ACS Omega
·
2020
·
IF 2.87
Ming Hu,Xue-Qiong Yang,Cui-Fang Wang,Tong-De Zhao,Dai-Li Wang,Ya-Bin Yang,Zhong-Tao Ding
Six new polyketides named paraverrucsins A–F (1–6) with oxabicyclic and dioxatricyclic skeletons, together with eight known metabolites (7–14), were discovered and isolated from the fermentation medium of Paraphaeosphaeria verruculosa. Paraverrucsin A–C possessed a novel decarboxylated skeleton compared with that of trichocladinols. Their structures were elucidated by extensive spectral analysis and DP4+ calculations. Paraverrucsins B/C and D/E were isolated as a mixture for the mutarotation occurred at C-2. Paraverrucsins B/C, D/E, F/trichocladinol B, 8, and 9 displayed antifeedant activities against silkworm larvae, with antifeedant index percentages ranging from 62.5 to 93.0%, at a concentration of 50 μg/cm2. Among them, Paraverrucsins B/C and 9 had EC50 values at 13.9 and 18.2 μg/cm2. Most compounds showed antifungal activities against phytopathogenic fungi with minimum inhibitory concentration (MIC) values of 16–64 μg/mL. Coculture of P. verruculosa and host plant Dendrobium officinale leads to the enhancement of antifeedant and antiphytopathogenic activities. Compounds 1, 2/3, 4/5, 6/14 were tested for cytotoxicity against five human carcinoma cell lines, HL-60, A549, MCF-7, SW480, and SMMC-7721, while they exhibited selected cytotoxicity against SW480 with inhibition ratios of 32–38% at a concentration of 40 μM.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Physical Chemistry C
·
2020
·
IF 4.189
Yefeng Feng,Furong Zhou,Maolin Bo,Yuehao Huang,Qihuang Deng,Cheng Peng
High dielectric constant and breakdown strength are crucial for high-energy-density polymer/ceramic composites. Anatase-TiO2 with low dielectric constant and V2C MXene with high work function are not satisfactory fillers. In the present work, V2C–TiO2 hybrid filler was in situ synthesized, followed by fabricating poly(vinylidene fluoride) (PVDF)/V2C–TiO2 composites via solution cast. Compared with PVDF/TiO2 and PVDF/V2C composites, PVDF/V2C–TiO2 composites have an improved high dielectric constant, depressed low dielectric loss, and maintained high breakdown strength. High overall electric traits are ascribed to the synergy of conductive V2C and semiconductive TiO2. Outer and inner surfaces of V2C were ornament-combined by anatase-TiO2 particles having surface point defects as electron traps, contributing to low interface leakage conduction. Through density functional theory (DFT) calculations, nontypical V–F–Ti-bonding-induced dipole enhancement and Fermi-level (EF) overlapping-induced high electron localization mechanisms improve the dielectric response. Ternary composite with 10 wt % hybrid filler exhibits a dielectric constant of ∼99, a dielectric loss of ∼0.24 at 1 kHz, and a breakdown strength of ∼189 MV/m. This work might enable large-scale preparation of promising polymer/MXene composite dielectrics.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 8
·1-13
·
IF 6.232
Min Jie,Qu Xiang-Long,Yan Bing
A novel fluorescent and electron-deficient hybrid, N -methylated [Eu (pddb)phen(ox) 0.5 ] n (Eu-MOF-Me) has been prepared via post-synthetic modification. Considering its special luminescent properties and cationic framework, Eu-MOF-Me is developed as a visualized fluorescent probe. Notably, water-stable Eu-MOF-Me exhibits advantages like good structural and fluorescent stability in a wide range of pH value (3.39–10.86), excellent identification ability for F − , I − , and S 2− (it can easily distinguish F − and I − from other halogen ions and can realize naked eye identification of F − , I − , and S 2− ), relatively low detection limits (6.61 μM for S 2− , 7.57 μM for F − ), and reusability. More importantly, it has been utilized for the construction of a Boolean logic gate system. In this system, Eu-MOF-Me serves as the gate, by taking F − , I − , and S 2− as the inputs and fluorescence emission bands (UV380, B437, and R612) as the outputs; some primary logic gates (NOR, IMP, YES, NOT) and the combination of them have been realized. Moreover, we achieved a cascaded logic gate (NOR+OR). For further application, a molecular computing keypad-lock security system has been obtained.
A novel fluorescent and electron-deficient hybrid named Eu-MOF-Me has been prepared via post-synthetic methylation. Considering its special luminescent properties and cationic framework, Eu-MOF-Me was developed as a fluorescent probe for the visual monitoring of important anions. In addition, it was used for the construction of Boolean logic library and a keypad-lock system was achieved
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nano Energy
·
2020
·
IF 16.602
Shuwei Han,Duo Chen,Jian Wang,Zhen Liu,Fan Liu,Yuke Chen,Yanchen Ji,Jinbo Pang,Hong Liu,Jingang Wang
Piezotronic effect has been thought as a general approach for building high performance hybrid photocatalysts by integrating semiconductor nanostructures on piezoelectric materials . Although polyvinylidene fluoride (PVDF) has been widely applied as a flexible piezoelectric material, it is thought that assembling inorganic semiconductor nanostructures on PVDF surface is promising owing to the high hydrophobic property of PVDF. In this study, we proposed that the coordination effect between a metal ion and an exposed fluorine atom on the surface of PVDF can be used to assemble a layer of photocatalytic metal oxide nanostructures on the PVDF film surface. Using Sn 3 O 4 as a model oxide, a Sn 3 O 4 /PVDF hybrid nanostructured photocatalyst was successfully synthesized. The X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy results confirmed the existence of coordinated bonds between F ions and metal ions, which could explain the stable growth of inorganic nanostructures on the hydrophobic surface of PVDF. At the interface between Sn 3 O 4 and PVDF in the hybrid nanostructured photocatalyst, a built-in electric field was constructed on the basis of the ferroelectric field of the PVDF film, which induced an enhanced photocatalytic property. Most importantly, the swing driven by flowing water can considerably enhance photocatalytic properties owing to the piezotronic effect-driven alternating reconstruction of built-in electric field induced by the deformation of PVDF film. This study provides an approach for the synthesis of metal oxide semiconductor nanostructures on hydrophobic PVDF polymer surface . The developed material will have many applications in the photodegradation of organic pollutants in waste water.
✓ 已验证
产品关联
DOI
高影响因子
SYNTHETIC METALS
·
2019
·
IF 2.87
Ye Wang,Yiwen Huang,Feiyu Wang,Jingjing Zhao,Yiming Zhang
The weak interactions between anions and common functional groups make it difficult for the development of anion photoluminescence sensors. In this work, we report an ultra-sensitive anion photoluminescence (PL) sensor for F − based on triethylene glycol monomethyl ether modified poly(p-phenylenediamine) dots (TPPDs). Due to the PET process in excited TPPDs, no obvious PL behavior can be observed in TPPDs. Due to the fast photoinduced electron transfer (PET) process in excited TPPDs, no obvious photoluminescence behavior can be observed: however, the PET process can be cut off in the presence of F − and TPPDs show bright red PL. The detection limit of this system is 2 × 10 −10 M, which is much lower than most other reported detection methods. Compared with traditional “ON-OFF” PL sensors, such an “OFF-ON” PL detection system shows higher value in practical applications. The detection system exhibits superior photostability and high selectivity for F − . We also demonstrate the successful F − detection in vitro based on TPPDs.
✓ 已验证
产品关联
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2024
·
IF 4.3
Wenqing Li,Jingyue Zhang,Linhan Fan,Yun Zhao,Changyan Sun,Wenjun Li,Zhidong Chang
Aniline is an organic pollutant with carcinogenicity and teratogenicity, while F - and Hg 2+ are toxic ions that are easily soluble in water. When they are released to the environment, they will pose a threat to human health. Designing a material that can simultaneously detect three types of pollutants is of great significance. In this paper, a novel rare earth metal organic framework material (Eu-MOF) with three-dimensional structure based on 1-methylimidazole-4,5-dicarboxylic acid was synthesized for the first time through solvent thermal method. It has excellent luminescent performance and can be used as a multifunctional fluorescent probe to detect aniline, F - , and Hg 2+ based on photoinduced electron transfer, energy competitive absorption, and ion exchange mechanisms, with detection limits of 1.79 × 10 -8 , 8.13 × 10 -8 , and 8.83 × 10 -7 M, respectively. It is worth noting that Eu-MOF can detect F - and Hg 2+ in real water samples, such as lake water and green tea water, with favorable recovery rates.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Yu-Zhen Zhang,Yi-Le Li,Zhi Jin,Mao-Fang He,Yi-Mei Tang,Jian Zhang,Bo Zhang
Flemingia philippinensis Merr.et Rolfe ( F. philippinensis ) is an important food ingredient as well as a traditional Chinese medicine with numerous pharmacological actions. Unfortunately, there was no defined method for monitoring the quality of F. philippinensis in the Chinese Pharmacopoeia. In this study, a magnetic covalent organic framework molecularly imprinted polymers (MCOFs-MIPs) was prepared using MCOFs as a support material, genistein (Gen), which was abundant in F. philippinensis , as a template molecule, and acrylamide as a functional monomer. The preparation process of MCOFs-MIPs was optimized and their structures and adsorption characteristics were characterized. In the selectivity test, the imprinting factor of Gen was 1.93, demonstrating that the imprinting effect of MCOFs-MIPs could selectively enrich Gen in complex samples. Following that, a new and effective quality control method (Gen-MCOFs-MIPs-HPLC) was established to determine Gen content in F. philippinensis roots. The method showed good linearity (R 2 = 0.9936) in the range of 0.12–80 µg mL −1 . The recoveries of Gen in F. philippinensis high, medium and low samples were 90.5–91.0 %, 92.1–100.1 and 92.8–100.8, respectively. Stability and reproducibility tests revealed that this method was stable (RSD of 1.20 %) and reproducible (RSD of 0.70 %). Moreover, the calculation showed that the amount of Gen in the F. philippinensis powder was 0.4489 mg g −1 . As a result, the approach was shown to be simple, repeatable, and stable, and it provided a sensitive and reliable method for the extraction and detection of Gen in natural products.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2025
·
IF 14.3
Jun He,Haoran Qian,Guodong Peng,Hongyu Hu,Li Jiang,Xiaojun He
It is a big challenge to tune the structure and composition of carbon-based anode materials to increase the active sites by a green synthesis strategy for potassium ion batteries (PIBs). Herein, the N/F/S co-doped three-dimensional (3D) interconnected carbon nanosheets (NFS-CNSs) were synthesized from coal tar pitch (CTP) through a green and low-temperature treatment process for the first time. The as-obtained NFS-CNS 600 features 3D interconnected ultra-thin carbon nanosheets with abundant active sites, tunable N/F/S species, and enlarged carbon interlayer spacing. The density functional theory calculation results demonstrate that NFS-CNSs exhibit the highest electron density and most negative K + adsorption energy (–0.59 eV) compared to single or double-atom doping, thereby enhancing the storage performance of K + . As an anode for PIBs, the NFS-CNS 600 exhibits good cycle stability (98.2 % capacity retention after 200 cycles at 0.2 A g −1 ), high capacity (409.1 mAh g −1 at 0.05 A g −1 ) and rate performance (179.5 mAh g −1 at 5 A g −1 ). Besides, the NFS-CNS 600 anode also displays outstanding sodium storage performance. This work offers a green strategy to synthesize CTP-based anode materials from coal chemical by-products for high-performance PIBs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY
·
2024
·
IF 3.1
Yanyang Wang,Shanshan Gao,Gege Yang,Wenyi Zhu,Ying Lu,Mengyuan Tan,Yuancheng Peng,Hua Yang,Chunxia Song
A portable platform for the visual determination of F− and Al3+ was developed by combining FeNPs@g-C3N4 nano-enzyme and a smartphone. The FeNPs@g-C3N4 nano-enzyme with excellent peroxidase activity was synthesized through the in situ growth of Fe nanoparticles (FeNPs) on graphite-phase carbon nitride nanosheets (g-C3N4), which could catalyze H2O2 to oxidize TMB to blue oxide (oxTMB). The peroxidase activity of the FeNPs@g-C3N4 nano-enzyme could be inhibited by F−, and then restored by Al3+ because of the coordination reaction between Fe3+/Al3+ and F−. Furthermore, the solution color could be dynamically manipulated by changing the concentrations of F− and Al3+. Under optimal conditions, the developed method gave low detection limits of 2.43 nM for F− and 7.66 μM for Al3+. The cooperation of nano-enzyme and smartphone has greatly shortened the detection time and reduced the cost of detection, providing a new strategy for the on-site and convenient detection of F− and Al3+ in tea, and showed significant application potential in food safety evaluation.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Decai Yang,Qing Ye,Chao Qu,Fanwei Meng,Lanyang Wang,Yongqi Li
Developing photocatalytic hydrogen evolution technology based on graphitic carbon nitride (g-C 3 N 4 , CN) has emerged as a potential solution for the future energy shortage in recent years. Herein, carbon (C) and fluorine (F) co-doping graphitic carbon nitride nanosheets (CFCN) were synthesized via a one-pot co-thermal method without introducing any metal element. Exceptional hydrogen production activity (3.87 mmol/h/g) was achieved by CFCN under visible light irradiation, which was 4.2-fold increase compared to the pristine CN. It could be attributed to the large specific surface area (51.59 m 2 /g) and efficient mass transfer facilitated by the porous sheet-like morphology of CFCN. Additionally, the modification of the band structure and internal charge redistribution were investigated via density functional theory (DFT) calculations, which confirmed there was a unidirectional and fast electron transfer channel from N through the C 4 delocalized large π bond to F. This creative research uncovered the pivotal role of F/C co-doping in enhancing photocatalytic hydrogen evolution efficacy, offering cutting-edge insights into the design of sustainable and eco-friendly photocatalysts based on metal-free CN.
✓ 已验证
产品关联
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2018
·
IF 2.88
Yabo Shi,Min Liu,Hui Yan,Chang Cai,Qingying Guo,Wenxin Pei,Ruiyan Zhang,Zhengping Wang,Jun Han
The individual and combined interactions of bisphenol F and piceatannol with pepsin were investigated using spectroscopic methods (fluorescence, UV–vis absorption, and circular dichroism spectroscopy), combined with isothermal titration calorimetry and molecular docking. Thermodynamic data showed that hydrogen bonds and van der Waals forces might play a major role for the binding process. Site marking experiments and molecular docking confirmed the binding sites of these two ligands on pepsin. The discrepancy in the binding constant between the binary and ternary systems indicated the competitive binding of piceatannol and bisphenol F to pepsin. Circular dichroism spectra studies suggested that the binding of the two ligands led to a loosening of pepsin backbone. Enzyme activity assays indicated that the inhibition of pepsin activity by piceatannol and bisphenol F was competitive. These results will be helpful to understand the mechanism of piceatannol and bisphenol F affecting the activity of digestive proteases in the sight of the food security.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2024
·
IF 5.4
Lei Zhou,Xin Wei,Junxiang Zhang,Xuecui Mei,Yun Li,Chaoyue Zheng,Furong Zhang,An Wen,Bin Wang
Sulfide solid electrolytes (SSEs) have some huge advantages in high room-temperature conductivity, good thermal stability, low interfacial resistance, etc. They are one of the ideal solid electrolytes for developing high energy density and high safety for all-solid-state lithium batteries (ASSLBs). However, the preparation of SSEs requires expensive Li2S as the raw material, whose high cost limits its practical application. Herein, a cost-effective SSE Li7.3P2.9S10.75X0.3 (X = F, Cl, Br, and I) was designed and prepared by using low-cost lithium and sulfur instead of expensive Li2S. Significantly, the cost of SSEs was reduced from $169.72 to $28.13 kg–1 based on replacing the Li2S strategy. Moreover, the prepared Li7.3P2.9S10.75X0.3 (X = F, Cl, Br, and I) solid electrolytes have a high ionic conductivity of 1.86–2.73 mS cm–1 at room temperature and a high voltage window of 5 V. On this basis, we assembled the all-solid-state lithium battery TiS2/Li7.3P2.9S10.75I0.3/Li–In, which presented a high initial discharge capacity of 219 mA h g–1 at room temperature and satisfactory cycle stability with a capacity retention of 86.7% after 100 cycles at 0.50 mA cm–2. This work provides an effective strategy for reducing the cost of SSEs, advancing the practical process of ASSLBs.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）