CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.2
Pin Meng,Peichen Wang,Jiahe Yang,Yunlong Zhang,Hongda Shi,Xingyan Chen,Dingge Fan,Siyan Chen,Xi Lin,Dongdong Wang,Yang Yang,Qianwang Chen
Nickel (Ni)-based catalysts are the most promising platinum (Pt)-free anode hydrogen oxidation reaction (HOR) catalysts in anion exchange membrane fuel cells (AEMFCs). However, the limited reactivity of Ni in alkaline HOR presents a significant barrier to the commercialization of AEMFCs, due to both thermodynamic and kinetic constraints. Here, we employ zinc single atoms (Zn-SAs) modified porous carbon support to create microscopic hydrophilic domains aimed at optimizing electrode kinetics. We found that the doping of Zn-N species could manipulate the electron transfer between Ni and carbon support, which causes a drastically diminished adsorption of hydrogen on Ni, thus boosting the alkaline HOR activity from a thermodynamic perspective. Spectral and electrochemical data reveal that Zn sites facilitate hydroxide transfer at the Ni/Zn 1 -NC interface by improving hydrogen bond network connectivity. These enhancement enables the Ni/Zn 1 -NC AEMFC to deliver a peak power density of 678 mW cm –2 , surpassing even a low loading of commercial Pt/C. This work illustrates the potential for high efficiency in platinum-group metal-free AEMFCs.
✓ 已验证
DOI
高影响因子
MOLECULES
·
2026
·Vol. 31
·期 12
·2039
·
IF 5.1
Xiangyu Wei,Xiumei Song,Wei Huang,Yating He,Yimin Wang,Pinxiu Liu,Lichao Tan,Lin Yang,Zhongwei Chen
The strategy of enhancing biocatalytic activity through the modification of natural cells with nanomaterials has overcome the intrinsic catalytic bottlenecks of bacteria, making significant contributions to energy production and pollution treatment. However, chemically engineered biocatalyst systems remain in their early stages of development. Herein, we report a simple and straightforward strategy for constructing an efficient biocatalyst by incorporating carbon quantum dots (CDs) intoEscherichia coli(E. coli) to enhance the oxygen reduction reaction (ORR) at the cathode of microbial fuel cells (MFCs). The introduction of CDs significantly accelerates extracellular electron transfer and metabolic activity, markedly increases intracellular adenosine triphosphate (ATP) levels, and promotes substrate utilization. Furthermore, the engineeredE. coliexhibits enhanced surface adhesion and increased electronegativity. Electrochemical measurements demonstrate superior ORR activity, delivering a maximum current density of 3.1 mA·cm−2and an onset potential of 0.67 V, outperforming many previously reported biocatalysts. When applied in an MFC system, the modified biocatalyst achieves a maximum power density of 325 μW·cm−2, placing it among the highest-performing systems reported to date. This work provides a facile and cost-effective approach for improving MFC performance and offers a promising design strategy for next-generation biohybrid catalysts.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Cuiyun Yin,Xuanchao Shi,Jing Yu,Zhaoyou Deng,Deying Tang,Yin Yuan,Shifang Liu,Lu Qu,Yihang Li,Xi Chen
Although injectable hydrogels hold promise as dressings for chronic diabetic wounds, their clinical potential is often limited by non-specific actions and modest efficacy. To address these limitations, we developed a novel injectable hydrogel by integrating Bletilla striata polysaccharide (BSP)—known for its biocompatibility and wound-healing properties—with alpha -lipoic acid (LA), a potent antioxidant and antimicrobial agent. The preparation process is straightforward, requiring only the mixing of LA dissolved in Tris buffer (LA-Tris) and BSP solutions, and the gelation time was inversely correlated with BSP content. The resulting BSP/LA hydrogel displayed excellent injectability, appropriate mechanical strength, reliable tissue adhesion, and tunable degradation and swelling behaviors. By leveraging the synergistic effects of BSP and LA, the hydrogel exhibited strong broad-spectrum antimicrobial and antioxidant activities. Both in vitro and in vivo evaluations confirmed its high biocompatibility. Notably, in a diabetic rat wound model, the BSP/LA hydrogel significantly accelerated wound closure, attenuated inflammatory responses, stimulated collagen deposition, and enhanced neovascularization compared to control groups. These collective findings underscore the potential of this multifunctional injectable hydrogel as an effective and clinically viable dressing for the management of complex chronic wounds.
✓ 已验证
DOI
PubMed
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Zongmao Lv,Hai Yu,Jie Liu,Xuejing Zheng,Ying Pei,Keyong Tang
A dual-crosslinked cellulose/alginate fiber with high strength. • Ionic-covalent network via functionalized microfibrillated cellulose. • Aldehyde groups reduce/stabilize silver nanoparticles in situ . • Excellent photothermal performance and antibacterial activity. The escalating crisis of plastic pollution crisis necessitates the urgent advancements in development of sustainable material alternatives. A critical challenge is the fabrication of high-performance biodegradable fibers that can substitute non-degradable synthetic polymers. Natural polymers such as sodium alginate (SA) and cellulose feature excellent biocompatibility and renewability, yet their practical application are severely restricted by inferior inherent mechanical properties. To overcome this drawback, this study proposes a synergistic dual-crosslinking strategy. Specifically, microcrystalline cellulose was modified via a stepwise oxidation treatment to prepare dialdehyde- and carboxyl-functionalized microfibrillated cellulose (DTC). During fiber fabrication, DTC contributes to the construction of a robust ion-covalent crosslinking network: carboxyl groups chelate metal ions to form ionic crosslinks, while the aldehyde groups undergo condensation reaction with hydroxyl groups of sodium alginate to generate covalent bonds. Benefiting from this elaborate strctural design, the resultant composite fiber achieves a tensile strength of 445 MPa, which is 32% higher than that of pure alginate fiber. Furthermore, the incorporated aldehyde groups enabled the in-situ reduction of silver nanoparticles, which imparted exceptional near-infrared photothermal performance and superior antimicrobial activity. Under 250 mW/cm 2 irradiation, the material reaches a photothermal temperature of 75.2 °C, and exhibits high antibacterial inhibition efficiencies of 97.7% against E. coli and 99.3% against S. aureus . This work develops a feasible and versatile strategy for the design and preparation of high-performance alginate-based materials and provides a generalized design principle for the fabrication of multifunctional sustainable composite materials. Download: Download high-res image (91KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Nai-Fu Liu,Xiao-Yan Zhang,Yi-Fan Huang,Hao-Tian Wu,Ze-Fan Yao,Jie-Yu Wang,Jian Pei
Understanding thermal transport in polymer semiconductors is crucial for thermal management in organic electronic and energy-harvesting devices, directly affecting their performance, safety and long-term stability. However, the structure-property relationship and underlying thermal transport physics remain largely unexplored. Herein, thermal conductivities of 11 representative polymer semiconductors were measured using an improved suspended‑3 ω technique, revealing a strong correlation between thermal conductivity and the paracrystalline disorder of lamellar packing. It is observed that the in‑plane intrinsic thermal conductivity of polymer semiconductor films is predominantly controlled by lamellar paracrystallinity, rather than backbone chemistry or π–π stacking. Tuning lamellar paracrystallinity within the same polymer modulated thermal conductivity by up to ∼40%. Our work shows that lamellar packing is the primary interchain thermal transport pathway, with more efficient vibrational coupling than π–π stacking as evidenced by molecular dynamics simulations. This physical picture reveals distinct interchain pathways for charge and thermal transport in polymer semiconductors, providing guidelines for manipulating thermal conductivity without affecting electrical performance in advanced organic materials and devices.
✓ 已验证
DOI
PubMed
高影响因子
Food Packaging and Shelf Life
·
2026
·
IF 10.8
Tian Du,Lin-Kun Sun,Pei-Ru Zhou,Yu-Cang Zhang,Yan-Zhen Zheng
Oysters are highly nutritious but extremely perishable due to rapid microbial growth and biochemical deterioration after shucking, leading to undesirable off-odor and textural degradation during storage. To address this challenge, a series of poly(vinyl alcohol) (PVA)-based composite films incorporating propolis polyphenols extracted using supramolecular deep eutectic solvents (SDES) were developed as multifunctional active packaging materials. Comprehensive characterization confirmed good compatibility between PVA and DES propolis extracts (DPT), as Fourier transform infrared spectroscopy and X-ray diffraction revealed strong hydrogen bonding interactions and reduced crystallinity in the composite films. The incorporation of DPT markedly enhanced functional performance, including outstanding UV-blocking ability (UV transmittance at 280 nm decreased from 68.2% to 4.6%), improved flexibility (elongation at break increased from 178.7% to 471.1%), and enhanced thermal stability (maximum degradation temperature increased from 285 °C to 360 °C). The PVA/DPT50 film also exhibited excellent antioxidant activity (77.4% DPPH radical scavenging) and strong antibacterial effects against E. coli and S. aureus . When applied to oyster preservation at 4 °C, the PVA/DPT40 film effectively inhibited quality deterioration by reducing lipid oxidation, suppressing microbial growth, and maintaining lower pH and TVB-N values after 10 days of storage. These results demonstrate that PVA/DPT composite films provide an efficient and eco-friendly strategy for extending the shelf life of highly perishable seafood products.
✓ 已验证
DOI
高影响因子
Pharmaceutics
·
2026
·Vol. 18
·期 6
·718
·
IF 6.9
Kai-Juan Cao,Long Fu,Yu-Chen Sun,Jian Meng,Qin Huang,De-Cheng Deng,Hai-Tang Hu,Zhi-Hui Han,Gang Guo,Xue Zhou,Xiao-Yan Chen
Background/Objectives: Zastaprazan (JP-1366) is a novel potassium-competitive acid blocker (P-CAB) used for the treatment of gastroesophageal reflux disease (GERD). To date, its metabolic pathways and metabolism-related drug–drug interactions (DDIs) in humans remain incompletely elucidated. This study aimed to determine the relative contributions (fm) of cytochrome P450 isoforms to JP-1366 elimination and assess its DDI potential.Methods/Results: In vitro metabolic studies using human liver microsomes (HLMs) revealed that JP-1366 was first metabolized to M1, which subsequently underwent further oxidation, glucuronidation, andN-dealkylation. Mono-oxidation was estimated to contribute more than 46% to the overall metabolic clearance of JP-1366. Reaction phenotyping identified CYP3A as the major enzyme (fm= 96.1%), followed by CYP1A2 (1.49%) and CYP2C9 (2.41%). By integrating in vitro data, clinical pharmacokinetic data and clarithromycin coadministration DDI data, a physiologically based pharmacokinetic (PBPK) model was developed and validated. Simulations predicted significant DDIs with strong CYP3A inhibitor (ketoconazole), with AUC ratios of 3.80. Moderate inhibitors (fluconazole and fluvoxamine) caused mild increases (AUC ratios: 1.14–1.74). Conversely, strong and moderate CYP3A inducers, rifampicin and efavirenz, produced pronounced DDIs, with AUC ratios of 0.22 and 0.50, respectively. Furthermore, simulations predicted that although JP-1366 functions as a CYP enzyme inhibitor, it would not cause clinically meaningful changes in the plasma exposure of corresponding CYP substrate drugs; however, potential interactions with CYP3A substrates still warranted consideration.Conclusions: JP-1366 is predominantly cleared via a CYP3A-dominated metabolic pathway. The PBPK simulations suggest that JP-1366 may be a moderately sensitive CYP3A substrate and a moderate inhibitor of sensitive CYP3A substrates, while its perpetrator DDI risk toward other major CYP pathways appears limited. These findings support caution or monitoring when JP-1366 is co-administered with strong CYP3A modulators or sensitive CYP3A substrates.
✓ 已验证
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Mingxu Wang,Chenyu Tang,Jinyu Yang,Ziyue Li,Hao Du,Qin Li,Haoran Ji,Xinjie Li,Yan Lu,Fang Fang,Mao Su,Jiafeng Ruan,Fei Wang
Extremely fast charging (XFC) of batteries holds significant importance in the era of intelligent technologies, yet the intricate role of electrolyte properties in determining XFC behavior remains obscure. Furthermore, conventional theories and in situ characterization techniques fails to elucidate electrochemical behaviors under sub-minute-level charging conditions. Herein, we report a data-driven approach for analyzing the effect of each independent physical and solvation property on sub-minute-level sodium-ion storage behavior. Causal graph analysis reveals that the size of the solvation clusters shows the strongest negative correlation with ultrafast Na + storage in graphite. The optimized compact solvation electrolyte demonstrates an astonishing extreme current density of 250 A g −1 (corresponding to a power density of 46.78 kW kg −1 graphite ) and an unprecedented cycle life of 100 000 cycles. Most notably, the graphite||Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 full batteries achieve stable sub-minute-level charging and discharging, exhibiting ultrahigh rate capabilities (up to 200 C, ∼3.4 s per charge) and ultra-stable cycle performance (24 000 cycles at 50 C, ∼29 s per charge). This work provides a promising pathway for the development of XFC battery, pioneering an innovative assessment strategy for next-generation electrolytes.
✓ 已验证
DOI
PubMed
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2026
·
IF 7.9
Rui Tian,Yuzhen Zhao,Jian Xu,Jiayi Gua,Xintong Jiang,Fangmin Wang,Zhiqiang Shan,Xiaohua Jia,Haojie Song
To address the bottlenecks of conventional epoxy (EP) resin coatings, which arise from their reliance on toxic amine-based curing agents and high friction coefficients, this study develops green, self-lubricating EP-based coatings (named RLC@M-EP) based on the multiple active-site crosslinking mechanism of regenerated lignocellulose (RLC) and the lubrication enhancement of MXene. RLC is prepared from poplar powder using a deep eutectic solvent (DES), which provides abundant active hydroxyl groups that fully replace amine curing agents, crosslink with EP, and form a three-dimensional network. A series of RLC@M-EP coatings is fabricated by drop-casting while different mass fractions of MXene are introduced to enhance lubrication via interlayer shear and transfer film formation. The abundant active sites of RLC ensure efficient crosslinking with EP matrix, while MXene nanosheets delaminate and spread during friction to form a stable transfer film. Benefiting from the synergy between MXene's lubrication and the robust RLC-EP network strengthening effects, the RLC@M-EP coating achieves a minimum friction coefficient of 0.15 and significantly reduced wear. This work provides a new strategy for developing high-performance, eco-friendly, bio-based self-lubricating EP coatings by integrating chemical crosslinking with physical lubrication.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Qingyi Xie,Xiaolin Wang,Yuqing Wang,Jiamei Fu,Haiquan Sun,Fenglong Li,Minghui Cui,Junyi Zhou,Jin Zhu,Jing Chen
The incorporation of lignin into waterborne polyurethane (WPU) networks for the preparation of high-performance, multifunctional protective coatings represents a highly attractive yet challenging research direction. This study employed a highly reactive soluble modified lignin (MOLA) as a polyol and incorporated it into the main chain of a WPU polymer network. A series of bio-based waterborne polyurethanes (CLWPU–CO x ) with tailored molecular architecture was synthesized and found to exhibit corrosion resistance, UV blocking, UV-aging resistance, self-cleaning behavior, weather resistance, biodegradability, and non-biotoxicity. The influence of MOLA content on the chemical structure and properties of CLWPU–CO x was systematically investigated, and quantitative structure–property relationships between the MOLA loading ratio and material properties were established. The results indicated that MOLA simultaneously served as both a chemical and physical crosslinking site, thereby regulating the microphase separation of WPU. The resulting uniform internal structure and high crosslinking density endowed CLWPU–CO x with excellent hydrophobicity, water vapor barrier properties, gas barrier properties, and long-term outdoor durability, confirming its considerable potential for marine anti-corrosion protective coating applications. Download: Download high-res image (158KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Jing Feng,Haochen Ni,Gaopeng Wang,Yan-Jie Wang,Yueman Tang,Si Yu Zheng,Jintao Yang
Despite their intrinsic salt responsiveness, the application of zwitterionic hydrogels in smart devices is often limited by weak response contrast and restricted responsive modes. Inspired by cephalopods, we developed a zwitterionic poly(4-vinyl-1-(3-sulfopropyl) pyridinium betaine) (pVPPS) hydrogel that integrates salt-responsive changes in mechanics, fluorescence, volume, and transparency. By incorporating intrinsically fluorescent aromatic pyridine moieties directly into the zwitterionic side groups, the functions of strengthening interchain associations and generating fluorescence are unified within a single structural motif. This integration endows the gel with synchronized multi-property responses upon exposure to salt stimulus. Specifically, in 0.01 m NaCl solution, Cl − ions compete with the polymer for water and promote chain aggregation, yielding an opaque, tough, and strongly fluorescent hydrogel. Conversely, in 1 m NaCl solution, abundant Cl − ions penetrate the interchain spaces and screen interchain electrostatic interactions, resulting in a transparent, swollen, and non-fluorescent hydrogel. These pronounced and reversible multi-property contrasts endow the pVPPS hydrogel with potential for information encryption, soft actuation, and ion sensing.
✓ 已验证
DOI
高影响因子
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY
·
2026
·
IF 6.6
Hongjiang Li,Jiaqi Li,Hongyu Cao,Qian Tang,Lihao Wang,Xuefang Zheng
The widespread occurrence and persistence of fluoroquinolone antibiotics in aquatic environments necessitate a deeper understanding of their photo-transformation. This study, the photodegradation mechanism of levofloxacin was systematically investigated by integrating HPLC-MS, transient absorption spectroscopy, and quantum chemical calculations. The results revealed that the photodegradation of levofloxacin proceeded more rapidly under neutral conditions. Cl - and SO 4 2- promoted photodegradation via reactive species, while the divalent metal ions (e.g., Cu 2+ ) inhibited it by forming photostable complexes. Quantum calculations predicted five pathways, with the piperazine ring cleavage pathway having the lowest energy barrier (5.3 kcal/mol). Experimental analysis further confirmed that the major photoproducts arose from demethylation, decarboxylation, piperazine ring oxidation, and hydroxylation–defluorination reactions, among which the decarboxylation and piperazine ring oxidation processes were consistent with theoretical predictions. Notably, a time-dependent change in optical rotation was observed and a low-energy pathway (9.1 kcal/mol) was identified, indicating the ring containing the chiral atom was disrupted during photolysis. This integrated experimental and theoretical study provided novel mechanistic insights and solutions for targeting the removal of fluoroquinolone antibiotic residues from the environment.
✓ 已验证
DOI
PubMed
高影响因子