JOURNAL OF MOLECULAR LIQUIDS
·
2019
·
IF 4.561
Yajun Li,Kui Wu,Lei Liang
The solid-liquid equilibrium solubility of 2-phenylacetamide in sixteen pure solvents, i.e. methanol, ethanol, n -propanol, isopropanol, n -butanol, isobutanol , n -pentanol, isopentanol, acetone, ethyl acetate , acetonitrile , 2-butanone, 2-pentanone, methyl acetate , ethyl formate and tetrahydrofuran was obtained over a temperature range from 273.75 K to 324.95 K by a gravimetric method under atmospheric pressure. For all the solvents investigated, the equilibrium solubility of 2-phenylacetamide increases with augmented temperature. The statistical correlations were correlated by the modified Apelblat model, λh equation, non-random two-liquid (NRTL) equation and the Wilson equation. On the basis of thermodynamic relations and the Wilson model, the dissolution enthalpy, entropy, and Gibbs free energy were calculated. The results demonstrate that the dissolution of 2-phenylacetamide is a spontaneous and entropy-driven process in the selected solvents. The solubility data, correlation models and derived dissolution properties would promote the development of the separation and reaction of 2-phenylacetamide in industry.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROPHORESIS
·
2019
·
IF 2.754
Yuan-Yuan Cui,Huan Yao,Cheng-Xiong Yang,Xiu-Ping Yan
Microporous organic networks (MONs) are a new class of porous materials synthesized via Sonogashira coupling reactions between organic building blocks. Here we report an in situ synthesis approach to fabricate MONs coated capillary column for high resolution GC separation of hydrocarbons. The McReynolds constant evaluation reveals the MONs coated capillary is a non-polar column. The MONs coated capillary column shows good resolution for GC separation of diverse important industrial hydrocarbons such as linear and branched alkanes, alkylbenzenes, pinene isomers, ethylbenzene and styrene, cyclohexane and benzene. The MONs coated capillary column gave a high column efficiency of 1542 plates per meter for hexane and good precision for replicate separations of the selected hydrocarbons with the RSDs of 0.2–0.3, 1.5–3.1, and 1.9–3.3% for retention time, peak height and peak area, respectively. The MONs coated capillary also offered better resolution than commercial Inert Cap-1 and Inert Cap-5 capillary columns for hexane and heptane isomers. These results reveal the potential of MONs as novel stationary phases in GC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2018
·
IF 2.196
Chao Guo,Yangtong Tan,Yu Qian,Siyu Yang
Experimental liquid–liquid equilibria (LLE) data for ternary (methyl propyl ketone + hydroquinone + water) and (methyl propyl ketone + resorcinol + water) systems were determined under atmospheric pressure at T = 298.15, 318.15, and 333.15 K. Distribution coefficients and separation factors were calculated to evaluate extraction effectiveness. Hand, Bachman, and Othmer–Tobias equations were utilized to confirm consistency of experimental LLE data. Thermodynamic NRTL and UNIQUAC models were used to correlate experimental LLE data, and corresponding binary interaction parameters were obtained. The estimated data from the two models agree well with experimental LLE data. The NRTL model gives a better agreement than the UNIQUAC model for ternary (methyl propyl ketone + hydroquinone or resorcinol + water) systems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2018
·
IF 2.196
Yangtong Tan,Chao Guo,Yu Qian,Siyu Yang
Liquid–liquid equilibrium (LLE) data for the ternary system of (2-pentanone + catechol + water) and (mesityl oxide + catechol + water) was measured under atmospheric pressure at T = (298.2, 318.2 and 333.2) K. The distribution coefficients and separation factors were employed to assess the efficiency of extracting catechol from water. The nonrandom two liquid and universal quasichemical models were applied to correlate the LLE data, and the corresponding binary interaction parameters were obtained. The topological analysis of LLE correlation was used to confirm that the parameters satisfy the Gibbs stability criteria.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2018
·
IF 3.716
Jianlin Peng,Meiling Qi
This work describes the investigation of utilizing a chain-typed thiophene-based π-conjugated polymer, i . e ., poly(3-hexylthiophene) (P3HT), as the stationary phase for gas chromatography (GC). The P3HT column was statically prepared and investigated for its column efficiency, polarity, separation performance, repeatability and thermal stability. As a result, it showed moderate polarity and column efficiencies of 3260, 3310 and 3790 plates/m for 1-octanol, naphthalene and n -dodecane, respectively. As evidenced, it exhibited high-resolution performance for aliphatic and aromatic isomers, including those critical pairs such as phenanthrene/anthracene and p -/ m -benzenediol isomers. Moreover, it displayed stronger retention for alkanes, alcohols and phenols in comparison to the polysiloxane stationary phase with close polarity. Also, the P3HT column had good repeatability and reproducibility with the RSD values less than 0.05% for run-to-run, 0.17–0.54% for day-to-day and 2.7–5.2% for column-to-column, and good thermal stability up to 260 °C. This work demonstrates the promising future of the thiophene-based polymer and its derivatives in separation science.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Frontiers in Nutrition
·
2025
·
IF 5.1
Qiaozhen Zhang,Yue Sun,Yahui Sun,Cui Guo,Jiayin Zhu,Xinkui Niu,Mingshuang Gao
Introduction: Potato chips are the primary product of the potato leisure food market. And the level of consumer preference is strongly influenced by their flavor.Methods: In this study, five potato chips were compared by combining their physicochemical properties, sensory characteristics, and volatile flavor compounds. The volatile flavor compounds in potato chips were evaluated using gas chromatography-ion mobility spectroscopy (GC-IMS).Results and discussion: GC-IMS identified 57 volatile flavor compounds, including 17 aldehydes, 9 esters, 10 ketones, 3 pyrazines, 12 alcohols, 3 acids, 1 pyridine, and 2 ethers. Moreover, the aldehydes had the largest relative amount and kind. Seven identical key volatile flavor compounds with ROAV ≥ 1 were examined in five potato chips. In addition, the variety of key flavor compounds with ROAV ≥ 1 was more abundant in Leshi (LS) industrial fresh-cut fried potato chips. While the types of key volatile flavor compounds in Leshi (LS) industrial fresh-cut fried potato chips and other composite potato chips varied, the types of key volatile flavor compounds in composite fried and baked potato chips made with various formulations were consistent. In the sensory evaluation, Shuyuan (SY) industrial composite potato chips and Shiyanshi (SYS) homemade composite baked potato chips were preferred overall. The Leshi (LS) industrial fresh-cut fried potato chips and Kebike (KBK) industrial composite fried potato chips had greater relative levels of harmful factors. But none of the potato chips included trans-fatty acids. The correlation heatmap showed that the harmful factors in potato chips were mainly positively correlated with volatile flavor compounds such as aldehydes and ketones originating from the oxidative degradation of fat.Conclusion: The study provided a reference for choosing appropriate process conditions in potato chip processing so that the safety of the food can be enhanced while obtaining consumer-preferred food flavors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Foods
·
2025
·Vol. 14
·期 6
·935
·
IF 5.1
Kun Tang,Cong Chen,Yutong Liu,Suxuan Li,Yiye Luo,Xiaoyu Chen,Zhiyong Wu
Pandan leaves have a prominent glutinous-rice aroma; however, few studies have explored their volatile aroma compound composition. Herein, the differences in the volatile aroma components of fresh and dried pandan leaves were investigated for the first time using HS–SPME–GC–O–MS combined with principal component analysis, orthogonal partial least squares discriminant analysis, and HS-GC-IMS with aroma fingerprinting. A total of 93 volatile compounds were identified, exceeding previous reports, including 43 main flavor components with odor activity values (OAV) > 1. OAV and aroma extract dilution analysis tests reveal 13 main aroma volatiles including 2-acetyl-1-pyrroline, hexanal, nonanal, phenylacetaldehyde, β-cyclocitral, butanal, ethyl caprylate, ethyl nonanoate, ethyl caprate, ethyl laurate, 3-hydroxy-2-butanone, acetophenone, and α-ionone. Sixteen types of aromas were classified, and the results are presented as flavor wheels. The findings of this study elucidate the changes and retention of aroma volatiles in differently processed leaves, which could benefit food industry applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Cell Reports Physical Science
·
2025
·
IF 7.3
Wenxuan Li,Jianjia He,Yilan Zhang,Le Ye,Guoying Yao,Zixuan Zhang,Shiang Li,Xinhui Lu,Haipeng Lu,Tao Zeng,Zhenyu Yang
Two-dimensional metal halide perovskites (TMHPs) have emerged as prominent semiconductor materials in optoelectronic devices due to their composition-dependent properties. While previous research has concentrated on the types and the lengths of cations affecting TMHPs, our study systematically explores a new series of Dion-Jacobson (DJ)-phase TMHP structures featuring dithioketal-containing organic cations. Through X-ray crystallography and spectroscopy analyses, we demonstrate that steric hindrance from longer-branched groups distorts the structures and influences the photophysical behaviors of TMHPs. Additionally, we observe thermodynamically driven transitions from the DJ phase to the Ruddlesden-Popper (RP) phase when incorporating cations with extended branches, further impacting their structural and optoelectronic characteristics. Understanding and controlling these structural changes enable the design of TMHPs with tailored properties, opening avenues for advanced materials that enhance device performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2016
·
IF 3.926
Yunzhong Zheng,Meiling Qi,Ruonong Fu
This work presents the first example of utilization of graphitic carbon nitride (g-C 3 N 4 ) as stationary phase for capillary gas chromatographic (GC) separations. The statically coated g-C 3 N 4 column showed the column efficiencies of 3760 plates/m and weak polarity. Its resolving capability and retention behaviours were investigated by using the Grob test mixture, and mixtures of diverse types of analytes, and structural and positional isomers. The results showed superior separation performance of the g-C 3 N 4 stationary phase for some critical analytes and preferential retention for aromatic analytes. Specifically, it exhibited high-resolution capability for aromatic and aliphatic isomers such as methylnaphthalenes and dimethylnaphthalenes , phenanthrene and anthracene and alkane isomers. In addition, g-C 3 N 4 column showed excellent thermal stability up to 280 °C and good repeatability with relative standard deviation (RSD) values less than 0.09% for intra-day, below 0.23% for inter-day and in the range of 1.9–8.4% for between-column, respectively. The advantageous separation performance shows the potential of g-C 3 N 4 and related materials as stationary phase in GC and other separation technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2016
·
IF 3.926
Jianlin Peng,Yan Zhang,Xiaohong Yang,Meiling Qi
Efficient separation of xylenes, phenols and anilines is a big issue in chemical and petroleum industries. This work presents the first example of employing poly (caprolactone) diol (PCL-Diol) as stationary phase for high-resolution gas chromatographic (GC) separations of these tough isomer mixtures. It showed medium polarity and stronger H-bonding basicity than H-bonding acidity. Impressively, PCL-Diol column exhibited extremely high resolving capability for the isomer mixtures of xylenes, cresols/xylenols, and toluidines/xylidines with good peak shapes. Moreover, it exhibited preferential retention for analytes of a linear alkyl chain, suggesting its shape fitting selectivity for specific analytes. In addition, its separation performance has good repeatability with RSD values on retention times below 0.01% for run to run ( n = 6), 0.67–0.80% for day to day ( n = 4) and 3.2–4.4% for column to column ( n = 4) repeatability, respectively. Furthermore, it was applied for the determination of isomer impurities in real samples, showing good potential for practical use. This work demonstrates the advantageous high-resolution separation performance for challenging isomers and shows its promising future of PCL-Diol-based materials in separation science.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2016
·
IF 3.926
Jianlin Peng,Yonggang Shi,Zhishuai Yang,Meiling Qi,Feng Wang
Dicyanuric-functionalized polycaprolactone (DPCL) was explored for its separation performance in gas chromatography (GC). The statically coated DPCL capillary column (0.25 mm, i.d.) showed column efficiency of 3460 plates/m determined by naphthalene at 120 °C. McReynolds constants and Abrahaḿs system constants were also determined to evaluate the polarity and possible molecular interactions of the stationary phase. As a result, DPCL column exhibited excellent separation performance for diverse types of analytes with good peak shapes. Most interestingly, it shows unique amphiphilic selectivity and high-resolution capability for both apolar to polar isomers. In addition, DPCL column had good column repeatability with the RSD values below 0.06% for run-to-run, 0.09–0.40% for day-to-day and 1.7–3.6% for column-to-column, and good thermal stability up to 280 °C. The high selectivity and resolving capability demonstrate the great advantages of the DPCL stationary phase for simultaneous determination of analytes of great variety in complex samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2017
·
IF 3.981
Qiaochu Zhang,Meiling Qi,Jinliang Wang
This work reports oligothiophene-functionalized truxene-based stationary phases (TTT, TDT and TFT) with a unique star-shaped π-conjugated architecture for gas chromatographic (GC) separations. They exhibited medium polarity and column efficiency of 3340–3760 plates/m determined by naphthalene at 120 °C. Among them, the TTT stationary phase displayed advantageous resolving capability over the TDT and TFT phases for a wide ranging analytes from apolar to polar, particularly for structural and positional isomers, including alcohols, phenols, halogenated and alkylated benzenes and naphthalenes. Moreover, the TTT column exhibited good thermal stability and repeatability with relative standard deviation (RSD) values of 0.02%–0.07% for run-to-run, 0.10%–0.53% for day-to-day and 2.1%–2.9% for column-to-column, respectively. In addition, it was applied for the determination of isomer impurities in real samples, proving its good potential for practical GC analysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）