Materials Today Physics
·
2021
·
IF 9.298
C. Li,S. Ma,W. Cui,X. Sang,P. Wei,W. Zhu,X. Nie,W. Zhao,Q. Zhang
Seeking novel and effective approaches to synergistically improve the electrical and thermal transport properties and electro-thermal conversion efficiency of Bi 2 Te 3 -based alloys is essential for commercial applications. Here, GdCo 2 /Bi 0.37 Sb 1.63 Te 3 thermoelectric nanocomposites were designed and synthesized to achieve synergistic improvement of electrical and thermal properties . As confirmed by magnetoresistance measurement, the built-in magnetic field and magnetic scattering generated by magnetic nanoparticles decrease the carrier concentration and mobility, and increase the Seebeck coefficient . Meanwhile, GdCo 2 nanoparticles lead to broad-frequency phonon scattering, which effectively reduces the lattice thermal conductivity of nanocomposites. Eventually, the average ZT of the nanocomposite is increased by 18% in the range of 300–500 K, and the cooling temperature difference is increased by 68% near room temperature. This work proves that the thermoelectromagnetic coupling effects generated by magnetic particles can effectively improve the electro-thermal conversion performance.
研究领域:
材料科学
·
凝聚态物理
·
热电材料
·
纳米科技
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2022
·
IF 4.171
Zhaoping Chen,Qin Wang,Ziyao He,Jiaming Li,Enrou Mei,Xiaojuan Liang,Weidong Xiang
CsPbX 3 (X = Cl, Br, I) perovskites have emerged as promising candidate lasing materials due to their high optical gain , low defect state density, and high absorption coefficient. Unfortunately, they suffer from poor stability, particularly with respect to temperature, moisture, and light exposure, preventing their use in practical optoelectronic applications , such as for amplified spontaneous emission (ASE) with an ultralow laser threshold. Herein, CsPbBr 3 @MCM-41 molecular sieve (CMM) composites are controllably prepared by different ultrasonication and stirring treatments. In addition, different perovskite concentrations and heat-treatment conditions are also considered to demonstrate the ASE behaviors. In addition, CMM@PS (CMMP) and CMM@AB (CMMA) composites were fabricated successfully by further optimizing the mixing ratio of CMM and the polymer. More excitingly, the stability of the CMM@polymer films with respect to the external environment is greatly improved after the polymer coating . To our surprise, the CMM@ploymer thin films demonstrated ASE at room-temperature, with an ASE threshold as low as 0.136 mJ/cm 2 and 0.049 mJ/cm 2 for CMMA and CMMP, respectively. These results clearly shed light upon the control and optimization of CsPbBr 3 perovskite composite films , paving the way for their widespread use in optoelectronic applications .
研究领域:
光学材料
·
纳米复合材料
·
光电子学
·
激光物理
·
功能薄膜
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2019
·Vol. 26
·期 31
·32345-32359
·
IF 2.914
Yu Binglong,Wang Jie,Yang Xiaoxin,Wang Wenlong,Cai Xiulan
In this paper, we synthesized a polyglycerol(PG)-mediated superparamagnetic graphene oxide nanocomposite called MGON, consisting of PG-modified superparamagnetic iron oxide nanoparticles (SPION) covalently bonded to PG-functionalized graphene oxide (GO). MGON exhibits better dispersibility and colloidal stability in aqueous solution than the magnetic graphene oxide reported in the literature. The physicochemical properties of MGON were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and UV-vis spectroscopy. Applied to the adsorption of tetracycline (TC) in aqueous solution as an adsorbent, the MGON showed excellent adsorption performance with the maximum adsorption capacity of 684.93 mg/g at 298 K. Adsorption kinetics and isotherm results indicate that the adsorption process conforms to the pseudo-second-order kinetics and Langmuir isotherm models. Adsorption thermodynamics has confirmed that the adsorption process of TC on MGON is spontaneous and endothermic. With the increase of temperature, the adsorption capacity of MGON increases continuously, and the adsorption capacity of MGON is the largest when the pH value is 7. Furthermore, the π-π and cation-π interaction, amidation reaction, and hydrogen bonding can be used to explain the adsorption mechanism of TC on MGON. Desorption and regeneration experiments showed that MGON still had 67.65% regenerative performance after five cycles. Hence, MGON is a promising adsorbent in the removal of tetracycline from wastewater.
研究领域:
环境科学
·
纳米材料学
·
污染物吸附
·
水污染治理
·
环境功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Xiaoxiao Zhang,Qingting Liu,Lei Xia,Dongyang Huang,Xudong Fu,Rong Zhang,Shengfei Hu,Feng Zhao,Xiao Li,Xujin Bao
To broaden the operating temperature range of phosphoric acid (PA) doped polybenzimidazole membrane-based proton exchange membrane fuel cells (PEMFCs) toward low temperatures, a novel series of poly(2,5-benzimidazole) (ABPBI)/sulfonated sepiolite (S-Sep) composite membranes (ABPBI/S-Sep) with low PA doping levels (DLs) were prepared via in-situ synthesis. The desirably enhanced mechanical, thermal, and oxidative stabilities of ABPBI/S-Sep composite membranes were achieved by constructing ABPBI chains arranged along the sepiolite (Sep) fibers and acid-base crosslinks formed between S-Sep fibrous particles and ABPBI chains. Benefiting from the richness of high temperature stable bound water and the excellent water absorbability of Sep particles that enable the formation of additive proton conducting paths, the composite membranes retained bounded PA and achieved much higher proton conductivities under both anhydrous and hydrous conditions compared to PA-doped ABPBI membranes. Proton conductivity values above 0.01 S/cm at 40–90 °C/20–98% RH conditions and 90–180 °C/anhydrous conditions as well as peak power density of 0.13 and 0.23 W/cm 2 at 80 and 180 °C with 0% RH, respectively from the ABPBI/2S-Sep composite membrane are more holistic compared to Nafion at low temperatures and polybenzimidazole-based membranes at high temperatures, respectively. The excellent properties of ABPBI/S-Sep composite membranes suggest them as prospective candidates for PEMFCs applications in a wide temperature range.
研究领域:
材料科学
·
能源科学
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE IONICS
·
2017
·
IF 2.354
Leyu Zhan,Yao Zhang,Xiangyang Zhuang,Hui Fang,Yunfeng Zhu,Xinli Guo,Jian Chen,Zengmei Wang,Liquan Li
The x LiBH 4 -Li 3 N ( x = 1, 2, 4) composites were investigated on their lithium ionic conductivities . They maintained the original phase structures of orthorhombic LiBH 4 and hexagonal β-Li 3 N during ball milling according to the analyses by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Electrochemical impedance spectra (EIS) tests showed that LiBH 4 -Li 3 N composites lift the lithium ionic conductivities from that of bulk LiBH 4 by nearly 100 times at low temperature. LiBH 4 -Li 3 N offers 1.06 × 10 − 5 S cm − 1 of conductivity while bulk LiBH 4 possesses only 2.05 × 10 − 7 S cm − 1 at 323 K. Cyclic voltammetry (CV) tests indicated that the voltage window of composites could attain 3 V, which is much more stable than Li 3 N (< 1 V). No thermodynamic incident appears in DSC curves except for the orthorhombic-hexagonal transition endothermic peak of LiBH 4 in the x LiBH 4 -Li 3 N composites. It confirms the phases stabilities of the x LiBH 4 -Li 3 N ( x = 1, 2, 4) composites before and after CV tests. In-situ solid state Nuclear Magnetic Resonance (NMR) tests on LiBH 4 -Li 3 N illustrated that the high conductivity in low temperature should not come from high-temperature phase of LiBH 4 . Therefore, the enhancement of lithium ionic mobility of the composite might be attributed to both Li 3 N and the interfaces between small crystallites where transmission electron microscope (TEM) morphology showed the appearance of amorphous grain boundary.
研究领域:
材料科学
·
固态离子学
·
能源化学
·
电化学
·
纳米材料
·
固体电解质
·
锂离子电池
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2022
·
IF 4.598
Dexi Liu,Shichang Xu,Yanmeng Cai,Yue Wang,Jiaqi Guo,Youlin Li
The conventional separation technologies, like chemical precipitation and adsorption processes, cannot quickly and selectively separate and recycle heavy metal ions from waste. Due to its rich sulfur content and excellent electrical conductivity, vanadium disulfide is a potential material for effectively removing lead from wastewater. The vanadium disulfide material with selective adsorption ability was introduced into CDI technology to construct a coupling technology with both advantages. The N -doped modified ZIF@vanadium disulfide (ZAC@VS 2 ) composites were successfully synthesized by hydrothermal method. Electrosorption experiments show that ZAC@VS 2 material presents the remarkable saturated adsorption capacity to lead(II) ions (239.52 mg/g) in the 500 mg/L PbCl 2 solution. In the triplex blend system (Fe 3+ /Pb 2+ /Na + ) with each solute density of 100 mg/L, the saturated adsorption efficiency of 85.4% to Pb 2+ can still be maintained. In addition, compared with the Langmuir(R 2 =0.873) adsorption isotherm model, the Freundlich model (R 2 =0.922) can be better used to fit the adsorption process, which proves that the adsorption process is multilayered and heterogeneous. XPS tests and competitive adsorption experiments show that the electric double layer (EDL) and complexation together promote the selective adsorption of heavy metal ions by ZAC@VS 2 . ZAC@VS 2 composite electrode shows excellent performance in the removal of lead ions in battery waste liquid, indicating the potential of introducing ZAC@VS 2 into CDI to remove lead ions.
研究领域:
环境科学
·
材料科学
·
水处理技术
·
重金属污染控制
·
电化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Jiaxu Cheng,Jinghan Qiao,Zongyang Yang,Bowen Zhu,Jianguo Duan,Ding Wang,Rui Huang,Yingjie Zhang,Zhongren Zhou,Peng Dong
One of the key efficient strategies to optimize the silicon micro-structure and to improve the lithium-storage electrochemical performance is to introduce the metallic phase into silicon matrix to realize the silicon-metal recombination as well as the nanocrystallization of silicon structure. The present research introduced metallic titanium to synthesis TiSi 2 /Si nanocomposites by the aid of electrolyzing SiO 2 /TiO 2 in molten salt. The reduced nanocomposites exhibited excellent lithiation stability with the initial discharging specific capacity of 2107 mA h/g and the first columbic efficiency of 89.96%. Particularly benefiting from the compositional TiSi 2 phase and the structural superiority of silicon nanowires surrounded by the alloyed nanoparticles , the as-obtained anode also delivered a high rate capacity. The major objective of this study is to establish the technology for molten salt electrolytic preparation of TiSi 2 /Si nanocomposites for lithium-ion batteries and further to offer solutions for modifying the silicon anode materials .
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机非金属材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2011
·Vol. 21
·期 18
·6569-6575
·
IF 5.101
Xintao Luo,Jishu Han,Yang Ning,Zhe Lin,Hao Zhang,Bai Yang
1-Thioglycerol (TG)-stabilized quantum dots (QDs) are good candidate for performing a stepwise polymerization reaction with polyurethane (PU) prepolymers, but their use is limited by their worse photoluminescence (PL) in comparison to QDs stabilized by other mercapto-ligands. To overcome this problem, TG-stabilized CdTe QDs with enhanced PL were synthesized in water through a N2H4-promoted growth approach. The current synthesis significantly shortened the duration of the size evolution of QDs, particularly for obtaining samples with orange and red emissions. It also permitted QD growth at low temperatures, such as room temperature, which avoided the decomposition of TG and subsequent embedment of sulfur into the QDs as occurs in the conventional synthesis. Most importantly, the TG ligand endowed the QDs with hydroxyl coverage, making the QDs miscible with PU prepolymers in dimethyl sulfoxide, and therefore overcoming the main problem in fabricating PU-based nanocomposites of eliminating water. The hydroxyl coverage further allowed for the linkage of PU on the surface of the QDs through the reaction between –OH and –NCO, producing CdTe QD–PU bulk nanocomposites. Systematic characterization indicated that the QDs were well dispersed in the PU medium, and the size-dependent PL of QDs was also maintained.
研究领域:
材料科学
·
纳米科技
·
高分子化学
·
光电子学
·
胶体与界面化学
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Dapeng Zhang,Zicheng Yao,Han Zhang,Guiru Zhu,Lu Liu,Congjie Gao
A novel strategy to fabricate thin film nanocomposite (TFN) membrane was reported by dispersing nanofillers in the aqueous and organic phase simultaneously via interfacial polymerization of m-phenylenediamine and trimesoyl chloride. Two different nanofillers (hydrophilic MCM-48 and hydrophobic ZIF-8) were used to investigate the new strategy. Both hydrophilic MCM-48 and hydrophobic ZIF-8 can effectively improve the separation performance of the TFN membrane with higher water flux value maintaining high salt rejection via the novel strategy than conventional TFN membrane prepared with same total amount nanoparticles in singly organic phase or aqueous phase. It indicates that the new strategy is feasible to obtain the TFN membrane with excellence separation performance compared with the conventional method by dispersing nanofillers in singly phase. The new strategy is realized by dispersing less amount nanofillers in both phases simultaneously, which is possible to avoid the aggregation of nanoparticles and maximize the effect of nanoparticles.
研究领域:
材料科学
·
膜分离技术
·
纳米复合材料
·
环境工程
·
化学工程
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2018
·
IF 3.23
Hongjing Wu,Shaohua Qu,Kejun Lin,Yuchang Qing,Liuding Wang,Yuancheng Fan,Quanhong Fu,Fuli Zhang
It has been rarely reported that the microwave absorption materials can exhibit excellent low-frequency EM wave absorbing properties. In this paper, we synthesized steady short carbon fibers (SCFs)@TiO 2 composites by using simple one-pot hydrothermal process. The conductive short carbon fibers could be separated by TiO 2 nanoparticles from each other and reduced the conductivity of composite materials as a whole, meeting the requirements of impedance matching . With the introduction of SCFs content, SCFs@TiO 2 composites showed improved tan δ E values at low frequencies, implying the enhanced microwave attenuation ability at low and medium frequency. We unexpectedly found that the SCFs@TiO 2 composites exhibited very strong absorbing peaks ( i.e. , −46.3 dB) at low frequencies with relatively thin matching thickness. Interestingly, when the thickness of the SCFs@TiO 2 composite was only 1.0 mm, the absorbing bandwidth with a RL value less than −10 dB was over 14.3–16.7 GHz ( i.e. , absorbing frequency bandwidth is 2.4 GHz).
研究领域:
材料科学
·
电磁功能材料
·
纳米复合材料
·
微波吸收材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Naseem Akhtar,Hongyuan Shao,Fei Ai,Yuepeng Guan,Qifan Peng,Hao Zhang,Weikun Wang,Anbang Wang,Bingyin Jiang,Yaqin Huang
Lithium-sulfur (Li-S) batteries with high specific capacity are expected to be a new generation of energy storage devices. However, the shuttle effect of lithium polysulfide makes it difficult to commercialize stable Li-S batteries. In this work, we designed a gelatin-polyethylenimine composite (GPC) as functional binder for Li-S batteries to improve the stability of electrode during discharge-charge process. GPC binder combines the dispersion and adhesion ability of gelatin, which keeps cathode homogeneous and stable during electrochemical reaction , and adsorption capability of PEI for polysulfide , which suppresses the “shuttling effect”. The result shows that GPC used as a binder remarkably enhanced cyclic performance of Li-S battery with good capacity retention of about 100% at current density of 1C (sulfur loading 1.5 mg cm −2 ) after 100 cycles. We believe that GPC would be a promising binder for highly stable Li-S batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米复合材料
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMISTRY
·
2013
·Vol. 31
·期 6
·745-751
·
IF 0.917
Yifei Wang,Daoyong Chen
Here we report novel shear-sensitive polymeric large compound micelles (LCMs) formed by self-assembly of glutathione end-capped poly(4-vinylpyridine) (GP4VP) in water containing 4 vol% methanol. The amphiphile prefers to form the kinetically stabilized LCMs due to the small length ratio of the hydrophilic part to the hydrophobic part; the encapsulation of the hydrophilic part within LCMs causes only a small enthalpy loss from a thermodynamic view. Sheared by vortex flows generated by vigorous stir, the LCMs evolve to thick wall vesicles, thin wall vesicles, broken vesicles and "pearl-necklace" structures consecutively. The high flexibility of the LCMs and the internal tension caused by the encapsulation of the hydrophilic part are responsible for the high shear sensitivity of the LCMs.
研究领域:
高分子化学
·
胶体与界面科学
·
纳米材料
·
自组装
·
流变学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）