文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,438+ SCI 论文 与阿拉丁产品引用相关
2,295,919.25 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第505至516个,产品总数524个

设置提升方向
CL
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

In-situ dynamic catalysis electrode electrolyte interphase enabling Mg2+ insertion in 2D metal–organic polymer for high-capacity and long-lifespan magnesium batteries

Yujie Zhang,Xin He,Haomiao Li,Wenjie Zhao,Kangli Wang,Kai Jiang

Rechargeable magnesium battery is regarded as the promising candidate for the next generation of high-specific-energy storage systems. Nevertheless, issues related to severe Mg-Cl dissociation at the electrolyte–electrode interface impede the insertion of Mg 2+ into most materials, leading to severe polarization and low utilization of Mg-storage electrodes. In this study, a metal–organic polymer (MOP) Ni-TABQ (Ni-coordinated tetramino-benzoquinone) with superior surface catalytic activity is proposed to achieve the high-capacity Mg-MOP battery . The layered Ni-TABQ cathode, featuring a unique 2D π-d linear conjugated structure, effectively reduces the dissociation energy of Mg x Cl y clusters at the Janus interface, thereby facilitating Mg 2+ insertion. Due to the high utilization of active sites, Ni-TABQ achieves high capacities of 410 mAh/g at 200 mA g −1 , attributable to a four-electron redox process involving two redox centers, benzoid carbonyls, and imines . This research highlights the importance of surface electrochemical processes in rechargeable magnesium batteries and paves the way for future development in multivalent metal-ion batteries.

研究领域: 材料科学 · 电化学 · 能源存储
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2023 · IF 5.2

One-pot solvothermal preparation of triple-emission N, Cl doped carbon quantum dots from waste traditional Chinese medicines as a fluorescent sensor for sensing water and Cr (Ⅵ)

Shujuan Zhang,Yanpeng Mao,Jian Sun,Tinglu Song,Zhanlong Song,Xiqiang Zhao,Wenlong Wang

In this research, N, Cl doped carbon quantum dots (CQDs) with triple-fluorescence centers was prepared by one-pot solvothermal method from waste traditional Chinese medicines as the raw material. The obtained N, Cl doped CQDs showed purple, yellow and red fluorescence under the 326, 380 and 578 nm excitation, respectively, of which red fluorescence was induced by the increase of concentrations and sensed rapidly water contents in 30–100% range with a limited of detection (LOD) of 0.65%. The obtained CQDs was applied for sensing Cr (Ⅵ) by triple channels, which exhibited the high selectivity and sensitivity for Cr (Ⅵ) with the LOD of 0.28, 0.87 and 0.90 μM, respectively. And its derivative materials exhibited the good linear range with 10–100 μM and 5–250 μM taking purple fluorescence as the response signal, respectively. The recoveries of N, Cl doped CQDs in tap water and sludge were in 93–110% range, suggesting a feasible avenue for accurate and rapid sensing of Cr (Ⅵ).

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2024 · IF 5.8

The interference mechanism of Na+ and Cl- on photocatalytic properties of phosphate-oxygen co-doped graphite carbon nitride for hydrogen production from water splitting: Experimental and theoretical calculations

Longde Jiang,Jingde Luan,Yu Zhang,Qingyu Chi,Wengang Liu,Zheng Yan,Shaobai Li,Chen Zhao

Phosphorus-oxygen co-doped graphite carbon nitride (POx-CN) are successfully fabricated by in situ impregnation and two-stage thermal polycondensation to investigate the effect of Na + and Cl - on the photocatalytic hydrogen evolution from artificial seawater splitting. The as-prepared POx-CN exhibits a hydrogen evolution rate of 1054.29 μmolg −1 h −1 in artificial seawater , lower than fresh water , indicating that Na + and Cl - play an inhibitory effect on hydrogen evolution reaction . The theoretical calculation indicates that the phosphorus-oxygen binary doping changed the electrostatic potential of the modified layer in carbon nitride molecule, accelerating the electron transfer rate from the structural O in triazine ring to P-N bond. In artificial seawater, the competition between Na + and Pt 2+ at active sites in the modified layer and electron capture by Cl - in the mutual conversion of Cl - and chlorine radicals result in the reduction of hydrogen evolution efficiency.

CAS / MDL: 108-78-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2024 · IF 4.3

AX·(H2SeO3)n (A = K, Cs; X = Cl, Br; n = 1, 2): A Series of Ionic Cocrystals as Promising UV Birefringent Materials with Large Birefringence and Wide Band Gap

Mengmeng Zhu,Junbo Wang,Lei Hou,Yiwen Yuan,Lili Liu,Yaoqing Chu,Chunmei Huang

The design and syntheses of new birefringent crystals will be of great importance in commercial applications and materials science. A series of ultraviolet (UV) birefringent crystals, AX·(H2SeO3)n (A = K, Cs; X = Cl, Br; n = 1, 2), with large sizes up to 23 × 6 × 3 mm3, was successfully synthesized by simple aqueous solution method. These four compounds belong to three different space groups. Isomorphic KCl·(H2SeO3)2 and CsCl·(H2SeO3)2 crystallize in the P1¯ space group, while CsBr·(H2SeO3)2 and CsCl·H2SeO3 crystallize in the P21/m and P21/c space groups, respectively. They exhibit cocrystal structures composed of [2(H2SeO3)]∞ and [AX]∞ frameworks, ingeniously inheriting the large optical anisotropy of selenite and the wide band gap of alkali metal halide. And it proves that these compounds indeed possess large birefringence (0.1–0.17 at 532 nm) and short UV cutoff edges (227–239 nm), achieving a balance of optical properties. This research affords a simple and viable strategy for the design and syntheses of new UV birefringent crystals. Besides, it is also found that the n value and ionic size (A and X ions) have important influences on the crystal structures and optical properties of AX·(H2SeO3)n. And this will promote further understanding of the alkali metal halide selenite family.

研究领域: 材料科学 · 晶体工程 · 光学材料 · 无机化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMISTRY OF MATERIALS · 2024 · IF 7.2

Mixed Anionic M(S/X)6 Polyhedra as Symmetry-Breaking Motifs to Enhance the Infrared Nonlinear Optical Response in Y–M–S–X (M = Ga, Ge; X = Cl, Br)

Yan Guo,Bin-Wen Liu,Chao-Hong Xie,Wen-Fa Chen,Ming-Xin Li,Xiao-Ming Jiang,Guo-Cong Guo

Rare-earth infrared nonlinear optical (IR NLO) compounds have garnered significant attention due to their abundant electronic structures. However, their NLO efficiency has been relatively modest, attributed to the localization of valence electron shells in rare-earth metals. Traditional design strategies for IR NLO materials have predominantly focused on MQ4 (M = metal, Q = S or Se) tetrahedra, with limited exploration of MQ6 octahedra. We introduce a novel approach to enhance NLO effects by incorporating distorted mixed anionic octahedral M(S/X)6 groups. To illustrate this strategy, we undertake structure modification and optimization of IR NLO performance using the Y–Ga–Ge–S system as an example. The synthesis of a new rare-earth chalcogenide, Y6Ga2GeS14 (1), serves as a foundation. Further halogen atom substitution yields Y6Ga4.2S13.6Cl3.4 (2), Y6Ga2.83Ge2S16.75Cl (3), and Y6Ga2.83Ge2S16.5Br1.5 (4). All compounds demonstrate remarkable NLO performance, including moderate NLO coefficients (0.17–0.70 × AgGaS2), large laser-induced damage thresholds (LIDTs) (3.78–6.19 × AgGaS2), and a broader transmission range (0.5–14.9 μm). The incremental enhancement of NLO efficiency in compounds 1–4 can be attributed to symmetry breaking induced by halogen atom substitution and increased distortion of the octahedral M(S/X)6 motifs in their structures, validating the effectiveness of our strategy. Notably, this strategy concurrently increases the band gap and LIDT, overcoming the NLO–LIDT incompatibility, being strikingly different from other reported approaches. This work provides new insights into optimizing the NLO performance of rare-earth IR NLO compounds through the modulation of octahedral motifs.

研究领域: 材料科学 · 光学 · 化学 · 物理学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2023 · IF 9.5

Engineering CsPbX3 (X = Cl, Br, I) Quantum Dot-Embedded Borosilicate Glass through Self-Crystallization Facilitated by NaF as a Phosphor for Full-Color Illumination and Laser-Driven Projection Displays

Junhao Li,Dacheng Zhou,Ying Liu,Yan Chen,Jiayuan Chen,Yong Yang,Yuan Gao,Jianbei Qiu

All inorganic perovskite (CsPbX3, X = Cl, Br, I) quantum dot (QD) glass samples are considered the next generation of lighting materials for their excellent luminescence properties and stability, but crystallization conditions are difficult to control, which often leads to the inhomogeneous crystallinity of QDs. Here, we provided evidence that the presence of sodium fluoride induced self-crystallization of CsPbBr3 QDs during routine glass formation without the need for additional heat treatment. We showed that NaF simultaneously affected the network structure of glass and promoted the formation of CsPbBr3 QDs, that is, Na+ ions entered the glass network skeleton, partially interrupting the network structure, while the strong electronegativity of F– ions attracted Cs+ and Pb2+ ions into the gaps formed in the glass networks that had been loosened up by Na+ ions, which reduced the activation energy of crystallization processes. Our results showed that NaF-induced CsPbBr3 QDs glass had excellent thermal stability, high photoluminescence quantum efficiency (49%), and luminescent stability under high-power laser irradiation. Finally, this work also demonstrated the general applicability of this method in the making of a series of CsPbX3 (X = Cl, Br, I) QD glass samples by NaF-induced self-crystallization, which drastically expanded the color gamut to a range of full spectrum for luminescence and laser-driven projection displays. We believe that the work presented here represents a new direction for the research and development of full-color gamut inorganic perovskite quantum dot glass samples, which could have a significant impact on the future applications of laser-driven projection displays as well.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2023 · IF 13.6

Preparation of magnesium potassium phosphate cement from municipal solid waste incineration fly ash and lead slag co-blended: Ca-induced crystal reconstruction process and Pb-Cl synergistic solidification mechanism

Shiwei Liu,Xing Cao,Weichen Yang,Runjie Liu,Lin Fang,Rui Ma,Juan Peng,Shuaifei Zheng,Fei Ji

Higher chlorine (Cl) content than lead (Pb) content in municipal solid waste incineration fly ash (MSWIFA) impeded the practical application of Pb 5 (PO 4 ) 3 Cl-derived magnesium potassium phosphate cement (MKPC) preparation strategy. Herein, Pb/Ca-rich lead slag (LS) was co-blended with MSWIFA to prepare MKPC for the synergistic treatment of both two solid wastes and the Pb-Cl solidification. The results showed that the resulting 15–15 (15 wt% MSWIFA and 15 wt% LS incorporation) sample achieved 25.44 MPa compressive strength , and Pb and Cl leaching toxicity was reduced by 99.18 % and 92.80 %, respectively. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses showed that Pb 2+ , Ca 2+ , phosphate and Cl - formed Pb x Ca 5−x (PO 4 ) 3 Cl in samples. The formation of Pb x Ca 5−x (PO 4 ) 3 Cl was also demonstrated by the high-angle annular dark field scanning transmission electron microscope (HAADF-STEM), while differences in the lattice characteristics of Pb x Ca 5−x (PO 4 ) 3 Cl and Pb 5 (PO 4 ) 3 Cl were found. In-situ XRD indicated that Ca 2+ accelerated the transformation of Pb 2+ to Pb 5 (PO 4 ) 3 Cl. After co-precipitating with Ca 2+ to form Pb x Ca 5−x (PO 4 ) 3 Cl, Pb 2+ continuously substituted Ca 2+ to eventually transform to Pb 5 (PO 4 ) 3 Cl. This work informs the synergistic treatment of MSWIFA and LS and offers new insights into the reaction mechanism between Pb 2+ , phosphate and Cl - under Ca 2+ induction.

CAS / MDL: 7664-39-3 7697-37-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2021 · IF 4.098

A fluorometric and colorimetric dual-readout nanoprobe based on Cl and N co-doped carbon quantum dots with large stokes shift for sequential detection of morin and zinc ion

Yanxia Xiao,Wenjuan Dong,Huiping Wang,Yumin Hao,Zihan Wang,Shaomin Shuang,Chuan Dong,Xiaojuan Gong

A novel visual nanoprobe was developed for the sequential detection of morin and zinc ion (Zn 2+ ) based on Cl and N co-doped carbon quantum dots (ClNCQDs) via a fluorometric and colorimetric dual-readout mode. The yellow fluorescence ClNCQDs was synthesized by the one-step hydrothermal treatment of o -chlorobenzoic acid and p -phenylenediamine. The most distinctive property of the ClNCQDs is the large stokes shift (177 nm), which is significantly higher than other reported CQDs. The fluorescence of the ClNCQDs can be effectively quenched by morin based on the synergistic effect of IFE, electrostatic interaction, and dynamic quenching process, and recovered upon the addition of Zn 2+ due to strong interaction between morin and Zn 2+ . The nanoprobe exhibited favorable selectivity and sensitivity toward morin and Zn 2+ with detection limits of 0.09 µM and 0.17 µM, respectively. Simultaneously, the color of the ClNCQDs solution was changed (light-pink → faint-yellow → dark-yellow) along with the variation of the fluorescence signal of the ClNCQDs. This proposed nanoprobe was successfully applied for morin and Zn 2+ analyses in actual samples and live cells with high accuracy. The results of this study demonstrate the great application prospects of the ClNCQDs for morin and Zn 2+ detection in complex actual samples and biosystems.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COMBUSTION AND FLAME · 2021 · IF 4.185

Butterfly wing fans the fire: High efficient combustion of CWs/CL-20/AP nanocomposite for light ignited micro thruster using multi-channeled hierarchical porous structure from butterfly wing scales

Tingting Zhou,Xiaodong Li,Chunjiao Liu,Xianrui Shi,Bo Wu,Xiaohui Duan,Guangcheng Yang

To meet the requirement of miniaturization and integration of the micro thrusters based on the chemical fuels, high-energy density compound is an emerging material as the chemical fuel. However, it is still challenging to realize the high-efficiency, stable and self-sustaining microcombustion of the high-energy density chemical fuels. Herein, we report the high-performance microcombustion of CWs/AP/CL-20 composite with nanoscale 2,4,6,8,10,12-(hexanitrohexaaza)cyclododecane (CL-20) and oxidizer ammonium perchlorate (AP) confined in a self-standing carbonized butterfly wing scales (CWs) matrix. CWs with multi-channeled hierarchical porous structure provide a model architecture for loading of AP and CL-20. CL-20 is designed to serve as heat/pressure loss compensate agent due to its high-energy density, fast energy release rate and large amounts of gas release during combustion process. The combustion of CWs/AP/CL-20 is greatly enhanced due to the enhanced heat and mass transfer originating from the multi-channeled hierarchical porous structure and synergistic reactions between components at nanoscales, which is demonstrated as promising solid-propellant for the micro thruster. It is found that the sample with oxygen balance close to zero, which can be conveniently regulated by adjusting the mass ratio of CL-20 and AP, has the best microcombustion performance, resulting in a specific impulse of 383.5 N·s/kg.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING COMMUNICATIONS · 2016 · IF 1.433

Study of the Physicochemical and Excess Properties of Binary Systems Composed of Ionic Liquids ([Cnmim]Cl, n = 6, 8) and Three Dipolar Aprotic Solvents at T = 288.15–333.15 K

Lu Bai,Shu-Ni Li,Quan-Guo Zhai,Yu-Cheng Jiang,Man-Cheng Hu

In the present work, physicochemical properties, such as density (ρ), refractive index (nD) and viscosity (η), for six binary systems containing [Cnmim]Cl (Cnmim = 1-alkyl-3-methylimidazolium; n = 6, 8) and three dipolar aprotic solvents [N-methyl-2-pyrrolidinone, 1,3-dimethyl-2-imidazolidinone and 1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone)] were measured at wide composition ranges and temperatures from T = 288.15 to 333.15 K at atmosphere pressure. Moreover, the derived properties, such as excess molar volumes (), apparent molar volumes (Vφ,i), deviations in refractive index (ΔnD), and isobaric thermal expansivity coefficients (αP), were calculated. The Redlich–Kister polynomial equation was fitted to the excess molar volumes and the deviation in refractive index data. The experimental results in this work allow us to discuss the interactions in the mixtures. The physicochemical properties of such systems may be useful for applications of imidazolium-based ionic liquids in the field of chemical engineering.

CAS / MDL: 872-50-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ORGANIC CHEMISTRY · 2024 · IF 3.3

Au(PPh3)Cl/AgOTf/TsOH-Catalyzed Cascade Reaction between 1-(2-Hydroxyphenyl)-propargyl Alcohols and β-Oxoketones (Amides, Acid): Diastereoselective Construction of cis-3a,8a-Dihydrofuro[2,3-b]benzofuran Framework

Yangyi Zhang,Guisheng Deng

In the Au(PPh3)Cl/AgOTf/TsOH/MeCN/N2/25 °C system, diastereoselective synthesis of cis-3a,8a-dihydrofuro[2,3-b]benzofuran derivatives with a substituent at the 8a-position has been achieved by using 1-(2-hydroxyphenyl)-3-arylprop-2-yn-1-ols and β-oxoketones (amides, acid) as starting materials. The studies revealed that the acidity of methylene in substrates plays a key role in the differential reactions. A stronger acidity of the methylene is favorable in the desired conversion. The unique role of TsOH as an additive acid in the synthesis strategy has been rationalized. 2-Oxo-phosphonate, 2-oxo-sulfonate, and 3-oxobutanoate are suitable for the conversion.

研究领域: 有机化学 · 合成化学
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
PHYSICAL CHEMISTRY CHEMICAL PHYSICS · 2020 ·Vol. 22 ·期 30 ·17299-17305 · IF 3.43

Photoluminescence spectral broadening, chirality transfer and amplification of chiral perovskite materials (R-X-p-mBZA)2PbBr4 (X = H, F, Cl, Br) regulated by van der Waals and halogen atoms interactions

Chenyang Zhou,Ya Chu,Linlin Ma,Yingqian Zhong,Chao Wang,Yalan Liu,Haoyue Zhang,Beibei Wang,Xia Feng,Xi Yu,Xiaotao Zhang,Yan Sun,Xiaozeng Li,Guangjiu Zhao

In this work, we introduced halogen-substituted chiral molecules as A-site cations to synthesize a series of novel organic–inorganic hybrid two-dimensional (2D) chiral perovskite materials (R-X-p-mBZA)2PbBr4 (X = H, F, Cl, Br; p: para-position; mBZA = α-methylbenzylamine) for the first time. This halogen-substituted cation strategy collectively solved problems of narrow emission, weak chirality and low photoluminescence quantum yield (PLQY) for the emerged chiral perovskites. Photoluminescence (PL) spectra are significantly broadened due to the additional emission from self-trapped excitons (STEs) besides free excitons (FEs) states modulated by introducing significant disorder to the Pb–Br–Pb angle. The chirality of A-site chiral molecules is transferred and amplified to entire perovskite materials by fixing the chiral molecules at A-site via the interaction of halogen atoms. Furthermore, their PLQYs are improved with the reduction of energy gap and inhibition of the non-radiative transition from STEs to ground state. The halogen-substituted A-site cation strategy can be performed to develop organic–inorganic hybrid chiral perovskites with various optoelectronic applications.

CAS / MDL: 68-12-2 10031-22-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。