文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第5005至5016个,产品总数347,550个

切换升序
Advanced Composites and Hybrid Materials · 2026 · IF 15.5

Plant cuticle-inspired surface functionalization of bamboo: integrating fire resistance, superhydrophobicity, and bioprotection

Peng Rui,Yu Xi,Yu Linpeng,Jiang Yuhan,Su Minglei,Zhang Rong,Yu Zixuan,Jin Xiaobei,Qin Daochun

The widespread application of bamboo, a renewable and eco-friendly material, is hindered by its inherent flammability, hygroscopicity, and susceptibility to biological degradation. Inspired by the hierarchical barrier architecture of the plant leaf cuticle, this study pioneers a cuticle-mimetic bilayer design to develop a multifunctional modified bamboo (PPCU-PDB) via a vacuum-assisted layer-by-layer strategy. This design uniquely couples a crosslinked, cutin-like inner network with a wax-like outer hydrophobic layer. A crosslinked network of polyethyleneimine, phytic acid, and copper(II) ions (PEI-PA-Cu 2+ , PPCU) was constructed on delignified bamboo as the cutin-analogous inner layer, followed by grafting with 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (PFDTS) to form the wax-like outer layer. Atomic force microscopy (AFM) and three-dimensional laser scanning microscopy revealed a cross-scale roughness hierarchy (microscale Sa = 12.00 ± 0.31 μm, nanoscale Ra = 44 ± 1.02 nm), which is crucial for stabilizing the Cassie-Baxter wetting state. The modified material achieved a limiting oxygen index (LOI) of 43.19 ± 1.10%. The peak heat release rate (P HRR ) and total heat release (THR) decreased by 50.45 ± 2.21% and 19.98 ± 1.45%, respectively, compared to untreated bamboo. A water contact angle (WCA) of 151.3 ± 1.8° confirmed superhydrophobicity, accompanied by improved dimensional stability (anti-swelling efficiency, ASE = 59.91 ± 2.34%). Antibacterial rates against Staphylococcus aureus and Escherichia coli both exceeded 99.99%, and anti-mold efficacy against Aspergillus niger reached 75 ± 0%. Notably, the biomimetic bamboo retained self-extinguishing capability (LOI′ = 35.68 ± 0.94%) and robust coating integrity even after 14 days of water leaching, a level of post-leaching flame retardancy seldom achieved by bio-based modification systems. This work provides a new cuticle-inspired paradigm for high-performance, durable, and multifunctional bamboo materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2026 · IF 2.9

Superhydrophobic cotton fabric decorated with the coatings of double hydrophobic star-shaped copolymer and PDMS for oil-water separation

Li Xin,Yu Shengming,Zhao Cailing,Song Kun,Jiang Yan,Zhang Hongwen

Owing to the numerous hazards associated with oily wastewater, superhydrophobic materials desirable for oil-water separation have attracted considerable attention. Herein, a double hydrophobic polyhedral oligomeric silsesquioxane-polystyrene (POSS-(PS) 8 ) star-shaped copolymer was synthesized by atom transfer radical polymerization (ATRP). The superhydrophobic coating for oil-water separation was prepared by PDMS anchoring POSS-(PS) 8 on the surface of cotton fabric (CF) through nonsolvent induced assembly. The influence of POSS-(PS) 8 and PDMS solution concentration on the optical properties and durability of result superhydrophobic coating were evaluated. Notably, the optimal PDMS dosage endows the superhydrophobic coating with both high optical transmittance (88.4 ± 0.3%) and high haze (87.6 ± 0.6%). Furthermore, the superhydrophobic cotton fabric (SCF) was investigated revealing it has the ability to efficiently separate various oil-water mixtures due to its superhydrophobicity, and maintain good separation efficiency even after 30 cycles. This work will provide a feasible strategy for potential application of the low cost and environmentally friendly SCF in oil-water separation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF NANOPARTICLE RESEARCH · 2026 ·Vol. 28 ·期 6 ·165 · IF 3.5

Performance of tunable Fe-N-C-based oxygen reduction reaction catalysts prepared based on ZIF-8

Yang Menghui,Gao Zhen,Zhan Haoyu,Bi Mengqi,Huang Naibao,Zhang Junjie,Gan Ziqi,Wang Hao

Developing highly active, durable, and cost-effective oxygen reduction reaction (ORR) catalysts is crucial for fuel cell commercialization through the use of non-precious metal alternatives to platinum. In this study, the tunable dodecahedral Fe-N-C catalysts were synthesized through controlled pyrolysis of Fe-doped zeolite imidazolate framework-8 (ZIF-8) precursors. The optimized 5% Fe@NC-8 catalyst demonstrates excellent ORR performance with an onset potential of 0.92 V vs. RHE, a half-wave potential (E 1/2 ) of 0.83 V vs. RHE, and a limiting diffusion current density (j d ) of 6.06 mA cm −2 , surpassing commercial 20% Pt/C catalysts (onset potential 0.89 V vs. RHE; E 1/2 0.81 V vs. RHE; j d 4.27 mA cm −2 ). It also shows strong durability, retaining 86.16% of its current after prolonged polarization (@0.80 V vs. RHE for 10,000 s) and minimal negative shift in half-wave potential after extensive cycling(@200 mV s −1 for 5000 CV cycles). The enhanced catalytic performance is attributed to (i) possessing a high specific surface area (319 m 2  g −1 ) and favorable porosity to maximize active site accessibility; (ii) having abundant active sites of Fe-N x , graphitic N, and pyridinic N as active catalytic centers; and (iii) forming N-doped carbon matrices to provide a conductive framework. These advantages boost the density of accessible active sites and thus remarkably improve the ORR catalytic activity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2026 · IF 4.6

Biomimetic all-weather dual-mode cooling film for passive heat dissipation

Li Zhen,Yang Jinqiu,Zeng Xiangdong,Xiong Zhengfeng,Li Jingjia,Su Xiuping,Li Yadong,Liu Feng

Passive radiative cooling technology offers a zero-carbon comfort solution for maintaining comfortable ambient temperatures. However, single-mode passive radiative cooling is significantly weakened by the shielding effect of high-humidity environments. Inspired by the thermoregulatory mechanisms of plant leaves, we designed a dendritic structure of amino-functionalized cellulose (ACE) for passive heat dissipation. ACE provides abundant amino groups and Schiff base sites, which not only enhance interactions with water molecules through hydrogen bonding but also facilitate solar radiation absorption via the stretching vibrations of the imine bonds (-C=N-). Leveraging these properties, an ACE@PVA dual-mode cooling film was fabricated using self-assembly technology. Despite its ultrathin profile (80 μm), the film achieves a hygroscopic capacity exceeding 3.32 ± 0.36 g/g and a solar reflectivity of 43.6 ± 2.1%. Under outdoor conditions, the film demonstrated excellent passive cooling performance, achieving subambient cooling of 4.7 °Cto 13.7 °Cduring daytime and 4.3 °Cat night. This ultrathin, dual-mode cooling film is well suited for dynamic seasonal and weather variations, achieving a theoretical cooling power of 142.9 W/m 2 , offering significant potential for mitigating the energy crisis and reducing greenhouse gas emissions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS RESEARCH · 2026 · IF 2.9

Construction of S-scheme Ag/CdS/Fe2O3 heterojunction for photocatalytic degradation of amoxicillin under visible light

Zuo Guangling,Ye Hongyong,Du Jia,Ding Xin

An S-scheme Ag/CdS/Fe 2 O 3 (Ag/CS/FO) heterojunction was fabricated via a sequential solvothermal and photodeposition method. The microstructure and optoelectronic properties of the synthesized ternary composite were verified by a series of characterization methods. The transfer of photogenerated electron–hole pairs (e − /h + pairs) follows an S-scheme pathway, driven synergistically by the interfacial electric field (IEF) and band bending. That directs electrons (e − ) to the conduction band (CB) of CdS (CS) and holes (h + ) to the valence band (VB) of Fe 2 O 3 (FO), achieving efficient e − /h + pairs separation while maintaining high redox capabilities. Additionally, the incorporated Ag nanoparticles enhance visible-light harvesting via the surface plasmon resonance (SPR) effect and function as electron-transfer bridges, collectively promoting charge migration. Consequently, the composite exhibits high photocatalytic activity, degrading 98.68% of amoxicillin (AMX) under visible light. It also maintains 91.6% efficiency after four cycles, confirming sound stability. Notably, the material demonstrates superior performance in real-life water matrices (tap and river water), highlighting its strong application potential. Graphical abstract The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF POLYMER SCIENCE · 2026 · IF 4.6

On-demand Peelable UV-curable Adhesives with Superior Bonding Strength: Rational Molecular Engineering of Cohesion-adhesion Synergy

Liu Wen-Qian,Wang Peng,Yuan Hao-Kai,Zhang Lin,Chen Bin,Jiang Hong-Fei,Wang Yi-Ran,Wang Lu,Li Shu-Sheng,Zong Chuan-Yong

On-demand peelable adhesives represent a pivotal green chemistry research avenue; however, they confront a critical challenge in reconciling robust interfacial bonding strength with efficient peelability. Herein, a cohesion-adhesion synergy-guided molecular engineering strategy was developed to fabricate UV-curable adhesives with the integrated properties of superior bonding strength and hot water-triggered peelability. The adhesive was formulated with custom-synthesized difunctional polyurethane acrylate (PM1) as the crosslinker, which was blended with complementary acrylate monomers. PM1 constructed a robust yet adaptable crosslinking network to ensure high cohesive strength; its polytetrahydrofuran diol- and polyester diol-derived soft segments endowed the network with superior molecular chain mobility and stress dissipation capacity. Additionally, the incorporation and compositional optimization of polar acrylate monomers modulate the cohesive energy, surface wettability, and interfacial adhesion of the substrate, thus realizing synergistic enhancement of the cohesive and adhesive properties. Systematic experimental investigations and molecular dynamics simulations were conducted to determine the structure-property relationships governing the composition, bonding performance, and mechanical properties of UV-curable adhesives. The optimized formulation achieved high shear strength (>5 MPa, glass substrates), excellent mechanical properties (tensile strength: 12.80 MPa, elongation at break: 313.70%), and good thermal stability (5 wt% weight-loss temperature > 240 °C). Notably, the developed adhesives realize rapid, complete, and residue-free debonding within 3 min of immersion in 60 °C water, where hydration-induced disruption of adhesive-substrate contact attenuates interfacial interactions. Additionally, the peeled adhesive can be recycled repeatedly after drying while retaining its excellent interfacial bonding performance. This study provides a versatile and scalable strategy for the rational design of high-performance functional adhesives, thereby paving the way for recycling electronic products and sustainable manufacturing. The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF POLYMER SCIENCE · 2026 · IF 4.6

Processable Main-chain Benzoxazine Resin Derived from Daidzein with Intrinsic Flame Retardancy

Hu Chao-Fan,Dai Jin-Yue,Liu Jing-Kai,Wang Shuai-Peng,Jia Li,Zhang Hui,Liu Xiao-Qing

The development of intrinsically flame-retardant, low-smoke, low-toxicity, and halogen-free polymers represents a critical challenge. In this study, bio-based daidzein was employed as a partial phenolic source, and a series of main-chain benzoxazine resins (Dz-Ph-ddm) was synthesized via Mannich condensation with phenol, 4,4′-diaminodiphenylmethane, and paraformaldehyde. The effects of daidzein content on the thermal stability, flame retardancy, mechanical properties, and char-forming behavior of cured resins were investigated. The results indicate that the rigid aromatic structure and benzopyranone unit of daidzein significantly promoted the formation of a dense and continuous char layer, achieving gas- and condensed-phase synergistic flame retardancy. With 20 mol% of daidzein addition, the resin exhibited a glass transition temperature ( T g ) of 259.6 °C, the char yield at 800 °C increased by 42.5% compared to the control group, a UL-94 V-0 rating, and a 30.9% reduction in total heat release (THR) in cone calorimetry tests. The glass fiber-reinforced composite prepared using this resin as the matrix showed a 100.6% improvement in impact strength, with flexural and compressive strengths reaching 748.4 and 340.8 MPa, respectively. Moreover, it demonstrated good fire safety performance even in an 80 kPa low-pressure combustion environment. This work provides a facile strategy for the preparation of high-performance eco-friendly flame-retardant composites. The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Advanced Fiber Materials · 2026 · IF 22.6

Sensitive 0D-1D Piezoelectric Perceptron Enable Machine Tactile for 3D Recognition

Ye Guomin,Chen Yi,Zhang Xinyang,Yang Nailiang,Wan Yanfen,Yang Peng

To overcome the limitations of conventional three-dimensional (3D) reconstruction methods in capturing detailed morphology and achieving rapid response, this study proposes a dimensionally hybridized zero-dimensional-one-dimensional (0D-1D) architecture inspired by Hertzian contact mechanics. Through finite element analysis, we identified that the 0D-1D contact mode achieves an optimal balance between stress concentration and distribution, with a moderate peak stress of 246.7 Pa, in contrast to the high-but-localized stress in 1D-1D and the overly dissipated stress in 0D-0D contacts. Guided by this insight, 0D Polyvinylidene fluoride (PVDF) microspheres are strategically deposited via electrospray onto both sides of an electrospun 1D PVDF nanofiber network. This hierarchical structure promotes efficient stress transfer, enhances dipole alignment, and improves charge generation efficiency, resulting in a 122.6% increase in pressure sensitivity, a broad sensing range (3-510 kPa), and exceptional cyclic stability, which retained 96.6% after 10000 cycles. Integrated with an artificial neural network, the sensor achieves 90.5% accuracy in classifying sliding trajectories, 99.3% accuracy in real-time 3D contour recognition, and 100% accuracy in 3D contour reconstruction. These results underscore its strong potential for advanced applications in intelligent robotics, wearable electronics, and human-machine interfaces. Graphical The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Advanced Composites and Hybrid Materials · 2026 · IF 15.5

Interfacial engineering of flower-like Fe₃O₄@C/FRGO multiscale heterostructures for broadband and efficient microwave absorption

Yang Cao,Luo Jialiang,Wang Yue,Xue Yiqing,Liu Guigao,Lu Zhehong,Wang Suwei,Jiang Wei

Rational microstructure design and compositional regulation have emerged as effective pathways to enhance electromagnetic wave (EMW) absorption, However, simultaneously achieving strong absorption, broad bandwidth, thin thickness and low filler loading remains challenging. Herein, three-dimensional hierarchical heterostructures comprising amorphous carbon-wrapped magnetite supported on flower-like reduced graphene oxide (Fe₃O₄@C/FRGO) was constructed through spray-drying assembly, spatially confined solvothermal crystallization, and defect-modulated carbonization. By tailoring the reduction degree of FRGO and tuning ferrite composition through thermal treatment, the dielectric-magnetic properties and interfacial interactions are precisely regulated. With merely ≈ 3.26 wt% incorporation of FRGO, the optimized composite exhibits a minimum reflection loss (RL min ) of -66.29 dB at 1.94 mm (20 wt% filler) and a broad effective absorption bandwidth (EAB) of 6.60 GHz (11.30–17.90 GHz) at 2.73 mm (30 wt% filler). This exceptional performance is attributed to the engineered heterointerfaces that facilitate multi-path energy dissipation via magneto–dielectric coupling optimized impedance matching, intensive interfacial polarization from abundant hierarchical architectures and the flower-like structure induced multiple scatterings. This study highlights the pivotal role of interfacial engineering in heterostructured absorbers and offers a design paradigm for high-performance EMW-absorbing materials through coordinated component–structure modulation. Graphical abstract The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF POLYMER SCIENCE · 2026 · IF 4.6

Sodium Carboxymethyl Cellulose/Polypyrrole Nanoparticle-doped Conductive Hydrogel for Self-powered Flexible Strain Sensors and Signal Transmission

He Jie,Hu Chang-Ning,Yang Zhou-Ya,Yang Hui,Peng Yin-Jie

Conductive hydrogels, with their excellent flexibility and tunable electrical conductivity, have shown broad application prospects in emerging fields such as flexible strain sensors and triboelectric nanogenerators (TENG). In this study, a conductive sodium carboxymethyl cellulose (CMC)/ polypyrrole (PPy)/polyacrylamide (PAM)(CPA) hydrogel was developed by integrating a CMC/PPy composite, synthesized via in situ polymerization, into a hydrophobic-associated polyacrylamide network. This hydrogel exhibits excellent mechanical properties, with a tensile strain as high as 1735%, demonstrating extremely high ductility and deformation capacity. The flexible sensor based on CPA hydrogel has a wide detection range (0%–500%) and can monitor the movements of various parts of the human body. In addition, the TENG assembled based on CPA hydrogel achieves stable electrical output performance, enabling it to power small wearable electronic devices and promote self-powered signal transmission, showing broad application prospects in the fields of intelligent human-machine interaction and wearable electronics. The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2026 ·Vol. 156 ·期 7 ·190 · IF 2.5

Fabricating Fibrous Network Aerogel of ZIF-67 Nanoflower Loaded with Nano Co2B and Cellulose Nanofiber for Catalytic NaBH4 Hydrolysis

Tan Zhe,Li Wenzhuo,Shangguan Hanlu,Wang Huixing,Wang Yufeng,Cheng Lei,Sun Lixian,Yan Puxuan

Aerogels are attractive for catalytic applications due to their ultra-low density and high surface area. Here, we prepare a novel composite aerogel integrating chitosan, cellulose, carbon nanofibers, and micron-sized Co 2 B@ZIF-67 catalyst via sol-gel and freeze-drying methods. The free-standing Co 2 B@e-ZIF-67 exhibits a hydrogen generation rate of 13,701.1 mL min⁻ 1 g⁻ 1 , attributed to the uniform immobilization of Co 2 B active species within the ZIF-67 framework, which prevents agglomeration and maximizes active site exposure. When embedded in the aerogel, the catalyst achieves a hydrogen generation rate of 9,811.7 mL min⁻ 1 g⁻ 1 , with an active site exposure efficiency of 71.7% and a low mass loss of 7.9% after reaction. The aerogel’s chemically crosslinked network ensures uniform catalyst dispersion and structural stability. Moreover, the use of natural polysaccharides (chitosan and cellulose) as the aerogel skeleton provides inherent biodegradability and recyclability, making this system a promising candidate for sustainable catalytic hydrogen production. Graphical The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2026 · IF 2.6

A programmable multifunctional DNA hydrogel enabling integrated detection and inactivation of Staphylococcus aureus

Wentong Yu,Ziyan Zhao,Chunyuan Huo,Zhiqiang Guo,Xinru Ren,Su Liu,Yu Wang,Jiadong Huang

Herein, we report a multifunctional DNA hydrogel (TBDH) platform that integrates the specific detection and efficient inactivation of S. aureus within a single programmable architecture. The platform consists of three core components: an aptamer (Apt) for target recognition, two DNA signaling strands (SA and SB) for fluorescence transduction, and self-assembled antibacterial nanoparticles (TBNPs). Through rational structural integration, these elements are incorporated into a tunable polymeric network, enabling a unified “recognition–reporting–inactivation” function. In the presence of S. aureus, Apt binding triggers hydrogel dissociation, restoring the quenched Cy3 fluorescence and generating a dose-dependent signal with a detection limit of 11 CFU mL−1. Simultaneously, hydrogel collapse induces on-demand release of TBNPs, which exhibit potent antibacterial and anti-biofilm efficacy (>99.9% inactivation) by disrupting bacterial membrane integrity. The TBDH platform demonstrates high specificity, rapid response (90 min), and reliable performance in complex matrices. This work provides an integrated, stimuli-responsive strategy for simultaneous pathogen detection and eradication, offering promising potential for applications in food safety and clinical infection control.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。