Heliyon
·
2022
·
IF 3.776
Xuezhong Li,Yue Wang,Qi Guo
The porous iron-based metal organic frameworks (NH 2 -MIL-101(Fe)), which consists of 2-amino benzene dicarboxylic acid (H 2 BDC-NH 2 ) and ferrous ions were synthesized through one-step hydrothermal method. The surface area and pore volume of as-synthesized NH 2 -MIL-101(Fe) were 66.48 m 2 /g and 0.09 cm 3 /g, respectively. The excellent photocatalytic performance endows NH 2 -MIL-101(Fe) to generate hydroxyl radical ( OH), which then acting as efficiently active sites for azo dye degradation in wastewater. Meanwhile, the outstanding stability ability of NH 2 -MIL-101(Fe) indicates the potential candidate for wastewater treatment.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Danhua Guo,Huijun Li,Jiwei Wang,Zhouqing Xu
Leaching of fluoride in drinking water can lead to fluorosis. It is a good method to reduce the concentration of fluoride ion in drinking water by selecting the adsorption material with large adsorption capacity and good selectivity. Herein, the NH 2 -UiO-66 based loofah sponge modified porous composite was prepared. The composite material took loofah sponge (LS) as the carrier, and loaded NH 2 -UiO-66 on the surface of LS by in-situ growth method. The structure of the prepared NH 2 -UiO-66 @LS was investigated by PXRD , FTIR, SEM, and XPS. The influencing factors of different materials, contact time, adsorbent dosage, preliminary fluoride concentration, and co-existing anions were optimized. Compared with LS, the adsorption efficiency of NH 2 -UiO-66 @LS was greatly improved, and the adsorption capacity was 65.08 mg/g for fluoride ion. Moreover, the maximum removal efficiency of NH 2 -UiO-66 @LS was the initial fluoride concentration of 100 mg/L. Under the condition of the coexistence of other anions, the composite material has a specific adsorption performance for fluoride within 40 min. Furthermore, the data of fluoride adsorption was best fitted with pseudo-second-order kinetic model. The thermodynamic studies showed that the fluoride adsorption process on NH 2 -UiO-66 @LS was feasible, spontaneous and endothermic. In addition, synthesized NH 2 -UiO-66 @LS can be reused upto eight cycles. The plausible fluoride adsorption mechanism of NH 2 -UiO-66 @LS was majorly ruled by electrostatic attraction and complexation. Furthermore, the raw material is easy to obtain and the preparation process of NH 2 -UiO-66 @LS is simple. Hence, the large adsorption capacity of NH 2 -UiO-66 @LS compared with reported adsorbents for fluoride makes it have potential application prospect from wastewater on industrial scale.
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2020
·
IF 4.551
Hao Guo,Jiaqin Liu,Yanhong Li,Jürgen Caro,Aisheng Huang
Due to their rationally controlled pore size and easy functionalization, metal-organic frameworks (MOFs) are a promising candidate for membrane separation . As one of the most stable MOFs, UiO-66 has attracted intense attention for the preparation of molecular sieving membranes. A new post-synthesis modification (PSM) strategy was developed to enhance the separation selectivity of supported UiO-66-NH 2 membranes on porous ceramic tubes called UiO-66-NH 2 @SA by using salicylaldehyde (SA) modification. The mixed gas separation factors of H 2 /CO 2 and H 2 /CH 4 can be improved due to constrictions of the pore size through reaction of –NH 2 with SA giving iminophenol moieties. Notably, SA-modified UiO-66-NH 2 membranes are rather stable, at a high operation temperature of 200 °C and 1 bar, mixture separation factors of 11.3 for H 2 /CO 2 and 22 for H 2 /CH 4 can be obtained. Further, no obvious performance degradation has been observed after 3 months storing in air. This high stability of UiO-66-NH 2 @SA membrane could provide possibility for the industrial applications of hydrogen separation and purification.
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2021
·Vol. 37
·期 3
·512-521
·
IF 1.307
Cao Wenhao,Wang Caifeng,Wang Shuai,Zhang Yang,Zhao Ruisheng
I n view of the current living micro-environment and requirements of green economy, intelligent light-responsive humidification materials have become a hot spot in intelligent polymer materials. In this work, reversible photoresponsive films with a mechanical stability and an excellent humidity adjustment performance are developed by modifying epoxy-ether-spiropyran(EPESP) on amino-nanofibers(PAN-NH 2 ), which was produced through electrospinning. Such smart films for regulating wettability and micro-environment humidity can be reversibly manipulated by the simple switch of UV and visible light irradiation because of the unique transformation between polar ring-opened status and nonpolar ring-closed status of the spiropyran units. The effects of EPESP modification amount on the morphology, wettability, tensile strength and the ability to regulate humidity were investigated in detail. The results show that with the increase of modification amount of EPESP, both the humidity regulation and tensile strength increased; when the modification amount exceeds 7 mg, the range of regulating humidity increases slowly.
✓ 已验证
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2024
·
IF 7.2
Wei Zeng,Yao Tian,Xuehua Dong,Ling Huang,Hongmei Zeng,Zhien Lin,Guohong Zou
Birefringent crystals are extensively utilized across diverse optical applications due to their unique property of splitting incident light into dual refracted rays, thereby modulating and controlling light polarization. The pursuit of promoting the birefringence of such crystals to facilitate device miniaturization has recently emerged as a prominent area of focus. In this investigation, we introduce two molybdenyl iodates, namely, C(NH2)3MoO3(IO3) and Rb2MoO2(I2O6)(IO3)2, conceived through a “cation–anion synergetic interaction” strategy. Each compound exhibits a one-dimensional chain structure. Despite processing similar wide band gaps (3.33 and 3.22 eV), these materials display a variance in their birefringence (Δn = 0.426 and 0.261 @546 nm). Notably, C(NH2)3MoO3(IO3) showcases the highest birefringence among all hitherto reported molybdenyl iodates, signifying its potential as a high-performance birefringent crystal. Theoretical analyses indicate that the C(NH2)3+ cation, acting as a birefringence-active unit, significantly bolsters the birefringence of molybdate iodates. Moreover, the presence of extensive hydrogen-bonding interactions between C(NH2)3+ cations and iodates influences the orientation of the highly anisotropic iodates, thereby further enhancing the birefringence of C(NH2)3MoO3(IO3). This research paves the way for the future exploration of organic–inorganic hybrid molybdenyl iodates exhibiting exceptional optical performance.
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2021
·
IF 2.495
Ying-yue Qin,Qiao-ying Wang,Jin-Long Ge,Fang Wu
Amino-MIL-53(Al) (NH 2 -MIL-53(Al)) nanocrystals were successfully obtained through microwave ultrasound-assisted method. The structure and morphology of the as-synthesized NH 2 -MIL-53(Al) nanocrystals were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and N 2 adsorption–desorption isotherms, respectively. Upon excitation at 388 nm, the as-synthesized NH 2 -MIL-53(Al) nanocrystals show strong emission peak at 454 nm in n-octane solution at room temperature. Meanwhile, the fluorescence explorations revealed that NH 2 -MIL-53(Al) can selectively detect organosulfur compounds, including thiophene and benzothiophene through quenching effect in model fuel, with high quenching constant and low detection limit. This work presents a facile platform for the detection of organosulfur compounds in model fuel.
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Pei Jia,Kairong Yang,Jinjie Hou,Yuanyuan Cao,Xin Wang,Li Wang
The increasing deterioration of ecosystem derived from heavy metals residues brings about the environmental and food contamination , which presses the exploration of facile platform for monitoring heavy metals. Herein, a ratiometric fluorescence sensor was designed for Hg 2+ detection based on the compound of UiO-66-NH 2 and Ru(bpy) 3 2+ (Ru@UiO-66-NH 2 ) which was synthesized by situ encapsulation. The innovative composite displayed two emission peaks at 437 and 604 nm, and the addition of Hg 2+ could only quench the blue fluorescence due to static quenching and photo-induced electron transfer mechanism, providing an internal standard to promote the precision. Under optimal conditions, the ratiometric Ru@UiO-66-NH 2 probe revealed outstanding anti-interference capability and performed with a great limit of detection (LOD) of 0.053 μM for Hg 2+ , which was 2-fold lower than that of single-color UiO-66-NH 2 . By merit of Ru@UiO-66-NH 2 , test hydrogels were fabricated to provide a tactics for visual, rapid and on-site detection of Hg 2+ . Additionally, the dual-emitting sensing platform presented satisfactory recoveries and reliabilities in lake water, tap water , and drink water, demonstrating the application potential of this proposed ratiometric fluorescence sensor for monitoring Hg 2+ .
✓ 已验证
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2022
·
IF 8.008
Jiali Liu,Xianbiao Wang,Yangyang Zhao,Yongfei Xu,Yang Pan,Shaojie Feng,Jin Liu,Xianhuai Huang,Huanting Wang
Radioactive U(VI) in nuclear wastewater is a global environmental pollutant that poses a great threat to human health. Therefore, it is of great significance to develop a U(VI) sensor with desirable sensitivity and selectivity. Inspired by electron-donating group modification for enhancement of binding affinity toward U(VI), we report an amine group functionalization of UiO-66-NH2, using a low-cost, environmentally friendly, and low-temperature NH3 plasma technique as a fluorescence switching nanoprobe for highly sensitive and selective detection of U(VI). The resulting amine-functionalized UiO-66-NH2 (LTP@UiO-66-NH2) shows dramatically enhanced fluorescence emission and selective sensitivity for U(VI) on the basis of the quenching effect. The quenching efficiency increases from 58 to 80% with the same U(VI) concentration (17.63 μM) after NH3 plasma functionalization. As a result, the LTP@UiO-66-NH2 has the best Ksv (1.81 × 105 M–1, 298 K) and among the lowest LODs (0.08 μM, 19.04 ppb) compared with those reported in the literature. Intraday and interday precision and application in real environment experiments indicate stable and accurate U(VI) detection performance. Fluorescence lifetime and temperature-dependent detection experiments reveal that the quenching mechanism belongs to the static quenching interaction. The highly selective fluorescence detection is attributed to the selective binding of U(VI) by the rich functionalized amine groups of LTP@UiO-66-NH2. This work provides an efficient fluorescence probe for highly sensitive U(VI) detection in water, and a new strategy of tailored plasma functionalization for developing a practical MOF sensor platform for enhanced fluorescence emission, sensitivity, and selectivity for detecting trace amounts of radioactive species in the environment.
✓ 已验证
DOI
高影响因子
Journal of Water Process Engineering
·
2024
·
IF 6.3
Nan Zhao,Kangjie Zhang,Yuexiang Lu,Shuang Liu,Zhe Wang,Xiangke Wang
The photocatalytic method has been proven as one of the effective methods for uranium removal from radioactive wastewater. Herein, a photocatalyst UiO-66-NH 2 -Pt was prepared using the adsorption-photoinduction method. Pt was first adsorbed on the substrate and then photo-reduced under light irradiation to be doped into the structure of UiO-66-NH 2 . The characterization results implied the formation and atomic dispersion of Pt with a loading content of 1.90 wt%. The loading of Pt has promoted the effective separation and transfer of photogenerated electron-hole pairs, broadened the visible light adsorption range and narrowed down the bandgap, thus to enhance the photocatalytic activity. Then they were applied for the photo-removal of uranium under air atmosphere. The reaction rate of UiO-66-NH 2 -Pt was about 7 times that of pure UiO-66, confirming the higher photocatalytic activity after the loading of Pt. It showed good reusability and was also universal for different water matrix. The detection of hydroxyl radicals with EPR method indicated the formation of H 2 O 2 , which could react with uranyl ions to form metastudtite under air. This work further verified the feasibility of photoinduced synthesis of Pt single atom and provided a novel material for photocatalytic removal of uranyl ion under air.
✓ 已验证
DOI
高影响因子
NANO
·
2015
·
IF 1.09
Desheng Xi,Xiaojuan Deng,Huijun Li,Pei Yao
Allura red (AR) is a water-soluble synthetic colorant often used as an additive in the food industry, but excess AR can be harmful to human health. In this work, we report the development of a new removal method for AR by using amino-functionalized microspheres with Fe 3 O 4 cores and twolayer shells composed of SiO 2 particles and perpendicularly aligned mesoporous SiO 2 (designated Fe 3 O 4 @nSiO 2 @mSiO 2 –NH 2 ). The material exhibits good dispersibility in aqueous solutions and a high saturation magnetization of 45.68 emu g − 1 , and can be magnetically separated efficiently with an external magnet. Importantly, the material has great adsorption capacity of 29.6 mg g − 1 for AR and the capacity for reuse with a simple treatment. The adsorption process is very fast and the kinetics data are consistent with a pseudo-second order model. Based on these, a rapid and efficient method for extraction and analysis of AR in water and soft drinks has been established.
✓ 已验证
DOI
高影响因子
ACS Applied Polymer Materials
·
2024
·
IF 4.4
Zhaojie Wang,Qinglong Liu,Xinle Sun,Caifeng Xia,Qikang Yin,Maohuai Wang,Xiaodong Chen,Huili Zhang,Shuxian Wei,Xiaoqing Lu,Siyuan Liu
MOFs-filled mixed matrix membranes (MMMs) have great potential to break the trade-off effects of traditional gas separation membranes. However, achieving good interfacial compatibility and adequate dispersion of the MOF is not straightforward. In this study, a continuous postmodification was developed for advanced CO2/N2 MMMs. UiO-66-NH2 was easily modified with trimesoyl chloride (UiO-66-TMC) and polyethylene glycol (UiO-66-PEG) sequentially, which was utilized as fillers to construct polyimide (PI) mixed matrix membranes (MMMs). Rich interactions between modified UiO-66-NH2 and the PI polymer contribute to efficient CO2 and N2 separation. At 25 °C and 0.1 MPa, UiO-66-TMC/PI MMMs showed a CO2/N2 selectivity of 55.3, and a CO2 permeability of 616.17 Barrer, and those are 56.7 and 686 Barrer for UiO-66-PEG200/PI MMMs. Both of their CO2/N2 separation performances exceed the 2008 Robeson upper bound. The ether bonds in PEG exhibit strong interactions with the CO2 molecules and improve the CO2 dissolution selectivity. Meanwhile, the introduction of organic ingredients realized good dispersion and interfacial compatibility within the PI matrix. This work lays the groundwork for the further fabrication of highly selective CO2 separation materials with specific microscopic interface structures and properties.
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Tian Tian,Yannan Jia,Jianguo Wu,Jinlong Zhao,Kai Xu,Zijie Wang,Zheng Wang
With the increasing threat antimony (Sb) pollution poses to the environment, its removal from water is becoming increasingly important. Accordingly, metal-organic frameworks (MOFs) are garnering increasing research attention owing to their excellent performance as adsorbents. Here, the MOF MIL-101(Cr)-NH 2 was prepared directly by solvothermal synthesis. Sb(III) adsorption using MIL- 101(Cr)-NH 2 was evaluated systematically at varying adsorbent dosages and pHs. And the adsorption kinetics, isotherms, and thermodynamics were explored by altering the contact time, initial Sb(III) concentration, and temperature, respectively. The results revealed that Sb(III) was adsorbed onto MIL-101(Cr)-NH 2 very quickly, even at low antimony concentrations. The maximum Sb(III) adsorption capacity of MIL-101-NH 2 is 83.61 mg g -1 . In the presence of coexisting ion (NO 3 - ), the amount of Sb(III) adsorbed was slightly increased, which may be due to the formation of an inner-sphere complex. The Box–Behnken method was used to design and optimize a response surface with reference to three main influencing factors, that is, dosage, pH, and temperature, so as to obtain a multivariate quadratic model of adsorption behavior and identify the optimal adsorption conditions. Finally, a preliminary economic analysis of the synthetic material was carried out.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）