Energy Technology
·
2019
·Vol. 7
·期 6
·1801022
·
IF 3.163
Yang Liu,Qiang Ru,Yuqing Gao,Ping Gao,Fuming Chen,Lingzhi Zhao,Xianhua Hou
Antimony and red phosphorus (RP) hybrid is harvested via a facile mechanical milling strategy. Simultaneously, graphene sheets are introduced to boost the electronic transmission and mitigate the agglomeration of particles. In contrast to pristine Sb and RP electrodes, Sb/P/C hybrid affords comparably promising electrochemical performances. As anodes for lithium-ion batteries, Sb/P/C electrode depicts a reversible capacity of 869 mAh g −1 under 200 mA g −1 after 50 cycles and an excellent rate stability such as 452 mAh g −1 at 3200 mA g −1 . When used for sodium-ion batteries, the hybrid also shows moderate capacities of 544.8 and 511 mAh g −1 at the current of 50 and 200 mA g −1 after 50 cycles, respectively. These excellent properties can be ascribed to the synergetic effect of decreased particle size of milled Sb/P/C, large contact area, adequate energy storage sites, and enhanced electrical conductivity.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
无机化学
·
固体物理
·
电池技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 16
·13384-13391
·
IF 3.289
Bin Lu,Renzong Hu,Jiangwen Liu,Jun Liu,Hui Wang,Min Zhu
To improve the coulombic efficiency (CE) and cycle life of SnO2 anode in lithium ion batteries, SnO2–Cu–graphite composites with dual scale embedding structure are synthesized by ball milling. The SnO2–Cu composite, in which SnO2 nanoparticles with grain size less than 10 nm are uniformly dispersed in inactive nanocrystalline Cu matrix, is firstly obtained by milling the mixture of SnO2 and Cu nanopowders (molar ratio 1 : 2), and then further milling with graphite (C) to obtain SnO2–Cu–C composite with microsized graphite sheets as matrix of SnO2–Cu composite. The 50 h-milled SnO2–Cu composite exhibits higher initial CE (76.0 ± 1.5%) and subsequent CE than 50 h-milled SnO2. Furthermore, the SnO2–Cu–C composite anode is capable of retaining a maximum charge capacity of 450.8 mA h g−1 at 100 mA g−1 after 80 cycles with a capacity retention ratio of 74.4%, displaying superior cyclic stability to as-milled SnO2, SnO2–Cu and SnO2–C composites. The improved CE and cycleability are attributed to the unique dual scale embedding structure that offers good conductivity of electron and lithium ion as well as the nanostructure stability of active materials. This unique composite structure might be extended to other high-capacity anode materials, to achieve high performance lithium ion batteries.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
锂离子电池
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Peilin Cao,Cong Wang,Linpeng Liu,Kaiwen Ding,Jiahua He,Dejin Yan,Nai Lin,Ji'an Duan
The reliability of Cu bonding technology in three-dimensional integration packaging is limited by high sintering temperatures and the growth of oxide at the joining interface. Hence, we propose a bionic adhesion interface of creeper sucker on the Cu substrate and covered with monolayer graphene, which increases the shear strength by 3 times compared to the conventional flat Cu substrate. The covered graphene layer effectively inhibits the generation of oxide at the joint interface and maintains a high shear strength after aging at 300 °C for 48 h Nanoscale Cu particles could reduce the chemical potential energy of the substrate surface , and stable bonding was achieved at 200 °C under a pressure of 2 MPa. Molecular dynamics simulation models reveal crystal structure evolution and residual stresses during the sintering process . This work demonstrates that bionic microstructures applied to copper bonding play an important role in interface enhancement, resulting in reliable bonding of Cu substrate at low temperatures. The method proposed here can provide insight into diversified applications including high-power light-emitting diodes soldering, SiC electronic devices, and flexible electrode interconnects.
研究领域:
材料科学
·
微电子封装
·
纳米技术
·
表面工程
·
固态物理
✓ 已验证
DOI
高影响因子
Advanced Materials Interfaces
·
2018
·Vol. 5
·期 15
·1800515
·
IF 4.834
Lingxia Zheng,Wangwang Hu,Xuwei Shu,Huajun Zheng,Xiaosheng Fang
Cobalt phosphides based materials are considered as promising electrocatalysts for the hydrogen evolution reaction (HER). The catalytic performance can be further enhanced by improving the intrinsic catalytic activity, exposing more active sites and coupling with conductive support. Herein, a novel electrocatalyst based on nitrogen doped reduced graphene oxides decorates with uniformly distributed CoP x nanoparticles with a suitable P/Co ratio ( x = 1.7) via a facile and mild condition. The optimized composite (CoP x /N-rGO) exhibits superior electrocatalytic HER activities with a low overpotential of 104 mV (at 10 mA cm −2 ), a small Tafel slope of 65 mV dec −1 , and long-term stability in the alkaline media, comparable to the performance of other HER electrocatalysts. The remarkable HER performance can be ascribed to the good electrical conductivity of rGO and extra active sites created by nitrogen doping. In addition, the ultrafine nanostructure (average particle size ≈4 nm) and well-dispersed CoP x nanoparticles also help expose more active sites for electrocatalytic reactions, largely hindering the agglomeration and exfoliation. This work provides a versatile route on the design of multifunctional composite materials for renewable energy research with low cost and high activity.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源化学
·
催化化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Mengdi Yuan,Chao Xu,Tieying Wang,Tianying Zhang,Xinyu Pan,Feng Ye
The serious supercooling of erythritol (ET) limits its application in the field of mid-temperature thermal energy storage (TES), especially in the recently developed form-stable phase change materials (PCMs). The primary purpose of this paper is to find out the factors to mitigate the supercooling of ET/expanded graphite (EG) form-stable composite PCM and obtain the correlation among the morphology, kinetic parameters, and a supercooling degree in the non-isothermal crystallization process. Firstly, five types of supercooling relaxation agents (nano-Al 2 O 3 , nano-SiO 2 , CMC, urea, and citric acid) were added to prepare the ET/EG form-stable CPCMs. Among them, the ET/EG/nano-Al 2 O 3 exhibited excellent form-stable ability, a high heat release ratio of 78.9%, and the lowest supercooling degree (Δ T ) of 45.7 °C. Based on the chosen ET/EG/nano-Al 2 O 3 CPCM, the tablet pressures from 1 to 13 MPa were applied, obtaining lowest Δ T decreased by 59.0% in 1 MPa. Moreover, the non-isothermal crystallization processes were discussed on the ET/EG/nano-Al 2 O 3 with the Avrami equation modified by Jeziorny. ET tended to grow spherulites under the high cooling rate of 18 °C/min with triggering as the Johnson-Mehl-Avrami exponent n increased to 4.22. Meanwhile, the supercooling degree increased from 48.8 to 56 °C with the cooling rate growing from 2 to 18 °C/min. And the activity energy Δ E of the ET/EG/nano-Al 2 O 3 CPCM (7092.35 kJ/mol) was smaller than that of the ET/EG CPCM (8211.19 kJ/mol) because of the interaction between the heterogeneous nucleation effect and blocker effect of nano-Al 2 O 3 .
研究领域:
材料科学
·
热能存储
·
物理化学
·
复合材料
·
能源材料
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2018
·
IF 4.427
Xianqiang Yin,Yanji Jiang,Yuehui Tan,Xiangmin Meng,Huimin Sun,Nong Wang
The ability to predict the transport of heavy metal ions in porous media with different surface characteristics is crucial to protect groundwater quality and public health. In this study, the effects of graphene oxide (GO) on co-transport and remobilization of Pb 2+ and Cd 2+ in humic acid (HA), smectite , kaolinite , and ferrihydrite-coated sand media were evaluated via laboratory packed-column experiments. Scanning electron microscope and energy dispersive X-ray analysis showed that the surface morphology of the coated sands was quite different and that ∼56.7–89.9% of the surface was covered by the coating and the major elemental components were C, O, Si, Al, and Fe. GO exhibited high mobility in HA, kaolinite , and smectite-coated sand, but showed high retention in ferrihydrite-coated sand. While GO reduced the transport of Pb 2+ and Cd 2+ , both metal ions also reduced the mobility of GO in coated-sand columns. Elution experiments revealed that GO led to the remobilization and release of the previously sorbed Pb 2+ and Cd 2+ from the coated sand. However, GO could not release Pb 2+ and Cd 2+ from smectite-coated sand columns, probably because smectite has stronger adsorption affinity to the heavy metals than GO. Derjaguin-Landau-Verwey-Overbeek calculations were employed and explained the GO transport behavior in the columns well. Furthermore, the advection-dispersion-reaction equation simulated the cotransport of Pb 2+ and Cd 2+ with GO in the coated sand well. These results are expected to provide insight into the potential impact of coexisting nanomaterials with contaminants in vulnerable soil and groundwater systems.
研究领域:
环境地球化学
·
土壤学
·
水文地质学
·
纳米毒理学
·
环境污染与修复
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2016
·
IF 2.822
Xinhe Zhang,Bo Jin,Linlin Li,Tuo Cheng,Huanhuan Wang,Peiming Xin,Xingyou Lang,Chuncheng Yang,Wang Gao,Yongfu Zhu,Qing Jiang
Non-graphitizable carbon (NGC) has been obtained by carbonizing tubular polypyrrole (T-PPy) synthesized through a self-degraded template method . K-NGC/S composite has been prepared by mixing S with K-NGC via melt-diffusion method where NGC has been activated by potassium hydroxide (denoted as K-NGC) and is used as a conductive additive. The as-prepared K-NGC/S composite shows good specific discharge capacity and rate capability with an initial specific discharge capacity of 1121.9 mAh g − 1 and a specific discharge capacity of 729.7 mAh g − 1 after 50 cycles at a current density of 335 mA g − 1 , which is better than pure S. This improvement in the specific discharge capacity and the rate capability of the cell with K-NGC/S composite as a cathode material is realized by the existence of K-NGC, which can offers a superb conductive environment for S, effectively encapsulate S, restrain the outward diffusion of polysulfides , buffer volume change upon cycling and reduce the dissolution of lithium polysulfides into the electrolyte. The good electrochemical performance of K-NGC/S composite would make it become a promising cathode material for lithium-sulfur batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Zhuanghe Ren,Xin Zhang,Zhenguo Huang,Jianjiang Hu,Yangzhong Li,Shiyou Zheng,Mingxia Gao,Hongge Pan,Yongfeng Liu
Nanosized titanium compounds are particularly effective in catalyzing hydrogen cycling by NaAlH 4 . Titanium hydride (TiH 2 ), as a catalyst, is highly interesting since it contributes hydrogen in addition to active Ti. However, it has been challenging to fabricate nanosized TiH 2 due to the strong affinity of Ti with oxygen. Herein, TiH 2 nanoflakes with a lateral size of ~10 nm and thickness of ~1 nm are successfully synthesized through a novel facile one-pot solvothermal process. In an anhydrous THF solution, LiH reacts with TiCl 4 rapidly at 100 °C forming TiH 2 and LiCl. The newly formed TiH 2 nucleates and grows epitaxially on the graphene surface due to the well-matched lattice parameters, giving rise to the formation of TiH 2 nanoflakes. Both theoretical calculations and experiments reveal the generation of Cl· radicals and unsaturated C C bonds when TiCl 4 reacts with THF, which promotes the formation of TiH 2 . The nanoflake-like TiH 2 on graphene enables an outstanding hydrogen storage performance of NaAlH 4 , i.e., full dehydrogenation at 80 °C and hydrogenation at 30 °C and under 100 bar H 2 , with a practical hydrogen capacity of 4.9 wt%, which has been never reported before.
研究领域:
材料科学
·
纳米化学
·
能源化学
·
固态储氢
·
催化化学
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 15
·期 5
·4722-4738
·
IF 1.5
Wen Liu,Yueli Shi,Quanchao Zhuang,Yongli Cuiab,Zhicheng Ju,Yanhua Cui
The effect of ethylene glycol bis(propionitrile) ether(DENE) as a novel electrolyte additive on the electrochemical performance of a graphite anode was studied in this paper. Fourier transform infrared spectroscopy(FTIR), charge/discharge tests, cyclic voltammetry(CV), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and electrochemical impedance spectroscopy(EIS) were used to investigate the SEI film and the cycle performance of graphite anode. The initial charge capacities of the graphite electrode in the electrolytes without and with 1% DENE were 319 mAhg −1 and 349 mAhg −1 , respectively. After 60 cycles, the charge capacities without and with 1% DENE were 315 mAhg -1 and 350 mAhg -1 , respectively. and the capacity retention rates were 95.8% and 98.1%, respectively. DENE promoted the formation of a thin and uniform SEI layer and improved the stability of the electrode. The addition of DENE effectively improved the electrochemical performance of graphite anodes.
研究领域:
电化学
·
材料科学
·
能源存储
·
电池技术
·
表面化学
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2016
·Vol. 122
·期 5
·515
·
IF 1.444
Huang Liang,Zhu Pengli,Li Gang,Sun Rong
The partial reduced graphene oxide (P-rGO) sheets-wrapped nickel foams (NF@P-rGO) were prepared by hydrothermal method, and then their epoxy composites were fabricated via a simple drop-wetting process. The P-rGO sheets on the metal networks could effectively improve the compatibility between nickel foam and epoxy resin, thus greatly accelerate the wetting of epoxy resin on the foams and avoid cracks in the network–polymer interface. Owing to the existence of high-efficiency conductive metal networks, the NF@P-rGO/epoxy composite has a high thermal conductivity of 0.584 W m −1 K −1 , which is 2.6 times higher than that of neat epoxy resin. Additionally, owing to the improved wetting ability, NF@P-rGO-10 wt% boron nitride (BN) microsheets/epoxy composites could be fabricated and have a further higher thermal conductivity of 0.71 W m −1 K −1 . We believe the use of P-rGO as a novel surface modifier and the following liquid polymer drop-wetting could be an effective method to obtain novel and outstanding metal foam/polymer composites.
研究领域:
材料科学
·
高分子复合材料
·
热管理材料
·
表面与界面工程
✓ 已验证
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2020
·
IF 6.551
Hao Lei,Daohui Zhou,Jiao Tang,Xiaoping Hu,Ning Pan,Hao Zou,Fangting Chi,Xiaoqiang Wang
A novel approach to synthesize phytic acid (PA) functionalized graphene oxide (P-pFGO-7) treated by the photo-Fenton reaction has been designed, which has been used as an adsorbent for efficient capture of U(VI) from aqueous solution. The structure and morphology of P-pFGO-7 were characterized well. The adsorption property for P-pFGO-7 was comprehensively assessed by batch experiments, showing the high adsorption capacity (266.7 mg/g, at pH = 4.0, T = 298 K), fast adsorption kinetics (~10 min), good selectivity for U(VI) and Ln-An ions in various coexisting ions and excellent regeneration capacity. With the assistance of various characterization techniques and batch adsorption results, it is found that PA makes the most contribution to coordinate U(VI) heavily depending on the P O moiety. P-pFGO-7 could be regenerated by 0.1 mol/L Na 2 CO 3 with ~95% desorption efficiency and reused well after five recycles. This present work provides a feasible route to modify graphene oxide and extend PA for potentially practical application in the removal of U(VI) from radioactive wastewater .
研究领域:
环境化学
·
核科学与技术
·
材料科学
·
水处理技术
·
放射化学
·
纳米材料
·
吸附科学
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2013
·
IF 2.915
Bin Zeng,Xiaohua Chen,Xutao Ning,Chuansheng Chen,Aiping Hu,Weina Deng
Carbon nanotubes and reduced graphene oxides (CNTs/rGO) sphere decorated with Cu 2 O, CuO nanoparticles (Cu x O–CNTs/rGO) was successfully synthesized by spray drying and post-calcinating method for the first time. Scanning electron microscopy and transmission electron microscopy observations confirmed that CNTs/rGO formed a spherical micrometer structure and Cu x O nanoparticles were decorated on their surface. The experimental results indicated that this novel architecture enhanced photocatalytic performance with 97.5% decomposition of methyl orange (MO) after 20 min in the presence of H 2 O 2 under visible light irradiation, which was much higher than that of pure Cu x O powders (31.2%).
研究领域:
材料科学
·
纳米科技
·
光催化
·
环境功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）