ChemSusChem
·
2024
·
IF 7.5
Rui Yang,Xiaozhong Zheng,Hao Fu,Xinyue Cao,Yangguang Hu,Yiyin Huang
Graphical Cu 7 S 4 /Cu nanoflowers with strong CO 2 adsorption and abundant boundaries were developed by a facile thermal reduction, which underwent in situ dynamic restructuring during ECR to generate highly active S-doped Cu 2 O/Cu hybrid catalyst. Thermodynamic and experimental analysis revealed that the optimized adsorption of the HCOO * intermediate on S−Cu 2 O/Cu was regulated and surface H was suppressed by S-doping. The high activity for CO 2 -to-HCOOH attributed to the strengthen CO 2 adsorption, abundant boundaries at Cu 2 O/Cu interfaces, and the regulation of adsorption energy by S-doping Optimized catalytic properties and reactant adsorption energy played a crucial role in promoting CO 2 electrocatalysis. Herein, Cu 7 S 4 /Cu underwent in situ dynamic restructuring to generate S−Cu 2 O/Cu hybrid catalyst for effective electrochemical CO 2 reduction to formate that outperformed Cu 2 O/Cu and Cu 7 S 4 . Thermodynamic and in situ Raman spectra revealed that the optimized adsorption of the HCOO* intermediate on S−Cu 2 O/Cu was regulated and the H 2 pathway (surface H) was suppressed by S-doping. Meanwhile, Cu 7 S 4 /Cu nanoflowers created abundant boundaries for ECR and strengthened the CO 2 adsorption by inducing Cu. These findings provide a new perspective on synthetic methods for various electrocatalytic reduction processes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2024
·
IF 4.1
Shixuan Wang,Liuyan Zhang,Chenrui Shi,Zeyi Guan,Gengzhe Shen,Guibin Tan,Yanmei Zhang
The development of an efficient and cost-effective electrocatalyst for the Hydrogen Evolution Reaction (HER) that can be widely applied in industrial settings poses a multifaceted challenge. This research involved fabricating a NiCo-LDH/Cu electrode as a self-supported catalyst for hydrogen evolution on nickel foam using a solvothermal method and constant potential electrodeposition. In comparison to the NiCu electrocatalyst produced through a single-step electrodeposition, the NiCo-LDH/Cu hydrogen evolution electrode prepared via this combined approach exhibited significant electrocatalytic performance for HER in an alkaline electrolyte. The NiCo-LDH/Cu catalytic electrode requires only an overpotential of 78.0 mV to achieve a current density of 10 mA·cm −2 in 1 M KOH. The current density required to catalyze the hydrogenation reaction is reduced by 64 % compared to pure nickel foam. This reduction accelerates the hydrogenation catalytic reaction and enhances electrochemical stability. The remarkable HER efficiency of the NiCo-LDH/Cu catalytic electrode primarily stems from the increased active surface area facilitated by the LDH structure and the synergistic impact generated during the NiCu co-deposition process. This work shows an economical and practical method for developing efficient non-precious metal catalytic electrodes.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Huijuan Chen,Fangrui Gao,Wenbin Ren,Lulu Du,Kaifeng Xue,Pinhua Zhang,Changmin Shi,Li Lv,Guangliang Cui
Ultra-sensitive hydrogen sulfide (H 2 S) detection technology at low temperatures provides critical support for the application of one-time alert systems under extreme conditions, ensuring reliable monitoring of H 2 S in low-temperature environments and enhancing safety and practicability. In this study, we developed a novel low-temperature H 2 S sensor based on Cu/Cu 2 O nanoarrays, prepared through a combination of 2D electrodeposition in situ assembly and the hydrothermal method. The heterointerface between Cu nanowires and Cu 2 O nanocubes presents a high barrier, which can be modulated to zero through the formation of continuous Cu x S conductive channels via the vulcanization reaction, thereby achieving excellent sensitivity and selectivity towards H 2 S at low temperatures. At freezing temperatures and low H 2 S concentrations (≤20 ppm), the sensors show ideal recovery and reasonable sensitivity (R=150 to 10 ppm H 2 S at 0 °C). However, the response significantly increases (R=5624 at 10 ppm H 2 S at 50 °C) and recovery is lost under reversed conditions. First-principles calculations have confirmed that the enhanced H 2 S adsorption at the heterointerface is the primary reason for the robust response observed at 0 °C. Experimental results demonstrate that the Cu/Cu 2 O nanoarrays were capable of rapid detection of H 2 S at low temperatures through modulation of heterointerface barriers.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2024
·Vol. 34
·期 22
·2310925
·
IF 18.5
Xiangbiao Liao,Xiao Wang,Chong Yan,Baidu Zhang,Yong Ni,Haozhi Yuan,Yong Pan,Jun'an Pan,Jiaqi Huang
The all-in-one design of cathode and anode is a promising strategy to improve energy density and assembly efficiency for lithium batteries. However, it is an important prerequisite to combine negative and positive current collectors in a single sheet. Here, an asymmetric structure of bipolar composite current collector (BCCC), thin copper (Cu) and aluminum (Al) metal layers respectively deposited on each side of a thin polyethylene terephthalate (PET) polymer substrate is developed. Unlike conventional metal foils, the electronically insulative polymer blocks electron transfer between the cathode and anode coated on each side of BCCC. Buckling-based mechanics measurement and molecular simulation are conducted to quantitatively evaluate the interfacial strength of metal/polymer, which is enhanced by introducing an intermediate chromium (Cr) layer. For applications in anode-free wound batteries, the integrated sheet of separator/cathode/BCCC can simplify the alignment of the electrodes during the winding process. Without special surface and electrolyte optimizations, a higher Coulombic efficiency (99.1%) and larger capacity retention (50.0%) are achieved after 100 cycles in the LiNi 0.8 Co 0.1 Mn 0.1 O 2 anode-free battery than the battery using Cu foils.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Jun-Qing Ye,Pin-Xi Wang,Xin Rong,Qi-Da Ding,Jun-Feng Qian,Sheng-Chun Chen,Ming-Yang He,Qun Chen
Vinylsilane compounds are essential chemical feedstocks and intermediates in organic synthesis. A heterogeneous Cu-containing mesoporous ZSM-5 zeolite catalyst developed through an in-situ doping method can be used for preparing vinylsilane compounds via decarboxylative coupling with remarkable catalytic efficiency. The mesoporous structure along with the appropriate surface area and pore volume of the catalyst is likely to be responsible for facilitating mass transfer in the reaction process. Additionally, due to the suitable Brønsted and Lewis acid active sites, adsorption and activation of reactant molecules can be readily triggered to promote the generation of alkoxyl radicals, which is the crucial species to complete the catalytic cycle. Importantly, the transformation exhibits high efficiency, broad substrate scope, and good reusability for at least six cycles.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Xiao-Zhen Feng,Kun-Zhi Wang,Ke-Hang Song,Guo-Cheng Han,Bing-Lun Li,Heinz-Bernhard Kraatz
Moxifloxacin (MOX) and gatifloxacin (GAT) are structurally similar and possess close oxidation peak potentials, making it difficult for simultaneous detection by electrochemical methods. To address this, an electrochemical sensor was constructed with reduced graphene oxide (rGO) and copper porphyrin complex (Cu-TCPP), achieving signal amplification and simultaneous detection of MOX and GAT. The linear relation range from 5.00 to 600.00 μmol·L −1 for MOX (LOD is 1.34 μmol·L −1 ) and 10 to 300 μmol·L −1 for GAT (LOD is 0.59 μmol·L −1 ). When applied to water samples, it achieved recoveries of 100.09–112.02 % with a relative standard deviation (RSD) of less than 6 % for MOX, and 97.27–110.72 % with an RSD of less than 4 % for GAT. Further calculations indicated that the electro-oxidation of GAT involved two protons and two electrons.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS
·
2024
·Vol. 24
·期 11
·3623
·
IF 3.4
Arif Ullah Khan,Muhammad Tahir,Fazal Ul Nisa,Mizna Naseem,Iqra Shahbaz,Zeyu Ma,Zilu Hu,Abdul Jabbar Khan,Muhammad Sabir,Liang He
Metal-oxide-based gas sensors are extensively utilized across various domains due to their cost-effectiveness, facile fabrication, and compatibility with microelectronic technologies. The copper (Cu)-based multifunctional polymer-enhanced sensor (CuMPES) represents a notably tailored design for non-invasive environmental monitoring, particularly for detecting diverse gases with a low concentration. In this investigation, the Cu-CuO/PEDOT nanocomposite was synthesized via a straightforward chemical oxidation and vapor-phase polymerization. Comprehensive characterizations employing X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and micro Raman elucidated the composition, morphology, and crystal structure of this nanocomposite. Gas-sensing assessments of this CuMPES based on Cu-CuO/PEDOT revealed that the response current of the microneedle-type CuMPES surpassed that of the pure Cu microsensor by nearly threefold. The electrical conductivity and surface reactivity are enhanced by poly (3,4-ethylenedioxythiophene) (PEDOT) polymerized on the CuO-coated surface, resulting in an enhanced sensor performance with an ultra-fast response/recovery of 0.3/0.5 s.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2025
·
IF 9.6
Hongyang Zhang,Rui-Hong Gong,Yu−Shan Lin,Tao Wang,Dou Luo,Jiahua Li,Li-Sha Shen,Wai-Yeung Wong,Sibao Chen,Guo-Qing Chen
Supramolecular polymers driven by the metal-ligand coordination possess reversible bonds, making them promising candidates for integrating the therapeutic functions of metal ions and small-molecule drugs, and subsequently releasing these components within cells after endocytosis. In this study, a kind of supramolecular polymer, SHICU, is developed, composed of Shikonin ligand and Cu(II) ion. Upon reduction by intracellular glutathione (GSH), SHICU dissociates to release Shikonin, Cu(II), and SHICU fragments. The released Shikonin and Cu(II) exhibit a synergistic antitumor effect through the reactive oxygen species (ROS)-dependent necrosis. Meanwhile, the released SHICU that remains structural integrity induces a distinct antitumor mechanism by triggering cuproptosis in tumor cells. This dual functionality, combining ROS-dependent necrosis and cuproptosis, highlights the potential of SHICU in advancing antitumor therapies, while the integration of supramolecular polymers with the emerging cell death mechanism of cuproptosis facilitates the development of innovative cancer drugs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Battery Energy
·
2024
·
IF 9
Xiangchao Xu,Fen Qiao,Yanzhen Liu,Wenjie Liu
Cu(OH) 2 has the advantages of ease of structural regulation, good conductivity, and relatively low cost, making it a suitable candidate material for use as an electrocatalyst. However, its catalytic efficiency and stability still need to be improved further. Therefore, Cu(OH) 2 /Cu 2 S was successfully prepared on copper foam (CF) using the in situ growth and hydrothermal method. The structural characterization showed that sulfidation treatment induced transformation of Cu(OH) 2 /CF from smooth nanorods into a coral-like structure, which exposed more active sites of Cu(OH) 2 /Cu 2 S and enhanced the performance of electrocatalytic hydrogen evolution reaction (HER). Compared with Cu(OH) 2 , Cu(OH) 2 /Cu 2 S showed better alkaline HER performance, especially when the vulcanization concentration was 0.1 M, the overpotential of Cu(OH) 2 /Cu 2 S was 174 mV, and the reaction kinetics was 64 mv dec −1 at a current density of 10 mA cm −2 . In this work, the morphology and electronic structure of copper-based metal sulfide electrocatalysts were adjusted by sulfide treatment, which provided a new reference for improving HER performance.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2024
·
IF 18.5
Zhenyao Li,Wei Wei,Xuli Hu,Zhen Zhang,Yangshun Hu,Yushan Wu,Yao Wang,Junchen Xu,Mingyue Ding
While engineering lattice strain has been proven effective in enhancing the electrochemical CO 2 reduction performance of a catalyst, the correlation between strain effect and the intrinsic catalytic mechanism has remained elusive. Herein, a photolithography-inspired method is proposed to regulate Cu(111) lattice strain. By irradiating the photosensitive Cu(Acac) sol–gel, Acac chelate bond undergoes π→π * electronic transition, and the ring-closed Cu(Acac) decompose into the stabilized Cu(Acac) mesh which presents as nanospots embedded onto the surface of the Cu cluster. The photoinduced nanospots serve to exert compressive strain to the Cu(111) lattice in which the lattice distance is reduced by 5.7–11.4%. Herein, the catalyst with 11.4% lattice compression exhibits enhanced C 2 H 4 production capabilities, reaching a maximal Faradaic efficiency of 57.00%, and a high partial current density of 456.01 mA cm −2 . Theoretical calculations reveal that the compressed Cu(111) lattice exhibits reduced surface energies, leading to a significant drop in the C─C coupling reaction free energy from 1.16 eV over the pristine lattice, to 0.57 eV over the 10% compressed lattice. Additionally, the 10% compressed lattice facilitates spontaneous *O splitting immediately after OC─CHO coupling which leads to the generation of C 2 H 4 -favoring *CCH intermediate.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Zhongqiu Zhao,Zixuan Zhou,Lei Wang,Ying Zhang,Yaguang Sun,Mingchang Zhu,Shuangyan Wu
Riboflavin was first isolated from milk and widely used in food, biological and pharmaceutical fields. Accurate detection of riboflavin content is of great significance for the treatment of related diseases and the supervision of food/drug quality. In this paper, a 1D chain copper-based coordination polymer with excellent water stability was synthesized by hydrothermal method using rigid ligand 1,10-phenanthroline and flexible ligand 1,4-phenylenedioxydiacetic acid, named Cu-phen-PEDA. Based on the Förster resonance energy transfer (FRET) and dynamic quenching detection mechanism, the emission spectrum of Cu-phen-PEDA overlaps with the absorption spectrum of riboflavin. As an energy donor in this case, Cu-phen-PEDA significantly increases the fluorescence intensity of riboflavin (energy acceptor), while simultaneously decreasing its own fluorescence intensity, which is an effective proportional-building strategy. In the lower concentration range, riboflavin can be specifically recognized by ratiometric fluorescence with a good linear relationship, and the detection limit is as low as 23 nM. The potential aspects of its specificity, stability, reusability and practical application were explored.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale Horizons
·
2025
·
IF 6.6
Xiao Wan Han,Xu Chen,Tianle Yang,Ying Yi Luo,Rui Xue Liang,San Qi An,Xinli Liu
Cuproptosis has recently received much attention in cancer treatment. However, copper ionophores don’t show the obvious clinical efficacy. Although some Cu-based and copper ionophores-loaded nanomaterials have been applied to induce cuproptosis, it is difficult to achieve the clinical translation limited by the complicated composition, harsh synthesis condition, external stimulus, and potential biotoxicity. Phytic acid, a naturally occurring organic phosphorus carbohydrate, possesses distinct antineoplastic effect on multiply types of cancer and high biocompatibility. Based on metal-phosphonate coordination, a novel Cu-phytic acid nanozyme (denoted as CP) with pH/GSH dual-response was fabricated by a “one-spot” method. CP with three enzyme-mimicking activities enhanced cuproptosis therapy through GSH depletion, reactive oxygen species augment, hypoxia relief and the attenuation of glycolysis. As a proof of concept, Elesclomol (a copper ionophore)-resistant A549 cells were used to investigate CP- induced cuproptosis for inhibition of tumor growth in vitro and in vivo.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）