11
·期 42
·14641-14651
·
IF 6.4
Ziwen Wang,Zhen Qin,Biao Zhao,Han Zhu,Kai Pan
With the rapid development of artificial intelligence, the study of flexible pressure sensors has attracted great attention from researchers. However, in the face of extreme application environments such as aerospace and national defense, higher requirements are put forward for flexible pressure-sensing active materials. In this study, a novel electrospun polysulfonamide and polyacrylonitrile (PSAN) nanofiber-reinforced three-dimensional (3D) reduced graphene oxide aerogel (GA) is designed and fabricated. The pore wall of the aerogel has a leaf-like structure, the internal micropore has a “layer-pillar” structure, and the compression strength is as high as 26.07 kPa. The assembled piezoresistive sensor has a wide detection range (24.97 kPa), high sensitivity (32.85 kPa−1), and an extensive operating temperature range (−60 to 200 °C). It features a rapid response time of 300 ms at low pressure, excellent structural stability, and a sensing durability of over 3500 compression cycles. Moreover, the piezoresistive sensor can track the physiological and activity signals of the throat, face, fingers, elbows, knee joints, and other parts of the human body in real time, and has a stable sensing performance at ultra-low and high temperatures. These excellent sensing properties indicate that the GA aerogel has great application potential as a high-performance flexible piezoresistive active material in extreme environments.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES SCIENCE AND TECHNOLOGY
·
2021
·
IF 8.528
Fanghua Luo,Min Zhang,Songlin Chen,Jianfeng Xu,Chen Ma,Guohua Chen
Highly thermally conductive polymer composites are desirable for the thermal management of modern electronic devices. Although the thermal conductivity issue has been improved effectively with many methods, it always fails in maintaining the electrical insulation performance at the same time, which has become another great challenge. Here the sandwich-structured PVA/PVA-rGO/PVA (recorded as PVA/rGO) composite films simultaneously owning high thermal conductivity, excellent electrical insulation and outstanding flexibility were designed and prepared through self-construction strategy. The obtained results show that the prepared composite films achieved a high in-plane thermal conductivity of 4.00 W m −1 K −1 with only 5 wt% rGO loading, which was about 970% higher than that of pure PVA (0.413 W m −1 K −1 ). The high thermal conductivity is attributed to the formation of the homogeneous intermediate layer of PVA-rGO. In addition, the low filler loading makes the composite film remain excellent mechanical flexibility, and the PVA in the upper and lower layers of the composite film keeps good electrical insulation (volume resistivity beyond 10 9 Ω cm). The prepared composite films not only have great potential applications in the field of thermal management and flexible electronic devices but also have the possibility to conduct the mass production of polymer composites.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Ying Chen,Hongmei Liu,Xiuting Li,Shiwei Tang,Chenjie Gu,Guodong Wei,Tao Jiang,Xingfei Zhou
Molybdenum disulfide (MoS 2 ) with promising photocatalytic activity has attracted great attention in constructing recyclable SERS substrate. Reduced graphene oxide (RGO) was chose here to in-situ grow MoS 2 nanoflowers and effectively adjust the active area of the substrate. After the decoration of Ag nanoparticles by photo-reduction, a sophisticated RGO@MoS 2 @Ag ternary nanocomposite with a maximizing SERS enhancement factor (EF) of 8.6 × 10 6 and a prominent solar photocatalytic efficiency was demonstrated. Such superior features of the nanocomposite were revealed to be endowed by the synergistic effect of the three components including the active sites of MoS 2 , the “Schottky barrier” and “hot spots” between MoS 2 and Ag, together with the molecular enrichment surface and chemical enhancement ability of RGO . An ultra-sensitive SERS-based detection and a reliable photocatalytic degradation of mixed trace molecules were finally achieved by the developed optimal ternary nanocomposite, which can meet manifold requirements for the routine supervision of biochemical molecules.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Wenyan Yin,Khaled Tawfik Alali,Milin Zhang,Jingyuan Liu,Dalei Song,Qi Liu,Jing Yu,Rongrong Chen,Hongsen Zhang,Jun Wang
Ionic liquids are widely employed as electrolytes for electrochemical oxygen sensing due to their excellent physical and chemical properties. Recently, combining inorganic electrochemically active materials with ionic liquids are becomes intensively interesting to improve oxygen sensor performance. In this paper, two imidazolyl-based ionic liquids 1-ethyl-2,3-dimethylimidazole bis((trifluoromethyl)sulfonyl)imide [Emmim][TFSI] and 1-butyl-2,3-dimethylimidazole bis((trifluoromethyl)sulfonyl)imide [Bmmim][TFSI] with three saturated alkyl substituents on the aromatic ring were prepared by a traditional two-step method. Under the electrochemical test, both ionic liquids exhibit a certain responsibility to different concentrations of oxygen. Subsequently, α-Fe 2 O 3 /rGO was prepared by hydrothermal method and then mixed with the ionic liquids to prepare a composite ionic liquid electrolyte for detecting a wide range of oxygen concentrations. The response performance of prepared composite electrolyte toward the oxygen is improved, which exhibits a sensitivity of 0.1041 μA/[%O 2 ] to gradually changed oxygen concentration and a linear correlation (R 2 ) of 0.9997 between oxygen reduction peak currents. Hence, the results show that the pure ionic liquid has a certain ability to detect oxygen, while adding α-Fe 2 O 3 /rGO compounds further improve responsibility, stability and sensitivity of composite electrolyte to oxygen.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Wei Qi,Mengjie Li,Wei Chen,Jun Yang,Long Zhao
Radiation techniques, with their advantages of being clean, economical, and efficient, have been widely studied for the synthesis of nanocomposites. In this study, reduced graphene loading palladium nanoparticles (Pd/RGO) were prepared in situ in a single step at the phase interface of an ionic liquid (IL)-based microemulsion of these nanoparticles exposed to a high-energy electron beam. The influence of the radiation dose and initial mass ratio of graphene oxide (GO) and PdCl 2 were studied. In addition, the effect of the length of the alkyl chain of the IL on the shape and Pd nanoparticle content of Pd/RGO composites, as well as their electrochemical activity, were investigated in detail. The radiation dose did not affect the shape of the Pd nanoparticles but increased the Pd nanoparticle content of the Pd/RGO composites when the dose exceeded 80 kGy. The Pd nanoparticle content of the Pd/RGO composites decreased as the alkyl chain length of the ILs and the initial mass ratio of GO and PdCl 2 increased. Both the Pd nanoparticle content and their distribution in the Pd/RGO composites have a great influence on their electrochemical performance. Finally, Pd/RGO composites with excellent electrochemical activity were produced efficiently by using the radiation technique. This study provides a basis for the synthesis of carbon-based noble metal nanocomposites using a simple clean and efficient method.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）