文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4729至4740个,产品总数347,550个

切换升序
JOURNAL OF MOLECULAR LIQUIDS · 2026 · IF 5.2

Phenolphthalein molecularly imprinted polymers utilizing a ternary deep eutectic solvent as a composite functional network: Computationally-guided synthesis and adsorption performance

Xun Lu,Xiaohua Wang,Kejie Dong,Wei Xie,Youhong Zhang,Guohong Zhou

A ternary deep eutectic solvent was used as a composite functional network for phenolphthalein imprinting. • Density functional theory calculations guided solvent selection and clarified the stability of the PhIn–TDES preassembled complex. • Molecular electrostatic potential, frontier molecular orbital, and interaction region indicator analyses revealed the molecular recognition mechanism. • Experimental validation confirmed ethanol as the favorable polymerization solvents and 1:6 as the optimal imprinting ratio. • The resulting MIP exhibited high adsorption capacity, selective recognition and good reusability toward phenolphthalein. Phenolphthalein (PhIn), as a carcinogenic illicit additive and environmental contaminant, demands efficient enrichment and detection. To develop a high-performance and green separation material, a molecularly imprinted polymer (MIP) for PhIn was constructed using a ternary deep eutectic solvent (TDES) composed of choline chloride/caffeic acid/formic acid (ChCl/CA/FA = 3:1:1) as the composite functional network. Density functional theory (DFT) was employed to perform geometric optimization, binding energy evaluation, and solvent effect analysis of the template–composite functional network system, while molecular electrostatic potential (MEP), frontier molecular orbital (FMO), and interaction region indicator (IRI) analyses were further conducted to elucidate the multiple hydrogen-bonding interactions and other weak intermolecular forces between PhIn and TDES. Theoretical screening identified ethanol as the most favorable polymerization solvent, and subsequent experiments determined a best PhIn-to-TDES imprinting ratio of 1:6 for polymer synthesis. The resulting materials were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, and their adsorption behavior was assessed through isothermal adsorption and kinetic studies. The results indicate that the prepared MIP achieved an adsorption capacity of 68.17 mg g −1 at an PhIn concentration of 600 mg L −1 , together with an imprinting factor of 1.86. This study not only demonstrates the effectiveness of TDES as a composite functional network for the selective enrichment of PhIn, but also provides a theoretical basis and technical reference for the rational design of green imprinting materials based on deep eutectic solvents. Download: Download high-res image (151KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Science China-Materials · 2026 ·Vol. 69 ·期 2 ·1104-1112 · IF 7.7

A self-powered electrical stimulation suture for muscle tissue repair in rabbits

Sun Guifang,Jin Yuefan,Sun Zhouquan,Lu Haifeng,Li Linpeng

Sutures, as necessary medical devices for postoperative treatment, are no longer merely supportive but are required to have advanced functions to promote repair. Here, we report an absorbable self-powered electrical stimulation suture. The suture is composed entirely of absorbable materials (magnesium, polylactic acid, and polycaprolactone) and can be used in vivo for incision closure and repair. The suture has the capacity to generate spontaneous electrical stimulation in response to body movement, allowing for accelerated tissue reconstruction. An in vivo muscle incision repair model demonstrated that the wound healing rate under treatment with this suture was 1.6 times faster than that of commercial sutures, proving its postoperative therapeutic capability.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Different materials encapsulating retinol form different carrier structures: Spectroscopic studies and molecular dynamics mechanisms

Mengju Xu,Hongmeng Ren,Jingsi Ma,Ruitao Zhao,Yongmin Zhang,Faxin Zhang,Keren Pang,Jianjun Xue,Jiaping Zhou,Mingyuan Li

Self-assembled nanoparticles constructed by food-grade PVP K30 achieve highly efficient entrapment of hydrophobic RE. • PVP K30 is rich in "branches", exhibiting stronger encapsulation and protection of RE than "linear" P188 and PEG4000. • RESD (PVP K30) could significantly enhance the solubility of RE. • The encapsulation of RE in RESD (PVP K30) was driven by electrostatic adsorption, assisted by hydrogen bonding and hydrophobic interactions. The poor stability and low solubility of retinol (RE) have severely restricted its applications, especially in food products. PEG 4000, Poloxamer 188 (P188) and PVP K30 exhibit distinct differences in glass transition temperature, hydrogen bonding ability and amphipathic properties, and we employed the three polymers as edible matrices to fabricate retinol solid dispersion (RESD). UV–vis, FTIR, XRD and DSC deliver consistent findings; functional group shifts, weakened crystal peaks and high-temperature shifted melting endotherms jointly confirm amorphous RE encapsulation in RESDs. Compared with RESD (PEG 4000) and RESD (P188), RESD (PVP K30) had the strongest stability and the highest encapsulation rate (93.42%) owing to its stronger hydrogen bonding and higher glass transition temperature. After dissolving the RESDs, the RESD (PVP K30) formed a nanoparticle structure in water with clear appearance (particle size: 72.99 nm), superior to the other two RESDs. With over 1000-fold improved aqueous solubility of RE, RESD(PVP K30) achieved lower IC 50 and superior antioxidant activity in DPPH and hydroxyl radical assays, alongside a 130-fold increase in cumulative release rate. MTT tests using B16F10 cells verified RESD (PVP K30) had good biocompatibility, with over 90% cell viability across 0.1–0.5 mg/mL RE after 24 h treatment. Molecular dynamics simulations reveal visualized molecular trajectories, with electrostatic adsorption serving as the key driving force enabling effective encapsulation by RESD (PVP K30). Hydrogen bonding and hydrophobic interactions synergistically regulate the encapsulation process.These findings provide important insights for RESD (PVP K30) to be used in foods, cosmetics and pharmaceuticals. Download: Download high-res image (183KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
VACUUM · 2026 · IF 4.3

Study on the thermal decomposition and combustion of DAP-4 affected by copper(II) fluoride

Meng Li,Haiting Liu,Guoliang Liu,Jiani Dong,Jia Gao,Binbin Zhang,Xueyong Guo,Hua Fang,Xiong Cao

Molecular perovskite energetic material (H 2 dabco)[NH 4 (ClO 4 ) 3 ] (DAP-4) has attracted significant attention. However, its high thermal decomposition temperature hinders its application in propellants. To reduce its reaction energy barrier and modulate its decomposition and combustion performance, the catalytic effect of copper fluoride (CuF 2 ) on the thermal decomposition and combustion behavior of DAP-4 was systematically investigated in this work. DAP-4/CuF 2 composites with different CuF 2 contents (1 wt%, 3 wt%, and 5 wt%) were prepared by a mechanical mixing method. Their morphology, thermal behavior, reaction products and combustion mechanism were comprehensively characterized by SEM, XRD, DSC, TG, high-speed combustion photography, XPS and MS. The results indicated that the CuF 2 significantly reduced the thermal decomposition temperature of DAP-4 with a maximum decrease of 35.2 °C and the apparent activation energy decreased markedly, dropping from 370.40 kJ/mol for pure DAP-4 to approximately 155.82 kJ/mol for the DAP-4/5 wt%CuF 2 . Combustion experiments revealed that both the combustion pressure and pressurization rate were enhanced. A possibly reaction mechanism of energy release of DAP-4 with CuF 2 was proposed that CuF 2 accelerated the initial decomposition of DAP-4 through proton transfer reactions between ClO 4 − /F − and NH 4 + , leading to enhancing the reaction kinetics. This study provided a new pathway for the design and fabrication of DAP-4-based energetic materials in solid propellants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MICROPOROUS AND MESOPOROUS MATERIALS · 2026 · IF 4.5

Cobalt (II)-doped zirconium-based metal-organic framework: facilitating tetracycline removal from aqueous solution

Pu Shi,Kunran Liang,Zhuojun He,Shiya Qin,Meiwang Li,Yi Li,Jinhao Cao,Hai-Bo Liu,Jing Wang

Post-synthetic modification: site-specific Co 2+ doped into Zr 6 clusters of NU-1000. • High-capacity removal: Co-NU-1000 MOF adsorbed tetracycline up to 629.8 mg/g. • Synergistic adsorption mechanism: electrostatic, π–π stacking and Co 2+ coordination. • Superior reusability and stability: over 80% adsorption capacity after five cycles. • Promising performance: ≥90% tetracycline removal efficiency in complex water matrices. In this study, a bimetallic metal-organic framework (MOF), Co-NU-1000, was constructed for the efficient removal of tetracycline (TC) from aqueous solution. Co-NU-1000 was fabricated via post-synthetic metallation by doping Co 2+ into the Zr 6 clusters of the Zr-based MOF NU-1000. The adsorption performance was systematically evaluated under varying experimental conditions, including pH, adsorbent dosage, and temperature. The results showed that Co-NU-1000 exhibited a maximum adsorption capacity of 629.8 mg/g for TC, significantly higher than that of the pristine NU-1000. The adsorption process followed the pseudo-second-order kinetic model and was well described by the Freundlich isotherm model, indicating a heterogeneous, favorable, and chemisorption-dominated mechanism. Thermodynamic analysis revealed that the adsorption was spontaneous and endothermic. Additionally, Co-NU-1000 demonstrated good reusability, retaining over 80% of its adsorption capacity after five regeneration cycles. The material also showed promising performance in real water samples, with a removal efficiency of over 90% in tap and lake water. These findings highlight Co-NU-1000 as a highly effective and reusable adsorbent for TC removal from contaminated water sources. Co-NU-1000, a bimetallic MOF synthesized via post-synthetic Co 2+ doping into NU-1000's Zr 6 clusters, achieves a maximum tetracycline adsorption capacity of 629.8 mg/g. Driven by electrostatic interactions, π-π stacking and Co 2+ coordination, it shows excellent reusability and real-water applicability for antibiotic remediation. Download: Download high-res image (418KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Surface-functionalized mica enables pangolin-scale-inspired self-welded polyarylate nanofiber insulating paper with enhanced dielectric and mechanical reliability

Yuyan Hu,Hua Ma,Han Ye,Qiwen Gan,Yuping Chen,Yuan Zhang,Luoxin Wang,Hua Wang,Siwei Xiong

Overcoming the interface adhesion and structural strength limitations of traditional insulating paper. • Enhancing dielectric and mechanical properties via PAR nanofiber self-welding strategy. • Achieved 134.48 kV mm −1 breakdown strength in TMS@Mica/PAR −a 5.3 increase vs. aramid paper. High-voltage insulation systems require dielectric papers that can withstand elevated temperatures and complex mechanical deformation, yet conventional aramid and mica papers suffer from weak interfacial adhesion and limited structural robustness. Inspired by the hierarchical overlapping structure of pangolin scales, we developed a surface-functionalization-assisted self-welding strategy to fabricate mica/polyarylate nanofiber composite insulating paper with robust organic/inorganic interfaces. Sericite mica platelets were modified with trimethoxy(2-phenylethyl)silane, forming covalently anchored organosilane layers through condensation between silanol groups and surface hydroxyls. The introduced phenylethyl groups promoted π-π interactions with thermotropic liquid-crystalline polyarylate nanofibers, thereby enhancing mica dispersion, interfacial wettability, and adhesion. Through wet ball milling and controllable hot pressing, the surface-functionalized mica platelets were uniformly embedded and aligned within the polyarylate nanofiber network, forming a pangolin-scale-like laminated architecture. During hot pressing, the thermoplastic nanofibers underwent in situ self-welding, producing compact, continuous, and defect-suppressed interfacial regions. The combined effects of covalent anchoring, π-π coupling, bioinspired layered assembly, and interfacial densification reduced interfacial voids and local electric-field distortion. Consequently, the TMS@Mica/PAR paper exhibited a breakdown strength of 134.48 kV mm⁻ 1 , 25.14% higher than unmodified Mica/PAR paper and markedly exceeding commercial aramid paper and mica paper. After aging at 200 ℃ for 24 h, it retained a breakdown strength of 120.93 kV mm⁻ 1 and showed only slight degradation after repeated folding and crumpling, demonstrating excellent thermal stability and mechanical durability. Download: Download high-res image (229KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS CHARACTERIZATION · 2026 · IF 6.2

In-situ ZrB2@SiO2 core-shell construction for high oxygen-barrier ZrB2-SiC coatings with continuous oxygen-barrier networks at 1973 K

Yuexing Chen,Xiang Ji,Chengshan Ji,Zhichao Shang,Tianyu Liu,Xuanru Ren,Jiaqi Zhu

In situ SiO 2 shells pre-establish oxygen-barrier networks in ZrB 2 -SiC coatings. • Core-shell ZrB 2 @SiO 2 improves interfacial continuity and particle packing. • Pre-positioned SiO 2 accelerates early-stage oxygen-barrier formation. • ZrO 2 and ZrSiO 4 dispersoids stabilize the borosilicate glass matrix. • ZrB 2 @SiO 2 -SiC lowers mass gain by 69% and gives 99.82% protection. Conventional ZrB 2 -based coatings rely on amorphous phases generated during oxidation to seal coating defects, which delays the establishment of an effective oxygen barrier. Here, an amorphous SiO 2 shell was constructed in situ on ZrB 2 particles through a sol-gel process, and the resulting core-shell powders were combined with SiC to prepare ZrB 2 @SiO 2 -SiC coatings. SiO 2 -free ZrB 2 -SiC and mechanically mixed ZrB 2 -SiO 2 -SiC were used as reference systems to distinguish the effect of SiO 2 incorporation from that of the core-shell configuration. Compared with the mechanically mixed system, the shell-derived phase became interconnected along ZrB 2 particle boundaries during sintering, improving interfacial continuity and suppressing particle agglomeration. During oxidation, this pre-connected SiO 2 phase combined with B 2 O 3 and SiO 2 generated by the oxidation of ZrB 2 and SiC, respectively, to promote the rapid formation and subsequent replenishment of a borosilicate glass network, while dispersed ZrO 2 and ZrSiO 4 helped preserve the continuity and structural stability of the resulting oxide scale. At 1973 K, this structure reduced the maximum mass gain to 0.62 × 10 −2  g·cm −2 , about 69% lower than that of the SiO 2 -free ZrB 2 -SiC system, and decreased the initial oxygen permeability by 83.23%, with the protection efficiency ultimately reaching 99.82%. This work provides an interface pre-encapsulation route for constructing continuous oxygen-barrier networks in ultra-high-temperature ceramic coatings.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2026 · IF 6.1

A lyophilized CHA–lateral flow platform for point-of-care detection of miR-106b-5p from L1CAM-Immunocaptured small extracellular vesicles in Alzheimer's disease

Ran Xu,Hao Chen,Chao Zhao,Xiqing Ding

The early, non-invasive diagnosis of Alzheimer's disease (AD) remains a significant clinical challenge. MicroRNAs carried by L1CAM-immunocaptured small extracellular vesicles (sEVs) in blood, particularly miR-106b-5p, have emerged as promising candidate biomarkers for AD. However, their detection requires methods that are sensitive, specific, stable, and suitable for point-of-care (POC) applications. Catalytic hairpin assembly (CHA) combined with lateral flow immunoassay (LFIA) offers a potential POC solution, but its practical application is limited by high background leakage caused by “DNA breathing” and poor probe stability. Herein, we propose an integrated POC platform that combines immunomagnetic enrichment of L1CAM-positive sEVs with a novel “Fold-Adsorb-Block-Immobilize-Lyophilize” (FABIL) process for CHA probe stabilization. The FABIL process utilizes magnetic graphene oxide (MGO) to adsorb and physically separate hairpin probes (H1 and H2), thereby suppressing nonspecific hybridization and generating lyophilized CHA microspheres with room-temperature stability. When integrated into a lateral flow test strip, the FABIL-NE-miR platform achieves a visual detection limit of 10 fM and a liquid-phase limit of detection of 1.14 fM, overcoming the traditional trade-off between low background and high sensitivity. Clinical validation using 100 serum samples, including 32 AD cases and 68 non-AD controls, demonstrated that FABIL-NE-miR outperformed traditional low-background CHA systems, with an area under the ROC curve (AUC) of 0.9563, a sensitivity of 90.63%, and a specificity of 94.12%. Overall, the FABIL-NE-miR platform enables rapid visual detection of low-abundance AD-associated miRNAs from L1CAM-immunocaptured sEV fractions. By addressing key challenges such as background leakage and probe instability, this study provides a practical tool for AD screening and supports the feasibility of the FABIL strategy as a universal platform for next-generation nucleic acid diagnostics.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CANCER RESEARCH AND CLINICAL ONCOLOGY · 2026 · IF 3.3

Timosaponin AIII-based liposomes loaded with Auranofin for the induction of ferroptosis in anaplastic thyroid carcinoma

Deng Xinyi,Yang Lei,Li Dihua,Wang Yan,Jia Qiang,Li Ning,Meng Zhaowei

Purpose: Anaplastic thyroid carcinoma (ATC) is an exceptionally aggressive malignancy that, despite accounting for only 1%-1.5% of all thyroid cancers, is responsible for over half of thyroid cancer-related deaths. Characterized by limited treatment options and a poor prognosis, ATC presents a critical clinical challenge. In this study, we developed and evaluated an innovative liposomal system (T-AUF-LPs) co-loading Auranofin (AUF) and Timosaponin AIII (TAIII) aimed at inducing ferroptosis in ATC cells. Methods: T-AUF-LPs were prepared via the film-hydration method and their physicochemical properties were characterized. Cellular uptake, anti-proliferative effects, and ferroptosis-related mechanisms—including reactive oxygen species (ROS), iron levels, glutathione (GSH), GPX4, ACSL4, and NCOA4—were assessed in CAL-62 and 8505C ATC cell lines. In vivo antitumor efficacy and biosafety were evaluated using a BALB/c nude mouse xenograft model. Results: T-AUF-LPs showed superior physicochemical properties compared to conventional liposomes, including uniform spherical morphology, reduced particle size, and enhanced encapsulation efficiency. Cellular assays revealed significantly improved uptake of T-AUF-LPs in both ATC cell lines. The formulation inhibited cell proliferation in a dose-dependent manner, an effect effectively reversed by ferrostatin-1, confirming ferroptosis as the primary cell death mechanism. Mechanistic investigations indicated that T-AUF-LPs treatment increased intracellular ROS and iron levels, depleted GSH, and induced upregulation of ACSL4 and NCOA4 along with downregulation of GPX4. In vivo evaluation demonstrated effective tumor growth suppression with an excellent safety profile and no significant organ toxicity. Conclusion: T-AUF-LPs exert potent anti-tumor effects by inducing ferroptosis without causing systemic organ toxicity. They represent a promising therapeutic strategy for ATC, thereby addressing a critical unmet need in the management of this disease.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Flexible Pressure Sensor With Micro-Protrusion Structure via Water-Assisted Electrospinning for Biological Signal Acquisition and Photothermal Therapy

Xinxin Zhao,Yige Wang,Yi Zhao,Yajie Zhang,Xiangnan Wang,Kangkang Zhou,Wei Zhai,Kun Dai,Chuntai Liu,Changyu Shen

Flexible pressure sensors, featuring high sensitivity, strong skin adhesion, and excellent integrability, are increasingly sought in applications such as wearable health detection, human-machine interaction, and smart home systems. Engineering surface micro/nano structure within conductive polymer composites has proven to be an effective route to achieve high-performance flexible sensors. However, conventional processing methods for surface micro/nano structures, such as photolithography and three-dimensional (3D) printing, always suffer from high cost and complex process steps. Herein, a thermoplastic polyurethane (TPU)/ethyl cellulose (EC) nanofiber membrane (TENM) with micro-protrusion structure is fabricated through a facile, one-step water-assisted electrospinning process. A high-performance flexible pressure sensor is subsequently constructed via screen printing, drop coating, and face-to-face assembly techniques. This resulting pressure sensor demonstrates comprehensive pressure sensing performances, including high sensitivity (up to 37.5 kPa −1 ), a wide working range (250 kPa), short response/recovery time (25/25 ms), as well as satisfactory long-term stability (20 kPa for 1000 cycles). Benefiting from these good performances, the sensor enables full-range human physiological signal acquisition, two-dimensional (2D) planar pressure mapping, and robotic hand control. Furthermore, the MXene-based pressure-sensitive layer exhibits remarkable photothermal conversion efficiency, reaching 80°C within 80 s under 100 mW/cm 2 irradiation, highlighting the potential of this device for intelligent photothermal therapy applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Micromachines · 2026 ·Vol. 17 ·期 7 ·839 · IF 3.5

A Self-Centering, Blade-Assisted, Electrowetting-Enabled Strategy for Precise Droplet Splitting on Open Digital Microfluidic Platforms

Hao Liang,Liang Chen,Haifeng Zhang,Xiaowei Liu

Droplet splitting technology on open digital microfluidic platforms still faces significant challenges in terms of process complexity, the degree of automation, and operating conditions, which hinder its further development. This study proposes a fully automated method for precise droplet splitting based on printed circuit boards with open-coplanar asymmetric electrodes and a slippery liquid-infused porous surface. This method uses simple square electrodes arranged in a 3 × 5 array, combined with low-adhesion blade-assisted cutting and electrowetting-on-dielectric to drive droplet splitting, enabling accurate, stable, and repeatable automated droplet splitting on an open digital microfluidic platform. It has the advantages of a simple method, easy maintenance and integration, and high automation. This study systematically investigated the effects of droplet volume, applied voltage, blade thickness, cutting speed, and electrode shape on droplet splitting performance. We developed an active droplet position calibration method based on a simple 3 × 3 square electrode array combined with an enveloping voltage configuration strategy. For droplets with a volume of 10 μL, the positioning error can be controlled to within 0.06 mm, representing a reduction of more than 95% compared to the conventional EWOD free drive method. The experimental results show that to achieve stable and approximately equal-volume droplet splitting, the cutting speed needs to exceed the critical value related to the blade thickness. Among the square, zigzag, and hexagonal electrode shapes tested, the square electrode required the lowest splitting voltage. When the blade thickness is 0.3 mm, the droplets can be successfully split at a minimum voltage of 165 V. After increasing the splitting voltage to 400 V, the droplet splitting time was reduced from 5.57 s to 0.27 s, with a reduction of 95.2%, which significantly improves droplet splitting efficiency. This method provides a practical, stable, automated, and precise droplet splitting method for sample preparation, biochemical reactions, and portable droplet analysis systems.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2026 · IF 9.2

The effects of biomimetic carrier and nano-sized Fe2O3 on biogas production from food waste: performance and mechanisms

Jingjing Guo,Yanfang Lan,Tongtong Wu,Juan Wang,Yuejin Zhang,Chen Sun,Weixing Cao

To enhance biogas production from food waste (FW) via anaerobic digestion (AD), batch experiments were conducted at 36.5 ± 0.5°C using Fe 2 O 3 nanoparticles (Fe 2 O 3 NPs), 3D-printed reticulated rumen biomimetic carrier (BC), and Fe 2 O 3 NPs loaded on BC (Fe 2 O 3 NPs@BC). Results demonstrated that all additives significantly enhanced AD performance, along with the Fe 2 O 3 NPs achieved the highest cumulative methane yield of 378.7 mL/g VS, representing a 24.8% increase relative to the Control group. The additives may act as electron shuttles via Fe 3+ /Fe 2+ cycling and appear to enhance electron transport system activity and system stability. Microbial analysis showed the additives increased methanogenic archaeal diversity. The dominant bacterial phyla were Firmicutes (31%∼38%) and Bacteroidota (31%∼51%), and Fe 2 O 3 NPs increased Bacteroidota by 65.0% compared with the Control. Methanobacterium and Methanosaeta dominated methanogens and drove hydrogenotrophic and acetoclastic methanogenesis. This study reveals mechanistic insights into nanomaterial-biocarrier interactions in food waste energy conversion.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。