JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Qiong Li,Hao Qian,Tianyang Zheng,Xiaoyuan Sun,Yunfei Liu,Yinong Lyu
The cation displacement closely related to the local symmetry and corner-connected oxygen octahedral rotation are the structural origin of macroscopic properties in ABO 3 perovskite oxides. This work describes in detail the relationship between microstructure and macroscopic properties in 0.78BT-0.12CT-0.1BZS ceramic, which achieves the enhanced strain of 0.19 % with a hysteresis of 6.56 %. The atomic level structure is revealed by aberration corrected scanning transmission electron microscope (AC-STEM). The AC-STEM HAADF images reveal the coexisting of polar nanoregions with O and T symmetries. Such a microstructure has a lower energy barrier, facilitating dynamic polarization rotation flexibly under external stimuli. The AC-STEM ABF image reveals the existence of the BO 6 octahedral rotation, with rotation patterns of the a 0 b 0 c 0 and a - b + c - , and rotation angles are quantitatively measured. The BO 6 octahedral rotation and cation displacement are found to be consistent, the greater octahedral rotation with greater cation displacements. These results have important implications for understanding the structural origin of the excellent properties in ferroelectrics .
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·
IF 7.139
Shuochao You,Yihui Wu,Yuxin Wang,Zhen He,Li Yin,Yuan Zhang,Zesheng Sun,Zejie Zhang
The development of extremely active bifunctional non-noble electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is pivotal for water splitting but remains challenging. Herein, self-supported Ni–Fe–Sn electrocatalysts were fabricated on nickel foam (NF) through a simple and facile pulse electrodeposition process. Under optimal conditions, the prepared Ni–Fe–Sn electrocatalysts exhibited excellent bifunctional properties in alkaline medium and required ultralow overpotentials of only 27 and 201 mV for HER and OER, respectively, to reach the current density of 10 mA cm −2 . Importantly, the same Ni–Fe–Sn electrocatalyst can be assembled as the anode and the cathode in a two-electrode system. It demanded a fairly low applied voltage of 1.55, 1.72, and 1.87 V to produce 10, 50, and 100 mA cm −2 , respectively, and exhibited excellent long-term stability. The excellent electrocatalytic water splitting performance of the Ni–Fe–Sn film was mainly associated with its intrinsic catalytic activity derived from the modulation of the electronic structures among Ni, Fe, and Sn by using the appropriate atomic ratio of Ni: Fe: Sn.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2022
·
IF 4.331
Xiaoyan Wang,Ya-Jun Cheng,Suzhe Liang,Qing Ji,Jin Zhu,Yonggao Xia
Ultrafine SnO2/Sn nanoparticles encapsulated into an adjustable meso-/macroporous carbon matrix have been successfully fabricated by the in situ SiOx sacrificial strategy. The control over the void space in the carbon matrix effectively improves the accessibility of the SnO2/Sn toward an electrolyte solution. More importantly, the void space also provides an efficient means to accommodate the mechanical stress caused by the volume change of the SnO2/Sn over cycles. As a result, the enhanced electrolyte accessibility and suppressed mechanical stress improve the electrochemical performance regarding reversible capacity, cyclic stability, and rate capability. A reversible capacity of 1105 mAh g–1 is still retained after 290 cycles at 200 mAg–1, and the capacity still can keep at 107 mAh g–1 at a high current density of 10 A g–1.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Xingkun Wang,Chen Zhu,Yutao Xu,Jianan Xie,Miao Meng,Hong Dong,Jincheng Liu,Xiaolei Sun,Feng Luo
As integrated circuit technology scales toward the Angstrom era, the limitations of traditional spin-coated wet photoresists-specifically regarding stochastic defects and pattern collapse-have become critical bottlenecks for high-numerical-aperture extreme ultraviolet (high-NA EUV) lithography. Consequently, dry photoresists deposited via molecular layer deposition (MLD) have emerged as a transformative solution, offering atomic-level thickness control and superior uniformity. Here, we report a tin-based hybrid dry photoresist synthesized via MLD using tetrakis(dimethylamino)tin and 2-butene-1,4-diol. A distinctive feature of this material is its tunable polarity, governed by the development modality: wet development in an ammonia solution yields a positive-tone resist, while dry development using fluorine-based inductively coupled plasma (ICP) etching results in a negative-tone profile. Under 50 keV electron beam exposure (wet development) conditions, we achieved an outstanding resolution limit of 7 nm for a single line, whilst under EUV exposure conditions, we achieved a resolution limit of 18 nm for a single line. To decode the underlying physics of this dual-tone behavior, we employed a rigorous multiscale approach combining in-situ characterization (XPS, TEM, EDS, and EUV-irradiated mass spectrometry) with density functional theory (DFT) calculations. These theoretical and experimental insights elucidate the specific bond-breaking and reorganization mechanisms driving the polarity switch. This work not only presents a high-performance candidate for next-generation lithography but also establishes a fundamental framework for the mechanistic design of advanced dry photoresists.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Yaowei Lu,Yongxing Wang,Qinghu Tang,Qiue Cao,Wenhao Fang
The synergistic effect in a bimetallic oxide usually plays a vital role in determining the behavior of supported-metal catalysts. We show the unique synergy in a Sn x Mn 1 O y oxide, which can boost the hydrogenation catalysis of supported Pt nanoparticles for selective conversion of levulinic acid (LA) to γ-valerolactone (GVL). On a series of Pt/Sn x Mn 1 O y catalysts with a similar Pt loading ( ca. 0.44 wt%) and a controlled Pt size ( ca. 2.7 nm), the intrinsic TOF presents a volcano-like dependence on Pt 0 sites and Lewis acidity, which is determined by the variable synergistic effect between MnO y and SnO y . The optimal Pt/Sn 0.8 Mn 1 O y catalyst exhibits a high i TOF of 2709 h −1 and achieves 100% selectivity to GVL at 99% conversion of LA at 120 ℃ and 2 MPa of H 2 . DFT calculations demonstrate that the incorporation of Sn can provide a lower energy barrier for the crucial elementary reactions.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD SCIENCE
·
2019
·Vol. 84
·期 8
·2042-2049
·
IF 2.081
Lipeng Han,Qingna Lin,Guoqin Liu,Dongxue Han,Li Niu,Dongxiao Su
It is important to inhibit the food-derived, potentially hazardous chemical glycated lipids by natural products. A model system was established and the products are identified to study the inhibitory mechanism of four types of catechin, resveratrol (RES), and the synthetic antioxidants butylated hydroxylanisole (BHA) and tert-butylhydroquinone (TBHQ) on the formation of carboxymethyl 1,2-dipalmitoyl-sn-glycero-3-phosphatidylethanolamine (CM-DPPE) by determining hydroxyl radical (OH·), Amadori-1,2-dipalmitoyl-sn-glycero-3-phosphatidylethanolamine (Amadori-DPPE) and glyoxal (GO). The results show that the inhibitory rates of catechin and RES on the content of CM-DPPE in the model system are higher than those of BHA and TBHQ. There are at least two inhibitory mechanisms of antioxidants on CM-DPPE. (1) Antioxidants scavenge OH·, which blocks the process of Amadori-DPPE oxidation to form CM-DPPE. (2) Antioxidants trap GO, which blocks the reaction between GO and DPPE to form CM-DPPE. This research will reveal the inhibitory mechanisms of natural antioxidants on glycated lipids from the aspect of scavenging OH· and trapping GO. Practical Application Food manufacturers should pay attention on the production of glycated lipids in food processing. This study will provide the theoretical basis for the use of natural products to inhibit the formation of food-derived glycated lipids. Natural products, such as catechin and resveratrol, can substitute chemical synthesis antioxidants, such as butylated hydroxylanisole and tert-butylhydroquinone, in food processing, which inhibit the formation of glycated lipids.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2014
·
IF 5.9
Yanchun Yang,Gang Wang,Wangen Zhao,Qingwen Tian,Lijian Huang,Daocheng Pan
Solution deposition approaches play an important role in reducing the manufacturing cost of Cu2ZnSnSe4 (CZTSe) thin film solar cells. Here, we present a novel precursor-based solution approach to fabricate highly efficient CZTSe solar cells. In this approach, low-cost elemental Cu, Zn, Sn, and Se powders were simultaneously dissolved in the solution of thioglycolic acid and ethanolamine, forming a homogeneous CZTSe precursor solution to deposit CZTSe nanocrystal thin films. Based on high-quality CZTSe absorber layer, pure selenide CZTSe solar cell with a photoelectric conversion efficiency of 8.02% has been achieved without antireflection coating.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
·
2014
·
IF 3.679
Sheng-jie Xia,Xiao-bo Zhou,Wei Shi,Guo-xiang Pan,Zhe-ming Ni
Three transition metal oxides (Fe 3 O 4 , CeO 2 and SnO 2 ) modified Zn/Ti–layered double hydroxides (LDHs) were successfully synthesized. These materials were characterized by powder X-ray diffraction (XRD), inductively coupled plasma atomic emission spectrometry (ICP-AES), Brunauer–Emmett–Teller (BET) and UV–vis diffuse reflectance spectrum (UV–vis) for the purpose of confirming the formation of good crystal structure. Comparing with original layered double hydroxides, the transition metal oxides modified Zn/Ti layered double hydroxide materials show narrower band gap, larger surface area, smaller pore volume, pore size distribution, and higher removal efficiency for acid red 14 under visible light. The decomposition efficiency of acid red 14 was all over 92% after 120 min. In addition, the thermal regeneration for re-use of layered double hydroxide materials after photodegradation was feasible for at least four cycles (degradation amount still all over 80%). Furthermore, the kinetic parameters, intermediates and possible photocatalytic pathways for acid red 14 decomposed by these transition metal oxides modified Zn/Ti layered double hydroxide materials were also investigated carefully.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2014
·Vol. 38
·期 8
·3999-4006
·
IF 3.159
Zhenzhen Wang,Shangru Zhai,Bin Zhai,Zuoyi Xiao,Feng Zhang,Qingda An
Novel protocol towards multifunctional magnetic organic–inorganic core–shell nanostructured catalysts of Fe3O4@SN/HPW@CG–Ag with tailored properties are presented in this work. Such nanocomposites congregate the properties and functions of a single component into a whole. For instance, Fe3O4 cores protected by amino-functionalized SiO2 shell endowed the composites with superparamagnetism (28.6 emu g−1) and thereby facilitate the process of separation and recovery. Phosphotungstic acid, as a bridging agent, provided a strong interaction for the anchoring of glutaraldehyde cross-linked chitosan onto the surface of Fe3O4@SN. More interestingly, chitosan could simultaneously behave as a stabilizer and reductant for the in situ synthesis of “green” Ag NPs without addition of any other reducing agent or organic solvent, and Ag NPs provided the compounds with a catalytic performance. Further the size, loading of Ag NPs and the thickness of the chitosan layer were all controllable. Meaningfully, the as-synthesized catalyst Fe3O4@SN/HPW@CG–Ag exhibited an exceptional catalytic performance for the reduction of 4-nitrophenol in the presence of sodium borohydride (the reaction was accomplished within 7 min) and could be reused at least 10 times with good stability by means of convenient magnetic separation. Thence, the design philosophy of the multifunctional robust Ag-based nanocatalysts may pave the way for the synthesis of other catalyst systems with long-term stability.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2016
·
IF 2.686
Yanjie Wang,Kiyoshi Nomura,Xin Liu,Alexandre I. Rykov,Changzi Jin,Tao Liu,Junhu Wang
Graphical Room-temperature ferromagnetism (RTFM) was found in 57 Fe-TiO 2 and 57 Fe/Sn-TiO 2 materials prepared by a soft-chemical solution method. Their magnetic properties were found to decrease with increasing degree of 57 Fe doping. Fe 3+ –oxygen vacancy (V O )–Fe 3+ centers are responsible for the observed RTFM. A series of 57 Fe-doped TiO 2 and 57 Fe/Sn-codoped TiO 2 materials were prepared by a soft-chemical solution process with various 57 Fe concentrations from 0.1 to 1.0 at.-% and a fixed Sn concentration of 2.0 at.-%. In this process, an aqueous H 2 O 2 solution reacts with iron and titanium or iron, tin, and titanium precursor compounds to produce peroxopolymetallic acids. The structures and magnetic properties of the products were characterized by magnetic-moment measurements, X-ray diffraction, and Raman and Mössbauer spectroscopy. The results showed that all samples consisted of a rutile phase (and a trace amount of anatase in 57 Fe-TiO 2 ). All samples exhibited hysteresis loops in the M – H curves, which demonstrated the presence of room-temperature ferromagnetism. In addition, their magnetic properties decreased with increasing degree of 57 Fe doping. Oxygen vacancies were considered to be responsible for the presence of ferromagnetism.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2017
·
IF 3.387
Lifang Zhang,Peng Dou,Wenjing Wang,Jiao Zheng,Xinhua Xu
The novel Sn-Cu nanotubes enveloped in three-dimensional (3D) hierarchical polyaniline (PANI) hydrogel (Sn-Cu/PANI) were successfully prepared as a high performance anode for lithium-ion battery. The binder-free electrode exhibits reversible capacity of 548 mA h g −1 after 500 cycles and admirable rate capacity even up to 5000 mA g −1 . The exceptional electrochemical performance of Sn-Cu/PANI hydrogel could be attributed to the unique structure: (1) The inactive Cu matrix in binary Sn-Cu compounds and the tubular construction conduce to relieve the volume swing; The high porosity originated from galvanic replacement reaction accelerates ions transmission, which contributes to rapid charging and discharging. (2) The 3D porous PANI framework offers a continuous electron and lithium ions transport network among the whole electrode; the hierarchical PANI serves as mechanical support to accommodate the stress related to the large volume change of Sn-Cu nanotubes, thus reducing the risk of electrode pulverization.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2024
·
IF 10.5
Huiliang Wen,Wei Xu,Sen Lin,Aiguo Guan,Yingna Zhang,Xin Li,Chongbo Liu
As a representative magnetic oxide absorber, Fe 3 O 4 has attracted considerable research attention owing to its remarkable magnetic saturation strength as well as semiconducting properties. Doping Fe 3 O 4 with La 3+ leads to 3d-4f magnetic coupling and ion distribution changes due to the unique electron configuration and large ionic radius of La 3+ , thereby greatly enhancing the magnetic performance. However, high density, low dielectric loss, and low permeability at high frequencies inhibit the electromagnetic wave absorption (EMWA) performance of ferrites. In this study, stick-shaped Sn metal-organic framework (MOF) is in-situ grown on La 3+ -doped Fe 3 O 4 using a surfactant. After high-temperature annealing, the SnO 2 /porous carbon composites derived from Sn-MOF wrap the ferrite, forming a core-shell heterostructure, which not only prevents oxidation but also enhances the EMWA performance. Among the prepared La x Fe 3-x O 4 /SnO 2 /C (LFSC) samples, LFSC-2 (with La x Fe 3-x O 4 to Sn-MOF ratio of 1:2) exhibits strong absorption performance with a minimum reflection loss ( RL min ) of −44.1 dB. Furthermore, the gradient metamaterial based on LFSC-3 shows ultra-broadband EMWA with an effective absorption bandwidth ( RL min ≤ −10 dB) of 13.17 GHz. In addition, the LFSC-2 sample demonstrates excellent radar stealth capability in the radar cross section (RCS) far-field response, achieving an RCS reduction value of 20.4 dB∙m 2 .
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）