CATALYSIS LETTERS
·
2026
·Vol. 156
·期 7
·205
·
IF 2.5
Zhang Yikang,Zhang Yihu,Sun Min,Li Bin,Wang Haiyan,Li Zijiong
The oxygen reduction reaction (ORR) serves as the core cathodic reaction for fuel cells. However, the sluggish ORR kinetics and high cost of Pt-based catalysts severely restrict the commercialization of fuel cell devices. Herein, a facile in-situ synthetic strategy is developed to fabricate carbon dot-supported cobalt (CD@Co) electrocatalysts, in which carbon dots (CDs) act as both reducing agent and structural modulator. With the aim of optimizing catalytic activity and stability, the effects of CDs dosage on Co dispersion, nitrogen configuration and ORR performance are systematically investigated. The optimized CD@Co-0.12 exhibits a half-wave potential of 0.89 V (vs. RHE) and a limiting current density of 4.47 mA·cm − 2 , outperforming commercial 20% Pt/C (E 1/2 = 0.85 V). Kinetic analysis reveals a Tafel slope of 90.65 mV·dec − 1 and a near-four-electron transfer pathway ( n ≈ 3.78). After 5000 CV cycles, only negligible potential decay is observed, demonstrating excellent stability. This work provides a low-cost and scalable strategy for designing high-performance non-precious metal ORR catalysts. Graphical Carbon dot regulated CD@Co non-precious electrocatalyst toward efficient alkaline oxygen reduction reaction
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 15
Huang Sijia,Yang Menglan,Ding Chen,Du Wenfang,Yang Shengyuan,Xi Qiang,Xiao Fubing
Bacterial-infected wounds present a critical clinical challenge due to persistent inflammation, impaired angiogenesis, and the lack of real-time treatment monitoring. To address these issues, we developed an innovative colloidal crystal hydrogel microneedle (CT MNs) patch based on CuS nanoparticles (CuS NPs) and tannic acid-berberine nanoparticles (TB NPs). This system integrates synergistic antibacterial/antioxidant therapy with structural color-based drug release self-reporting capability. Specifically, the CT MNs combine photothermal CuS NPs for near‑infrared (NIR)-triggered hyperthermia and temperature‑controlled drug release, the release of TB NPs for potent antibacterial/antioxidant activities, and the color changes of the inverse opal colloidal crystal for real‑time monitoring of drug release. In vitro assays demonstrated strong antibacterial effects (95.65% and 95.92% against E. coli and S. aureus , respectively) and outstanding ROS‑scavenging capacity (92.93% for DPPH and 97.36% for ABTS⁺). In infected rat models, the CT MNs + NIR group achieved rapid wound closure (94.41% by day 10), significantly outperforming the controls. This accelerated healing was attributed to the synergistic effects of photothermal ablation, TB NPs-mediated bacterial clearance, and ROS-scavenging-driven inflammation alleviation. Therefore, this work presents a theranostic dressing that merges targeted combination therapy with non‑invasive optical monitoring of drug release, offering a promising strategy for intelligent wound management. Graphical
✓ 已验证
DOI
PubMed
高影响因子
PHARMACEUTICAL RESEARCH
·
2026
·
IF 4.1
Li Mengyuan,Yan Shen,Zhang Shengyu,Chen Xiao Dong,Wu Winston Duo
Purpose Conventional spray drying often produces heterogeneous enzyme powders because of broad droplet size distributions and complex turbulent flow fields, limiting mechanistic understanding of particle formation and quantitative structure–activity analysis. This study aimed to fabricate uniform lysozyme microspheres and clarify how formulation and drying conditions govern their microstructure and enzymatic activity. Methods A micro-fluidic jet spray dryer was used to prepare highly uniform pure lysozyme and excipient-containing lysozyme microspheres. The effects of carbohydrate excipients and drying temperature on particle morphology, secondary structure, surface composition, and enzymatic activity were systematically evaluated. Results Pure spray-dried lysozyme microspheres showed a highly uniform single-hole bowl-like morphology with smooth surfaces. However, drying-induced thermal and shear stresses reduced α-helix content and caused activity loss. Carbohydrate excipients altered the structural evolution pathways. Surface elemental analysis indicated lysozyme enrichment in most formulations, except those containing dextran T40. Mannitol crystallization induced phase separation, lysozyme unfolding, and inactivation. Trehalose preserved conformational stability through a hydrogen-bonded glassy matrix, whereas dextran T40 mainly suppressed lysozyme aggregation through steric hindrance. Conclusions This work establishes a formulation properties/process–microstructure–enzymatic activity relationship in a uniform microsphere system, supporting the rational design of performance-predictable spray-dried enzyme powders.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF THERMAL SPRAY TECHNOLOGY
·
2026
·
IF 3.4
Shadmani S.,Khodaei M.,Yang R.,Chen X.,Li H.
This research engineers a high-performance superhydrophobic composite system by synergizing an Al arc-sprayed bond coat with a nanostructured CeO 2 topcoat deposited via solution precursor plasma spraying (SPPS). The objective was to utilize the intrinsic micro-roughness of the arc-sprayed layer to stabilize a Cassie–Baxter wetting state without organic modifiers. Optimization of the SPPS process identified the critical parameters for achieving a hierarchical topography: a standoff distance of 7 cm, a liquid feed rate of 42 rpm, a transverse speed of 500 mm/s, and a total of 4 spray passes. This optimized protocol leveraged the “shadowing effect” of the Al bond coat (Ra ~ 13µm), resulting in a 90% reduction in the required spray passes compared to conventional coatings on smooth substrates. Microstructural analysis confirmed the formation of a phase-pure CeO 2 topcoat with a refined crystallite size of 81 nm. The resulting hierarchical architecture yielded a water contact angle of 151° and a contact angle hysteresis of 2°. Mathematical modeling via the Cassie–Baxter equation quantified a liquid–solid contact area fraction of 0.04, indicating that 96% of the droplet base was supported by trapped air pockets. Electrochemical performance evaluated via potentiodynamic polarization and electrochemical impedance spectroscopy after 96 hours of immersion in 3.5 wt.% NaCl demonstrated superior durability. The Al-CeO 2 composite exhibited a 128% increase in corrosion resistance and a 50.5% reduction in the corrosion rate compared to the bare Al bond coat. While the single-layer benchmark system experienced a 95.5% reduction in coating resistance due to electrolyte infiltration, the optimized Al-composite restricted degradation to 40%. Surface chemistry analysis via x-ray photoelectron spectroscopy revealed that the transition to superhydrophobicity is governed by the spontaneous adsorption of airborne volatile organic compounds, ensuring chemical stability up to 450°C. These results establish a robust, industrially scalable manufacturing route for protective coatings in aggressive marine environments.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Hu Qing,Wu Haiyi,Shi Ling,Yao Zhenhua,Jin Fang,Hu Maocong
This study investigates the synergistic effects of pyrolysis temperature and sulfur doping on the structure and oxygen reduction reaction (ORR) performance of cobalt-based catalysts derived from metal–organic frameworks. Using thiourea as the sulfur source, a series of Co-NSC catalysts were synthesized at different temperatures (750–1050 °C). The results demonstrate that sulfur doping effectively inhibits metal agglomeration by forming Co–S coordination bonds, while an optimal pyrolysis temperature (850 °C) balances defect density, pore structure, and active-site distribution. Among all samples, Co-NSC-850 exhibits favorable ORR activity in alkaline medium, with a half-wave potential of 0.852 V, an electron transfer number close to 4, and H 2 O 2 selectivity below 5%. When applied in zinc-air batteries, Co-NSC-850 delivers a power density of 254.22 mW cm −2 , a small charge–discharge gap (1.02 V), a specific capacity of 809.18 mAh g −1 , and a cycle life of 220 h, comparable to or better than commercial Pt/C. This work provides valuable insights for designing high-performance non-noble metal ORR catalysts through cooperative regulation of temperature and heteroatom doping. Graphical abstract
✓ 已验证
DOI
高影响因子
Carbon Letters
·
2026
·
IF 6.2
Wang Fan,Zhou Yuan,Hu Zhongli,Wang Weihua,Sha Liyuan,Huang Xinran,Hu Tao,Zhang Li
Hollow carbon spheres (HCSs) have emerged as promising anode materials for lithium-ion batteries (LIBs), yet their practical application is hindered by intrinsic limitations. Excessive internal voids reduce the tapped density and volumetric energy density, while poor interparticle connectivity increases transport resistance and compromises rate capability. Here, we present a series of nitrogen-doped hollow carbon sphere clusters (HCSCs) with varying hollow diameters (20 nm, 100 nm, and 300 nm), achieved via a combined spray-drying and solution-stirring approach. The 20-HCSCs with ultra-small cavities (20 nm) markedly enhances tap density, while cluster-level interconnectivity establishes continuous pathways for efficient Li + and electron transport, thereby enabling rapid charge/discharge kinetics and high volumetric capacity. Consequently, the 20-HCSCs electrodes exhibit an exceptional reversible capacity of 447.3 mAh cm -3 after 90 cycles at 0.2 C, surpassing that of 100-HCSCs, 300-HCSCs electrodes and conventional graphite electrodes (around 372 mAh cm -3 ), and demonstrate remarkable high-rate cyclability, retaining 68.5 mAh cm -3 after 3000 cycles at 50 C. The ultrahigh volumetric capacity mitigates the volumetric penalty typically imposed by hollow structures, offering a viable strategy to reconcile high capacity, fast-charging capability, and competitive volumetric performance in carbonaceous anodes. Graphical abstract Ultra-small-cavity HCSC anodes with both high volumetric energy density and fast-charging capability
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL SCIENCES
·
2026
·
IF 2
Yu Bingxin,Qian Shaojun,Yao Chongyang,Shen Qingli,Wang Lei
Narrow therapeutic index drugs (NTIDs) require precise monitoring to ensure efficacy and prevent toxicity, yet their analysis in complex biological matrices remains challenging. This study presents a novel sonic-spray ionization mass spectrometry (SSI-MS) method for the rapid and sensitive analysis of NTIDs, using tacrolimus as a model compound. The custom-built SSI source operates without high voltage or heating, relying solely on a coaxial nitrogen flow for gentle and efficient ionization. Under optimized conditions, the method achieved a low limit of quantitation (5 ng/mL) and excellent linearity (R² = 0.999) across the clinically relevant therapeutic window (5–200 ng/mL). Compared to electrospray ionization, SSI provided a cleaner background and a 1.88-fold improvement in the signal-to-noise ratio. The accuracy of this method was validated in mice serum, with recoveries ranging from 99.8% to 106.8% and relative standard deviations below 8.4%. Furthermore, the platform successfully detected tacrolimus directly in a saline matrix. These results demonstrate that SSI-MS is a powerful, high-performance tool for the rapid and reliable quantification of NTIDs, offering significant potential for advancing therapeutic drug monitoring in clinical practice. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2026
·
IF 3.1
Hao Ruixin,Liang Jinjiang,Gao Tianyi,Yuan Qiong,Shi Hongsheng,Liu Wei,Yu Yi
Garnet-type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) is a promising solid electrolyte, but Li dendrite penetration remains a critical challenge. Since pores and grain boundaries are often regarded as preferential sites for Li deposition, the local structure and chemistry of these regions were investigated. Zr enrichment was observed near pores and grain boundaries, and focused ion beam (FIB)-transmission electron microscopy (TEM) analysis identified the grain boundary impurity phase as Li 2 ZrO 3 , indicating that local chemical heterogeneity is closely associated with failure-sensitive regions in LLZTO. To trace the origin of this impurity phase, the precursor was further examined. La 2 O 3 was found to undergo hydration during storage, forming La(OH) 3 and introducing an effective stoichiometric deviation during synthesis, which promotes Li 2 ZrO 3 formation. After pre-annealing purification of La 2 O 3 , the impurity phase was significantly suppressed, while the relative density and critical current density (CCD) of LLZTO were both markedly improved. These results demonstrate that precursor purification is an effective strategy for improving the phase purity, relative density, and current tolerance of LLZTO. Graphical abstract Online Figure: La 2 O 3 precursor purification improves LLZTO relative density and current tolerance. Pre-annealing commercial La 2 O 3 at 900 °C for 10 h reduces hydroxide/oxycarbonate-related impurities, suppresses Li 2 ZrO 3 formation, and yields denser LLZTO ceramics with enhanced CCD.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 7
·487
·
IF 5.4
Guo Xiaotian,Li Rong,Tang Ruizhi,Ma Shujuan,Bian Yangyang,Tang Zichao,Cao Jianbo,Ou Junjie
The selective enrichment of phosphopeptides plays a crucial role in enhancing food nutritional value and developing functional foods. However, the identification of low-abundance multi-phosphopeptides is a formidable challenge as the extreme hydrophilicity and low ionization efficiency of the multi-phosphopeptides restrict in-depth research of multisite phosphorylation processes. To address this issue, a novel hydrogen-bond-mediated functional material (MAR@PUP) was facilely designed and fabricated , with epoxy group-containing macroporous adsorption resin (MAR) as the matrix, via a “one-pot” reaction of p-phenylene diisocyanate (PDI) and tris(2-aminoethyl)amine (TAEA). The resulting MAR@PUP leverages the polyurea-based groups on its surface to achieve selective enrichment of mono-/multi-/total phosphopeptides by modulating the strength of multiple hydrogen bond interactions under varying conditions, with particularly high efficiency in multi-phosphopeptides enrichment. Furthermore, nine multi-phosphopeptides were successfully identified from 5 µg of actual nonfat milk samples, which verified the feasibility of MAR@PUP material for practical sample analysis and its promising application potential. This research provides a novel and practical strategy for the efficient enrichment and accurate determination of multi-phosphopeptides in food chemistry. Graphical
✓ 已验证
DOI
PubMed
高影响因子
Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·417
·
IF 38.5
Lu Chunching,Zhang Guangxiang,Niu Yuxiang,Zhu Yupeng,Li Siyuan,Huo Hua,Ma Yulin,Zuo Pengjian,Yin Geping,Gao Yunzhi,Wang Liguang,Fu Chuankai,Chen Wei
Artificial solid electrolyte interphase offers a promising route to improve the lifespan and safety of quasi-solid-state sodium-metal batteries (QSMBs), yet its limited ion conductivity and the low liquidity of the polymer electrolyte often result in unstable Na plating/stripping kinetics and poor interfacial durability. Herein, we propose a surface-induced “top” Na deposition mechanism facilitated by an ultra-sodiophilic ionic/electronic mixed conductor interphase exhibiting strong Na + adsorption affinity, which ensures fast and dendrite-free Na anode operation. The embedded Na 3 Sb alloy phase, featuring high electronic conductivity and strong Na + adsorption energy, significantly accelerates interfacial ion diffusion and nucleation kinetics, forming a smooth and compact Na deposition layer that facilitates stable solid electrolyte interphase formation and preserves interfacial integrity. Consequently, Na||Na symmetric cells employing a 1, 3-dioxolane-based gel polymer electrolyte deliver an ultra-long-cycling lifespan of 1000 h at 0.5 mA cm −2 with a low overpotential of 40 mV. Moreover, QSMBs incorporating the modified Na anode and Na 3 V 2 (PO 4 ) 3 cathode demonstrate outstanding cycling stability (74.1% capacity retention after 9000 cycles at 2C) and superior rate capability (91.7 mAh g −1 at 5C). The work provides mechanistic insights and practical strategies for regulating Na deposition, paving the way toward high-performance QSMBs.
✓ 已验证
DOI
PubMed
高影响因子
Journal of the Korean Ceramic Society
·
2026
·
IF 4.4
Song Xiao-jie,Weng Tong-juan,Li Jing-wen,Dong Wei-wei,Sun Yue,Liu Shuai-peng,Oh Won-Chun
Photocatalytic reduction of CO 2 into chemical fuels under visible light has garnered increasing attention. Herein, we designed silver nanoparticle (Ag NPs)/carbon quantum dot (CQDs)/TiO 2 nanotubes (TNTs) nanocomposites via a hydrothermal process combined with an in-situ photod-eposition method. Results of methylene blue photodegradation tests under visible light demonstrated that Ag/CQDs/TNTs exhibited higher photocatalytic efficiency than pristine TNTs. In addition, in the carbon dioxide photoreduction experiment, the optimized Ag/CQDs/TNTs has a photocatalytic yield of 38.33 µmol g -1 h -1 when carbon dioxide is converted into carbon monoxide, which is 5.3 times that of pure TNTs. Detailed experimental characterizations revealed that the enhanced photocatalytic performance of Ag/CQDs/TNTs stemmed from the surface plasmon resonance effect of Ag NPs and the excellent optoelectronic properties of CQDs. This work offers insights for fabricating ternary catalysts for photocatalytic CO 2 reduction.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED ELECTROCHEMISTRY
·
2026
·Vol. 56
·期 8
·150
·
IF 3.7
Ji Shiyu,Yang Kaihe,Guo Xiaoyuan,Zhao Shiqin,Zhang Ao,Xu Chenxuan
Ru-based catalysts represent promising Pt alternatives due to their decent hydrogen adsorption energy and cost advantages. However, their practical application is hindered by sluggish hydrogen evolution reaction (HER) kinetics and insufficient active site exposure in alkaline media. Herein, this work innovatively developed rapid solventless microwave heating method to synthesize small-size ruthenium selenide (RuSe 2 ) nanoparticles loaded on the carbon nanotube (CNT) surface. This microwave reaction accomplishes ultrafast transformation (100 s) to generate RuSe 2 nanoparticles (~ 3 nm in diameter), representing one of the fastest synthetic routes for transition metal selenides. By benchmarking the HER activity, RuSe 2 @CNT exhibits excellent activity in 1.0 M KOH, requiring an overpotential of 26 mV to achieve 10 mA cm − 2 , which is better than Ru@CNT (63 mV) and the commercial Pt/C (33 mV). Moreover, RuSe 2 @CNT exhibits outstanding HER activity with an overpotential of merely 66 mV at 10 mA cm − 2 , while demonstrating remarkable stability in natural alkaline seawater media. The demonstrated microwave selenization mechanism opens new possibilities for engineering ultrafine metal chalcogenides for marine energy applications.
✓ 已验证
产品关联
DOI
高影响因子