ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Yingnan Zhu,Jiahang Si,Tiantian Xu,Lan Zheng,Xinyu Xiao,Xiaohan Sun,He Ding,Yuze Dong
Chemodynamic therapy (CDT) and photodynamic therapy (PDT) have emerged as promising strategies for treating skin abscesses. However, their therapeutic efficacy is fundamentally constrained by the hypoxic and hydrogen peroxide-deficient microenvironment characteristic of abscesses. Herein, we developed a near-infrared (NIR) light-responsive nanoplatform (ICG/CuO2@PCM) by encapsulating copper peroxide (CuO2) and indocyanine green (ICG) within a phase-change material (PCM), which enables control over self-supplied H2O2/O2 release via an NIR-triggered cascade. Upon irradiation, ICG-mediated photothermal conversion elevates the temperature beyond the PCM melting threshold, triggering a burst release of CuO2 and ICG. CuO2 generates hydroxyl radicals (•OH) through a Fenton-like reaction in the acidic wound microenvironment. Additionally, CuO2 can thermally decompose under photothermal conditions to produce a sustained oxygen supply, which ICG immediately converts into singlet oxygen (1O2), thereby enhancing PDT efficiency. Furthermore, photothermal therapy not only enhances the efficiency of CDT but also provides additional antibacterial support. Remarkably, ICG/CuO2@PCM (NPs), coupled with irradiation, accelerate abscess wound recovery by dispersing biofilm, killing bacteria, and promoting macrophage polarization toward an anti-inflammatory phenotype. Overall, this NIR-responsive nanoplatform highlights the promise in controlled modulation of microenvironment-adaptive antimicrobial strategies to overcome current limitations of hypoxic infections.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy Materials
·
2025
·Vol. 5
·期 11
·N
·
IF 11.2
Shukai Liu,Huang Tan,Gaole Dai,Shiyun Xiong,Yu Zhao,Benxia Li
The oxygen evolution reaction (OER), as a pivotal process in electrochemical water splitting, directly determines energy conversion efficiency. Ruthenium (Ru)-based catalysts have gained considerable attention in recent years due to their decent intrinsic activity in acidic media. Previous studies have demonstrated that while Ru exhibits superior OER activity compared to RuO2 in acidic environments, its operational stability remains markedly inferior. This performance dichotomy, coupled with the persistent challenges of active species dissolution and catalyst particle aggregation during prolonged operation, significantly hinders their practical implementation in electrochemical systems. To address these challenges, this study develops a carbon nanotube (CNT)/Fe-Ni@RuO2@PANI-350 composite catalyst composed of RuO2 nanoparticles supported on bimetallic Fe-Ni modified CNTs (CNT/Fe-Ni) and encapsulated with polyaniline (PANI). This catalyst utilizes the anchoring effect of bimetallic Fe-Ni sites and the spatial confinement effect of PANI coating layer, effectively inhibiting the dissolution and agglomeration of RuO2 during both high-temperature processing and electrochemical operation, thereby significantly enhancing electrochemical stability. The anchoring strength of RuO2 nanoparticles on CNT/Fe-Ni support via the nano-confinement effect, as well as the microscopic mechanisms underlying the performance enhancement, are revealed by density functional theory calculations and experimental characterizations. The composite catalyst demonstrates fascinating OER performance in 0.5 M H2SO4, exhibiting a low Tafel slope of 39.1 mV dec-1 as well as low overpotentials of 188 and 225 mV at current densities of 10 and 100 mA cm-2, respectively. Remarkably, the composite catalyst demonstrates significantly enhanced stability, exhibiting only ~30 mV overpotential increase during 150 h continuous operation at 10 mA cm-2. This study highlights a simple yet effective nano-confinement strategy to address the challenges of Ru-based catalysts, and provides a practical paradigm for designing and preparing highly efficient OER electrocatalysts with enhanced stability.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Cailiang Yue,Yukun Tian,Linlin Zhu,Nan Sun,Zhiqi Zhou,Fuqiang Liu,Yifei Sun
Photocatalytic 1 O 2 generation has emerged as a promising technology for environmental remediation and organics synthesis. Nevertheless, the efficiency of photocatalytic 1 O 2 generation via O 2 activation through charge-transfer mechanism remains challenging in carbon nitride due to the weak dielectric screening effect. Herein, series of uric acid (UA)-modified ultrathin carbon nitride nanosheets (UCN-x) were fabricated by the simple supramolecular self-assembly process. Comprehensive characterizations revealed that the incorporation of UA pigment would induce purine structure into heptazine skeleton. Photocatalytic experiments showed that the modification of UA greatly enhanced photocatalytic 1 O 2 generation ability. The optimal UCN-2 exhibited superior photocatalytic degradation of tetracycline (TC) with the normalized TC degradation rate up to 10.03 mg TC g cat −1 min −1 , which was 2.1–31.1 times as high as that of reported photocatalysts. What's more, UCN-2 exhibited excellent photocatalytic TC degradation across diverse aqueous conditions, demonstrating significant potential in environmental remediation. Time-dependent density functional theory (TD-DFT) calculation revealed that the doping of UA could trigger the spatial separation of h + /e − distribution, with h + concentrated in UA pigment and e − concentrated in adjacent heptazine ring. The engineered adjacent redox sites were precisely tailored to align with the charge-transfer mechanism for photocatalytic 1 O 2 generation. This work established a fundamental framework for designing highly efficient photocatalysts with manipulated O 2 activation.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2021
·Vol. 9
·期 8
·4880-4889
·
IF 12.732
Wei Wu,Wang Lin,Hongjiang Chen,Keyan Wei,Zhitong Li,Haitao Yang,Mingxian Liu,Huaicheng Xiang,Libo Deng,Lei Yao
The development of high-performance solid-state batteries (SSBs) that integrate high safety with high energy density has long been pursued. However, conventional lithium-containing anode materials are unable to balance these two requirements, thereby necessitating the exploration of lithium-free anodes for SSBs. In the current study, a core–shell lithium-free α-Fe2O3@TiNb2O7 (TNO) nanofiber composite is synthesized and applied as an SSB anode. The confinement effect from the hollow TNO nanotubes on the encapsulated α-Fe2O3 nanoparticles can buffer the volume-change crushing during charging/discharging, leading to robust structural stability. Moreover, the high rate capability of TNO and high capacity of α-Fe2O3 work synergistically to provide superior electrochemical performances. The prepared α-Fe2O3@TNO composite delivers twice the reversible capacity (625 mA h g−1 at 0.1 A g−1) of pristine TNO as well as a remarkably prolonged cycle life (500 cycles with 79.2% capacity retention) and an improved rate performance (305 mA h g−1 at 3 A g−1) compared with those of α-Fe2O3, making this composite the most efficient TNO-based anode material ever reported. By pairing the composite with the high-energy Li[Ni0.8Co0.1Mn0.1]O2 (NCM811) cathode, the SSB full cell exhibits a high energy density of 400 W h kg−1. These results demonstrate the feasibility and great potential of the proposed lithium-free anode material in SSBs for practical applications.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
DOI
高影响因子
Catalysts
·
2025
·Vol. 15
·期 6
·545
·
IF 4
Xiaohong Yao,Jian Zhang,Chao Long
This study explored how pore size engineering in Nb-Mn/MCM-41 catalysts affects plasma-catalytic toluene oxidation. Adjusting the pore diameter (2.49–3.98 nm) modulated metal-support interactions and oxygen dynamics, with pore expansion to 3.73 nm (M3) optimizing the Mn4+/(Mn2++ Mn3+) ratio (XPS: 36.8%), the amount of lattice oxygen species (O2-TPD: 0.222 mmol/g), and crystallite size control (1.5 ± 0.2 nm, TEM). Smaller pores (M1: 2.49 nm) enhanced toluene adsorption but limited active site accessibility, while oversized pores (M4: 3.98 nm) reduced oxygen storage capacity (0.600→0.412 mmol/g). The Nb-Mn/M3 catalyst achieved superior performance with 96.8% toluene conversion, 55.0% CO2selectivity, and 85.4% carbon balance, while minimizing organic byproducts (GC-MS). Mechanistic studies revealed pore-mediated oxygen storage-transport cycles as critical for decoupling adsorption and oxidation steps. This study reveals fundamental mechanisms linking pore architecture to plasma-catalytic synergy in toluene oxidation, offering critical insights for the systematic design of energy-efficient, plasma-catalytic systems targeting industrial VOCs remediation.
研究领域:
催化化学
·
环境化学
·
材料科学
·
等离子体化学
·
纳米技术
·
表面科学
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2025
·
IF 4.2
Yu-Le Wang,Songhai Wu,Yu-Zhen Xu,Yu-Dong Shan,Yong Liu,Xu Han
The selective oxidation of cyclohexene (Cy) to cyclohexene oxide (Cy-ep) using O2 remains challenging due to low epoxidation selectivity. In this work, a series of Mo-doped TS-1 (Mo-TS-1) catalysts were successfully synthesized for the epoxidation of Cy under solvent- and initiator-free conditions with O2 as the oxidant. Among them, 5Mo-TS-1 exhibited high catalytic performance, achieving 43.5% Cy conversion and 50.6% selectivity toward Cy-ep. Additionally, valuable byproducts such as 2-cyclohexen-1-ol (Cy-ol) and 2-cyclohexen-1-one (Cy-one) were obtained with yields of 28.0% and 21.4%, respectively. Since both Cy-ol and Cy-one are valuable intermediates in fragrance synthesis, over 43.5% of Cy was effectively converted into high-value products. Quenching experiments and Raman spectroscopy revealed that surface oxygen vacancies (Ov) facilitate the activation of O2 to form ≡Ov‑superoxo species, which abstract hydrogen from the allylic C-H bond of Cy to generate 3-cyclohexenyl radicals (Cy•). These radicals subsequently react with O2 to form Cy-OO•, followed by hydrogen abstraction from another Cy molecule to yield 2-cyclohexene-1-hydroperoxide (Cy-OOH). A positive correlation between Cy-OOH and Cy-ep formation underscores the critical role of Cy-OOH in the epoxidation process. Furthermore, Raman spectroscopy confirmed the presence of ≡Mo-(η2-O2) peroxo species on the catalyst surface, which preferentially attack the C=C bond of Cy to form Cy-ep. DFT calculations elucidated two distinct O2 activation pathways: In Pathway I, O2 is activated at Ov sites to form ≡Ov‑superoxo, which subsequently reacts with Cy to generate ≡Ov‑peroxo, Cy-OOH, and Cy•. In Pathway II, Mo(V/VI) sites either directly activate O2 or react with peroxo intermediates (≡Ov‑peroxo or Cy-OOH) to form ≡Mo-(η2-O2). This species selectively epoxidizes the alkene bond in Cy to Cy-ep. Notably, the direct activation of O2 at Mo(V/VI) sites bypasses the allylic oxidation route, thereby enhancing the epoxidation selectivity beyond the theoretical limit of 50.0%. This study provides new insight on the importance of surface superoxo and peroxo mediated by Ov and Mo(V/VI) in the epoxidation processes.
研究领域:
催化化学
·
材料化学
·
绿色化学
·
多相催化
·
氧化反应
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Yang Zhan,Shun-zhi Yu,Shao-hua Luo,Jian Feng,Qing Wang
Transition-metal sulfides (TMS) are one of the most promising cathode catalysts for Li–O2 batteries (LOBs) owing to their excellent stabilities and inherent metallicity. In this work, a highly efficient mode has been used to synthesize Co@CNTs [pyrolysis products of metal–organic frameworks (MOFs)]-derived CoS2(CoS)@NC. Benefiting from the special yolk–shell hierarchical porous morphology, the existence of Co–N bonds, and dual-function catalytic activity (ORR/OER) of the open metal sites contributed by MOFs, the CoS2@NC-400/AB electrode illustrated excellent charge–discharge cycling for up to nearly 100 times at a current density of 0.1 mA cm–2 under a limited capacity of 500 mA h g–1 (based on the total weight of CoS2@NC and AB) with a high discharge voltage plateau and a low charge cut-off voltage. Meanwhile, the average transferred electron number (n) is around 3.7 per O2 molecule for CoS2@NC-400, which is the chief approach for a four-electron pathway of the ORR under alkaline media. Therefore, we believe that the novel CoS2@NC-400/AB electrode could serve as an excellent catalyst in the LOBs.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Ziling Wang,Xianzhu Peng,Shuai Guo,Mingjie Sun,Junfang Cheng,Lu Zou,Bo Chi,Jian Pu
Catalysts with high oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performances are crucial to the development of lithium-oxygen batteries (LOBs), which aim to promote Li2O2 deposition and decomposition and then avoid the active site passivation. Considering the metallic Ag possessing good electrical conductivity and excellent catalytic activity and perovskite oxides exhibiting high abundance, an easily tunable structure, and excellent intrinsically catalytic activity, we adopt the ultraviolet light to realize the deposition of Ag nanoparticles on the La0.6Sr0.4Fe0.9Mn0.1O3 (LSFM) substrate as a high-performance cathode for LOBs. The results confirm that the synergetic effect of Ag nanoparticle decoration and the La0.6Sr0.4Fe0.9Mn0.1O3 substrate could dramatically improve the electronic conductivity and ORR/OER kinetics of the nanohybrids. Ag@LSFM hybrids with abundant active sites and considerable electronic conductivity promote the deposition of a thinner discharge product film, and the corresponding LOBs deliver high discharge capacity (12 477 mAh g–1), a small gap between charge and discharge potentials (∼1.3 V), and high cycling stability (147 cycles). Overall, the study suggests that such a bifunctional catalyst is a promising candidate in LOBs.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2020
·Vol. 10
·期 24
·8445-8457
·
IF 5.721
Kun Liu,Yichen Zhao,Jiale Wang,Qingsong Xue,Guofeng Zhao
The fabrication of qualified catalysts is a key issue to implement gas-phase aerobic alcohol oxidation but necessarily requires understanding the structures of catalytic active sites and the supply of active oxygen species. Herein, we present one example of the Ag–CoO/Ti- powder catalyst for gas-phase benzyl alcohol aerobic oxidation. The first interesting observation is that the Ag–Co3O4 ensembles on the fresh catalyst could be transformed into Ag–CoO due to the presence of reductive benzyl alcohol. The preferred catalyst with 3 wt% Ag and 3 wt% CoO exhibits 93% benzyl alcohol conversion and 99% benzaldehyde selectivity at a weight hourly space velocity of 20 h−1 and a temperature of 240 °C. The structures of Ag–CoO ensembles and oxygen species supply were probed and identified by electron microscopy and other spectroscopy techniques in combination with temperature-programmed thermal analyses, pulse experiments, and kinetic studies. In nature, the oxygen species is generated at the Ag–CoO interfacial sites in the form of atomic oxygen with appropriate chemisorption strength on these sites to achieve a high oxidation activity of benzyl alcohol. Moreover, the Co3O4 ↔ CoO cycle is promoted by Ag at low temperature such as 240 °C to endow the Ag–CoO ensembles with excellent catalytic performance.
研究领域:
催化化学
·
材料科学
·
物理化学
✓ 已验证
DOI
高影响因子
Frontiers in Chemistry
·
2019
·
IF 3.782
Song Hongbing,Liu Zong,Gai Hengjun,Wang Yongjie,Qiao Lin,Zhong Caiyun,Yin Xiangyang,Xiao Meng
Introducing electron-rich nitrogen atoms to ordered mesoporous carbons (OMC) as supports for noble metal catalysts, not only improves the hydrophilic properties of a mesoporous carbon surface, but also enhances the coordination and binding abilities of metal ion. In the present work, nitrogen-doped ordered mesoporous carbons (NOMCs) were successfully fabricated via a facile hydrothermal self-assembly. The prepared NOMCs were characterized through powder X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption isotherm. The analyses demonstrated that the NOMCs prepared at a pyrolysis temperature of 750°C possessed an ordered 2D hexagonal mesoporous structure, a high graphitization degree, large surface area, and a well-distributed pore size. In particular, NOMCs could anchor Pd nanoparticles uniformly because of the introducing N atoms with strong electronegativity, which were selected as efficient catalysts for the partial oxidation of benzyl alcohol to benzaldehyde. Approximately 24.63% conversion with 85.71% selectivity to benzaldehyde was obtained without using any solvent by molecular O2 oxidation. Most importantly, the TOF value of the catalyst in the reaction system was up to 8698 h−1. After five runs reaction, TOF and selectivity of the catalyst remained essentially same. Hence, the proposed catalyst has a potential engineering application value.
研究领域:
材料科学
·
催化化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Feng Li,Yuhang Tian,Yanyun Sun,Peiyu Hou,Xianqi Wei,Xijin Xu
High-voltage and low-cost manganese-based P 2-type oxides show real promise as promising cathode for sodium-ion batteries (SIBs). But the P 2 − O2 phase transformation and Na + /vacancy ordering results in the inferior structural stability and Na + diffusion coefficient , which further leads to rapid decay of capacity and poor rate capability. Herein, in consideration of the synergetic effects of dual cationic doping, electrochemically inactive Li + and active Co 3+ codoping are proposed to solve the above issues. The novel two-step doping strategy, Co doping during synthesis of precursors via coprecipitation reaction followed by Li doping during solid-state reaction, are rationally developed. As anticipated, the Li/Co codoped P 2-type oxide exhibits the absence of P 2 − O2 phase transformation and Na + /vacancy disordering, which gives rise to an outstanding cycling stability (86.7% capacity retention within 100 cycles at 0.1C) and high-rate capability (reversible capacity of 109 mAh g −1 even at 10C). In addition, the full-cells composed of the codoped P 2-type positive and hard carbon negative show high energy-density, good lifespan and high-rate property. This proposed cationic codoping provides an effective and scalable tactics for modulating the structural properties of high-voltage P 2-type cathodes for advanced SIBs.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
KOREAN JOURNAL OF CHEMICAL ENGINEERING
·
2017
·Vol. 34
·期 12
·3132-3141
·
IF 2.007
Zhang Wei,Li Xin,Wang Hong,Song Yongji,Zhang Shenghong,Li Cuiqing
Deep desulfurization of model oil by photocatalytic air oxidation and adsorption using Ti (1− x ) M
x
O 2 (M=Zr, Ce) was investigated. Ti (1− x ) M
x
O 2 (M=Zr, Ce) was prepared by urea gelation/co-precipitation method, and characterized by N 2 adsorption, XRD and UV-vis spectra. UV irradiation greatly enhanced the adsorptive capacity and selectivity of TiO 2 -ZrO 2 for organosulfur in model oil because organosulfur compounds were first photocatalytically oxidized to sulfoxides and sulfones over TiO 2 -ZrO 2 , which were then selectively adsorbed on the bifunctional material due to much higher polarities of generated sulfoxides and sulfones. The Ti/Zr molar ratio and calcination temperature were optimized to 5 : 5 and 500 °C with the sulfur removal of 99.6% after reaction for 2 h under UV irradiation. After adding 25 wt% toluene into model oil, the sulfur removal could still reach 97.2% after reaction for 7 h. TiO 2 -ZrO 2 could be well regenrated by washing with acetonitrile followed by thermal treatment in air.
研究领域:
化学工程
·
环境科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）