JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Lijun Guo,Feifei Li,Jianxin Liu,Rui Li,Zhuobin Yu,Qing Xi,Lulu Zhang,Yaru Li,Caimei Fan
Morphology regulation is a simple way to improve photocatalytic activity. In this work, a MIL-101(Fe) photocatalyst with cracked spindle morphology has been successfully prepared by EG pre-coordination solvothermal method . The cracking degree of MIL-101(Fe) can be regulated by adjusting pre-coordination time. The MIL-101(Fe) with the optimal uniform crack displays a best NH 3 evolution rate of 592 μmol h −1 g −1 under the visible light irradiation . Cracked MIL-101(Fe) is similar to a semi-exposed model, which can increase the number of reactive sites, improve refraction and reflection of light, and ultimately enhance the photocatalytic nitrogen fixation activity. This work developed a convenient strategy to improve the photocatalytic activity of nitrogen reduction by controlling morphology.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
DOI
高影响因子
WATER ENVIRONMENT RESEARCH
·
2017
·Vol. 89
·期 7
·614-621
·
IF 0.91
Xinxin Yue,Weilin Guo,Xianghui Li,Xiaomei Gao,Guangyou Zhang
In this study, a novel composite containing an iron based metal-organic framework (MOF) and BiOBr was successfully synthesized by a simple method, and was fully characterized by X-ray diffraction patterns, Fourier transform infrared spectra, UV-vis diffuse reflectance spectra, and transmission electron microscopy. Moreover, the photocatalytic activities of BiOBr/MIL-88B(Fe) composites and the pure materials were evaluated by measuring the degradation of Rhodamine B under visible light. The results show that the composite exhibits better photocatalytic activities than pure materials, which can be ascribed to the high adsorption capacity of MIL-88B(Fe) and the enhanced separation of photogenerated charge carriers from assembly of MIL-88B(Fe) on BiOBr. And the effects of various operating parameters such as catalyst dosage, medium pH, the mass ratio of BiOBr, and MIL-88B(Fe) and the dye initial concentration on the degradation of RhB have been studied.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2019
·
IF 1.795
Jianhua Liu,Yumei Wang,Hao Guo,Songjie Fan
A novel heterogeneous membrane-MIL-121/118 were successfully synthesized on the surface of macroporous glass frits by increasing the content of aluminum nitrate in the starting solution. For the gas mixtures of H 2 /CO 2 , H 2 /CH 4 and H 2 /N 2 , the membrane exhibits permselectivity towards H 2 . Specifically, the separation factors are 10.7, 8.9 and 7.5 respectively with average H 2 permeance of 7.83 × 10 −8 mol·m −2 ·s −1 ·Pa −1 . As far as we know there is no report of any heterogeneous MOF membranes and the diversity of membrane structure certainly facilitates its versatility.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
CANADIAN JOURNAL OF CHEMICAL ENGINEERING
·
2022
·Vol. 101
·期 6
·3262-3272
·
IF 2.5
Dongmei Jia,Jia Guo,Jing Li,Yongzheng Duan
The composite of CuO coated MIL-101(Fe) (CuO@MIL-101(Fe)) was successfully prepared using a one-pot hydrothermal technology. X-ray diffraction (XRD), Fourier transform infrared spectrum (FTIR), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET), and TG technologies were used to characterize its structural, morphological, and physicochemical properties. CuO@MIL-101(Fe) exhibited a better pH adaptivity, a faster removal ratio of 95.8% for glyphosate within 10 min at pH 7, and a higher selectivity of adsorption capacity, even reaching 231.6 and 233.5 mg g −1 with coexisting Cl − (10 mmol L −1 ) and SO 4 2− (10 mmol L −1 ). The enhanced adsorption performances of CuO@MIL-101(Fe) may be caused by Cu forming a coordination interaction with glyphosate. A possible mechanism of glyphosate removal was discussed on the basis of the FTIR and X-ray photoelectron spectroscopy (XPS) analysis. CuO@MIL-101(Fe) composite would be more favourable to capture glyphosate from wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2024
·
IF 3.7
Chunlong Qiu,Haiyang Sun,Yeyang Ni,Zhenjiang Dou,Ming Xia,Zhaoyang Fei,Zhuxiu Zhang,Mifen Cui,Qing Liu,Xu Qiao
The impressive water stability demonstrated by MIL-101(Cr) highlights its considerable potential for the effective elimination of organic contaminants from wastewater. Nevertheless, the limited availability of adsorption sites within MOFs leads to an unsatisfactory capacity for tetracycline (TC) adsorption. In this case, the lanthanum modified MIL-101(Cr) porous adsorbents, termed as nLa-MIL-101(Cr), were successfully synthesized using a post-synthetic modification method. Through various characterization analyses, it was confirmed that lanthanum exists in the form of La(OH) 3 within the adsorbents, and all adsorbents also preserved the original structure as MIL-101(Cr). The results of static adsorption experiments demonstrated that, compared to the original material, the adsorption capacity of 1La-MIL-101(Cr) for TC increased by 3.5 times. Further experiments demonstrated that the adsorbent exhibits remarkable ion interference resistance and cycle stability. Finally, based on X-ray photoelectron spectroscopy, the adsorption mechanism was primarily attributed to the coordination between TC molecules and metals active site, while electrostatic interactions also played a significant role in the process. This study has developed a highly efficient adsorbent for the treatment of TC-contaminated wastewater, which reflects promising practical application prospects.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Lei Ma,Feifei Zhang,Kunjie Li,Yingying Zhang,Zhiqiang Song,Li Wang,Jiangfeng Yang,Jinping Li
The capture of N 2 O from CO 2 by an adsorption-based mechanism remains a significant challenge due to their similar molecular sizes and physical properties. Although substituent engineering has been widely employed for the selectivity regulation and improvement of gas mixtures in metal-organic frameworks, its effect on N 2 O/CO 2 separation has yet not been explored. Herein, four isoreticular MTN-type metal-organic frameworks (MOFs) with different substituents (-H, –NH 2 , -Br or –NO 2 ) are reported for the capture of N 2 O from a N 2 O/CO 2 mixture. As revealed by isothermal measurements, thermodynamic studies and ideal adsorbed solution theory computations, the N 2 O/CO 2 separation potential can be effectively improved by an electron-donating group (-NH 2 ), whereas electron-withdrawing groups (-NO 2 or -Br) exhibit the opposite effect. Notably, MIL-101(Cr)–NH 2 exhibits, by far, the highest ideal adsorbed solution theory equilibrium adsorption selectivity of 1.91 for 50/50 N 2 O/CO 2 . The N 2 O/N 2 separation ability of the modified materials is also studied and functionalization with a -Br group yields an improved separation potential compared to the parent MIL-101(Cr) material. The strategy of using substituents to enhance the N 2 O/CO 2 separation efficiency of MOFs could also be extended to other porous materials for chemical separation processes.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2025
·
IF 6.7
Chengzhuo Yu,Jin Xu,Li Xiong,Yarui Wang,Silong Wang,Fanglan Geng,Zesen Shang,Huasheng Wu,Lixia Zhao,Yawei Wang
Luminol-based chemiluminescence (CL) systems, as a powerful tool for bioanalysis, are limited owing to their weak CL intensity and self-decomposition of the classic oxidant H2O2. Herein, we introduced a new luminol CL enhancer, the natural light-driven photocatalyst MIL-100(Fe)/TiO2, for the selective determination of dopamine (DA). By employing MIL-100(Fe)/TiO2 for the first time as an efficient enhancer, the MIL-100(Fe)/TiO2-luminol CL intensity was 100 times higher than that of the classical H2O2-luminol system. The CL spectrum, UV–vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance spectroscopy were utilized to investigate the possible CL mechanism of the MIL-100(Fe)/TiO2-luminol system. All of the results indicated that MIL-100(Fe)/TiO2 can generate reactive oxygen species under mild natural light, which could react rapidly with the luminol anion radical and result in direct CL emission. The sensitive plate for DA was developed based on its inhibiting effect on CL intensity, and the linear range between CL intensity and DA concentration was 100 nM–1000 μM with a detection limit of 16.7 μM (S/N = 3). This study successfully achieved a stable reactant that can directly trigger the CL of luminol without the need for additional oxidizing agents under mild natural light and offers new possibilities for photoinduced amplification technology.
研究领域:
分析化学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2023
·Vol. 13
·期 14
·2072
·
IF 5.3
Xu Zhang,Bo Tian,Zhiheng Ma,He Wang,Zhixuan Cheng,Jiaqiang Xu
As a volatile air pollutant, formaldehyde can enter people’s living environment through interior decoration, furniture and paint, causing serious harm to human health. Therefore, it is necessary to develop a sensor for the real-time detection of formaldehyde in low concentrations. According to the chemical interaction between amino groups and formaldehyde, a MIL-101(Cr) aminated-material-based formaldehyde cantilever sensor was prepared, of which ethylenediamine- functionalized MIL-101(Cr) named ED-MIL-101(Cr)) showed the best gas sensing performance. Using quasi-in situ infrared spectroscopy, ED-MIL-101(Cr) was found bound to formaldehyde through a Schiff base. The adsorption enthalpy of formaldehyde-bound ED-MIL-101(Cr) was −52.6 kJ/mol, which corresponds to weak chemical adsorption, so the material showed good selectivity. In addition, ED-MIL-101(Cr) has the most active sites, so its response value to formaldehyde is larger and it takes longer to reach saturation adsorption than bare MIL-101(Cr). Through the research on the gas sensing performance of functionalized MIL-101(Cr) material, we found that it has a strong application potential in the field of formaldehyde monitoring, and the material performance can be quantitatively and accurately evaluated through combining calculation and experimentation for understanding the gas sensing mechanism.
研究领域:
材料科学
·
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2024
·
IF 3.8
Yixuan Liu,Jiamin Wei,Qi Zong,Chaoyue Chen,Tinghai Yang,Weiqiao Liu
Constructing cost-efficient and robust Fe-MIL-based photocatalysts for efficiently photodegrading antibiotics is highly appealing, however, their intrinsic defects, particularly unsatisfied visible light harvesting efficiency and rapid recombination of charge carriers, provide significant challenges. Herein, oxygen-vacancy-rich Bi 2 WO 6 -OVs/NH 2 -MIL-88B (Fe) composites were successfully constructed via a two-step approach consisting of a hydrothermal reaction followed by NaBH 4 treatment. The chemical compositions, microstructure, morphology, as well as optical properties of the as-prepared samples were thoroughly established. The optimized Bi 2 WO 6 -OV(40)/NH 2 -MIL-88B(Fe) photocatalyst exhibited the maximum photocatalytic efficiency (95.3 %) for the photodegradation of Norfloxacin (NOR), which was considerably greater than that of the heterostructure (56.9 %). The enhancement of photocatalytic performance can be attributed to the collaborative effect between oxygen vacancies and hybrid heterojunctions, which jointly enhances photoexcited electron generation and accelerates charge transfer. Furthermore, from the perspective of practical applications, the effects of pH, NOR concentration, and photocatalyst reuse were carefully investigated. The radical trapping experiments and ESR results verified that superoxide radicals (•O 2 − ), holes (h + ), and hydroxyl radicals (•OH) were the main active species in the NOR degradation process, and the possible photocatalytic mechanism was speculated accordingly. This research provides a promising approach to fabricating Fe-MOF-based heterojunctions with surface oxygen vacancy defect modification for the photodegradation of antibiotics.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2025
·
IF 3.9
Guang Lu,Lunqiu Zhang,Jiling Liang,Wei Li,Zheng Li,Xuejun Zou,Xiaodong Zhang
Herein, first, MIL-125 samples were synthesized via a hydrothermal method. Then, Ag species were doping on the surface of MIL-125 samples via the photolysis of silver nitrate. Finally, the Z-scheme MIL-125/Ag/BiOBr composite was synthesized via a directed liquid assembly method. The structure, morphology, and optical properties of the prepared samples were investigated via X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopic mapping, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, N2 adsorption–desorption analysis, ultraviolet–visible spectroscopy, photoluminescence spectroscopy, surface photovoltage analysis, transient photocurrent response analysis, electrochemical impedance spectroscopy, and electron spin resonance analysis. Photocatalytic experiments indicated that the photocatalytic Cr6+ reduction efficiency of MIL-125/Ag/BiOBr heterojunctions was 85.7% at pH = 6, which was approximately 5.5 and 2.2 times higher than that using BiOBr and MIL-125 alone, respectively. This performance was attributed to the intimate interfacial contact between MIL-125 and BiOBr and the doping of Ag species, which increased the transfer and separation of photogenerated carriers and inhibited the recombination of electrons and holes. Furthermore, the possible photocatalytic Cr6+ reduction mechanism of the Z-scheme MIL-125/Ag/BiOBr photocatalyst was proposed.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Processes
·
2021
·Vol. 9
·期 12
·2195
·
IF 2.847
Yi Qian,Haoyan Fu,Long Li,Wenyuan Su,Jiayin Li,Yihao Zhang
Due to the widespread use of antibiotics in medical treatment, animal husbandry and aquaculture, a large number of antibiotics are discharged into the environment as metabolites or in their original state, causing pollution to water bodies, which is a serious issue. In this study, a novel nanocomposite adsorbent MIL-53/D201 was successfully prepared by hydrothermal synthesis. This approach overcomes the disadvantage of easy dissociation of MOF material in the water phase and realizes the efficient removal of antibiotic azlocillin sodium in water. The crystal morphology and basic structure of the composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy scattering spectroscopy (EDS), and specific surface area and porosity analyzer (BET). The results showed that MIL-53 was successfully synthesized in situ in D201. The results of adsorption experiments show that the maximum saturated adsorption capacity of the composite is 122.3 mg/g when the dosage of the composite is 1.0 g/L. Compared with pure MIL-53 material, the composite material exhibits greater stability and efficient adsorption performance for target pollutants at different pH values. The adsorption process accords with the quasi-second-order kinetic adsorption model and Langmuir adsorption isothermal model. After five cycles of adsorption and desorption, the removal rate of MIL-53/D201 to azlocillin sodium was still above 87%.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2017
·
IF 3.33
Bo Xu,Zhiming Chen,Bing Han,Cuncheng Li
This work presents MIL-100(Fe) nanoparticles synthesized using glycol with uniform size and morphology. This is the first report of nanoscale MOFs material synthesized using glycol. The MIL-100(Fe) particles have been characterized by SEM, TEM, XRD and the results indicate that the MOFs particles show monodispersed nanospherical morphology. Photocatalytic study reveals that the MIL-100(Fe) nanospheres exhibit good oxidation ability of benzene to phenol under visible light irradiation with high selectivity.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）