FUEL
·
2023
·
IF 7.4
Muhammad Yousaf,Yuzheng Lu,Majid Niaz Akhtar,Ali Sarosh Khawaja,Khalid Mujasam Batoo,Sajjad Hussain,Asma Noor,Muhammad Akbar,Hu Enyi,M.A.K Yousaf Shah,Naveed Mushtaq,Bin Zhu
Lattice defects in rare earth (RE) doped single-phase semiconductor materials play a key role in structural modifications and physicochemical characteristics, resulting to enhance the ionic conductivity. In this work, we synthesized lanthanum doped samarium oxide with different mole ratios and applied it as a ceramics membrane fuel cell device to enable high peak power density (PPD) at low operational temperatures (520–400 °C). The samples are capable of triple charge H + /O 2− /e − conduction and enhance the catalytic function of the cell in terms of HOR and ORR kinetics by producing lattice defects. The fabricated Sm 1.5 La 1.5 Fe 5 O 12 (2-SLFO) fuel cell device exhibits a high OCV of 1.13 V with a maximum PPD of 864.26 mW/cm 2 at 520 °C. Durability measurement verifies that 2-SLFO-based fuel cell device can be worked for 60 h under fuel cell conditions (H 2 /air) at 520 °C. The first principle calculations using density functional theory (DFT) demonstrate that the higher oxygen vacancy concentration in the 2-SLFO sample may cause to the higher charge-transfer kinetics, subsequent in the enhancement of ions transportation of the fabricated fuel cell device.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
燃料电池技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 47
·期 7
·9083-9089
·
IF 3.83
Hongli Liu,Lantian Zhang,Jing Li,Hongyan Li,Guoqing An,Yajing Li,Zhong Chen
SiBCN ceramic aerogels have excellent properties such as ultra-high temperature stability, low density and high thermal insulation . The aerogels have better potential applications in aerospace and other fields. However, similar to inorganic aerogels , the low mechanical strength of SiBCN ceramic aerogels are the main limitation of its application. Based on the principle of inorganic double network enhancement, the first network was constructed by PVA and HNTs , and HNTs/SiBCN dual network aerogels were constructed by SiBCN ceramic aerogels as the second network. The structure and mechanical properties were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), specific surface area analyzer and pressure tester. Compared with SiBCN ceramic aerogels, 6 wt% HNTs-SiBCN ceramic hybrid aerogels have better microscopic properties (maintaining basic porous network structure and structural stability) and mechanical properties.The continuous HNTs first network can effectively transfer the stress load and enhance the strength of SiBCN ceramic aerogels.
研究领域:
材料科学
·
无机非金属材料
·
纳米复合材料
·
航空航天材料
·
高分子复合材料
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2024
·
IF 3.4
Kaiwu Fu,Dandan Ma,Nan Zhang,Jiacheng Cao,Xiaonan Chen,Min Zhu,Peiqing La
Oxide thermoelectric materials have a wide range of applications due to their excellent stability, low cost, and non-toxic properties. However, their low thermoelectric conversion efficiency limits their practical use. Therefore, improving the performance of oxide thermoelectric materials has become the focus of current research. Interface engineering is an important approach to enhance thermoelectric properties by optimizing electrical transport properties through multiphase composite regulation of phase interface structure. A series of Sr 0.6 La 0.4 Nb 2 O 6-δ /x wt% graphite (x = 0, 0.6, 1.0, 1.5, 2.0) composite ceramics thermoelectric materials were prepared, and the mechanism for improving their thermoelectric properties was explored. Graphite serves as an electron momentum amplifier within the Sr 0.6 Ba 0.4 Nb 2 O 6-δ matrix, thereby augmenting both conductivity and power factor values significantly. Notably, the incorporation of 1.5 wt% graphite led to a remarkable enhancement in the thermoelectric power factor at 1073 K, reaching an impressive value of 254.84 μW/K 2 m - representing a notable increase of approximately 51 % compared to the unmodified sample - primarily attributed to the elevated electrical conductivity .
研究领域:
材料科学
·
无机非金属材料
·
热电转换
·
固态物理
·
功能陶瓷
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 46
·期 13
·21560-21568
·
IF 3.83
Mingcai Li,Xuejie Zhang,Yinjian Zheng,Yaliang Xu,Haoran Zhang,Yingliang Liu,Bingfu Lei
The discovery of light converter excited by near-ultraviolet (UV) superior broadband blue-emitting lighting source is a main challenge in plant growth LEDs. In this study, SrLu 2 O 4 :Ce 3+ , Li + , F − blue phosphor has been synthesized via a solid-state reaction. Benefitting from doping of F − ions, SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor (λ ex = 405 nm, λ em = 460 nm) shows a strong broadband (FWHM = 90 nm) blue-emitting with lower critical concentration of Ce 3+ ions and an increasing 6.9% thermal quenching performance (92.1% @ 423 K of the peak intensity at room temperature). Moreover, a blue light converter composed of SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor and glass matrix is obtained based on phosphor-in-glass (PiG) technology, exhibiting excellent thermal stability and outstanding moisture resistance . A red light converter with commercial red phosphor is obtained by the same method. Furthermore, by combining of two light converters with near-UV chip, a proof-of-concept plant growth high power LED is achieved and applied in indoor Italian lettuce growing in comparison with commercial plant lamps.
研究领域:
材料科学
·
光学工程
·
农业光电子学
·
固体发光
·
无机非金属材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·Vol. 48
·期 22
·33455-33461
·
IF 5.532
Yuyu Liu,Wenye Deng,Xianghui Chen,Yan Xue,Xuelian Bai,Huimin Zhang,Aimin Chang,Yongxin Xie
A series of novel high temperature negative temperature coefficient (NTC) composite ceramics based on (1- x )CaMn 0.05 Zr 0.95 O 3 - x NiMn 2 O 4 ( x = 0, 0.1, 0.2, 0.3) were fabricated by using the solid-state method. The Rietveld refinement method and backscattered electron (BSE) image confirmed the absence of any other phase. The conduction mechanism of the composite ceramics was determined by analyzing the complex impedance and resistance-temperature characteristics, which could be related to the formation of a continuous Mn 3+ -O-Mn 4+ network. The effect of spinel content on the high temperature stability was analyzed using aging tests. The ρ 400°C , ρ 700°C and B 400/700 values of the NTC thermistors were determined to be 4.9 × 10 6 –1.2 × 10 4 , 1.4 × 10 5 –0.8 × 10 3 Ω cm and 12739-5712 K, respectively. This indicated that the electrical properties could be tuned by adjusting the weight ratio of CaMn 0.05 Zr 0.95 O 3 and NiMn 2 O 4 . The findings obtained in this study reveal that the composite NTC thermistor exhibits a good application potential at high temperatures and under harsh environments.
研究领域:
材料科学
·
无机非金属材料
·
电子功能材料
·
固态离子学
·
高温传感器技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2018
·Vol. 44
·期 17
·21000-21003
·
IF 3.057
Jie Zhang,Zhenxing Yue,Yu Luo,Longtu Li
A cofired trilayer ceramic architecture showing as MgTiO 3 /TiO 2 /MgTiO 3 was designed to realize temperature-stable and ultrahigh- Q microwave dielectrics in the typical MgTiO 3 -TiO 2 system. The effects of TiO 2 content on the microwave dielectric properties of cofired trilayer ceramics were studied. Through the design of cofired trilayer architecture, the chemical reactions between MgTiO 3 and TiO 2 were limited within a narrow region of MgTiO 3 /TiO 2 interfaces (~ 15 µm in width), which could be beneficial for optimizing the microwave dielectric properties. Excellent characteristics of ε r ~ 18.38, Q×f value ~ 169,900 GHz and τ f ~ − 1 ppm/°C were gained for the MgTiO 3 /TiO 2 /MgTiO 3 ceramic architectures stacked with 1.63 vol% TiO 2 . The current work could serve as new strategies to develop high-performance dielectric resonators and multilayers for 5G wireless communication applications.
研究领域:
材料科学
·
无机非金属材料
·
电子陶瓷
·
微波介质材料
·
功能陶瓷
✓ 已验证
DOI
高影响因子
Journal of Materiomics
·
2023
·Vol. 10
·期 5
·995-1003
·
IF 9.4
Wei Peng,Jianglei Chang,Jianwei Zhao,Dawei Wang,Zhen Liu,Genshui Wang,Shuxiang Dong
Piezoelectric PZT ceramics with high piezoelectric properties and good thermal stability are urgently desired concerning the practical application. New compositions of LiNbO 3 modified Pb(Ni 1/3 Nb 2/3 )O 3 PbZrO 3 PbTiO 3 ceramics have been prepared in this study. The effects of the introduction of the LiNbO 3 on the system were comprehensively investigated in terms of the phase structure, microstructure, electric properties, and thermal stability behavior of the ceramics. All compositions are located in the morphotropic phase boundary (MPB) region, and the ratio of the rhombohedral (R) phase increases obviously with the increase of LiNbO 3 concentration. With increasing the LiNbO 3 content, the piezoelectric properties were significantly enhanced. The sample added with 2% (in mole) LiNbO 3 shows excellent electric properties, including T m = 185 °C, ε r = 5,643, k p = 0.626, Q m = 51, d 33 = 902 pC/N. More importantly, no thermal depolarization behavior was observed in the temperature range of 25–100 °C. For PNN-PZT- x %LN ceramics, which is mainly attributed to the pinning effect resulted by the Li Pb ' − Nb Zr/Ti ∙ defect dipoles.
研究领域:
材料科学
·
功能陶瓷
·
压电材料
·
固态物理
·
电子材料
✓ 已验证
DOI
高影响因子
Advanced Science
·
2019
·Vol. 6
·期 17
·1901096
·
IF 15.804
Shaofei Wen,Yunpeng Wang,Bijiao Lan,Weida Zhang,Zhuo Shi,Shichao Lv,Yujun Zhao,Jianrong Qiu,Shifeng Zhou
Transparent nanoceramics embedded with highly dense crystalline domains are promising for applications in missile guidance, infrared night vision, and laser and nuclear radiation detection. Unfortunately, current nanoceramics are strictly constrained by the stringent construction procedures such as super-high pressure and containerless processing. Here, a pressureless crystallization engineering strategy in glass for elaboration of transparent nanoceramics and fibers is proposed and experimentally demonstrated. By intentional creation of a sharp contrast between nucleation and growth rates, the crystal growth rate during glass crystallization can be significantly suppressed. Importantly, this unique phase-transition habit enables the achievement of transparent nanoceramics and even smooth fibers with extremely tiny crystalline size (≈20 nm) and high crystallinity (≈97%) under atmospheric pressure. This allows the generation of an attractive nonlinear optical response such as dynamic optical filtering and luminescence in the mid-infrared waveband of 4300–4950 nm. These findings highlight that the strategy to switch the phase-transition habit of glass into the unconventional crystallization regime may provide new opportunities for the creation of next-generation nanoceramics and fibers.
研究领域:
材料科学
·
无机非金属材料
·
光学功能材料
·
纳米陶瓷
·
玻璃物理
✓ 已验证
DOI
高影响因子
Nano Energy
·
2016
·
IF 11.553
Jingxian Zhang,Ning Zhao,Miao Zhang,Yiqiu Li,Paul K. Chu,Xiangxin Guo,Zengfeng Di,Xi Wang,Hong Li
Solid-state electrolytes with high ionic conductivity , large electrochemical window, good mechanical properties , and easy processability are needed for high-energy solid-state lithium batteries . In this work, composite membranes consisting of lithium garnet (i.e. Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 , LLZTO) particles and Li-salt-free polyethylene oxides (PEOs) are produced as solid-state electrolytes. Li-ion-conducting particles in nano-scale are crucial for the enhancement of conductivity and the membranes containing ~40 nm LLZTO particles exhibit conductivities nearly two orders of magnitude larger than those with the micro-scale ones, which is attributed to the difference in specific surface area related to the percolation effect. Compared to the conventional PEO doped with lithium salt, the insulating PEO in PEO:LLZTO membrane electrolyte is conducive to the suppression of lithium dendrite growth owing to prohibition of current flow. With PEO:LLZTO membrane electrolytes in conductivity of 2.1×10 −4 S cm −1 at 30 °C and 5.6×10 −4 S cm −1 at 60 °C, the solid-state LiFePO 4 /PEO:LLZTO/Li and LiFe 0.15 Mn 0.85 PO 4 /PEO:LLZTO/Li cells deliver energy densities of 345 Wh kg −1 (662 Wh L −1 ) and 405 Wh kg −1 (700 Wh L −1 ) (without the package weight or volume) with good rate capability and cycling performance. This study suggests that the conjunction of nano-scale Li-ion-conducting particles and an insulating polymer provides a promising solution to produce powerful solid-state electrolytes for high-performance solid-state lithium batteries .
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子科学
·
固态电池技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 12
·21859-21868
·
IF 5.1
Haiyan Guo,Kuibao Zhang,Yuxiang Li
In this work, the irradiation response of A 2 Ti 2 O 7 (A represents rare earth elements of Gd, Dy, Ho, Er, Yb and Nd) series ceramics were systematically studied under 3 MeV Au 2+ ions. The structural changes pre- and post-irradiation were characterized using X-ray diffraction (XRD), grazing incidence X-ray diffraction (GIXRD) and Raman spectroscopy . After heavy ion irradiation , all the samples undergo structural transformations from ordered pyrochlore to disordered fluorite and then to amorphous phase. The sample surface became fully amorphous when exposed to the maximum irradiation dose. The 5RETO high-entropy pyrochlore exhibits the lowest rate of amorphization during the process of structural transformation. The cation radius ratio and mixed entropy are the primary factors influencing amorphization rate. The cation radius ratio shows a strong positive correlation with the amorphization rate, while the mixed entropy demonstrates a weak negative correlation with the amorphization rate. The cation radius ratio can thus serve as a reliable indicator for predicting the radiation resistance of high-entropy pyrochlore ceramics.
研究领域:
材料科学
·
核材料
·
固态化学
·
辐射效应
·
无机非金属材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2018
·
IF 6.945
Dongjiu Xie,Shaojie Chen,Zhihua Zhang,Jie Ren,Lili Yao,Linbin Wu,Xiayin Yao,Xiaoxiong Xu
The combination of high conductivity and good stability against Li is not easy to achieve for solid electrolytes , hindering the development of high energy solid-state batteries . In this study, doped electrolytes of Li 3 P 1- x Sb x S 4-2.5 x O 2.5 x are successfully prepared via the high energy ball milling and subsequent heat treatment . Plenty of techniques like XRD , Raman, SEM, EDS and TEM are utilized to characterize the crystal structures, particle sizes, and morphologies of the glass-ceramic electrolytes. Among them, the Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 ( x = 0.02) exhibits the highest ionic conductivity (∼1.08 mS cm −1 ) at room temperature with an excellent stability against lithium. In addition, all-solid-state lithium batteries are assembled with LiCoO 2 as cathode, Li 10 GeP 2 S 12 /Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 as the bi-layer electrolyte, and lithium as anode. The constructed solid-state batteries delivers a high initial discharge capacity of 133 mAh g −1 at 0.1C in the range of 3.0–4.3 V vs. Li/Li + at room temperature, and shows a capacity retention of 78.6% after 50 cycles. Most importantly, the all-solid-state lithium batteries with the Li 10 GeP 2 S 12 /Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 electrolyte can be workable even at −10 °C. This study provides a promising electrolyte with the improved conductivity and stability against Li for the application of all-solid-state lithium batteries.
研究领域:
材料科学
·
电化学
·
固态电池
·
能源存储
·
无机非金属材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2012
·Vol. 39
·期 4
·3915-3919
·
IF 1.751
Junxia Wang,Hengchang Nie,Chunfeng Lan,Genshui Wang,Xianlin Dong,Xuefeng Chen,Fei Cao,Hongliang He
Porous Pb (Zr 0.95 Ti 0.05 ) O 3 / x MgO (PZT/MgO, x =0, 0.1, 0.2, 0.5 and 1.0 wt%) ferroelectric ceramics were prepared with MgO nanoparticles as reinforcing phase. The effects of MgO nanoparticles on the phase, microstructure, electrical and mechanical properties of as-prepared ceramics were investigated. The results show that the grain size is reduced obviously when increasing the amount of MgO. Compared with pure porous PZT, T C of MgO-added PZT ceramics shifts to higher temperature. Moreover, dielectric, ferroelectric and piezoelectric properties show no much degradation. Further, PZT/MgO ceramics possess enhanced mechanical properties compared to pure porous PZT ceramics, the largest increment of the fracture toughness and hardness being 31.3% and 19.8%, respectively. The optimal electrical and mechanical properties are obtained with the addition of less than 0.5 wt% MgO nanoparticles.
研究领域:
材料科学
·
无机非金属材料
·
功能陶瓷
·
电子材料
·
固态物理
·
纳米复合材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）