Materials Today Bio
·
2022
·
IF 10.761
Qing Li,Wenbin Liu,Wen Hou,Xiaopei Wu,Wenying Wei,Jiawei Liu,Yihe Hu,Honglian Dai
The abundant neurovascular network in the periosteal fibrous layer is essential for regulating bone homeostasis and repairing bone defects. However, the majority of the current studies only focus on the structure or function, and most of them merely involve osteogenesis and angiogenesis, lacking an in-depth study of periosteal neurogenesis. In this study, a photothermal double-layer biomimetic periosteum with neurovascular coupling was proposed. The outer layer of biomimetic periosteum is a conventional electrospinning membrane to prevent soft tissue invasion, and the inner layer is an oriented nanofiber membrane to promote cell recruitment and angiogenesis. From the perspective of functional bionics, based on the whitlockite (WH) similar to bone composition, we doped Nd (the trivalent form of neodymium element) in it as the inducing element of photothermal response to prepare photothermal whitlockite ( [email protected] ). The sustained release of Mg 2+ in [email protected] can effectively promote the up-regulation of nerve growth factor (NGF) and vascular endothelial growth factor (VEGF). The release of Ca 2+ and PO 4 3− ions and photothermal osteogenesis jointly promote bone regeneration. Under the combined effect of structure and function, the formation of nerves, blood vessels, and related collagens greatly simulates the microenvironment of extracellular matrix and periosteum regeneration and ultimately promotes bone regeneration. In this study, physical and chemical characterization proved that the bionic periosteum has good flexibility and operability. The in vitro cell experiment and in vivo calvarial defect model verified that PPCL/ [email protected] biomimetic periosteum had excellent bone tissue regeneration function compared with other groups. Finally, PPCL/ [email protected] provides a new idea for the design of bionic periosteum.
研究领域:
生物医学工程
·
组织工程
·
生物材料
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD HYDROCOLLOIDS
·
2024
·
IF 11
Lechuan Wang,Xiaoyi Cheng,Hanying Lan,Longwei Jiang,Xiuqing Liu,Jianfei Pei,Ming Zhang,Qiuping Zhong,Weijun Chen,Wenxue Chen,Haiming Chen
While both protein-polysaccharide complexes and continuous phase gelation showed great potential for stabilizing high internal phase Pickering emulsions (HIPPEs), it is not known which strategies are more effective and adaptive. In this work, HIPPEs gel was prepared by Ca 2+ -induced continuous phase gelation of ovalbumin (OVA)-low methoxyl pectin (LMP) electrostatic complexes particles (OLECP)-stabilized HIPPEs. The microstructure, rheological properties, stability, and application of HIPPEs and HIPPEs gel were systematically investigated and compared at different LMP concentrations. The results showed that, compared to HIPPEs, continuous phase gelation effectively improved the viscoelasticity, water binding capacity, and hardness of HIPPEs gel due to its robust and developed interface architecture. CLSM and cryo-SEM observations revealed that OLECP interconnected with each other in the continuous phase to form an advanced network architecture in HIPPEs. Whereas, a firm gel network structure and a thick interfacial layer were found in HIPPEs gel. More importantly, with increasing pectin concentration, the cross-linking phenomenon of OLECP mainly at the interface, transformed into the gelation behavior of excess pectin molecules dominating in the continuous phase. LMP contributed to the formation of a finer 3D gel network structure and a firmer interfacial layer, providing a smaller oil droplet size and superior stability for HIPPEs gel. The photochemical stability of curcumin was increased from 16.1 ± 1.5 % to 93.7 ± 2.2 % after encapsulation in HIPPEs gel. In vitro digestion results testified that HIPPEs gel (10:15, w/w) can promote fat hydrolysis (from 32.35 ± 3.06 % to 45.52 ± 2.75 %) and enhance the bioaccessibility of curcumin (from 20.1 ± 1.5 % to 32.8 ± 2.6 %) compared to bulk oil. Besides, compared with HIPPEs, HIPPEs gel showed poor printability because of improper printing adaptability and liquidity. In a nutshell, our work provides valuable information for developing novel HIPPEs gels for various food applications.
研究领域:
食品科学
·
材料科学
·
化学工程
·
胶体与界面科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Lu Liu,Enling Hu,Haoyu Qiu,Qian Xu,Kun Yu,Ruiqi Xie,Fei Lu,Qi Wang,Bitao Lu,Qing Li,Guangqian Lan
Skin wound healing in dynamic environments remains challenging. Conventional gels are not ideal dressing materials for wound healing due to difficulties in completely sealing wounds and the inability to deliver drugs quickly and precisely to the injury. To tackle these issues, we propose a multifunctional silk gel that rapidly forms strong adhesions to tissue, has excellent mechanical properties, and delivers growth factors to the wound. Specifically, the presence of Ca 2+ in the silk protein leads to a solid adhesion to the wet tissue through a chelation reaction with water-trapping behavior; the integrated chitosan fabric and CaCO 3 particles ensure enhanced mechanical strength of the silk gel for better adhesion and robustness during wound repair; and the preloaded growth factor further promoted wound healing. The results showed the adhesion and tensile breaking strength were as high as 93.79 kPa and 47.20 kPa, respectively. MSCCA@CaCO 3 -aFGF could remedy the wound model in 13 days, with 99.41 % wound shrinkage without severe inflammatory responses. Due to strong adhesion properties and mechanical strength, MSCCA@CaCO 3 -aFGF can be a promising alternative to conventional sutures and tissue closure staples for wound closure and healing. Therefore, MSCCA@CaCO 3 -aFGF is expected to be a strong candidate for the next generation of adhesives.
研究领域:
生物医学工程
·
材料科学
·
组织工程
·
伤口愈合
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jingjing Yuan,Menghan He,Jueying Yang,Kang Li,Kexiang Fan,Hang Luo,Bo Li,Yu Chen
Femur fracture becomes increasingly common due to global population aging. Intramedullary nailing, a widely used treatment for fractures, tends to damage the blood vessels in the bone marrow cavity, which causes substantial hidden bleedings. The application of hydrogels to intramedullary nail hemostasis is limited by the challenges in balancing the adhesion, mechanical strength, and toughness. Inspired by the multi-network structure of snail mucus, which offers strong adhesion in harsh environments via adaptive wet-state contact followed by tight fitting upon dehydration, we developed a dual-network carboxymethyl chitosan (CMCS)-gluconic acid δ-lactone (GDL)-Ca 2+ /polyacrylamide (PAM) (CGC/P) hydrogel. The integration of GDL with CMCS introduces hydroxyl groups to enhance the adhesion of hydrogel and regulated system pH to facilitate the formation of the dynamic CMCS-GDL-Ca 2+ physical crosslinking network. The chemically crosslinked PAM network further improves the strength and toughness of the hydrogel. As the adhesion strength of the hydrogel can be increased by up to 50.14 times upon dehydration, a stretch-winding and dehydration method is developed to coat intramedullary nails with controllable thickness, effective hemostatic properties, excellent mechanical and adhesion characteristics. In rabbit femoral intramedullary nailing surgery, this system achieves rapid hemostasis and greatly promotes osteogenesis. Our study simultaneously improves the performance regulation contradiction of hydrogel coating, providing a crucial support to promote the application of hemostatic coatings to implantations.
研究领域:
生物医学工程
·
材料科学
·
组织工程
·
骨科
·
生物材料
✓ 已验证
产品关联
DOI
高影响因子
Bio-Design and Manufacturing
·
2022
·Vol. 5
·期 3
·540-555
·
IF 5.887
Sun Yage,Gao Ziwei,Zhang Xiaoping,Xu Ziyang,Zhang Yahan,He Binbin,Yang Rong,Zhang Qian,Yang Qiang,Liu Wenguang
Periosteum, a membrane covering the surface of the bone, plays an essential role in maintaining the function of bone tissue—and especially in providing nourishment and vascularization during the bone regeneration process. Currently, most artificial periostea have relatively weak mechanical strength and a rapid degradation rate, and they lack integrated angiogenesis and osteogenesis functions. In this study, a bi-layer, biomimetic, artificial periosteum composed of a methacrylated gelatin–nano-hydroxyapatite (GelMA-nHA) cambium layer and a poly (N-acryloyl 2-lycine) (PACG) -GelMA-Mg 2+ fibrous layer was fabricated via 3D printing. The GelMA-nHA layer is shown to undertake the function of improving osteogenic differentiation of rat bone marrow mesenchymal stem cells with the sustainable release of Ca 2+ from nHA nanoparticles. The hydrogen-bonding-strengthened P(ACG-GelMA-L)-Mg 2+ hydrogel layer serves to protect the inner defect site and prolong degradation time (60 days) to match new bone regeneration. Furthermore, the released magnesium ion exhibits a prominent effect in regulating the polarization phenotype of macrophage cells into the M2 phenotype and thus promotes the angiogenesis of the human umbilical vein endothelial cells in vitro. This bi-layer artificial periosteum was implanted into a critical-sized cranial bone defect in rats, and the 12-week post-operative outcomes demonstrate optimal new bone regeneration. Graphic abstract
研究领域:
生物医学工程
·
组织工程
·
生物材料
·
再生医学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）