文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第493至504个,产品总数1,048个

切换升序
硒粉
Journal of Science-Advanced Materials and Devices · 2021 · IF 5.469

Large-scale preparation of ultra-long ZnSe–PbSe heterojunction nanowires for flexible broadband photodetectors

Jianping Deng,Wenlei Lv,Pengchao Zhang,Wendeng Huang

Flexible photodetectors show great applications in wearable electronics such as health monitoring and the Internet of Things. In this study, we have prepared ultralong ZnSe–PbSe heterojunction nanowires with a length of 20 μm in gram-scale by an in-situ cation exchange reaction. The produced PbSe nanoparticles on the ZnSe nanowire configuration are close to an ideal heterojunction system due to the small lattice mismatch of 7.4% in the (111) direction. The Ohmic contact is formed for nanowire photodetectors. The ZnSe–PbSe heterojunction nanowire photodetector exhibits a broadband photoresponse with the peak responsivity of 40 A W −1 while the ZnSe nanowire photodetector shows a narrowband photoresponse of 5 A W −1 , as a result of its extended absorption across the entire UV-visible-NIR. Electrons are transported from PbSe to ZnSe while holes are trapped at PbSe, and electrons are extracted to an external circuit by an Al electrode, resulting in a high gain of the photoconductor. The broadband photoresponse, the large linear dynamic range of 66 dB, the fast response speed of 0.02 s and the protracted cycle of 5000 show the feasibility of the flexible heterojunction photodetector.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2021 · IF 6.707

Anions influence on the electrochemical performance of Co3X4 (X = O, Se) for supercapacitor: Experiments and theoretical calculations

Pei Zhu,Yan Wang,Minghang Zhang,Yingdong Wu,Wangfeng Cai

In order to investigate the influence of the anions on the electrochemical performance of cobalt-based compounds, Co 3 O 4 and Co 3 Se 4 are studied and theoretically analyzed with the density functional theory (DFT). Avoiding of the traditional synthesis of the high-temperature annealing for the transition metal oxides, the cubic spinel phase Co 3 O 4 on a nickel foam (NF) substrate with a simple two-step hydrothermal method and Co 3 Se 4 with the core-branched structure by anions exchange method are prepared. The electrochemical measurements show that the capacitance and conductivity of Co 3 Se 4 are significantly better than those of Co 3 O 4 , and Co 3 Se 4 still maintain high capacity at high current density. Furthermore, the kinetics of electrode material Co 3 O 4 and Co 3 Se 4 are analyzed and compared. According to the calculation of the density of states, the results show the band gap of Co 3 O 4 is 2.18 eV and the Fermi energy line of Co 3 Se 4 enters into the conduction band, which means the conductivity of Co 3 Se 4 is better than that of Co 3 O 4 . Additionally, three redox reactions during the charge and discharge process of Co 3 O 4 are determined and the band gaps changes are also calculated.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2021 ·Vol. 45 ·期 46 ·21888-21895 · IF 3.591

Bismuth metal organic framework-derived Bi2Se3@C for high performance supercapacitors

Hengjie Qin,Ying Lv,Ping Li,Meixia Xiao,Haiyang Song,Qian Zhang,Jialun Yang

A series of Bi2Se3@C materials were prepared through a bismuth metal organic framework (CAU-17) assisted hydrothermal selenization method followed by carbonization, which have been found to be useful as electrode materials for supercapacitor application. The Bi2Se3@C obtained below 500 °C seems to show an excellent specific capacity of 565.9 C g−1 at a current density of 1 A g−1. Furthermore, the performance of Bi2Se3@C in symmetrical supercapacitors (SSCs) is also systemically investigated, and the SSC device achieves a maximum energy density of 39.3 W h kg−1 at a power density of 639.9 W kg−1 and maintains 90.5% of this capacity over 1000 cycles.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ELECTROANALYTICAL CHEMISTRY · 2021 · IF 4.464

Synthesis of graphene oxide supported CoSe2 as high-performance supercapattery electrodes

Chengchao Wang,Weigang Zheng,Ze Wang,Zheng-Zhi Yin,Yong Qin,Yong Kong

We report on the facile synthesis of graphene oxide (GO) supported CoSe 2 (CoSe 2 /GO) used for high-performance supercapattery electrodes. CoSe 2 is first synthesized through the selenylation of a typical zeolitic imidazolate framework (ZIF-67), which is then decorated on the surface of GO via the hydrothermal method. The characterizations of SEM, TEM, XRD and XPS further confirm the successful decoration of GO with CoSe 2 . The electrochemical performances of the as-synthesized CoSe 2 /GO are investigated, and the results indicate that the CoSe 2 /GO exhibits considerable specific capacity (108.31 mAh g −1 at 1 A g −1 ) and high cyclic stability (capacity retention of 91.2% after 5,000 cycles). Compared with GO and CoSe 2 alone, the greatly enhanced electrochemical performances of the CoSe 2 /GO might be attributed to the synergistic effect of GO and CoSe 2 . These findings suggest that the developed CoSe 2 /GO could be a potential candidate to be used as high-performance supercapattery electrode materials.

CAS / MDL: 693-98-1 7782-49-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Applied Materials Today · 2021 · IF 10.041

Interfacial hetero‐phase construction in nickel/molybdenum selenide hybrids to promote the water splitting performance

Wenshuai Feng,Manman Bu,Shuting Kan,Xiaohui Gao,Aimin Guo,Hongtao Liu,Lianwen Deng,Wei Chen

In this work, a novel hetero-phase interface structure (NiMoSe/NF-2), consisting of crystalline (NiSe) and amorphous (MoSe x ), was constructed by annealing Ni 0.85 Se/MoSe x hybrid (NiMoSe/NF-1), synthesized through hydrothermal and selenylation steps. For hydrogen evolution and oxygen evolution reaction, the NiMoSe/NF-2 exhibited an overpotential of 91 mV (10 mA cm −2 ) and 307 mV (100 mA cm −2 ) with the Tafel slope of 48.1 mV dec −1 and 30.9 mV dec −1 , respectively, superior to NiMoSe/NF-1. Meanwhile, much higher stability with 10 and 14 h tests was also respectively achieved for HER and OER. Using the NiMoSe/NF-2 as anode and cathode, the electrolyzer showed a long-time stability up to 14 h with the current density of 100 mA cm −2 at the potential of 1.91 V for overall water splitting. The density functional theory calculation validates that the crystalline/amorphous hetero-phase structure remarkably reduces the Gibbs free energy difference for both HER/OER and the increased occupation densities of electronic states near Fermi level accelerated charge transfer rate during electrocatalytic process. The hydrogen and oxygen intermediates desorption are facilitated by the downshift of Ni d-band center. The proposed crystalline/amorphous hetero-phase structure is prospective for designing bifunctional catalysts for water splitting.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nanoscale · 2021 ·Vol. 13 ·期 39 ·16487-16498 · IF 7.79

Metastable marcasite NiSe2 nanodendrites on carbon fiber clothes to suppress polysulfide shuttling for high-performance lithium–sulfur batteries

Jingwen Wang,Shoufu Cao,Likun Yang,Yan Zhang,Kun Xing,Xiaoqing Lu,Jun Xu

The incorporation of catalytic components is a promising strategy to promote redox reaction kinetics and suppress polysulfide shuttling for high-performance lithium–sulfur batteries (LSBs). In this work, metastable marcasite NiSe2 nanodendrites grown on carbon fiber clothes (m-NiSe2/CFC) were synthesized to improve chemical adsorption and electrocatalytic activity towards lithium polysulfides. The multifunctional m-NiSe2/CFC film was utilized as both the interlayer and the three-dimensional (3D) current collector in LSBs. In comparison with the stable pyrite NiSe2 nanodendrite–covered CFC (p-NiSe2/CFC) counterpart, the m-NiSe2/CFC film exhibits even stronger chemisorption, higher catalytic activity and faster reaction kinetics, thereby resulting in significantly improved lithium storage performance. The Al@S/rGO@m-NiSe2/CFC cell has a high reversible capacity of 1646 mA h g−1 at 0.2C, a high QL/QH ratio of 3.00 at 0.2C, a high rate capability of 900 mA h g−1 at 4C, and an outstanding cyclic stability exhibiting a low capacity decay of 0.028% per cycle for 600 cycles at 4C. Moreover, a symmetrically sandwiched cathode of m-NiSe2/CFC@S/rGO@m-NiSe2/CFC was designed for high sulfur loading LSBs (4.5 mg cm−2) with superior electrochemical performance of 3.73 mA h cm−2 after 100 cycles at 1C rate. Our work opens up a new opportunity to enhance the electrochemical performance of LSBs by phase engineering of NiSe2 catalysts in sandwiched structural cathodes.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2019 · IF 4.175

Se molarity tuned composition and configuration of Ni3Se2/NiSe core-shell nanowire heterostructures for hydrogen evolution reaction

Hong-Bo Wang,Yang-Shuo Sun,Fei Ma,Liang Zhou,Hui-Feng Li,Long Zhang,Guan-Jun Chen,Yi-Ku Xu,Yong-Nan Chen,Ke-Wei Xu,Da-Yan Ma

Well-arranged heterogeneous interface is favored to enhance the electrocatalytic activities to utilize the synergistic effects of different crystalline phases. In this work, vertical aligned single crystal Ni 3 Se 2 nanowires (NWs) wrapped by ultra-thin NiSe nanoflakes (NFs) with well-arranged heterogeneous interfaces along axial direction were successfully in situ grown on nickel foam (Ni foam) by a simple one-step hydrothermal method without posttreatment. The growth of Ni 3 Se 2 NWs follows a surface reaction mechanism by which NiSe reacts with reactive Ni · atoms on surface lattice steps of Ni 3 Se 2 nucleuses to grow both along radial and axial directions. The configurations of the products can be tuned from NiSe NFs to the core-shell NWs dominated structures by solely modulating Se molarity in chemical precursors motivated by the accelerated reaction kinetics. The hydrogen evolution reaction (HER) performance was improved with the increase of Se molarity attributing to the increased coverage of high aspect Ni 3 Se 2 /NiSe core-shell NWs arrays, metallic conductive feature of Ni 3 Se 2 skeleton and well-arranged heterogeneous interfaces along the axial direction. The Ni 3 Se 2 /NiSe core-shell NWs with well-arranged heterogeneous interfaces may also be beneficial to other energy or environmental applications.

CAS / MDL: 7782-49-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2019 · IF 2.931

Rapid ratiometric detection of Cd2+ based on the formation of ZnSe/CdS quantum dots

Zhi-Qiang Zhou,Yuan-Ping Liao,Jing Yang,Shan Huang,Qi Xiao,Li-Yun Yang,Yi Liu

Developing simple and sensitive non-aggregation strategy for detecting Cd 2+ is necessary for improving the selectivity and sensitivity of probe. Here, we establish a simple, rapid and ratiometric strategy for the recognition of Cd 2+ based on the formation of core-shell ZnSe/CdS structure using ZnSe quantum dots (QDs). The transformation from binary ZnSe QDs to core-shell ZnSe/CdS QDs both change the elemental composition and structure of ZnSe QDs, leading to the changes in band gap of ZnSe QDs, which could be observed in the UV–vis spectra. In the detection process, ZnSe QDs only possess absorption peak at 343 nm, the formation of ZnSe/CdS after the addition of Cd 2+ leads to the appearance of the new peak at 397 nm, while other heavy metal ions could not cause the appearance of new absorption peak. Therefore, this strategy shows good selectivity for Cd 2+ detection. Based on this strategy, the limit of detection (LOD) for Cd 2+ is 11 nM by UV–vis spectroscopy with a desirable relation of linearity (R 2  = 0.999) between A 397 /A 343 and Cd 2+ contents, which is superior to the LOD of most reported nanomaterials . The response time for Cd 2+ detection is as short as 60 s, which is suitable for rapid detection. This ratiometric probe has also been applied to the detection of Cd 2+ in tap water samples, the recovery of Cd 2+ was between 94.9% and 105.6% for tap water samples, indicating the high accuracy of our ratiometric assay. Our strategy not only provided a new method for detecting Cd 2+ , but also put forward an implication that the band energy changes of QDs caused by heavy metal ions can be applied in the selective and sensitive detection of heavy metal ions.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2019 · IF 8.355

Novel MoSe2/MoO2 heterostructure as an effective sulfur host for high-performance lithium/sulfur batteries

Qiuyan Hao,Guoliang Cui,Yongguang Zhang,Jingde Li,Zisheng Zhang

Despite their high theoretical capacity (1672 mAh g −1 ) and energy density (2600 Wh kg −1 ), the commercialization of lithium/sulfur (Li/S) batteries is hindered by the polysulfide shuttle phenomenon and sluggish electrode kinetics. Herein, we demonstrate a novel MoSe 2 /MoO 2 heterostructure via water-steam etching as an effective sulfur host for high-performance Li/S batteries. The as-prepared flower-like MoSe 2 /MoO 2 heterostructure exhibited strong affinity toward polysulfide intermediates with a strong adsorption energy of −3.46 eV, rendered by MoO 2 , and enhanced the redox kinetics significantly. Consequently, S/MoSe 2 /MoO 2 electrode, with 66% sulfur content, delivered a high initial capacity of 1100 mAh g −1 and high capacity retention of 77.1% after 500 cycles at 0.5 C. The synthesis of MoSe 2 /MoO 2 heterostructure presents a promising strategy to design sulfur hosts for high-performance Li/S batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2019 · IF 8.456

Electronic Structure and Crystalline Phase Dual Modulation via Anion–Cation Co-doping for Boosting Oxygen Evolution with Long-Term Stability Under Large Current Density

Jian Chen,Jianpo Chen,Hao Cui,Chengxin Wang

Designing a state-of-the-art nonprecious oxygen evolution reaction (OER) electrocatalyst with ultralong stability under high current density (≥100 h under 1000 mA cm–2) is greatly desirable for the viable electrolysis of water. The synthesis of nanostructure catalysts is an effective method for improving the OER performance, but nanostructure-based catalysts are easily destroyed by mechanical force via the vigorous oxygen gas evolution process at a high current density. Herein, we present a facile strategy of N-anion and Fe-cation dual doping to construct a three-dimensional self-supported nickel selenide film-based catalyst via a one-step chemical vapor deposition process. The film exhibits outstanding OER activity with a small Tafel slope of 34.86 mV dec–1 and an overpotential of 267 mV at 100 mA cm–2 in 1 M KOH media. Impressively, the film-based catalyst can maintain this excellent catalytic activity over 100 h, even when operated at a high current density of 1 A cm–2, thus exhibiting the best reported OER stability under high current density so far. Further studies reveal that anion–cation co-doping can simultaneously modulate the electronic state and phase structure of nickel selenide, thereby promoting the in situ formation and transformation of oxygen-vacancy-rich amorphous OER active species and resulting in the superior OER performance of the film-based catalyst.

CAS / MDL: 57-13-6 7782-49-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。