JOURNAL OF CLINICAL INVESTIGATION
·
2026
·
IF 14.3
Gengmiao Xiao,Aijun Qian,Zhuo Gao,Tingting Dai,Hui Liang,Shuai Wang,Mulan Deng,Yunjing Yan,Xindan Zhang,Xuedi Zhang,Yunping Mu,Jiqiu Wang,Aibo Gao,Huijie Zhang,Fanghong Li,Allan Zijian Zhao
Aging commonly causes decline of testosterone or estrogen, leading to overaccumulation of fatness in males or females, respectively. Although such phenomenon can be readily explained by estrogen’s direct action on adipocytes in females, accumulative evidence does not support the direct action of testosterone in adipocyte lipid metabolism, suggesting that there is a missing intermediary link. Herein, we propose that glycoprotein hormone β5 (GPHB5) is the intermediary linkage between testosterone and the regulation of adiposity. In clinical samples, blood levels of GPHB5 were correlated negatively with men’s ages, and positively with circulating testosterone. Testosterone directly stimulated the expression of GPHB5 in cultured cells, pharmacological blockade of androgen receptor (AR) functions abrogated such effect. Knockout of AR led to not only development of obesity but also reduction of GPHB5 expression. Genetic ablation of GPHB5 in the males, but not in the females, lowered the browning of white adipose tissue, diminished energy expenditure and caused severe obesity. Importantly, elevated blood testosterone didn’t exert its catabolic actions in GPHB5 null mice, and yet, recombinant GPHB5 protein was able to stimulate energy expenditure and reduce adiposity. Taken together, these results provided the strong proof that GPHB5 is the “missing” intermediary hormone linking testosterone (and aging) and its well-known catabolic effect on adipose tissue.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
International Journal of Biological Sciences
·
2026
·Vol. 22
·期 4
·1775-1792
·
IF 10
Shen Siman,Ying Chen,Fu Xinglin,Zeng Xiaobian,Guo Xiuli,Wu Han,Zhang Liangqing,Xu Li
Background: Persistently elevated glycolysis is increasingly recognized as a driving force in diabetic kidney disease (DKD). As a product of glycolysis, lactate can induce histone lactylation, an emerging epigenetic mechanism associated with post-transcriptional modification. However, the molecular mechanism and clinical impact of histone lactylation in DKD remain largely understood.Methods and Results: Spatial transcriptomics analysis revealed upregulation of glycolytic genes in tubular epithelial cells (TECs), thus leading to elevated levels of renal lactate accumulation. PKM2 deficiency lowered the lactate production during the fibrotic process and decreased histone lactylation. Mechanistically, ChIP-seq & RNA-seq results showed lactate promoted histone H4 lysine 12 lactylation (H4K12la), which in turn enhanced RUNX1 transcription. RUNX1 subsequently activated HK1 and SLC2A1, which accelerated glycolysis and renal fibrosis of DKD. Further, SIRT3 expression was significantly decreased in the renal tubular cells in DKD. Furthermore, insufficient SIRT3 is functionally promote renal fibrosis by directly deacetylating RUNX1 at H4K12, leading to attenuated glycolytic process, and subsequently robust glycolytic ability and increased production of lactate.Conclusion: Thus, the study links RUNX1-mediated glycolysis to SIRT3-mediated histonelactylation epigenetic reprogramming in promoting the fibrotic process, providing better understanding of epigenetic regulation of DKD pathogenesis, and new therapeutic strategy for DKD.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CONTROLLED RELEASE
·
2026
·
IF 11.5
Xianmin Shi,Zijun Lin,Danni Xiao,Wanzhen Li,Jue Wang,Yuanfeng He,Conghan Wang,Gengsheng Ye,Yao Liu,Yanjuan Huang,Chunshun Zhao
Glaucoma filtration surgery (GFS) frequently fails due to uncontrolled subconjunctival scarring, driven by a cascade of postoperative inflammation, oxidative stress, and exaggerated myofibroblast activation. To address this, we developed an in-situ light-triggered hydrogel that enables strong conjunctival adhesion, bleb mechanical support, and pathology-responsive smart drug delivery for effective bleb scarring inhibition. The crosslinked hydrogel system prepared from functionalized carboxymethyl chitosan and epigallocatechin gallate (EGCG), prior to ultraviolet light (UV) exposure, was denoted as PNE hydrogel. After injection, PNE can adapt to ocular anatomy, and subsequent transconjunctival light exposure rapidly activates hydrogel crosslinking and covalent tissue adhesion, generating a mechanically robust hydrogel, denoted as PNE-UV hydrogel. Meanwhile, light-induced surface property changes further enhance conjunctival adhesion and reduce interface inflammatory cell infiltration. Concurrently, light-induced hydrophilic-to-hydrophobic hydrogel surface transition promotes water exclusion, further enhancing tissue adhesion to minimize interface inflammatory cell infiltration. With adequate mechanical strength, rapid self-healing, and good biosafety, PNE-UV provides essential mechanical bleb support during wound healing. Crucially, elevated postoperative reactive oxygen species (ROS) triggers intelligent EGCG release for over 17 days, which not only effectively scavenges ROS and promotes macrophage M1-to-M2 polarization to mitigate inflammation, but also suppresses TGF-β1-induced conjunctival fibroblast-to-myofibroblast transdifferentiation and myofibroblast proliferation. In a rabbit model of filtration surgery, PNE-UV hydrogel significantly prolonged bleb survival, reduced intraocular pressure, and decreased collagen deposition via mitigating oxidative stress and inflammation and suppressing fibrotic processes. Collectively, this interfacial adhesion and precise immunomodulation hydrogel presents an effective and clinically translatable strategy for post-GFS scarring prevention.
✓ 已验证
DOI
PubMed
高影响因子
WATER RESEARCH
·
2026
·
IF 12.4
Liu He,De-Xiu Wu,Wen-Min Wang,Xiao Xiao,Wei-Yu Li,Wen-Long Wang,Qian-Yuan Wu
Halobenzoquinones (HBQs) are an emerging class of unregulated disinfection byproducts with high toxicity and resistance to conventional treatment, yet their fate during digestion remains unclear. Here, we systematically investigated the removal, transformation and toxicity change of HBQs mediated by digestive enzymes (salivary amylase, pepsin, and trypsin). Simulated digestion markedly accelerated HBQs removal, with intestinal digestion achieving the highest efficiency (87.1–96.0%). The k obs for HBQs removal during simulated oral, gastric, and intestinal phases were 0.1247–0.3187 h⁻¹, 0.0890–0.1290 h⁻¹, and 0.3843–0.5869 h⁻¹, respectively. Among HBQs, 2,6-DCBQ exhibited the strongest binding affinity to the three enzymes, as evidenced by its higher binding constants and greater number of binding sites. QM/MM simulations revealed that enzyme-induced polarization decreased E LUMO , increased the electrophilicity index (ω), and expanded the electrophilicity gap between unsubstituted and chlorinated carbons. Transformation product analysis revealed that enzyme-driven conversion of the C=O bond to –CH–OH occurred, and HBQs were found to form covalent adducts with digestive enzymes through reactions with -SH and -NH 2 groups. Colon organoid assays demonstrated that trypsin mediated degradation was 1.20–2.06 times more effective than cysteine mediated degradation in reducing HBQs cytotoxicity and 1.14–1.50 times more effective in reducing genotoxicity, by forming low oxidative stress products. However, the toxicity was not completely eliminated. These findings highlight the critical role of digestive enzymes in HBQs removal, transformation and toxicity change, providing new insight into human health risk assessment of drinking water contaminants.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 15.7
Wang Shenglong,Deng Weili,Huang Haichao,Yan Zhuocheng,Wang Yongbin,Zhou Tingting,Ao Yong,Wang Zihan,Zhang Jiabin,Tian Guo,Lan Boling,Sun Yue,Xu Tianpei,Yang Tao,Huang Longchao,Jin Long,Lu Jun,Yang Weiqing
Titanium carbide MXene flakes hold great promise for system-level MXene-based electronics (MXetronics) due to their outstanding electrical conductivity and diverse functional properties. However, the weak MXene interlayer bonding often causes film fracturing under mechanical strain, ultimately leading to device failure, manifested as unstable operation, inaccurate data transmission, and potential electrical disconnection. Here, we present strain-invariant, omnidirectionally stretchable MXetronics (sos-MXetronics) through hierarchical stiffness microgrid engineering. This strategy synergistically integrates patterned elastiff regions and modulus-buffered interconnects, effectively preventing performance shifts in sos-MXetronics. This circular sos-MXetronics with a radius of 3.3 cm integrates a near-field communication (NFC) antenna, eight micro-supercapacitors (MSCs), three resistive sensors, and interconnected conductive networks, demonstrating exceptional strain invariance with 95–98% performance retention even under 40% strain. With the capability to minimize motion-induced artifacts, the system ensures accurate blood pressure (BP) monitoring without electrical disconnection, even during wrist deformations. This breakthrough not only marks a significant step toward the practical application of MXene in omnidirectional stretchable MXetronics, but also paves the way for reliable, high-performance electronics based on two-dimensional materials for next-generation healthcare monitoring systems that seamlessly integrate with the human body under real-world conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Jing Li,Maoping Lyu,Junjie Wen,Henghui Deng,Ying Luo,Zehong Chen,Chaoqun Zhang
The development of bio-based epoxy resins with high glass transition temperature ( T g ) and low dielectric constant ( D k ) is critical for replacing petroleum-derived electrical materials and addressing energy sustainability challenges. Herein, a molecularly tailored hexafunctional active ester curing agent (AE6) containing rigid imide and bulky fluorine groups is designed to cure epoxidized plant oils with various epoxy functionality. This molecular architecture endows the curing system with enhanced crosslinking capability and intrinsic low polarity, which are essential for achieving high performance. The systematic investigation of curing kinetics and structure-property relationship reveals that plant oil epoxy functionality governs cross-linked density, enabling precise control over thermo-mechanical and dielectric performance. With an increase of epoxy functionality, the resulting resin achieves superior tensile strength of 42.73 MPa, T g of 99.82 °C, and char yield of 24.67% at 600 °C, attributed to the cooperation of aromatic imide and highly cross-linked network. Additionally, the introduction of bulky fluorine group, imide structure, and abundant non-polar alkyl chains significantly reduces the polarity of the network, yielding an ultralow D k of 2.25. This work establishes a molecular engineering strategy to tailor bio-based epoxy resins for potential applications in electrical materials.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Haiyan Yang,Wenbo Han,Chun Shi,Dongtian Miao,Dawei Wang,Zhengjun Shi,Jing Yang,Jingjie Shen
Conventional conductive hydrogels face persistent sustainability challenges including energy-intensive fabrication processes, poor subzero temperature tolerance, and rapid dehydration under ambient conditions, contributing to electronic waste accumulation. To address these limitations, we developed an eco-friendly CaTPD hydrogel through rapid room-temperature polymerization initiated by a tannic acid-Ca 2+ complex, eliminating external energy requirements. The synthesis incorporates renewable biomass resources - dialdehyde cellulose derived from sustainable cellulose sources and plant-derived tannic acid - aligning with green chemistry principles. Structural characterization confirmed the formation of a porous network with coordinated complexes, yielding exceptional mechanical properties including 153 kPa tensile strength, 1423.1% fracture elongation, and 988.9 kJ/m 3 toughness. The incorporated calcium chloride imparted remarkable environmental stability, maintaining complete flexibility at −80 °C and preserving 81.5% of initial mass after 15 days at ambient conditions. The hydrogel demonstrated repeatable adhesion to diverse substrates (up to 32.3 kPa to wood) through multiple interfacial interactions. As a strain sensor, it achieved broad detection range (0–400% strain) with tunable sensitivity (gauge factor 1.63–16.87) and maintained signal stability over 3000 cycles. Practical applications were demonstrated through reliable monitoring of human motions ranging from large-scale joint movements to subtle swallowing actions. This work establishes a sustainable paradigm for flexible electronics by integrating biomass-derived materials with energy-efficient manufacturing, offering a viable solution to reduce energy consumption and electronic waste in sensor production while maintaining high performance under extreme conditions, ultimately contributing to cleaner production in the electronics industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2026
·
IF 6.5
Zhixian Bao,Huibin Liu,Yizhou Zhang,Zhiheng Wang,Hao Li,Haoquan Hu
Ammonia decomposition is considered an ideal carbon-free pathway to hydrogen production. However, the limited catalytic activity of non-noble metal catalysts for ammonia decomposition remains a major barrier to their industrial deployment. Here, we developed a modulation strategy that simultaneously tunes the structural and electronic properties of Ni-based catalysts to improve their catalytic performance. Yttrium (Y) was introduced as a dopant via a citrate sol–gel auto-combustion method into Ni/CeO 2 , enabling compositionally controlled Y incorporation over the electron–defect landscape. This method yields a well-defined Ni 1 Ce 1-x Y x O α structure, in which Y 3+ , with its different ionic radius from Ce 4+ , is homogeneously incorporated into the CeO 2 lattice to form a solid solution, generating abundant and stable surface oxygen vacancies and modulating the electronic environment of Ni active sites. Among the Ni 1 Ce 1-x Y x O α catalysts prepared, Ni 1 Ce 0.5 Y 0.5 O α exhibits the highest activity, achieving 84% NH 3 conversion at 550 °C (GHSV = 30000 mL·g cat -1 ·h −1 ) and a H 2 production rate of 1687 ± 14 mmol·g cat -1 ·h −1 , along with robust thermal stability. The calculated results suggest that Y doping decreases the formation energy of oxygen vacancies and perturbs the local electronic environment, which enhances electron transfer to the Ni active sites, increasing Ni valence electron density. N associative desorption as the rate-determining step (RDS) was determined at Ni 1 Ce 0.5 Y 0.5 O α , in which the electronic modulation, in synergy with surface oxygen vacancies, reduces the energy barrier for N association by 0.21 eV and renders this step thermodynamically favorable. This work demonstrates that the strategic use of Y as a dual-functional promoter enhances the catalytic activity in ammonia decomposition.
✓ 已验证
产品关联
DOI
高影响因子
LUMINESCENCE
·
2026
·Vol. 41
·期 1
·e70421
·
IF 3
Weijun Gui,Suhang Wu,Yanghui Liu,Lu Gan,Xianmin Zhang,Miroslav Almáši,Xiaohang Zhang
To date, most luminescence studies on MOF-76 have focused on tetragonal Tb 3+ -doped and Tb 3+ /Eu 3+ co-doped systems. In this work, MOF-76(Gd, Dy) and MOF-76(Gd, Tb, Dy, Eu) were synthesised for the first time and subsequently subjected to hydrothermal annealing in the presence of polyvinylpyrrolidone (PVP) as a dispersant. Annealing induced a tetragonal → monoclinic phase transition in MOF-76 and transformed the morphology from rods into highly crystalline, transparent nanosheets. As a result, the emission intensity of annealed MOF-76(Gd 0.98 , Dy 0.02 ) increased by approximately 25-fold and its photoluminescence quantum yield (PLQY) improved from 2.33% to 18.60%. These enhancements enabled the combination of hydrothermal annealing with a lanthanide co-doping strategy to achieve precisely tunable, highly luminescent colours in the multi-doped MOF-76(Gd, Tb, Dy, Eu) system. In the annealed materials ( a MOFs), efficient Tb 3+ → Dy 3+ and Dy 3+ → Eu 3+ energy transfer pathways were identified. Owing to their high luminescence and colour tunability, the resulting materials demonstrated practical applicability in colour-tunable fluorescent anti-counterfeiting and, when combined with N-CDs@starch, in white-light-emitting LED devices.
✓ 已验证
产品关联
DOI
高影响因子
SURFACE AND INTERFACE ANALYSIS
·
2026
·
IF 1.8
Zhihui Feng,Zhenzhen Wang,Chunming Ouyang,Shusen Peng,Yongcun Ma
To mitigate the environmental impact of traditional chromate conversion coatings, this study presents a novel dry-in-place conversion coating (DCC) process that operates at room temperature without water rinsing. The coating was formed on AA3003 aluminum substrates by direct application of a conversion solution containing Cr(H₂PO₄) 3 and fluorometallates as main film-forming agents. The chelator 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) was added to improve both solution stability and coating corrosion resistance. The performance of the coatings was systematically evaluated through electrochemical measurements, copper sulfate spot testing, and neutral salt spray testing (NSS). At the same time, adhesion was assessed under both dry and wet conditions. Coating morphology and elemental distribution were analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Chemical states within the coating were further examined by X-ray photoelectron spectroscopy (XPS). Results showed that a HEDP concentration of 0.6 g·L −1 yielded optimal corrosion resistance, with no visible corrosion products after 720 h of NSS exposure. The coating also maintained strong paint adhesion in both dry and wet states. EDS and XPS analyses confirmed that the coating consisted mainly of C, O, F, P, Zr, Ti, and Cr, with chromium present exclusively in the trivalent state (Cr 3+ ) and no hexavalent chromium detected, meeting environmental regulations.
✓ 已验证
产品关联
DOI
高影响因子
BIOMEDICAL CHROMATOGRAPHY
·
2026
·Vol. 40
·期 3
·e70366
·
IF 1.7
Zhiyuan Li,Qing Shao,Hongqun Qiao
A sensitive and robust HPLC-MS/MS method was developed and validated for the simultaneous determination of YWS22026 and its major metabolite M3 in rat plasma using protein precipitation. Chromatographic separation was achieved on a Shim-pack Scepter C18 column (4.6 × 50 mm, 3 μm) with a gradient elution program (mobile phase A: 0.2% formic acid in water; mobile phase B: methanol) at a flow rate of 0.9 mL/min. Detection was performed via positive electrospray ionization (ESI+) in multiple reaction monitoring (MRM) mode. The method demonstrated excellent specificity, accuracy (relative error, %RE < 9.1%), precision (relative standard deviation, %RSD < 9.9%), and linearity (5–2000 ng/mL for both analytes). The lower limit of quantification (LLOQ) was 5 ng/mL. Stability studies confirmed that plasma samples remained stable under various storage conditions (at room temperature for 10 h, −20°C for 22 days, three freeze–thaw cycles, and 4°C autosampler storage for 73 h). This validated method was successfully applied to a 26-week concomitant toxicokinetic study in Sprague–Dawley rats, which revealed significant sex-related differences in exposure for both YWS22026 and M3. These findings provide valuable insights for informing the safety assessment of YWS22026 in subsequent clinical trials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROANALYSIS
·
2026
·Vol. 38
·期 1
·e70099
·
IF 2.3
Yang Chen,Xuening Wang,Huimin Si,Zhiping Sun,Qianyun Yu,Xihong Song,Ying Liu,Chuanbo Yan,Kai Yu
The increasing heavy metal pollution in marine environments has highlighted the urgent need for rapid, on-site detection methods. In this study, a reduced graphene oxide (rGO) and carboxylated multiwalled carbon nanotube (MWCNTs-COOH)-modified screen-printed electrode (SPE) was coupled with a portable electrochemical workstation for on-site detection of Pb 2+ and Cd 2+ in seawater. The key influencing factors involved in the detection process, such as deposition potential, deposition time, and pH value, have been systematically optimized. The response surface methodology (RSM) was applied to refine the portable electrochemical workstation parameters, including step potential, frequency, and pulse amplitude. The detection capability for heavy metals was significantly enhanced by using square wave stripping voltammetry (SWASV) with in situ Hg-Bi film plating, achieving detection limits of 0.4 μg/L for Pb 2+ and 0.8 μg/L for Cd 2+ . Finally, the portable workstation together with rGO/MWCNTs-COOH/SPE showed recovery rates of 101.33 ± 3.42% ~ 115.85 ± 3.50% for Pb 2+ and 101.32 ± 2.23% ~ 102.00 ± 2.00% for Cd 2+ in real seawater. The results were in good agreement with those obtained by inductively coupled plasma mass spectrometry (ICP-MS), thereby validating the detection accuracy of this platform.
✓ 已验证
产品关联
DOI
高影响因子