DESALINATION
·
2023
·
IF 9.9
Xudong Bu,Yurong Zhang,Haiqing Guo,Sheng Wang,Xueyan Du
The ion removal capacity of carbon based capacitive deionization (CDI) is limited by the double-layer mechanism. Replacing one electrode of the conventional carbon-based symmetric CDI with a battery-like ion insertion material to obtain hybrid capacitive deionization (HCDI) can significantly improve the adsorption capacity . Various ion insertion materials have been adopted for HCDI, however, how to optimize the performance of the HCDI system by matching the two electrodes with different ions removal mechanism remains challenging. In this work, a HCDI desalination cell was demonstrated by using NaTi 2 (PO 4 ) 3 /reduced graphene oxide composites (NTP-rGO-700) as the cathode and activated carbon (AC) as the anode. Based on the mass balance strategy of electrodes and the electrochemical behavior of hybrid capacitors with different AC:NTP-rGO-700 mass ratios, the HCDI desalination cell was assembled with the optimal AC:NTP-rGO-700 mass ratio of 2:1. At an operating voltage of 1.6 V and a current density of 125 mA·g −1 , the specific adsorption capacity (SAC) of the HCDI cell can reach 51 mg·g −1 with an average salt adsorption rate (ASAR) of 2 mg·g −1 ·min −1 , and the energy consumption (E m ) is 136.53 kJ·mol −1 . This work provides an efficient approach for developing high performance HCDI cell.
研究领域:
环境科学
·
电化学
·
材料科学
·
水处理技术
·
能源存储
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Chang Chen,Kwok-ho Lam,Bao-jun Liu,Xian-hua Hou,Yu-ping Wu
Chemically integrated hybrid quantum dots ZnCo 2 O 4 /reduced graphene oxide (QDs ZCO/rGO) sheets nanocomposites are synthesized through polyol processes. rGO sheets grow and interweave to form basic skeletons. Ultrafine ZCO particles with a size of around 3.66 nm grow and embed on both sides of the rGO sheets, and the rGO sheets restrain the reunion of ZCO nanoparticles . The existence of rGO sheets and ZCO nanoparticles can engender the mutual synergistic effects so that hybrid QDs ZCO/rGO electrodes exhibit the excellent electrochemical properties . Owing to this special nanoparticles-on-sheets structure, the hybrid QDs ZCO/rGO electrodes exhibit an excellent initial discharge capacity for rechargeable lithium-ion batteries (1325.9 mAh g −1 at the current density of 200 mA g −1 ), high rate stability (532.3/566.1 mAh g −1 at 4000 mA g −1 ) and outstanding electrochemical cyclic stability (657.6/668.2 mAh g −1 at 2000 mA g −1 after 2000 cycles with a capacity retention of 68.6%). For full-cells, high initial reversible discharging capacity (646 mAh g −1 at 200 mA g −1 ) and good cyclic stability (514 mAh g −1 at 200 mA g −1 after 100 cycles) are obtained. The superior performance of the as-prepared electrodes is ascribed to the advantage of nano-sized particles. With the successful synthesis of hybrid QDs ZCO/rGO nanocomposites, the facile synthetic route and unique growth of nanostructuring method can be extended to high electrochemical performance electrodes for commercial lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
·
先进电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2017
·
IF 6.395
Xiubo Xie,Ming Chen,Peng Liu,Jiaxiang Shang,Tong Liu
Nickel sulfides decorated reduced graphene oxide (rGO) has been produced by co-reducing Ni 2+ and graphene oxide (GO), and is subsequently ball milled with Mg nanoparticles (NPs) produced by hydrogen plasma metal reaction (HPMR). The nickel sulfides of about 800 nm completely in situ change to MgS, Mg 2 Ni and Ni multiple catalysts after first hydrogenation/dehydrogenation process at 673 K. The Mg-5wt%NiS/rGO nanocomposite shows the highest hydrogen desorption kinetics and capacity properties, and the catalytic effect order of the additives is NiS/rGO, NiS and rGO. At 573 K, the Mg-NiS/rGO nanocomposite can quickly desorb 3.7 wt% H 2 in 10 min and 4.5 wt% H 2 in 60 min. The apparent hydrogen absorption and desorption activation energies of the Mg-5wt%NiS/rGO nanocomposite are decreased to 44.47 and 63.02 kJ mol −1 , smaller than those of the Mg-5wt%rGO and Mg-5wt%NiS samples. The best hydrogen desorption properties of the Mg-5wt%NiS/rGO nanocomposite can be explained by the synergistic catalytic effects of the highly dispersed MgS, Mg 2 Ni and Ni catalysts on the rGO sheets, and the more nucleation sites between the catalysts, rGO sheets and Mg matrix.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
催化化学
·
储氢材料
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2018
·
IF 4.514
Yuxin He,Qiuyu Chen,Song Yang,Chang Lu,Mengting Feng,Yuanli Jiang,Guoxi Cao,Jianping Zhang,Chuntai Liu
The epoxy nanocomposites with Fe 3 O 4 modified graphene oxide (Fe 3 O 4 /GO) were used to influence the micro-cracks resistance of carbon fiber reinforced epoxy (CF/EP) laminate at 77 K. Fe 3 O 4 /GO with good paramagnetic properties were prepared by co-precipitation method and used to modify epoxy for cryogenic applications. Fe 3 O 4 /GO modified CF/EP laminates were also prepared through vacuum-assisted resin transfer molding (VARTM). The results show that the Fe 3 O 4 /GO can effectively improve the mechanical properties of epoxy (EP) matrix at 77 K and reduce the coefficient of thermal expansion (CTE) of EP matrix. It also can obviously improve the micro-cracks resistance of CF/EP composites at 77 K. Compared to neat EP, the CTE of Fe 3 O 4 /GO modified EP composite is decreased 51.6%. Compared to CF/EP composite, the micro-cracks density of Fe 3 O 4 /GO modified CF/EP composite at 77 K is decreased 60.0%.
研究领域:
材料科学
·
高分子复合材料
·
低温工程
·
纳米复合材料
·
力学性能
✓ 已验证
DOI
高影响因子
Analytical Methods
·
2016
·Vol. 8
·期 24
·4926-4933
·
IF 1.915
Dejiang Rao,Qinglin Sheng,Jianbin Zheng
Herein, we report a simple and attractive self-assembly strategy for preparing graphene oxide–multiwalled carbon nanotube–(1-pyrenemethylamine)–gold (GO–MWCNT–PMA–Au) nanocomposites using 1-pyrenemethylamine (PMA) as a coupling agent. The morphology and composition of the nanocomposites were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS). Further, a non-enzymatic nitrite sensor was fabricated by immobilizing GO–MWCNT–PMA–Au nanocomposites on a glassy carbon electrode (GCE). To obtain the optimal electrochemical experimental conditions, the effects of pH value and the volume of the as-prepared Au nanoparticle suspension were carefully investigated. Its electrochemical sensing properties were studied by cyclic voltammetry and differential pulse voltammetry. The electrochemical investigation showed that the GO–MWCNT–PMA–Au nanocomposites exhibited good catalytic performance for the oxidation of nitrite. The nitrite electrochemical sensor presented a wide linear range from 2.0 × 10−6 to 1.0 × 10−2 mol L−1, a high sensitivity of 483.51 μA mM−1 cm−2 and a low detection limit of 0.67 μmol L−1 at a signal-to-noise ratio of 3 (S/N = 3). It also exhibited good anti-interference capability and stability. This paper provides a self-assembly strategy for preparing nanocomposites which are used to construct improved electrochemical sensors.
研究领域:
分析化学
·
纳米生物技术
·
电化学传感
·
环境监测
·
食品安全
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2015
·
IF 4.321
Zhenzhen Yang,Renliang Huang,Wei Qi,Liping Tong,Rongxin Su,Zhimin He
Reduced graphene oxide functionalized with magnetic Fe 3 O 4 nanoparticles and –PhSO 3 H groups (Fe 3 O 4 -RGO-SO 3 H) was reported for environmentally benign hydrolysis of cellulosic materials, which is an important process in integrated utilization of biomass resource. Except for –PhSO 3 H groups, –COOH and –OH groups derived from graphene oxide (GO) were also expected in the structure of Fe 3 O 4 -RGO-SO 3 H. Fe 3 O 4 -RGO-SO 3 H exhibited outstanding catalytic performance for the hydrolysis of cellulosic materials, due to its crumpling feature with clear layers and the coexistence of –COOH and –OH groups. The unique structure of Fe 3 O 4 -RGO-SO 3 H favors the accessibility of cellulose to the active sites of the material and facilitates the diffusion of the product molecules. –COOH groups on the surface of the material provide a large concentration of acidic functionality for hydrolyzing cellulose, while –OH groups readily adsorb cellulose through forming strong hydrogen bonds between –OH groups and the oxygen atoms in β-1,4 glycosidic bonds. Furthermore, Fe 3 O 4 -RGO-SO 3 H can also be easily separated from the reaction residue with an extra magnetic force and further used at least five times.
研究领域:
材料化学
·
催化化学
·
生物质能源
·
绿色化学
·
纳米材料科学
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2020
·
IF 5.778
Kexin Chen,Xi Wang,Pengfei Xia,Jinxin Xie,Jing Wang,Xukai Li,Yiming Tang,Laisheng Li
Z-scheme Cu 2 O-(rGO-TiO 2 ) photocatalyst was successfully synthesized via a simple three-step approach for 2,2′,4,4′-tretrabromodiphenyl ether (BDE47) reductive removal under simulated solar irradiation. Unlike the traditional heterojunction , the addition of reduced graphene oxide (rGO) enhanced the redox ability of Cu 2 O-TiO 2 by increasing charge transfer. When modifying Cu 2 O films by adding 1% rGO and coating with 70% TiO 2 , the resulting Cu 2 O-(rGO-TiO 2 ) exhibited the best photocatalytic activity for BDE47 removal. The charge transfers of Cu 2 O-(rGO-TiO 2 ) were proven to follow a Z-scheme pathway through the electron paramagnetic resonance analysis. The degradation pathways of BDE47 were elucidated by identifying intermediate products via gas chromatography-mass spectrometry (GC-MS) and gas chromatography (GC). Photo-electrons (e − ) generated from the conduction band of Cu 2 O and hydrogen protons (H 0 ) reduced from H + in water were the main contributing elements for the removal of BDE47, which response to the ortho and para debromination . Ortho-Br of BDE47 was attacked by e − and BDE28 was the dominant debromination product on the first stage. Then e − and H 0 attacked ortho-Br and para-Br of BDE28 to form BDE15 and BDE8, respectively. The concentration of BDE8 was higher than that of BDE15, suggesting that H 0 played the most important role on the second debromination stage. An effective Cu 2 O-(rGO-TiO 2 )-based Z-scheme system for BDE47 debromination was proposed in this study, which may contribute to the development of novel green technologies.
研究领域:
环境科学
·
光催化化学
·
环境污染与控制
·
材料科学
·
绿色技术
·
有机污染物降解
✓ 已验证
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2019
·
IF 6.864
Chao Liu,Yufei Dong,Yang Lin,Hongxia Yan,Wenbo Zhang,Yan Bao,Jianzhong Ma
In order to simultaneously improve the dispersibility of graphene in the bismaleimide (BMI) resin and the interfacial interaction between them, the polytriazine@RGO nanocomposite (PTZ@RGO) with terminal amine was obtained by the method of one-step precipitation polymerization. The PTZ@RGO hybrid nanocomposite was then chosen as filler to improve the mechanical and tribological properties of BMI resin. Through effective surface modification, the compatibility and interface strength between graphene and BMI matrix were significantly improved, leading to the flexural strength , impact strength , anti-friction, wear resistance and thermal stability of PTZ@RGO/BMI composites were significantly improved as compared to those of neat BMI resin and RGO/BMI composites. The other properties including hardness and thermal properties of composites were all improved with increasing amount of PTZ@RGO fillers. These high performance BMI composites have a great potential for application in aerospace, mechanical engineering and other automobile brake devices.
研究领域:
材料科学
·
高分子复合材料
·
表面工程
·
摩擦学
·
航空航天材料
✓ 已验证
DOI
高影响因子
IONICS
·
2016
·Vol. 22
·期 11
·2225-2233
·
IF 2.119
Lu Juanjuan,Liu Yuelin,Liu Xinhe,Lu Xiaoquan,Liu Xiuhui
In this article, we constructed an electrochemical sensor for highly sensitive determination of β-nicotinamide adenine dinucleotide (NADH) using the poly(diallyldimethylammonium chloride)-functionalized reduced graphene oxide nanocomposite modified electrode (PDDA-rGO/GCE). The nanocomposite was characterized by transmission electron microscopy, Fourier transform-infrared spectrometry, ultraviolet-visible absorption spectrometry, cyclic voltammetry, and electrochemical impedance spectroscopy. The experimental results demonstrated that the fabricated sensor exhibited excellent electrocatalytic activity on the oxidation of NADH with a decreased about 200 mV in overpotential and 5.0-fold increment in the oxidation peak current compared to a bare GCE. Applying cyclic voltammetry, a wide linear range from 1.0 × 10 −7 to 2.9 × 10 −3 M with low limit of detection (LOD) of 3.4 × 10 −8 M and high sensitivity of 463.3 μA mM −1 cm −2 were obtained, which was superior to other NADH electrochemical sensors reported previously. Furthermore, the fabricated NADH sensor possessed excellent selectivity, reproducibility, and stability. The oxidation mechanism of NADH at the PDDA-rGO/GCE was also discussed in detail.
A simple NADH sensing platform based on PDDA-rGO composite is constructed, which exhibits an ultra-low detection limit ( 3.4×10-8 M) towards the oxidation of NADH, and the electrochemical reaction mechanism of NADH is discussed in detail.
研究领域:
生物电化学
·
生物传感器
·
纳米生物技术
·
分子诊断
·
转化医学
·
电分析化学
✓ 已验证
DOI
高影响因子
Carbon Neutralization
·
2023
·Vol. 2
·期 6
·738-745
·
IF 0
Dabei Wu,Joseph Nzabahimana,Xianluo Hu
The development of organic lithium batteries (OLBs) offers a promising opportunity for the advancement of green and sustainable energy storage systems. However, organic cathode materials face challenges in terms of conductivity, electrochemical activity, and dissolution. Here, we address these limitations by introducing a sulfur-linked carbonyl compound called poly(dichlorobenzoquinone sulfide) (PDBS), which is polymerized in situ on reduced graphene oxide by a mixed solvent thermal method. The resulting carbonyl compound electrode materials exhibit favorable properties as organic cathode materials for OLBs. After 4000 cycles at a current density of 1000 mA g −1 , the carbonyl compound electrodes exhibit a discharge capacity of 102 mAh g −1 . This remarkable performance indicates excellent stability and long cycle life, which are crucial for practical applications. These results suggest that PDBS, a designable sulfur-linked carbonyl compound, holds great promise as an effective organic cathode material for OLBs. In addition, this work provides valuable insights into improving the electrochemical performance of organic cathode materials.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米复合材料
·
有机电极材料
✓ 已验证
DOI
Journal of Materials Chemistry A
·
2015
·Vol. 3
·期 43
·21569-21577
·
IF 7.443
Zhaoqiang Li,Longwei Yin
A sandwich-like structure with reduced graphene oxide (RGO) wrapped MOF-derived ZnCo2O4–ZnO–C polyhedrons on nickel foam as an anode for high performance lithium ion batteries (LIBs) is for the first time reported via simply growing MOFs on Ni foam, and wrapping graphene oxide nanosheets on MOFs, and then annealing under a N2 atmosphere. It should be noted that the MOF-derived porous products are composed of carbon-coated spinel ZnCo2O4–ZnO nanoparticle polyhedrons. When tested as anodes for LIBs, the unique RGO/ZnCo2O4–ZnO–C/Ni sandwich-structured LIB anodes exhibit superior coulombic efficiency, excellent cycling stability and rate capability. The in situ formed carbon layers outside the ZnCo2O4–ZnO act as not only a conductive substrate but also a buffer layer for volume changes. The open pores in ZnCo2O4–ZnO–C polyhedrons provide sufficient electrolyte as well as serve as cushion space to further alleviate volume changes. The RGO nanosheets act as a flexible protector to firmly fix polyhedrons on the Ni foam, as well as a conductive substrate to wire up all the polyhedrons. The interconnected carbon layers and two high conductive substrates (RGO and Ni foam) together form an unhindered highway for charge transfer during discharge/charge processes, promising good electrochemical performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
固态化学
·
电极工程
✓ 已验证
DOI
高影响因子
CHROMATOGRAPHIA
·
2018
·Vol. 82
·期 3
·683-693
·
IF 1.401
Shen Chen,Wu Tong,Zang Xiaohuan
In this work, a zeolitic imidazolate framework-based graphene oxide composite (ZIF-8@GO) was prepared and used as the adsorbent in hollow fiber stir bar sorptive extraction. The stir bar was constructed of a small section of hollow fiber filled with 5 mg ZIF-8@GO and a thin stainless wire of 1.5 cm long in its lumen, and used to extract the trace levels of phthalate esters from children’s food samples prior to gas chromatography–mass spectrometric detection. The ZIF-8@GO showed a high adsorption efficiency for the compounds containing aromatic rings. The main experimental parameters that can impact the extraction efficiency including extraction temperature, extraction time, stirring rate, sample salinity, and desorption conditions were investigated. Under the optimized conditions, the limits of detection (LODs) for the five phthalate esters (diethyl phthalate, dipropyl phthalate, diisobutyl phthalate, butylbenzyl phthalate, and di(2-ethylhexyl) phthalate) were 0.15–0.6 µg L −1 for CiCi beverage and pear juice samples, and 0.75–2.2 µg kg −1 for jam samples. The limits of quantitation (LOQs) were 0.5–2.0 µg L −1 for CiCi beverage and pear juice samples, and 2.5–7.5 µg kg −1 for jam samples. Wide linear ranges of 0.5–500.0 µg L −1 and 2.5–2000 µg kg −1 were obtained for CiCi beverage, pear juice samples and jam samples, respectively, with good repeatability (RSD < 11%) and high method recoveries (72%–100%). The lifetime test results showed that the ZIF-8@GO-based hollow fiber stir bar can be reused for 120 extraction cycles without a significant loss of extraction efficiency, indicating its high durability and stability. The established method was applied successfully for the determination of the phthalate esters (PAEs) in children’s food samples. Graphical abstract
研究领域:
分析化学
·
食品安全
·
环境毒理学
·
暴露科学
·
食品化学
·
污染物检测
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）