COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Yunchang Fan,Jingjing Chen,Yanhe Nie,Sheli Zhang,Xinjia Wei,Haibao Zhu
From the perspectives of environmental protection and sustainable development, gold recycling is of paramount importance. This study presents a green synthesis of imine-based porous organic polymers (POPs) using an ionic liquid as the reaction medium. The imine groups within the POPs can be protonated under acidic conditions, transforming them into pH-responsive ionic POPs. Through a synergistic mechanism of electrostatic interaction and in situ reduction, the proposed POP demonstrates an exceptional gold adsorption capacity of 1299.6 mg g⁻ 1 , achieves rapid equilibrium within 15 min, exhibits high selectivity, and maintains excellent reusability over ten consecutive cycles. The adsorption process followed pseudo-second-order kinetic model and the Freundlich isotherm, while thermodynamic analysis confirmed its chemisorption nature. This work not only provides a novel strategy for fabricating ionic POPs but also demonstrates their significant potential for efficient gold recovery from electronic waste.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Zhen Wu,Xin Zhang,Yiyuan Tang,Wenzhao Wang,Qiming Zou,Lvming Qiu,Jiani Liu,Bin Hu,Min Gong,Guojie Wang
Smart fluorescent materials with tunable fluorescence in response to external stimuli are of great interest for anti-counterfeiting applications. Herein, we develop a photoresponsive fluorescent material (PRFM) SPD-CsPbBr 3 @PMMA that integrates perovskite CsPbBr 3 with photochromic spiropyran (SPD) in poly(methyl methacrylate) (PMMA), exhibiting multimode fluorescence outputs for advanced anti-counterfeiting applications. The blue-excitable CsPbBr 3 nanocrystals enable SPD-CsPbBr 3 @PMMA a stable green fluorescence at 450 nm excitation wavelength. Ultraviolet light irradiation of SPD-CsPbBr 3 @PMMA induces the isomerization of SPD from closed-ring to open-ring form and subsequently gives a stable red fluorescence. Fluorescence decay spectra and theoretical calculations indicate that an efficient energy transfer occurs from CsPbBr 3 to the open-ring SPD, thereby leading to significant changes in fluorescence. Upon irradiation with visible light (400–750 nm), SPD is reverted to closed-ring form, accompanied by the restoration of green fluorescence. SPD-CsPbBr 3 @PMMA can exhibit complex and tunable fluorescence changes under room light, blue light, and ultraviolet light modes, making it exceptionally suited for anti-counterfeiting applications. A novel strategy for information anti-counterfeiting by combining SPD-CsPbBr 3 @PMMA with Morse code and other innovative anti-counterfeiting platforms have been successfully developed. Overall, this study introduces an innovative approach to constructing multimode PRFMs, elucidates the design principles underlying fluorescence-tunable perovskite, and inspires further development in advanced anti-counterfeiting materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yuanyuan Shen,Xuerui Zang,Haibin Zhao,Fei Xu,Jiajia Wu,Peng Wang
Marine biofouling presents substantial economic and ecological challenges to maritime operations and the broader marine industry, highlighting the urgent need for effective antifouling technologies. In this study, we present a robust and straightforward strategy to fabricate liquid-like antifouling coatings (CAP–PMHS) by grafting natural capsaicin (CAP) onto the surface of poly(methylhydrosiloxane) (PMHS) through a one-step hydrosilylation reaction. The resulting eco-friendly coating significantly reduces bacterial adhesion by 96.3 ± 0.4% within 10 min. Mechanistically, the CAP–PMHS surface inhibits the initial adhesion and biofilm formation of Pseudomonas aeruginosa (microfouling organism) by disrupting bacterial chemosensory system and associated metabolic pathways. Furthermore, CAP–PMHS markedly suppresses the sensory responses of Crassostrea gigas (macrofouling organism) by targeting the sensory organs (foot region). Specifically, it effectively inhibits larval settlement by interfering with the chemosensitive transient receptor potential melastatin subfamily member 8 (TRPM8) channel, which is highly expressed in foot tissues of pediveligers. This simple yet effective design strategy, combined with molecular-level insights into sensing and adhesion mechanisms of fouling organisms, opens new pathways for developing non-lethal multifunctional antifouling materials with cross-species applicability. It further establishes a theoretical foundation for antifouling through bio-behavior modulation, enabling sustainable applications in marine antifouling, drag reduction, and biomedical engineering.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Liu Yang,Zhihong Wang,Qiqi Huang,Yingle Chen,Song Wang,Lei Zeng
This study investigated the design of bigel co-delivery systems employing gelatin hydrogel and oleogels with lacquer wax (LW), beeswax (BW) or mixed wax (MW) as an oleogelator. The typical T 2 relaxation signals in low-field NMR analysis and microscopic observations indicated that the bigels transitioned from O/H to H/O structure as the hydrogel/oleogel ratio decreased from 8:2 to 6:4, and utilizing MW could obtain bicontinuous structure at a hydrogel/oleogel ratio of 7:3 under our experimental conditions. Polarized microscopic images and XRD analysis revealed that BW-based bigels formed larger needle-like lipid crystals with a β′ form, whereas LW induced smaller β crystals and MW promoted the formation of both β and α polymorphs with intermediate size. This led to the greater elastic modulus (3518-463600 Pa) and hardness (237-1347 gf) of BW-based bigels compare to those containing LW (elastic modulus: 2255-256600 Pa; hardness: 172-317 gf). FTIR analysis indicated no chemical interactions between the gelatin hydrogel and different oleogels. All the bigels presented textural attributes and standardized dysphagia test results (level 6: soft & bite-sized) satisfying the requirement of dysphagia-friendly foods. In vitro digestion assays demonstrated that lower hydrogel/oleogel ratio and the use of BW contributed to reduced release rates of EGCG and Cur. However, when the hydrogel/oleogel ratio was fixed at 7:3, the use of MW resulted in the lowest release rates of EGCG (40.87% ± 0.48%) and Cur (15.15% ± 1.78%) due to the bicontinuous microstructure. These findings provide broader ideas for developing functional foods to accommodate the needs of dysphagia patients.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Ning Zhang,Chuanlong Jin,Shangping Wang,Junjiang Bao,Xiaopeng Zhang,Gaohong He
Abatract A polymer of intrinsic microporosity (PIM) membrane that commonly remains both highly permeable and mechanically robust under aggressive CO 2 feeds is still an unmet challenge. Here this work proposes a novel crosslinking strategy with dual-function compensation that simultaneously preserves free volume and enhances CO 2 dissolution for microporous membrane preparation. Amino-functionalized ZIF-8 (ZIF-8-NH 2 ) nanoparticles are dispersed in bromomethylated PIM (PIM-BM) and subsequently thermally crosslinked via Hofmann alkylation. The incorporated ZIF-8-NH 2 therefore acts simultaneously as covalent crosslinking nodes that restrict chain mobility and suppress physical aging/plasticization, and permanent CO 2 -philic pores (0.34 nm) that compensate the free volume loss upon crosslinking network formation. The optimal c-PIM/ZIF-9 wt% membrane exhibits an exceptional CO 2 permeability 6803.53 Barrer as well as CO 2 /N 2 selectivity of 29 with equimolar mixed gas. Meanwhile, the membrane also demonstrates remarkable resistance to both physical aging and plasticization. This work presents a novel strategy that offers a promising avenue for developing high-performance microporous membranes for particle carbon capture.
✓ 已验证
产品关联
DOI
高影响因子
PHYTOMEDICINE
·
2026
·
IF 11.3
Qiang-Ming Li,Man-Lei Zhu,Xiang Li,Jing-Xing He,Xue-Qiang Zha,Jian-Ping Luo,Feng-Yun Zhang
Background Identifying novel targets that ameliorating dopaminergic neuron iron metabolism dysregulation may provide potential therapeutic strategies for Parkinson’s disease (PD). Buddlejasaponin IVb (BJP-IVb) is the first natural product that can ameliorate iron regulatory protein 2 (IRP2)-mediated iron metabolism dysregulation in dopaminergic neuron to suppress PD. BJP-IVb may exert this bioactivity through novel target. However, the pharmacological target of BJP-IVb is unclear. Purpose This study aimed to discovery the potential novel target of BJP-IVb ameliorating dopaminergic neuron iron metabolism dysregulation in PD. Method BJP-IVb probe (BJP-IVb-P) were synthesized to identify the potential novel target by affinity-based protein profiling. The expression of DEAD-box helicase 17 (DDX17) was knocked down in vitro and in vivo to prove the potential novel target of BJP-IVb is DDX17. Results We proved that BJP-IVb could directly bind to DDX17. Dopaminergic neurons exhibit an elevated expression of DDX17 in PD. Dopaminergic neuron iron metabolism dysregulation and Janus kinase 2 (JAK2) and signal transducer and activator of transcription 5 (STAT5) signaling pathway activation in PD could be alleviated by the knockdown of DDX17 in vitro and in vivo . The inhibitory effect of BJP-IVb on dopaminergic neuron iron metabolism dysregulation and JAK2–STAT5 signaling pathway activation in PD could be abolished by the knockdown of DDX17 in vitro and in vivo . Conclusion This study first proved that DDX17 is a pharmacological target for ameliorating dopaminergic neuron iron metabolism dysregulation in PD, and BJP-IVb ameliorates dopaminergic neuron iron metabolism dysregulation by targeting DDX17.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LANGMUIR
·
2026
·
IF 3.9
Lifen Xiao,Jiahao Liao,Geng Huang,Jie Li,Wei Li
Developing novel formaldehyde-free wood adhesives with high bonding strength and stability is significant for the environment and for human health. This research developed a series of novel alcohol-based adhesives with different amounts of hydroxyl groups per repeat unit through ring opening metathesis polymerization (ROMP). P2OH exhibited a higher bonding strength than POH and P4OH owing to the strong adhesion and cohesion. In addition, the relationship between bonding strength and molecular weight was also investigated. Taking into account the chain entanglement and fluidity, P2OH500 achieved a highest bonding strength of 5.3 MPa in bonding wood sheets, which was capable of hanging a total weight of 11 kg. Furthermore, P2OH500 exhibited excellent solvent resistance, especially in hot water. The wood sheets retained more than 88% of the original bonding strength after soaking in water at 94 °C for 12 h. It is highly anticipated that this research will provide a new insight into designing formaldehyde-free adhesives with outstanding adhesion performances and excellent water resistance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 4.7
Xirui Yang,Zhaoji Li,Hongjia Liu,He Jin,Yifei Wang,Xiaokun Tang,Yinghu Song,Jialiang Li,Guojun Song,Yiwen Zheng,Zuwei Liu,Gaofeng Liu,Xiaoru Li
Herein, a dynamic multilevel hydrogen bonding strategy is proposed, and a polyurethane elastomer with high strength, high toughness, and efficient self-healing properties is successfully synthesized. By constructing a gradient hydrogen-bonding topology comprising both strong (urea-based) and weak (ester-based) hydrogen bonds, a hierarchically cross-linked network is established, effectively mitigating the conventional trade-off between mechanical strength and toughness in polyurethanes. The optimized polyurethane exhibits a tensile strength of 41.6 MPa and outstanding toughness (109.9 MJ·m–3), outperforming most reported polyurethane elastomers. The weak hydrogen bonds enable rapid self-healing (89% recovery after 2 h at 80 °C), while the strong ones contribute to structural integrity. Furthermore, the incorporation of an ionic liquid imparts good electrical conductivity to the material, allowing real-time monitoring of human joint movement and demonstrating potential in health monitoring and flexible sensing applications. This work provides a approach for constructing mechanically adaptive polymers based on a dynamic multilevel hydrogen bonding strategy, advancing the development of high-performance flexible electronic materials.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2026
·
IF 3.9
Zihan Ding,Junsheng Hou,Baiqi Tian,Li Ma,Dongyu Li,Xiong Zhao,Zhenzhen Chen,Chunlei Gao,Jinjia Wei,Nanjing Hao
The resource recovery and high-value utilization of coal gasification slag (CGS) are vital to promoting green and sustainable advancement in the coal chemical industry. However, synthesizing advanced functional materials with stable performance and high economic value from CGS remains a significant challenge. This research presents an approach to utilize coal gasification fine slag (CGFS) as an economical silicon source for the continuous production of SiO2 nanofluids in a spiral microreactor. The excellent mixing efficiency in the developed 3D-printed spiral microreactor is verified through numerical simulation and fluorescence visualization experiments. Following activation and desilication treatment of CGFS, the microreactor enables the continuous production of SiO2 nanofluids, which exhibit homogeneous particle dimensions and outstanding colloidal stability. The flow boiling heat transfer performance of the fabricated nanofluids in high-power chip cooling applications is systematically evaluated. The results reveal that the 0.01 wt % SiO2 nanofluids exhibit the best heat transfer enhancement, achieving a maximum increase of 49.52% in critical heat flux (CHF) and a 34.00% improvement in maximum heat transfer coefficient (HTC) compared to deionized water as the basic fluid. Through bubble visualization combined with deposition surface characteristic analysis, it is found that nanofluids effectively reduce the bubble size and shorten the bubble lifetime by increasing surface nucleation sites, improving wall wettability, and delaying bubble coalescence, thereby enhancing the boiling heat transfer process. This study not only establishes a novel pathway for the high-value utilization of CGFS but also offers theoretical insights and a technical foundation for developing cost-effective, high-performance cooling fluids.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Hao Chen,Xiao-Long Zhang,Jianyu Liu,Jie Liu,Xiaoli Liu,Zhirong Xin,Chunyang Bao
Developing fully recyclable aramid fiber-reinforced composites (AFRCs) with satisfactory mechanical properties combined with excellent and facile recyclability remains a significant challenge. In this study, we report fully recyclable AFRCs with substantially improved mechanical properties by using a poly(boron-urethane) (PBU) elastomer as the matrix. The PBU elastomer network dissipates energy efficiently through the breakage and reformation of reversible hydrogen bonds. As a result, the designed composites (denoted as AFx-PBUy, where x:y denotes the mass ratio of AFs to PBU elastomer) achieve a high mechanical strength of ∼498 MPa and good tear resistance, with a fracture energy of ∼621.4 kJ m–2. Moreover, the reversible hydrogen bonds allow the AFx-PBUy composites to be fully recycled under mild conditions. Through this process, both the pristine AFs and the PBU elastomer can be recovered quantitatively without loss of performance. The recovered materials can be readily reassembled into regenerated AFx-PBUy composites, which display properties comparable to those of the original composites.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2026
·
IF 16
Guanlin Wang,Xi Kong,Xiaofan Li,Chuangxin Chen,Kaiqing Zhang,Yue Zhou,Xiao Yue,Siyuan Peng,Wentao Wu,Wenhao Wang,Ziyu Zhao,Ying Huang,Xin Pan,Chuanbin Wu,Xuejuan Zhang
Clinical management of trigeminal neuralgia (TN) is hindered by poor neural bioavailability and systemic toxicity of oral drugs. While the nasal route offers a direct pathway to target the trigeminal nerve, rapid mucociliary clearance and competition from systemic absorption limit its effectiveness. To address these limitations, this study aimed to develop a biomimetic nasal gel system for targeted drug delivery to the trigeminal nerve. Inspired by the neurotropism of rabies virus, we engineered a thermoresponsive nasal spray gel (OMRLP@NSG). The system utilizes rabies virus glycoprotein (RVG)-modified liposomes coloaded with oxcarbazepine and mecobalamin. The liposomal formulation was specifically chosen to enhance drug stability, facilitate mucosal penetration, and provide a platform for neuron-specific targeting via RVG modification. Upon nasal administration, the OMRLP@NSG transitions from spray to gel, enhancing nasal distribution, mucosal adhesion, and neuron-specific targeting. Pharmacokinetics demonstrated a 3 h earlier Tmax and 537.25% higher relative bioavailability in trigeminal nerves versus oral Trileptal. OMRLP@NSG at 1/10th the Trileptal dose achieved comparable trigeminal nerve exposure while reducing off-target site concentrations by 74.18∼92.00% (plasma, brain, liver). Pharmacodynamics showed that the OMRLP@NSG significantly alleviated TN pain in rats, increasing the pain threshold by 3.92-fold over Trileptal. It also normalized the expression of pain-related neuropeptides (substance P and β-endorphin) to 112.05 and 98.81% of normal levels, respectively. Mechanistically, it suppressed P2 × 7R/NLRP3 inflammasome activation, downregulating IL-1β and TNF-α, thereby reducing neuronal damage and promoting remyelination. Additionally, long-term toxicity studies confirmed the favorable in vivo biosafety. This strategy transcends conventional systemic administration paradigms by resolving the tripartite challenge of spatial control, temporal retention, and cellular precision, thereby addressing the critical clinical demand for effective nose-to-brain delivery in trigeminal neuralgia.
✓ 已验证
DOI
PubMed
高影响因子
MACROMOLECULES
·
2026
·
IF 5.2
Shilong Wu,Xi Zeng,Qi-Lu Yuan,Huanhuan Yang,Wen-Sheng Xu,Quan Chen
This study examines how the segmental and chain dynamics of poly(methyl methacrylate) (PMMA) depend on tacticity. Dielectric response spectroscopy reveals a much stronger β-relaxation peak, more clearly separated from the α-relaxation process at T < Tg, for syndiotactic PMMA (sPMMA) than for isotactic PMMA (iPMMA). Linear viscoelastic measurements show similar rubbery plateaus for sPMMA and iPMMA, suggesting comparable entanglement molecular weights. In contrast, nonlinear extensional rheology exhibits substantially weaker strain hardening in sPMMA than in iPMMA. We propose that locally stiffer and more curved chain conformations in sPMMA reduce packing efficiency at T < Tg, facilitating flipping of planar ester groups that manifests as an enhanced β-relaxation in dielectric response spectroscopy. The same local stiffness probably leads to lower stretchability of the sPMMA chains, thereby leading to the weaker strain hardening at Weissenberg number much higher than one.
✓ 已验证
DOI
高影响因子