APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Xi-xi Sun,Ruichen Li,Zhiwei Yang,Nan Zhang,Chao Wu,Junhua Li,Yulin Chen,Qiang Chen,Jing Zhang,Hongjian Yan,Xiang Lv,Jiagang Wu
The strategy of modulating polarization rotation of potassium sodium-niobate ((K 0.5 Na 0.5 )NbO 3 , KNN) lead-free piezoelectric materials was reported to boost piezoelectric properties and resultant piezocatalytic activities. The effectiveness of modulating polarization rotation was proved by degrading Rhodamine B (RhB) using three KNN-based samples with different phase structures (i.e., orthorhombic (O) phase, orthorhombic-tetragonal (O-T) coexistence phase, and rhombohedral-orthorhombic-tetragonal (R-O-T) coexistence phase). Poled samples with the R-O-T coexistence phase show a reaction rate constant of 0.091 min −1 owing to the easiest polarization rotation, 2.12 times more than that of poled O-phase featured samples with the most difficult polarization rotation. Enhanced piezocatalytic activities primarily originate from the easier polarization rotation and improved carrier concentration, accompanied by the trace of the mechano-charge generation. Therefore, modulating polarization rotation effectively boosts piezocatalysis of KNN-based materials, promising for harnessing natural energy and disease treatment.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ENERGY INSTITUTE
·
2025
·
IF 6.2
Wang Lu,Mingwei Xia,Ziyue Tang,Yingquan Chen,Xianhua Wang,Haiping Yang,Hanping Chen
Poly-generation of porous char and H 2 -rich syngas is a key technology for the full and high-value use of carbon and hydrogen elements in biomass. In this study, the synergistic evolution and regulation mechanisms of H 2 and porous carbon during K-assisted bamboo gasification were investigated using fixed-bed pyrolysis-gasification system. The results show that, due to steam activation, both the H 2 production rate and the physicochemical properties of char initially increase and then decline with prolonged gasification time, reaching their peak in the middle stage of the process. The hydrogen conversion rate further indicates that partial gasification achieves higher production efficiency, which is favorable for the poly-generation. K accelerates the evolution of both char and H 2 , enhancing their quality and ultimately enabling the poly-generation of 31.5 mmol/g H 2 and porous carbon with a S BET of 1917 m 2 /g. Moreover, K promotes oxygen enrichment in char, particularly the incorporation of O=C-OR and C=O groups on the char surface, thereby improving the functional applicability of the carbon.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2025
·Vol. 32
·期 6
·1-11
·
IF 2.8
Han Yu,Wei Chaoquan,Wang Ting,Zeng En
The inevitable damage to paint films during coating applications significantly reduces their protective performance, leaving the underlying substrate vulnerable. Developing self-healing coatings is therefore of critical importance. This study presents the synthesis of polyvinyl alcohol (PVA)/polyurea hybrid microcapsules (MCs) loaded with isophorone diisocyanate via interfacial polymerization in an oil-in-water emulsion, with PVA serving as the emulsifier. These microcapsules were incorporated into acrylic resin, along with a dispersant, co-solvent, and isocyanate curing agent, to formulate a microencapsulated self-healing two-component waterborne polyurethane (2 K WPU) coating. The microcapsules were characterized using TG, FTIR, and SEM. The influence of PVA's polymerization degree and alcoholysis degree on microcapsule properties was systematically analyzed. Results indicate that PVA 1799 as an emulsifier yields microcapsules with minimal surface folds and smooth morphology. When 9 wt% of MC 1799 was added to the 2 K WPU coating, the resulting formulation exhibited optimal performance, achieving an average particle size of 29 μm, along with superior self-healing and anti-corrosion properties. This research offers a novel approach for developing high-performance self-healing coatings with potential industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLUTION CHEMISTRY
·
2025
·
IF 1.3
Wang Chengfei,Zheng Guangbing,Jiang Shouxiang,Sun Xiangyu,Huang Xin,Xie Wenjun,Li Haoran,Jiang Xia,Wang Guan,Zheng Gengxiu
The solubility of 3,4,5-Trimethoxyphenylacetonitrile (TMB) was measured by employing a static gravimetric method in twelve pure solvents (methanol, ethanol, n -propanol, iso -propanol, n -butanol, 2-butanol, n -hexane, cyclohexane, n -heptane, ethyl acetate, iso -propyl acetate, N,N’ -dimethyl formamide (DMF)) with the temperature ranging from 283.15 to 323.15 K under the atmospheric pressure. The experimental results demonstrated that the mole fraction solubility of TMB increased with the increasing temperature in all systems, and the solubility of TMB is the highest in DMF and lowest in n-heptane. The experimental solubility of TMB was fitted using the modified Apelblat, Wilson, Yaws, and λh models. And the experimental data were agreed well with these models. Furthermore, the results show that the best fitting model was the modified Apelblat model with an average relative deviation of less than 1%. The intermolecular forces between solute and solvent were evaluated by the cohesive energy density obtained by molecular dynamics simulation, and the solubility and compatibility of solute and solvent were predicted. The analysis of Hansen solubility parameters was performed to investigate the similarities between solvents and TMB, thereby improving our understanding of their dissolution behaviors. The thermodynamic properties of the dissolution process are also calculated using the Wilson model. The results show that the dissolution of TMB is an endothermic process driven by enthalpy.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2025
·
IF 12.1
Zhengyang Li,Yuting Chen,Zhiyuan Guo,Tong Wang,Qi Fan,Yuhang Zhuang,Chenying Li,Mei Yang,Teng Xu,Yanchen Liu,Zhiyuan Li,Qin Sun,Xiaohui Zhu,Hui Xia
Manganese-based oxide cathodes for sodium-ion batteries face irreversible degradation from Mn 3+ Jahn–Teller distortion and Mn 2+ dissolution, compounded by cyclic strain during (de)sodiation. To address this, a P2-K 0.7 Mn 0.8 Ni 0.1 Ti 0.1 O 2 (KMNT) cathode via dual-regulation is developed: K + pillars expand alkali - metal layers enabling fast Na⁺ diffusion, while Ni/Ti co-doping compresses transition-metal layers to suppress Mn migration and Jahn–Teller effect. Besides, the K + pillars in discharged KMNT enhance Mn─O interactions via electrostatic effects, elevating Mn redox potentials and enabling a high average discharge voltage of ≈2.6 V (vs. Na + /Na). Even at a low potential cut-off of 1.5 V, the KMNT cathode demonstrates a reversible specific capacity of 124 mAh g −1 at 1 C with 98% capacity retention after 200 cycles and retains 83% after 900 cycles at a large current density of 10 C, significantly outperforming conventional Mn-based cathodes. Electrochemical and operando tests confirm the dynamic K + /Na + exchange mechanism and absence of Mn 2+ formation, establishing a new paradigm for stable Mn-rich cathodes.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL BIOCHEMISTRY
·
2014
·
IF 2.305
Xian Fang,Lijuan Bai,Xiaowei Han,Jiao Wang,Anqi Shi,Yuzhong Zhang
In this study, an ultra-sensitive hairpin DNA-based electrochemical DNA biosensor for K-ras gene detection is described. Gold nanoparticles (Au-NPs) and horseradish peroxidase (HRP)–streptavidin capped Au-NPs (HAS) conjugates are used for signal amplification. Initially, hairpin DNA dually labeled with thiol at its 5′ end and with biotin at its 3′ end is immobilized on the surface of Au-NPs modified electrode , and the hairpin DNA is in a “closed” state; hence, the HAS conjugates are shielded from being approached by the biotin due to steric hindrance . However, in the presence of target DNA, the target DNA hybridizes with the loop structure of hairpin DNA and causes conformational change, resulting in biotin forced away from the electrode surface, thereby becoming accessible for the HAS conjugates. Thus, the HAS conjugates are linked to the electrode surface via the specific interaction between biotin and streptavidin . Electrochemical detection was performed in phosphate-buffered saline (PBS) containing tetramethylbenzidine (TMB) and H 2 O 2 . Under optimal conditions, the peak current differences (Δ I ) are linear with the target DNA in the range from 0.1 fM to 1 nM with a detection limit of 0.035 fM. Furthermore, this biosensor also demonstrates its excellent specificity for single-base mismatched DNA.
✓ 已验证
DOI
PubMed
高影响因子
TECHNOLOGY IN CANCER RESEARCH & TREATMENT
·
2021
·
IF 3.399
Yayan Yang,Qian Feng,Chuanfeng Ding,Wei Kang,Xiufeng Xiao,Yongsheng Yu,Qian Zhou
Although Epirubicin (EPI) is a commonly used anthracycline for the treatment of breast cancer in clinic, the serious side effects limit its long-term administration including myelosuppression and cardiomyopathy. Nanomedicines have been widely utilized as drug delivery vehicles to achieve precise targeting of breast cancer cells. Herein, we prepared a DSPE-PEG nanocarrier conjugated a peptide, which targeted the breast cancer overexpression protein Na+/K+ ATPase α1 (NKA-α1). The nanocarrier encapsulated the EPI and grafted with the NKA-α1 targeting peptide through the click reaction between maleimide and thiol groups. The EPI was slowly released from the nanocarrier after entering the breast cancer cells with the guidance of the targeting NKA-α1 peptide. The precise and controllable delivery and release of the EPI into the breast cancer cells dramatically inhibited the cells proliferation and migration in vitro and suppressed the tumor volume in vivo. These results demonstrate significant prospects for this nanocarrier as a promising platform for numerous chemotherapy drugs.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
·
2020
·Vol. 53
·期 5
·183-189
·
IF 0.651
Chao Ye,Yun-Yun Gao,Shi-Hua Sang,Pei-Huan Jiang,Qi Ge
The phase equilibria of the KBr–SrBr2–H2O and NaBr–SrBr2–H2O ternary systems at 308 K were measured using the isothermal dissolution equilibrium method. The compositions of the liquid and solid phases were expressed as the mass fraction, and the phase diagrams constructed from the experimental data show that both ternary systems are simple co-saturated types with only one invariant point, two univariant curves, and two crystallization regions. Neither of the two ternary systems forms a double-salt or solid solution. The solid-phase crystallization regions of the KBr–SrBr2–H2O ternary system correspond to KBr and SrBr2·6H2O, and the invariant point of the NaBr–SrBr2–H2O ternary system is saturated with NaBr·2H2O and SrBr2·6H2O. From the phase diagrams, the salting-out effect of SrBr2 on KBr is clear, which indicates that the solubility of KBr is lower and it is easier to separate KBr from solution in the ternary KBr–SrBr2–H2O system at 308 K.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2011
·
IF 3.068
Wenhui Xiong,Jian Peng,Yongfeng Hu
This paper presents a novel technique integrating bulk-sensitive and surface-sensitive XANES methods to distinguish between physisorption and chemisorption for phosphate adsorption onto ferrihydrite-modified diatomite (FHMD). XANES P K-edge, L-edge, and Fe M-edge spectra were obtained for reference samples (K 2 HPO 4 and FePO 4 ·2H 2 O) and test samples (phosphate adsorbed onto FHMD (FHMD-Ps) and Si-containing ferrihydrite (FHYD-Ps)). A resolvable pre-edge peak in the P K-edge spectra of FHMD-Ps and FHYD-Ps provided direct evidence for the formation of P–O–Fe(III) coordination and the occurrence of chemisorption. The resemblance between the P L-edge spectra of K 2 HPO 4 and FHMD-Ps and the marked difference between the spectra of FHMD-Ps and FePO 4 ·2H 2 O indicated the intact existence of the adsorbate and the adsorbent. The similarity between Fe M-edge spectra of FHMD and FHMD-Ps and the difference between the spectra of FHMD-Ps and FePO 4 ·2H 2 O confirmed the findings from P L-edge analyses. Therefore, chemisorption and physisorption coexisted during phosphate adsorption onto FHMD. Phosphate chemisorption occurred in the deeper zone of FHMD (from 50 nm to 5 μm); whereas physisorption occurred in the zone of FHMD shallower than 50 nm since the probing depth of XANES P K-edge method is 5 μm and that of P L-edge and Fe M-edge methods is 50 nm.
研究领域:
环境化学
·
材料科学
·
表面科学
·
吸附
·
光谱学
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Xianglong Huang,Qiuju Xu,Wei Gao,Tingting Yang,Renming Zhan,Jianhua Deng,Bingshu Guo,Mengli Tao,Hongdong Liu,Maowen Xu
In this work, porous carbon matrix derived from metal-organic frameworks is synthesized by a facile carbonation process for confining element selenium. The Se/nitrogen-doped porous carbon composite is applied as the cathode for rechargeable K-Se batteries for the first time. The abundant and hierarchical porous structure is advantageous in overcoming the volume expansion problem caused by polyselenides during discharge-charge process. The in-situ nitrogen-doped porous carbon enhances electronic conductivity of the cathode composite material. The electrochemical result shows that the as-obtained Se/nitrogen-doped porous carbon composite with Se content of 53% delivers good rate capacity with coulombic efficiency of nearly ∼90% and a reversible cycling capacity of 327 mA h g −1 at 0.2 C, maintaining about 130 mA h g −1 even after 100 cycles.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
PubMed
高影响因子
MATERIALS LETTERS
·
2016
·
IF 2.437
Hongfeng Tang,Guang-Xin Chen,Qifang Li
Polymer composites with a high dielectric constant (high-k) and low dielectric loss represent an important research topic for the rapid development of electronic industries. This paper reports on a type of high-k composite with low dielectric loss (dielectric constant is approximately 152, and dielectric loss is only 0.06 at 10 kHz) through a compounded epoxy resin with homemade core-shell-structured carbon nanotube (CNT) hybrids. The composite is prepared by in situ controlled free-radical copolymerization of divinylbenzene and glycidyl methacrylate on the surface of CNTs. The reactive shell contained epoxy groups that play a dual role in keeping the low dielectric loss of the composites and high dispersibility of the coated CNTs. The coated CNTs with proper thickness (about 30 nm) and epoxy value (0.011 mol/g) were selected to prepare the composites.
研究领域:
材料科学
·
电子工程
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2020
·
IF 6.289
Wen-Dong Li,Chao Wang,Zhi-Hui Jiang,Lun-Jiang Chen,Yan-Hui Wei,Li-Yuan Zhang,Ming-Yu Chen,Xiong Yang,Guan-Jun Zhang
Stereolithography (SL) is a promising 3D printing method for the fabrication of high dielectric constant polymer matrix composites (high- k PMCs) because of its high geometric accuracy and few manufacturing defects. However, the presence of ceramic filler destroys the fluidity and transparency of high- k PMCs, reducing their 3D printability. In this study, we fabricated barium titanate microspheres (BT-S) to facilitate the SL-based 3D printing of high- k PMCs using radio-frequency thermal plasma spheroidization (RF-TPS) technology. Experimental results showed that the prepared BT-S particles have spherical shape, smooth surface, large particle size, improved mechanical strength and higher purity, which lead to the enhancement in the 3D printability of UV curable high- k composites: i) the employment of BT-S significantly reduces the apparent viscosity and yield stress; and ii) the UV curing depth increased by 542% maximum. As a result, high- k composites were successfully printed using digital light processing (DLP) technique under low UV light energy. Moreover, the increase of dielectric constant was experimentally verified, which is explained by electrostatic energy increment according to finite element method (FEM) simulations. This study provided an effective approach (i.e. RF-TPS technology) to enhance the 3D printability of high- k PMCs, and also promoted the usage of SL-based 3D printing in advanced electrical and electronic components
研究领域:
材料科学
·
电气工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）