EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.8
Yunchao Xiao,Fanshu Meng,Min Su,Wei Fang,Yaru Yang,Yang Jiang,Xiangyang Xu,Jielai Yang
Articular cartilage repair remains a major clinical challenge due to its avascular nature, limited self-healing capacity, and the accompanying inflammatory microenvironment that impedes regeneration. Distinct from conventional hydrogels that suffer from rapid drug burst release and insufficient mechanical strength, this platform features spatiotemporally programmed dual-drug kinetics synchronized with tissue regeneration stages, alongside significantly reinforced mechanical properties derived from the fiber-network architecture. The system is fabricated by homogeneously dispersing chondroitin sulfate (CS)-loaded short PLGA nanofibers—generated via electrospinning followed by controlled chemical fragmentation—into a PLGA-PEG-PLGA (3P) thermogel pre-dissolved with dexamethasone sodium phosphate (DS). This hierarchical architecture enables minimally invasive delivery, rapid in situ gelation at body temperature, and sequential therapeutic action: immediate suppression of inflammation via DS release, followed by prolonged CS-mediated recruitment of mesenchymal stem cells and chondrogenic differentiation over a multi-week therapeutic window. The embedded nanofibers further serve as a percolating scaffold that substantially enhances the hydrogel’s structural integrity and load-bearing capacity. In a rat osteochondral defect model, a single injection of this composite hydrogel promoted the formation of well-integrated, hyaline-like cartilage with abundant proteoglycan and type II collagen deposition, closely resembling native tissue in both histological architecture and biomechanical functionality. By synergistically coupling immunomodulation, regenerative signaling, and mechanical competence within a clinically translatable platform, this work establishes a promising strategy for engineering multifunctional biomaterials capable of orchestrating complex tissue regeneration processes.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2026
·
IF 5.9
Wenbo He,Dongdong Ling,Yue Ma,Yansi Zhou,Wei Qi,Guoqing Pan
Dynamic biointerface based on lectin–sugar recognition precisely modulates cell fates. • Reversible ligand presentation enables temporal modulation of cell adhesion and macrophage polarization. • Ligand exchange also exerts temporal modulation over the adhesion and osteogenic differentiation of BMSCs. Dynamic biointerfaces, as materials that mimic extracellular matrix properties, confer surfaces the ability to dynamically recognize cell membrane receptors through the reversible presentation of active ligands, thereby modulating cell adhesion, migration, proliferation, and differentiation. However, chemical strategies used in the design of dynamic biointerfaces have limitations, including excessive introduction of exogenous chemical components and potential biosafety concerns. This study leveraged the specific recognition of mannose by concanavalin A (ConA) and glucose-mediated competitive displacement to reversibly present bioactive ligands comprising mannose-conjugated cell-adhesive peptide RGD and osteogenic growth peptide (OGP), designated MR and MO, respectively, thereby constructing a dynamic biointerface for spatiotemporal regulation of cell fate. The results demonstrated that MR ligand presentation promotes adhesion of L929 and EC cells, with glucose-mediated adhesion-desorption transitions. Additionally, it directionally modulates RAW 264.7 toward M2 polarization while inhibiting M1 polarization. This polarization effect exhibits time dependency and can be reversed by glucose. Moreover, the interface enables sequential ligand switching through a concentration-dependent MR/MO ligand competition mechanism: MR ligands promote early BMSCs’ adhesion, while MO ligands induce later osteogenic differentiation. This entire process is reversibly modulated by glucose, thereby achieving precise regulation of cellular behavior. This work presents a feasible strategy for designing intelligent biomaterials that are responsive to endogenous metabolic signals, with promising utility in precision regenerative medicine and therapeutic interventions for metabolic disorders.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Xiaoyu Li,Taipei Li,Xuebing Xu,Hong Zhang,Xiaolan Xu,Yanbo Wang,Duoxia Xu,Baoguo Sun
SOMA-PL complex formed by oil body protein aggregates-phospholipid assembly. • Hydrogen bond, hydrophobic and electrostatic forces drove SOMA-PL complex formation. • PL binding promoted suprastructure extension and enhanced adhesion force of complex. • SOMA-PL complex formed bilayer artificial oil body (AOB) upon emulsification. • Bilayer AOB emulsion showed higher yield, thicker interface and rigid droplets. This study aimed to improve the stability and functional characteristics of artificial oil body (AOB) emulsion. Herein, we constructed soybean oil body membrane protein aggregates (SOMA) and phospholipids (PL) complex as novel membrane material to fabricate AOB emulsion, focusing on bilayer membrane droplets. PL binding altered SOMA particle charges, forming the SOMA-PL complex. Spectroscopic analyses and molecular docking results indicated that SOMA and PL primarily interacted through hydrogen bonding and hydrophobic interactions. The complex had an extended suprastructure and maximum lamellar repeat distance (46.54 Å). Force curve showed that the complex exhibited intermediate rigidity and the highest adhesion (7.64 nN), balancing the rigidity of PL with the flexibility of the protein. In AOB fabrication, the complex produced smaller droplets with thicker interfacial layers and clear bilayer membranes, enhancing deformation resistance and physical stability. These findings provide a foundation for designing AOB emulsions with tailored interfacial architectures for food ingredient delivery. Download: Download high-res image (170KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ULTRASONICS SONOCHEMISTRY
·
2026
·
IF 10.2
Ruida Li,Huaxing Li,Fafeng Xia,Chunyang Ma,Zhongmin Xiao
To overcome the challenge of building stage-wise energy storage devices with tunable charge distribution, a novel electrodeposition method was developed using ultrasonic disruption. This technique enabled the fabrication of nickel–cobalt–manganese (Ni-Co-Mn) ternary oxide electrodes with vertically graded structures. The gradient was created by sequentially depositing four layers under varying ultrasonic power densities (10–40 W·cm −2 ) and substrate tilt angles (15°-45°). By precisely adjusting these parameters, a series of vertically graded NCM-x electrodes was synthesized. Among them, the NCM-11 sample, prepared using a power density ( P ) equal to 30 W·cm −2 and a tilt angle of 35°, revealed the most favorable morphology and electrochemical performance. Characterization using TEM and XPS confirmed the uniform distribution of NiO, Co 3 O 4 , and MnO 2 phases. BET analysis exhibited a specific surface area equaling 56.97 m 2 ·g −1 . Electrochemical measurements revealed that NCM-11 delivered a high specific capacitance equal to 1430.7F·g −1 at 1 mA·cm −2 , retaining 1334.9F·g −1 even at 15 mA·cm −2 , with excellent cyclic stability, maintaining 93.3 % of its capacitance following 5000 cycles. When assembled into an asymmetric supercapacitor (NCM-11//AC), the device achieved an energy density equal to 45.6 Wh·kg −1 at P = 830.7 W·kg −1 , and 30.8 Wh·kg −1 at P = 2440.3 W·kg −1 . It also demonstrated exceptional long-term stability, maintaining 96.2 % of its capacitance following 5000 cycles. These findings showcase the prospective value of ultrasonic-assisted, gradient-controlled electrodeposition for developing high-performance supercapacitor electrodes.
✓ 已验证
产品关联
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Chen Li,Peipei Ma,Xiaoyue Sui,Aminu Abdullahi Mahmoud,Xinyu Liao,Tian Ding,Runrun Zhang
The stable food-grade lauric acid emulsions were developed. • Emulsions showed homogeneous structure and good viscoelastic stability. • The emulsions exhibited notable antioxidant activity and activity against S. aureus . • Antibacterial activity linked to membrane damage and energy disruption. Lauric acid (LA) is an antimicrobial medium-chain fatty acid, but its poor aqueous solubility limits its application in food matrices. To address this, ultrasound-assisted emulsion was developed using LA in vitamin E (VE) oil and chitosan-polyvinyl alcohol (CS-PVA) aqueous matrix. The emulsion exhibited uniformly dispersed oil droplets forming a compact network structure, along with superior stability and viscoelastic properties. No phase separation was observed during storage except for the 5 CP/VL system after 30 days, where CP/VL refers to the CS-PVA/VE-LA. Functionally, the emulsion disrupted bacterial membrane integrity and interfered with cellular energy metabolism. The 10 CP/VL formulation achieved a favorable balance between stability and bioactivity, with DPPH scavenging rate of 26.57% and 2.8 log CFU/mL reduction of Staphylococcus aureus after 2 h at 1% concentration. Overall, this study provides a feasible strategy for enhancing the dispersion and function of LA in aqueous systems for food-related applications. Download: Download high-res image (399KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Jiang Chang,Weimin Guo,Lixin Sun,Qiang Wang,Jingyuan Zhang,Xiaoyu Zhao,Xiangrui Meng,Kuo Zhang,Qiu Fu,Lijian Sun
A simple and scalable method is used to prepare multifunctional bio-based films. • Natural gardenia yellow was first used as a UV and blue light absorber. • The films exhibit high transparency and excellent protection against harmful light. • Integrated fire safety and antibacterial properties were achieved. • The films exhibit excellent mechanical strength and biodegradability. The integration of multiple functionalities into a single material system, while simultaneously ensuring sustainable processing and high transparency, remains a critical challenge in materials design. Herein, a multifunctional cellulose film is developed through a supramolecular engineering strategy that orchestrates the synergistic interplay of carboxymethylated cellulose, gardenia yellow (GY), and phosphorylated chitosan (PCS). The process involves alkali/urea assisted regeneration of cellulose into hydrogel matrix, followed by incorporation of a pre-assembled GY-PCS complex. The resulting films exhibit exceptional optical management capabilities, achieving light shielding efficiencies of 52.5–69.9% for UV-A, 55.6–68.3% for UV-B, and 72.5–91.1% for high-energy blue light (HEBL). The films demonstrate superior blue light filtering performance compared to commercial counterparts. Encouragingly, the films exhibit high transmittance of 90–90.8% and low haze of 1.8–2.0% at 600 nm. In practical applications, the films effectively block blue light radiated by illumination system, computer screen and smartphone screen. Notably, the incorporation of PCS imparts ideal flame-retardant properties, increasing the limiting oxygen index (LOI) from 19.2% to 32.1%. Moreover, the films exhibit excellent antimicrobial activity. Benefiting from the synergistic hydrogen-bonding network, the tensile strength of the films achieves a substantial increase ranging from 11.1% to 18.7%. This simple strategy would direct cellulose films toward diversified applications.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Daqi Chen,Zhezhi Fang,Limin Wang,Tao Zou
Ultrasensitive and field-deployable detection of Pb 2+ is highly desirable for environmental monitoring and public health protection. Nucleic acid-based sensors are promising for this purpose because they are programmable and compatible with isothermal analysis. However, current amplification strategies face a fundamental trade-off: enzyme-assisted methods provide high sensitivity yet require unstable protein catalysts and cold-chain logistics, whereas enzyme-free circuits are operationally robust but suffer from thermodynamic background leakage. To address this sensitivity–stability paradox, we propose PADLOCK (Pb 2+ -Activated Dual-DNAzyme Locked On-site Cascade Kit), a protein-enzyme-free amplification strategy operating at ambient temperature (25 °C). PADLOCK uses a two-stage catalytic cascade for high-gain signal amplification. Specifically, the upstream GR-5 DNAzyme module was optimized by tuning hairpin stem complementarity and loop geometry to suppress premature trigger release, while the downstream self-locked DNAzyme (SLD) was redesigned through base-pair engineering to improve the signal-to-noise ratio. This cascaded “cleavage-then-unlock” architecture achieves amplification gains substantially exceeding those of conventional enzyme-free circuits such as catalytic hairpin assembly (CHA) or hybridization chain reaction (HCR), while maintaining near-zero background, a combination that is difficult to achieve in enzyme-free systems. Under optimal conditions, PADLOCK demonstrates a sensitivity range of 1 pM to 1 μM with a detection limit of 342 fM and exceptional selectivity over eight competing ions. Reliable quantification in real water and soil samples yielded spike recoveries of 98.17%–111.69%. Furthermore, integration with a custom-built smartphone imaging interface further enables visual monitoring across 100 pM–1 μM, providing a robust, point-of-care testing (POCT) platform that eliminates cold-chain logistics and enables ambient-temperature operation for decentralized heavy-metal screening in resource-limited settings.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Zhang Shiping,Luo Shu,Huang Zhaoning,Zhao Siyuan,Luo Xia
Bitterness is a major sensory barrier limiting the application of Ganoderma species, yet the metabolic basis underlying interspecific bitterness differences remains poorly understood. This study integrated sensory evaluation, untargeted LC-MS-based metabolomics, weighted gene co-expression network analysis (WGCNA), and quantitative compositional analysis to systematically compare Ganoderma lucidum ( GL ), Ganoderma sinense ( GS ), and Ganoderma leucocontextum ( GLE ). Sensory evaluation revealed that bitterness serves as a key distinguishing attribute among the three species, with GS exhibiting significantly lower bitterness intensity. A total of 27 core bitter-related metabolites were identified, including ganoderic acids, bitter dipeptides, flavonoids, and alkaloids. WGCNA further confirmed the close association of these metabolites with bitterness. Quantitative analysis demonstrated that bitterness intensity was strongly correlated with the selective accumulation of specific ganoderic acid monomers rather than total triterpenoid content. KEGG pathway enrichment indicated that these bitter metabolites were primarily involved in amino acid metabolism, terpenoid backbone biosynthesis, and secondary metabolite biosynthesis pathways. Notably, the identified bitter-related ganoderic acids are also known to possess anti-inflammatory, immunomodulatory, and antitumor activities. These findings provide a metabolic framework for understanding bitterness differences among Ganoderma species and offer potential targets for quality control and flavor-oriented breeding strategies.
✓ 已验证
产品关联
DOI
高影响因子
STAR Protocols
·
2026
·Vol. 7
·期 3
·104786
·
IF 1.4
Yuchen Huang,Lexuan Hou,Lin Zhu,Xi Yang,Gang Li
Summary Here, we present a dynamic combinatorial library-versus-proteome activity-based protein profiling (DCL-ABPP) workflow for high-throughput covalent ligand discovery. We describe steps for integrating a dynamic combinatorial library with proteome-wide mass spectrometry to generate and screen hundreds of ligands in situ , eliminating the need for pre-synthesis. We detail procedures for two complementary modes: competitive screening, which identifies enzyme inhibitors (e.g., serine hydrolases) through family-wide probe competition; and direct screening, which maps covalent ligand binding sites on cysteines. For complete details on the use and execution of this protocol, please refer to Huang et al. 1
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Yonghui Guo,Ruyu Yan,Yaya Jia,Yiming Yang,Zihan You,Xiaoyan Zhang,Shan Liu
Severe limitations like interface corrosion and dendritic proliferation on zinc anodes significantly restrict the practical application of aqueous zinc-ion batteries (AZIBs). Here, we introduce N -methylurea (NMU), a bifunctional electrolyte additive that concurrently regulates the electric double layer (EDL) and functions as an in situ solid electrolyte interphase (SEI) precursor. This substance has a tendency to adhere to the surfaces of zinc substrates, driving out water molecules to prevent the production of hydrogen and speed up the movement of Zn 2+ . Adsorbed N -methylurea is next electroreduced to create the situ solid electrolyte interphase, a dense organic-inorganic composite with Zn N bonding that physically separates the anode from the bulk electrolyte. This dual-protection mechanism enables the following stable electrochemical performance: a long-term lifespan of over 5500 h at a current density of 2 mA cm −2 and more than 650 h at 20 mA cm −2 , together with a high average Coulombic efficiency (CE) of 99.5%. The present research verifies that one dual-functional electrolyte additive can tackle the persistent conflict between corrosion and dendrite formation within aqueous zinc cells synchronously, which delivers outstanding cycling stability and energy efficiency and creates an economical, feasible route for industrial scaling. This work introduces a trace amount of N -methylurea as an additive in a conventional 2 M ZnSO 4 electrolyte to stabilize the Zn anode. N -methylurea, an asymmetric monomethyl-substituted urea with the formula CH 3 -NH-CONH 2 , contains three functional groups capable of equilibrium simultaneously: the unsubstituted amino group, monomethylated -NHCH 3 , and the central C O moiety. The interlayer structure of N -methylurea facilitates rapid Zn 2+ deposition via a “drag-shielding” mechanism, markedly enhancing the electrochemical stability and cycling durability of aqueous zinc metal batteries. It also effectively mitigates rough deposition morphology and dendrite growth on bare Zn anodes. Therefore, the Zn||Zn symmetric cell, containing 4 wt% N -methylurea, operated stably for 5500 h at 2 mA cm −2 and 650 h at 20 mA cm −2 , and the Zn||Cu asymmetric cell achieves an impressive 300 cycles with an exceptionally high coulombic efficiency of 99.5% at 2 mA cm −2 , demonstrating excellent reversibility. Download: Download high-res image (154KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 7.4
Yu Xia,Aiping Wang,Qiao Hu,Guangming Han,Kaidi Gao,Yangyang Gao,Ruize Wang,Yongqi Wang,Jianfeng Yao
A well-designed Fe-N dual sites amino-functionalized (MIL-101(Fe)-NH 2 ) separator is fabricated. • The unsaturated Fe sites in the MOF act as strong anionphilic modifiers to adsorb PF 6 − . • The polar -NH 2 groups act as Lewis's base sites to enhance electrolyte wettability. • The synergistic Fe-N sites induce the formation of a stable solid electrolyte interphase. • This separator can regulate lithium deposition and enable high-performance lithium metal batteries. Lithium-based batteries utilizing metallic lithium anodes have attracted widespread research interest due to their exceptional theoretical energy density. However, the growth of dendritic lithium structures, unstable solid electrolyte interphase (SEI) and associated safety concerns pose substantial obstacles to their commercial application. Traditional polypropylene (PP) separators suffer from poor electrolyte affinity and electrochemical inertness, causing heterogeneous Li + distribution and severe interfacial polarization. Herein, an amino-functionalized MIL-101(Fe)-modified PP separator is successfully developed to regulate Li deposition through the synergistic effects of Fe-N dual active sites. The unsaturated Fe sites in the MOF act as strong anionphilic modifiers to adsorb PF 6 − and suppress anion migration; the polar -NH 2 groups act as Lewis's base sites to enhance electrolyte wettability and accelerate ion transport. These synergistic Fe-N sites induce the in-situ formation of a stable LiF/Li 3 N-rich and flexible inorganic-organic hybrid SEI, preventing the penetration of dendritic lithium. Electrochemical testing reveals that the Li|Li symmetric cells achieve more than 650 h of uniform lithium deposition and also stable cycling at elevated temperatures. Furthermore, the LiFePO 4 |Li cells and the LiFe 0.5 Mn 0.5 PO 4 |Li cells employing this modified separator demonstrate superior cycling stability and enhanced rate capability. Modifying separators with functionalized metal-organic frameworks (MOFs) presents a plausible strategy to improve the performance of electrochemical batteries, contributing to an in-depth discussion of the application of MOFs in lithium battery technology. Amino-functionalized separators (PP@MIL-101-NH 2 ) are successfully designed to regulate ion transport for high-performance lithium metal batteries. The unsaturated Fe sites in the MOF act as strong anionphilic modifiers to adsorb PF 6 − ; the polar -NH 2 groups act as Lewis's base sites to enhance electrolyte wettability. Synergistic Fe-N sites induce the formation of a stable LiF/Li 3 N-rich solid electrolyte interphase, preventing the penetration of dendritic lithium. Download: Download high-res image (365KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Zhuoran Ao,Huixin Ren,Yuxi Guo,Lijing Yan,Zhan Lin
Sub-micron Bi chemically anchors polyiodides via Bi-I bonds to suppress shuttling. • S-Bi acts as both an iodine host and an electroactive capacity contributor. • A cascade reaction involving I 0 /I − and Bi 3+ /Bi redox couples is realized. • The Zn–I₂ battery delivers 245 mAh g −1 and cycles 20,000 times with 77.7% retention. • A pouch cell achieves 5.26 mAh cm −2 under 22 mg cm −2 mass loading. Polyiodide shuttling is the primary obstacle to impede the practical application of aqueous zinc–iodine batteries (AZIBs). Although various host materials have been developed to suppress the shuttle effect, most of them are electrochemically inactive and inevitably reduce the overall energy density of the cathode. Herein, sub-micron bismuth (S-Bi) powder as a multifunctional redox-active iodophilic additive was introduced into the iodine electrode to simultaneously regulate iodine conversion chemistry and contribute additional electrochemical capacity. Experiment results showed that S-Bi powder with high electronic conductivity and mesopore structure can chemically anchor polyiodide by forming Bi-I bonds, which benefits suppressing polyiodide shuttling and enhancing reaction kinetics. More importantly, a cascade reaction process containing I 0 /I − and Bi 3+ /Bi redox couples is realized, significantly boosting battery capacity. In-situ XRD characterization revealed the conversion route of bismuth species (BiOI ↔ Bi 2 O 3 ↔ Bi) during the reaction, providing the direct evidence for the bismuth-involved cascade reaction mechanism. As a result, the assembled AZIBs based on S-Bi powder deliver a high discharge specific capacity of 245.19 mAh g −1 at 0.5 A g −1 and operate stably for 20,000 cycles at 3 A g −1 with a capacity retention of 77.7%. Encouragingly, the pouch battery achieves an areal capacity of 5.26 mAh cm −2 under a high active material mass loading of 22 mg cm −2 , demonstrating practical application potential. This work paves the way for designing materials with iodine affinity and redox activity to simultaneously suppress polyiodide shuttling and contribute extra capacity for AZIBs. Submicron mesoporous bismuth as a functional additive in I₂/KB cathode establishes a cascade reaction mechanism and inhibits polyiodide shuttling by forming Bi-I bonding, enabling 20,000-cycle stability. Download: Download high-res image (105KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子