JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Wei Feng,Huirong Liu,Mingliang Zhao,Jianling Li,Feiyu Kang
The poly(ethylene oxide) based composite solid electrolyte(PEO-CSE) is an effective solution for developing high-performance solid-state lithium battery . However, the poly(ethlene oxide)(PEO) based solid-state lithium battery using 4.0 V cathode suffers from severe interfacial instability problems. In this work, we add additive lithium difluorophosphate(LiPO 2 F 2 ) into the PEO-CSE to form a stable and low resistance interphase at the cathode/electrolyte interface during charge/discharge process. The electrochemical stability window of PEO-CSE increases to ∼5.0 V. Besides, the electrochemical performance of PEO based solid-state lithium battery with LiCoO 2 as cathode is excellent. The discharge capacity of LiCoO 2 /Li cell with LiPO 2 F 2 reaches 108.5 mAh g −1 at 1.0C. In contrast, the discharge capacity that without LiPO 2 F 2 is only 60.0 mAh g −1 . Meanwhile, the PEO-CSE with LiPO 2 F 2 cell delivers stable cycle performance at 4.2 V. The capacity retention maintains 88.5% compared with 16.1%(without LiPO 2 F 2 ) after 100 cycles. Furthermore, it's still maintains 83.3% after 150 cycles. In addition, the cathode/electrolyte interface is analyzed by transmission electron microscope(TEM) and X-ray photoelectron spectroscopy(XPS). Galvanostatic intermittent titration test(GITT) is used to analyze the dynamic diffusion performance. This strategy provides a simple and effective way to improve the high voltage stability of the cathode/electrolyte interface.
研究领域:
电化学
·
材料科学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2021
·Vol. 64
·期 8
·2008-2016
·
IF 8.273
Wen Xin,Lin Chensheng,Luo Min,Fan Huixin,Chen Kaichuang,Ye Ning
[PO 4 ] 3− possesses small microscopic second-order susceptibility and polarizability anisotropy, which inherently result in weak second-harmonic generation (SHG) and small birefringence. Herein, a new noncentrosymmetric phosphate, [C(NH 2 ) 3 ] 3 PO 4 ·2H 2 O, was successfully designed and synthesized by a solution evaporation method. [C(NH 2 ) 3 ] 3 PO 4 ·2H 2 O without metal ions is composed of planar conjugated guanidine cations and PO 4 tetrahedrons, which are connected by hydrogen bonds, forming a three-dimensional network. Physical property measurements indicate that the title compound displays an SHG response of 1.5 × KH 2 PO 4 (KDP) and a larger birefringence (0.055@546.1 nm) compared with most reported ultraviolet nonlinear optical phosphates. Furthermore, first-principles calculations reveal that the π-conjugated planar [C(NH 2 ) 3 ] + cations and [PO 4 ] 3− groups are responsible for its excellent linear and NLO properties.
研究领域:
材料科学
·
光学工程
·
无机化学
·
晶体工程
·
非线性光学
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2011
·Vol. 22
·期 12
·2237-2243
·
IF 1.776
Chenhao Ke,Juan Li,Keyi Fang,Qiliang Zhu,Jin Zhu,Qing Yan
A hyperbranched polyamine was prepared using an A 2 + B 3 approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR-PA6 was investigated by limiting oxygen index (LOI), UL-94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR-PA6 could reach 36.5 with V-0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR-PA6 could still maintain V-0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P-O-C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.
研究领域:
高分子化学
·
材料科学
·
阻燃材料
·
热稳定性
·
聚合物复合材料
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Chao Yang,Jun Yang,Ge Song,Limin Zang,Qifan Liu,Jianhui Qiu,Xue Yang,Chun Wang
Oil/water separation has recently attracted a great deal of attention for research due to the frequent occurrence of an oil spill as well as the increase of industrial and household oily wastewater. Therefore, the purpose of this study is to demonstrate underwater superoleophobic crosslinked phosphorylated poly(vinyl alcohol) hydrogel coated stainless steel mesh (CL-PPVA@SSM), which was fabricated using a simple dip-coating method and aldol reaction on the mesh substrate. The as-prepared CL-PPVA@SSM is capable of separating oil from a variety of different oil/water mixtures with high separation efficiency up to 99.2%, excellent recyclability and fast water permeate flux of 467.7 L m –2 h –1 , which makes it suitable for the separation of oil-water mixtures from oil-water emulsions. Also, in the oil-water separation process, the CL-PPVA@SSM is capable to remove organic dye from the water. The CL-PPVA@SSM exhibits stability under various harsh conditions such as mechanical abrasion. Importantly, the CL-PPVA@SSM shows a massive potential to separate kitchen waste oil/water mixtures due to the underwater superoleophobic property as required for the recycling of kitchen waste oil. Therefore, this method has been met with a promising application prospect of practical application.
研究领域:
材料科学
·
环境工程
·
高分子化学
·
表面工程
·
化学工程
·
纳米技术
·
水处理技术
✓ 已验证
DOI
高影响因子
FUEL PROCESSING TECHNOLOGY
·
2019
·
IF 4.507
Haonan Qu,Bingyi Liu,Guohua Gao,Yiming Ma,Yanmei Zhou,Hua Zhou,Li Li,Yonghong Li,Shengjian Liu
Levulinic acid (LA) is a versatile key building block in the conversion of carbohydrates and it is an important basic chemical with various potential uses. MIL-100(Fe) loading with insoluble lysine functionalized phosphotungstic acid (Lys-PM 2 ) as heterogeneous catalysts have been synthesized for the conversion of glucose to LA in water. The optimized yield of LA is obtained by using Lys-PM 2 to catalyze glucose conversion is comparable to the majority of effective catalysts. The highest yield of LA (57.9%) is obtained at 150 °C for 9 h with 100 mg glucose and 25 mg Lys-PM 2 , since the Brønsted acidity and Lewis acidity of Lys-PM 2 . And the catalyst is able to recycle at least four times. It demonstrates the potential of Lys-PM 2 for the conversion of biomass.
研究领域:
催化化学
·
绿色化学
·
生物质能源
·
有机转化
·
材料化学
·
可持续化学
✓ 已验证
DOI
高影响因子
BioEnergy Research
·
2015
·Vol. 8
·期 3
·1263-1274
·
IF 3.541
Zhang Zhi-bo,Lu Qiang,Ye Xiao-ning,Wang Ti-peng,Wang Xian-hua,Dong Chang-qing
Solid phosphoric acid (SPA) catalysts with different carriers were prepared and used for catalytic fast pyrolysis of poplar wood to produce levoglucosenone (LGO), a valuable anhydrosugar derivative that can be used in various organic synthesis applications. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were performed to evaluate the catalytic capabilities of these catalysts under different reaction conditions. The results indicated that SPA catalyst prepared with the SBA-15 carrier exhibited the best catalytic capability for selectively producing LGO. Both the catalytic pyrolysis temperature and catalyst-to-biomass ratio affected the pyrolytic products greatly. The maximal LGO yield reached as high as 8.2 wt% from poplar wood, obtained at the pyrolysis temperature of 300 °C and the catalyst-to-biomass ratio of 1. The by-products during the catalytic pyrolysis process were mainly acetic acid (AA) and furfural (FF). In addition, the SPA catalyst possessed better catalytic capability than the liquid phosphoric acid (H 3 PO 4 ) catalyst to produce LGO.
研究领域:
生物能源
·
催化化学
·
生物质转化
·
热解化学
·
绿色化学
·
可再生资源利用
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2017
·Vol. 44
·期 2
·1731-1736
·
IF 2.986
Jingbo Yu,Qian Zhang,Yi Gu,Anxian Lu
In this study, phosphate glasses embedded with Fe 2 O 3 quantum dots were prepared via a conventional melt quenching technology with further heat treatment. The effect of Fe 2 O 3 content on the structural, optical and magneto-optical properties was investigated. The results showed that the addition of Fe 2 O 3 had no obvious influence on the structure units that built up the host glass and the amorphous nature of glass. In the glass matrix , the existence of Fe 2 O 3 quantum dots was confirmed by high resolution transmission electron microscope . Meanwhile, optical study clearly demonstrated a red shift in optical cut-off wavelength resulted from the size quantization effect. The highest Verdet constant (22.33°/T-cm) was measured for the glass containing 1 mol% Fe 2 O 3 , which was ~ 7 times higher than that of the glass matrix. As the increment of Fe 2 O 3 contents, a phase evolution of Fe 2 O 3 quantum dots from amorphous phase to γ-Fe 2 O 3 phase was recorded due to the Ostwald Ripening effect. Interestingly, a concentration quenching phenomenon in Verdet constant was observed along with the phase evolution of Fe 2 O 3 quantum dots. When the content of Fe 2 O 3 is up to 2 mol%, the glass exhibited paramagnetism with the Verdet constant of − 2.833°/T-cm. This finding can provide a new idea for the development of quantum dot embedded magneto-optical glass.
研究领域:
材料科学
·
磁光材料
·
纳米材料
·
无机非金属材料
·
光学玻璃
·
凝聚态物理
✓ 已验证
DOI
高影响因子
RARE METALS
·
2019
·Vol. 38
·期 6
·588-600
·
IF 1.785
Huang Lei,Su Kun,Zheng Yu-Feng,Yeung Kelvin Wai-Kwok,Liu Xiang-Mei
A TiO 2 nanofilm was prepared on the surface of AZ31 magnesium alloy with controllable thickness through atomic layer deposition (ALD) technique, which can adjust the corrosion behaviors of AZ31 Mg alloy. Compared with the untreated Mg alloys, corrosion current densities ( i corr ) can decline by 58% in the 200-cycles TiO 2 -covered Mg alloy and further decline by up to 74% with the thickness of nanofilm up to 63 nm (400 cycles). The subsequent modification with a cross-linked conversion layer of 3-amino-propyltriethoxysilane (APTES) by a dipping method can produce a compact silane coating on TiO 2 nanofilm, which can seal pinholes of TiO 2 nanofilm and serve as a barrier to further adjust the corrosion behavior of the substrate. The i corr can decline about two orders of magnitude in the TiO 2 /silane composite coating. Making the adjustable corrosion rate come true, which can be attributed to the precise control on the thickness of metal oxide nanofilm and additional protection from the compact silane coating. In vitro study discloses that the TiO 2 /silane hybrid coating shows higher expression of alkaline phosphatase (ALP) and can promote cellular adhesion and proliferation with better cytocompatibility than untreated Mg alloy.
研究领域:
材料科学
·
生物医学工程
·
腐蚀科学
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2016
·
IF 3.42
Haibin Li,Fei Jiang,Song Ye,Yingying Wu,Kaiping Zhu,Deping Wang
The strontium-substituted hydroxyapatite microspheres (SrHA) incorporated alginate composite microspheres (SrHA/Alginate) were prepared via adding SrHA/alginate suspension dropwise into calcium chloride solution, in which the gel beads were formed by means of crosslinking reaction. The structure, morphology and in vitro bioactivity of the composite microspheres were studied by using XRD, SEM and EDS methods. The biological behaviors were characterized and analyzed through inductively coupled plasma optical emission spectroscopy (ICP-OES), CCK-8, confocal laser microscope and ALP activity evaluations. The experimental results indicated that the synthetic SrHA/Alginate showed similar morphology to the well-known alginate microspheres (Alginate) and both of them possessed a great in vitro bioactivity. Compared with the control Alginate, the SrHA/Alginate enhanced MC3T3-E1 cell proliferation and ALP activity by releasing osteoinductive and osteogenic Sr ions. Furthermore, vancomycin was used as a model drug to investigate the drug release behaviors of the SrHA/Alginate, Alginate and SrHA. The results suggested that the SrHA/Alginate had a highest drug-loading efficiency and best controlled drug release properties. Additionally, the SrHA/Alginate was demonstrated to be pH-sensitive as well. The increase of the pH value in phosphate buffer solution (PBS) accelerated the vancomycin release. Accordingly, the multifunctional SrHA/Alginate can be applied in the field of bioactive drug carriers and bone filling materials.
研究领域:
生物材料学
·
骨组织工程
·
药物递送系统
·
生物医学工程
·
再生医学
·
生物无机化学
·
药剂学
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2020
·
IF 5.778
Li Wang,Ya Liu,Hongsheng Lu,Zhiyu Huang
Plastic waste has caused severe environmental problems. Some additives in plastics, like organophosphates, enter the environment with plastic waste, causing significant harm to plants and creatures. However, the primary method of recycling phosphorus-containing plastic, especially polycarbonate and acrylonitrile-butadiene-styrene copolymer (PC/ABS), is a mechanical method, which not only does not effectively separate plastics and organophosphates but also tends to cause polymer degradation during recycling. In order to overcome these problems, we proposed an efficient and sustainable approach to recycle of phosphorus-containing plastic. In this method, N, N -dimethylcyclohexylamine (DMCHA), a switchable hydrophilicity solvent (SHS), was used to react with and extract organophosphates in plastic, achieving the goal of complete separation of plastic and organophosphates. PC/ABS can be recovered by precipitation. Dissolved organophosphates can also be easily recovered due to the switching characteristics of SHS. Both of recovered materials were of high purity and were close to virgin materials. This technique is an easy and efficient approach to separate plastic and organophosphates, which has excellent application prospects in recycling phosphorus-containing plastic.
研究领域:
环境科学
·
高分子化学
·
绿色化工
·
资源循环利用
·
材料科学
✓ 已验证
DOI
高影响因子
Energy Technology
·
2019
·Vol. 7
·期 4
·1800981
·
IF 3.163
Bangwei Deng,Hao Wang,Xiang Li,Yan Ding,Daming Sun,Jun Ma,Mianzhong Chen,Tao Chen,Feng Gao,Meizhen Qu,Gongchang Peng
Tris(trimethylsilyl)phosphite (TMSPi) has been reported to be an excellent electrolyte additive. However, scarce reports exist on the effect of the charge cutoff potential on the cyclic stability using high-performance LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)–mesocarbon microbead (MCMB) full cells. Herein, a high-loading and repeatable NCM622–MCMB coin-type full cell is successfully prepared, and the role of TMSPi on such a full cell at charge cutoff potentials of 4.25 and 4.45 V is studied. Theoretical calculations and detailed analyses reveal that it is oxidized in the first charging process due to its unsaturated P—O bonds, thus forming a stable P—O—F-rich cathode electrolyte interphase and preventing severe decomposition of the electrolyte over NCM622 during long-term cycling. In addition, the P—O and Si—O bonds of TMSPi both display HF-scavenging ability. Moreover, TMSPi may react directly with the LiPF 6 -based electrolyte to form some intermediate products that can be reduced on the MCMB electrode, thereby modifying the solid electrolyte interphase and improving the stability of MCMB during lithium intercalation.
研究领域:
电化学
·
材料科学
·
能源存储
·
锂离子电池
·
界面化学
·
电极材料
✓ 已验证
DOI
高影响因子
FUEL
·
2025
·
IF 7.5
Renjie Yang,Genmao Guo,Pengfei Chen,Yang Yang,Fangming Jin
Cellulosic biomass, as the most abundant renewable resource on Earth, holds great potential for achieving carbon neutrality through efficient valorization, where its hydrolysis to glucose represents a critical initial step. Conventional methods relying on homogeneous acids face limitations such as poor catalyst recycling and significant environmental issues. Carbon-based solid acids (CSAs) for cellulose hydrolysis have emerged as promising alternative, yet, their synthesis often requires high-temperature calcination to construct stable aromatic frameworks, leading to complex and energy-intensive processes. In this study, we propose a novel approach of utilizing the inherent aromatic structure of lignite for synthesizing lignite-derived solid acids (LSAs). We found that lignite was successfully sulfonated directly at low temperature without prior calcination. The synthesized LSAs which possess abundant sulfonic and weak acid sites, proved rapid and efficient hydrolysis of cellulose, resulting in high glucose yield of 57.4 % in just 45 min at 190 °C. In situ Fourier-transform infrared (FTIR) analysis further revealed the weakening of hydrogen bonds and cleavage of glycosidic bonds in cellulose facilitated by LSAs. This work provides a sustainable and low-carbon way for the integrated valorization of lignite and cellulosic biomass.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）