ANALYTICA CHIMICA ACTA
·
2019
·
IF 5.256
Xiaoxiao Wei,Yuzhi Wang,Jing Chen,Panli Xu,Wei Xu,Rui Ni,Jiaojiao Meng,Yigang Zhou
Novel polymeric deep eutectic solvents (PDES) based on 3-acrylamidopropyl trimethylammonium chloride/D-sorbitol functionalized amino-magnetic (Fe 3 O 4 NH 2 ) metal-organic framework (HKUST-1-MOF) composites (Fe 3 O 4 NH 2 @HKUST-1@PDES) were synthesized and characterized by field emission transmission electron microscope (FE-SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), fourier transform infrared spectrometry (FT-IR), thermal gravimetric analysis (TGA), vibrating sample magnetometer (VSM) and zeta potentials . Then the composites were firstly utilized to selectively separate malachite green (MG) and crystal violet (CV) coupled with magnetic solid-phase extraction (MSPE). A response surface methodology (RSM) based on Latin hypercube sampling (LHS) was selected to analytically optimize the extraction parameters including initial concentration of dyes, extraction time, pH value and extraction temperature. The maximum extraction amount and optimal extraction conditions predicted by the RSM model matched well with the actual experimental results, and the extraction amount was 966.93 mg g −1 for MG and 788.90 mg g −1 for CV,respectively. The results indicated that the model possessed higher calculation accuracy through analyzing fewer sample points, thereby achieving theoretical prediction of extraction amount and conditions and being a prefect supplementary to actual experiments. The electrostatic interaction between the composites and cationic dyes played the main roll in the extraction process. The proposed extraction method exhibited lower limit of detection (98.19 ng mL −1 for MG and 23.97 ng mL −1 for CV) and preeminent precision (RSD ˂ 0.4%). Spiked recoveries of fish samples at three spiking levers ranged from 89.43% to 100.65% for MG and 95.29%–98.03% for CV. All results highlighted the excellent potential of Fe 3 O 4 NH 2 @HKUST-1@PDES-MSPE strategy in selective separation of cationic dyes in complex medium.
研究领域:
分析化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2019
·
IF 3.218
Zhiwei Qiu,Tao Yang,Rui Gao,Guifen Jie,Wanguo Hou
In this study, a novel Cu-based metal−organic frameworks (Cu-MOFs) composite material was prepared, and used to develop a sensitive and efficient electrochemical ratiometric sensor for dopamine detection. Gold nanoparticles (NPs) and the conductive poly(xanthurenic acid) p(XA) were assembled on the Cu-tetrakis (4-carboxyphenyl) porphyrin (TCPP) surface by electrodeposition and cyclic voltammetry (CV) method, which greatly improved the electrocatalytic performance of the Cu-MOF modified electrode . Two substances (dopamine/DA, paracetamol/PA) with different electrochemical peaks were added to the electrolyte solutions , where DA was the analyte and PA was as a reference. The ratiometric value of differential pulse voltammetry (DPV) oxidation current (I DA /I PA ) linearly increased with the increasing concentration of DA with low detection limit. This electrochemical ratiometric approach based on the metal−organic framework composites is expected to be a valuable strategy for detection of other analytes.
研究领域:
分析化学
·
生物传感器
·
神经化学
·
电分析化学
·
纳米材料
·
药物分析
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Jingying Xu,Teng Hou,Jing Zhou,Hao Ye,Yaru Wang,Lvzhu Cheng,Xianglong Li,Bin Yang
Photocatalytic fibrous membranes are regarded as one of the most proficient materials for environmental remediation because of their excellent photocatalytic activity, porous structure, and outstanding recyclability. However, the poor dispersion performance of photocatalysts in the polymer matrix and the low migration ability to the surface constrain the development of this technology. In this study, a versatile strategy was developed to facilitate the design of hydrophilic nanofibrous membranes with promising photocatalytic activity and robust recyclability by combining the loaded rare earth element La 3+ modified TiO 2 photocatalyst, introducing hyperbranched polymers as dispersants within electro-centrifugal spinning, and applying post-treatment to construct hydrophilic sites. Significantly, the removal efficiency of the fibrous membrane materials on the dye wastewater was as high as 89.34 %, and the treatment efficiency can still reach 81.68 % after five cycles. In addition, the photocatalytic mechanism for the degradation of organic pollutants was also analyzed. This work provides a new method for building advanced photocatalytic nanofibrous membranes, which is expected to be used in the treatment and remediation of environmental wastewater.
研究领域:
环境科学
·
材料科学
·
纳米技术
·
化学工程
·
光催化
·
高分子材料
·
水处理技术
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2014
·
IF 2.112
Jing Yang,Zhen Huang,Bingxin Huang,Jing Zhou,Xiaoxiong Xu
NASICON-type structure lithium ion conductors have been considered as promising solid electrolytes due to its very high Li + -ion conductivity and chemical stability. In this paper, NASICON-type structured Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) glass–ceramics are prepared from crystallization of glass powders, which are obtained by a simple melt-quench method. NH 4 H 2 PO 4 , H 3 PO 4 , P 2 O 5 and H 3 PO 4 &Al(PO 3 ) 3 are used as phosphorus sources, respectively. The obtained LAGP glass–ceramics are systematically characterized with X-ray diffraction, field emission scanning electron microscopy , differential scanning calorimetry and AC impedance spectroscopy . The different impurities are formed depending on the phosphorus sources, which further influence the microstructure. As a result, the lithium ion conductivity is significantly affected by the phosphorus sources. The highest conductivity of 5.21 × 10 − 4 S·cm − 1 is obtained when H 3 PO 4 is used as the phosphorus source under optimum conditions.
研究领域:
材料科学
·
固态离子学
·
无机非金属材料
·
能源材料
·
电化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2018
·Vol. 44
·期 9
·10420-10425
·
IF 3.057
Yurun Feng,Xue Guo,Hongyu Gong,Yujun Zhang,Yu Liu,Xiao Lin,Junjie Mao
PDCs-SiCN(Fe) ceramics were successfully fabricated with different content of ferric acetylacetonate (FA) by polymer-derived method. The effects of FA on the phase composition, microstructure, resistivity, dielectric properties , magnetic properties and microwave absorption properties of PDCs-SiCN(Fe) ceramics in the range of 2–18 GHz were investigated. The samples presented amorphous structure with a few crystalline phases of α-Fe and free carbon in the gaps, which were expected to be good soft magnetic materials . The average real permittivity and imaginary permittivity of PDCs-SiCN(Fe) ceramics with 50 wt% FA was about 14.1 and 5.3 respectively. Furthermore, the PDCs-SiCN(Fe) ceramics with 50 wt% FA addition content showed the broad absorption bandwidth in the 5.1–8.4 GHz with RL ≤ −10 dB (> 90% absorption) at 4 mm.
研究领域:
材料科学
·
功能陶瓷
·
电磁特性
·
吸波材料
·
复合材料
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2014
·
IF 3.916
Jiachang Huang,Li Zhou
The hydrolyzed peach gum polysaccharide (HPGP) prepared at acidic condition is investigated as an anionic polyelectrolyte for the first time. A hydrolysis mechanism is proposed by monitoring the hydrolysis efficiency and morphological change of crude peach gum, and the intrinsic viscosity of resulted HPGP as a function of hydrolysis time. Fourier transform infrared (FTIR) spectroscopy and ζ-potential measurements reveal that HPGP with multiple carboxylic groups is negatively charged in water in the pH range 3–11. The HPGP exhibits remarkable pH and ionic strength responsiveness, as proven by dynamic light scattering (DLS) and atomic force microscopy (AFM) measurements. Moreover, the layer-by-layer (LbL) self-assembly experiments further confirmed that the HPGP can be utilized as an anionic polyelectrolyte . Considering the facile availability, favorable compatibility and intriguing functionality of HPGP, this study opens up enormous opportunities for the large-scale utilization of peach gum resource.
研究领域:
高分子科学
·
生物材料
·
纳米技术
·
药物递送
·
表面化学
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ENERGY INSTITUTE
·
2021
·
IF 6.186
Dongjing Liu,Lingtao Yang,Bin Li,Jiang Wu
Rice husk , as an abundant agricultural waste and renewable biomass, is adopted to produce porous silica which is used as a potential carbon-free adsorbent for mercury emission control of coal-fired power plants. The rice husk derived porous silica (RHS) exhibits a good Hg 0 adsorption capability with Hg 0 removal efficiency above 80% in the temperature range of 60–140 °C, which is plausibly due to the big specific surface area and mesoporous structure. The mercury removal performance of RHS can be evidently reinforced by KBr modification. The optimal KBr loading value and reaction temperature are 2 wt% and 140 °C, respectively. Acidic gas components, such as NO and SO 2 , both show slight inhibitive effects on Hg 0 adsorption process probably owing to the competitive adsorption or the elimination of adsorption sites.
研究领域:
环境科学
·
大气污染控制
·
材料科学
·
吸附技术
·
能源工程
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2012
·
IF 3.832
Hu Qu,Bizhou Lin,Liwen He,Xiaorong Fan,Yi Zhou,Yilin Chen,Bifen Gao
TaWO 6 nanosheet was assembled into multilayer films by a layer-by-layer deposition technology with polyethylenimine as the linker. UV–vis absorption spectra in the assembly process showed a linear enhancement of absorbance at 238 nm per deposition cycle, indicating the successful formation of multilayer composite films, which were converted into polymer-free films by the heat treatment at 400 °C for 2 h. The bandgap energy and flatband potential of TaWO 6 nanosheet were estimated to be 3.48 eV and −0.79 V vs. Ag/AgCl, respectively. The photoelectrocatalytic degradation of Rhodamine B with the TaWO 6 nanosheet electrodes demonstrated that both the oxygen anionic radicals and the dye cationic radical are essential to mineralize the dye under visible-light-driven photocatalytic conditions. It is the first time to investigate the mechanism of photoelectrocatalysis of TaWO 6 nanosheet electrode.
研究领域:
材料科学
·
物理化学
·
环境催化
·
纳米科技
·
能源材料
✓ 已验证
DOI
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
·
2013
·Vol. 101
·期 8
·1359-1366
·
IF 2.308
Yu-fei Wang,Hong-feng Guo,Da-jun Ying
Dural closure after the neurosurgery can prevent postoperative complications. Although many types of dural substitute have been developed, most of them lack functional and structural characteristics compared with the natural dura mater. In this study, we used electrospinning method to fabricate a multilayer scaffold to promote dural repair. The inner layer of the scaffold that faces the brain tissue is composed of poly-lactic acid (PLA) to reduce tissue adhesion. The middle layer of the scaffold is composed of poly-ɛ-caprolactone and PLA, which provides a watertight seal. The outer layer of the scaffold contains a large amount of collagen to promote cell attachment and proliferation. The results from in vitro study and an animal model have shown that this multilayer fibrous scaffold has sufficient mechanic strength and biochemical properties to enhance dural repair. Therefore, fabrication of scaffold with multiple functional and structural layers may provide a novel approach for tissue engineering. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 101B: 1359–1366, 2013.
研究领域:
生物材料
·
神经外科
·
组织工程
·
再生医学
·
生物医学工程
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·Vol. 49
·期 2
·1846-1854
·
IF 5.532
Xinkun Liu,Ying Dai,Xinmei Pei,Wen Chen
The electrocaloric (EC) effect cooling technique of environmentally friendly lead-free thin film materials driven by electric fields has recently gained tremendous attention due to the urgent demand for microelectronic and integrated circuit refrigeration devices. However, the widespread use of lead-free materials in EC devices is seriously hindered due to the small electrocaloric temperature change (ΔT) within a narrow operation temperature span (T span ) near room temperature. Here, lead-free Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9-x Sn x O 3 (BCZT-xSn, 0 ≤ x ≤ 0.03) thin films were prepared on substrates (Pt/Ti/SiO 2 /Si) via a sol-gel route. The BCZT-0.02Sn thin film presents an excellent EC effect (ΔT = 32.74 K, ΔS = 37.18 J kg −1 K −1 ) and large EC strength (ΔT/ΔE = 0.033 K cm kV −1 , ΔS/ΔE = 0.037 J cm K −1 kg −1 kV −1 ) over a wide T span (∼26 K) under 1000 kV cm −1 near room temperature. The giant ΔT is mainly attributed to the emergence of an intermediate O phase and the formation of a multiphase (R, O and T phases) coexistence structure at room temperature, while the diffuse phase transition behavior is responsible for the wide T span . Our study provides a new idea for developing environment-friendly EC materials with an excellent room-temperature ΔT over a broad operational temperature region.
研究领域:
材料科学
·
功能材料
·
固态物理
·
环境友好材料
·
制冷技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 14
·8039-8047
·
IF 3.049
Peng Gu,Xinghua Zhu,Dingyu Yang
Mn-doped ZnO (MZO) films were prepared on glass substrates using sol–gel dip-coating technology. The microstructural, morphological, optical and photoelectric properties of MZO films were investigated at different withdrawal speeds (WS: 20, 40, 60 and 80 mm s−1). The X-ray diffraction (XRD) patterns showed that all the films obtained were polycrystalline with a hexagonal structure, and the highest crystallinity of MZO films was observed as films were deposited at 40 mm s−1. The UV-Vis spectra revealed that the average optical transmittance of all samples was over 60% and the energy band gap of films decreased from 3.616 to 3.254 eV with the increase in withdrawal speed. The formed Au/MZO/Au photodetectors (PDs) indicate that a device prepared at 40 mm s−1 shows superior properties both in response speed and detection capability, and the rise time is 1.871 s and fall time is 3.309 s at 365 nm for 3 V bias and the detectivity (D*) reaches ∼1.7 × 1010 Jones. Moreover, the responsivity of PDs is also affected by the distance between Au electrodes and external bias. This research provides a simple way to fabricate the UV PDs based on MZO films with faster response and higher detectivity.
研究领域:
材料科学
·
半导体物理
·
光电子学
·
薄膜技术
·
纳米材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
·
2024
·
IF 2.5
Jitao Zhang,Xingkui Mu,Qingfang Zhang,Natallia Poddubnaya,Dmitry Filippov,Jiagui Tao,Fang Wang,Liying Jiang,Lingzhi Cao
Development of high-quality ferrites behaved enhanced properties via inclusion of ions in 3d n and 4f n series are desirable for efficient power conversion solid-state devices. Nevertheless, inadequate microscopic behaviors with complex chemistry in materials enables researchers to design and produce the macroscopic target device that remained rudimentary and mindless. In this work, the microscopic properties in nickel-zinc spinel ferrite series of Ni 0.8 Zn 0.2 Sm x Fe 2- x O 4 ( x = 0, 0.02, 0.04, 0.06, 0.08) encompassing XRD, SEM, EDS, VSM, FTIR and ESR were systemically characterized, and the evolutionary mechanism of the corresponding structural, micro-structure, elemental composition and distribution, magnetic, cations exchange, and micro-magnetic behavior was profoundly revealed. Under microscopic examinations, the optimum composition at x = 0.02 with well-arranged spinel structure, dense texture with expected elemental composition, favorable soft magnetic properties and micro-magnetic behaviors is evident. Fortunately, this optimum is in coincidence with the achievable maximum magneto-mechanical coefficient, even the macroscopic electric properties with stronger magnetoelectric (ME) interactions and higher power conversion efficiency (PE) in tri-layered ME samples as expected. Experimental results show that the eventual PE reaches its maximum of 75.67 % under R opt = 33kΩ for samples at x = 0.02, and exhibit a 2.24 times higher PE than that of sample without samarium substitution. These findings provide a holographic perspective to connect the microscopic beneficial effects of materials to bulk device that are promising for efficient power conversion solid-state electronics.
研究领域:
材料科学
·
磁性材料
·
固态电子学
·
功能陶瓷
·
能源转换技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）