Research
·
2022
·
IF 11.036
Jiayu Di,Haojin Li,Li Chen,Siyu Zhang,Yinhui Hu,Kai Sun,Bo Peng,Jie Su,Xue Zhao,Yuqi Fan,Zhenhua Lin,Yue Hao,Peng Gao,Kui Zhao,Jingjing Chang
Exploring halogen engineering is of great significance for reducing the density of defect states in crystals of organic-inorganic hybrid perovskites and hence improving the crystal quality. Herein, high-quality single crystals of PEA2PbX4 (X = Cl, Br, I) and their para-F (p-F) substitution analogs are prepared using the facile solution method to study the effects of both p-F substitution and halogen anion engineering. After p-F substitution, the triclinic PEA2PbX4 (X = Cl, Br) and cubic PEA2PbX4 (X = I) crystals unifies to monoclinic crystal structure for p-F-PEA2PbX4 (X = Cl, Br, I) crystals. The p-F substitution and halogen engineering, together with crystal structure variation, enable the tunability of optoelectrical properties. Experimentally, after the p-F substitution, the energy levels are lowered with increased Fermi levels, and the bandgaps of p-F-PEA2PbX4 (X = Cl, Br, I) are slightly reduced. Benefitting from the enhancement of the charge transfer and the reduced trap density by p-F substitution and halogen anion engineering, the average carrier lifetime of the p-F-PEA2PbX4 is obviously reduced. Compared with PEA2PbI4, the X-ray detector based on p-F-PEA2PbI4 perovskite single-crystal has a higher sensitivity of 119.79 μC Gyair-1·cm-2. Moreover, the X-ray detector based on p-F-PEA2PbI4 single crystals exhibits higher radiation stability under high-dose X-ray irradiation, implying long-term operando stability.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2025
·
IF 4.3
Changqing Yuan,Xiaorong Meng,Han Shen,HaoHao Wei
To address the shortcomings of VO 2 (B) when utilized as cathode materials for aqueous zinc ion batteries (AZIB), this study prepared a fluorine and manganese co-doped VO 2 (B) with a nanorod-like structure, formed from convoluted multilayered nanosheets, was synthesized via a solvothermal method. It was established that F and Mn doping effectively broadens the lattice structure and tunneling space of VO 2 (B) and induces lattice distortion of VO 2 (B) through the high electronegativity of F element, leading to the ductile growth of FMVO into a nanorod-like structure made of multilayered ultrathin nanosheets curled. The increased tunneling space and active sites of FMVO, compared to pure VO 2 (B), significantly enhanced the de-embedding rate of Zn 2+ and reduced diffusion resistance. The specific capacity of F 0.06 M 0.02 VO is 523.92 mAh/g (0.2 A/g) with 88.64 % capacity retention after 2,000 cycles (5 A/g). This research provides a novel approach to the development of cathode materials for AZIB.
✓ 已验证
产品关联
DOI
高影响因子
BIOORGANIC CHEMISTRY
·
2020
·
IF 4.831
Shiyang Zhou,Gangliang Huang
In this study, a series of novel 7 H -benzo [ c ] [1,3] dioxolo [4, 5- f ] chromen-7-one derivatives were obtained by structural modification of the lead compounds with Fissitungfine B. A total 15 compounds were designed, synthesized and evaluated as inhibitors of tumor. These target compounds have the novel chemical structures that named three six-membered rings including one lactone six-membered ring. In vitro assay, the results showed that the target compounds have a broad spectrum and strong of anti-tumor activity. Such as the target compound 4n to MCF-7 was IC 50 = 0.35 ± 0.01 μM, to A-549 was IC 50 = 0.37 ± 0.01 μM, to Hela was IC 50 = 0.56 ± 0.02 μM, to MDC-803 was IC 50 = 0.53 ± 0.02 μM and COLO-205 was IC 50 = 0.50 ± 0.02 μM in vitro . At the same time, in vivo anti-tumor activity assay results showed that the target compounds had a good inhibitory effect on tumor growth. Among them, the target compound 4n had the best anti-tumor activity, it could inhibit tumor growth well at a low dose. The target compound 4n could be used as a candidate drug for further research and development, in order to be used as early as application in the clinical treatment of tumors.
✓ 已验证
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2017
·Vol. 41
·期 7
·2793-2799
·
IF 3.269
Guangyin Fan,Xiaojing Li,Yuling Ma,Yun Zhang,Jiangtao Wu,Bin Xu,Ting Sun,Daojiang Gao,Jian Bi
Exploring the applications of two dimensional layered Ti3C2X2 (X = OH, F) is of great importance because of its excellent physical and chemical properties. Herein, we report the synthesis of the bimetallic catalyst PtyCo1−y/Ti3C2X2via a facile one-pot approach using Ti3C2X2 as the support. The in situ synthesized PtyCo1−y/Ti3C2X2 is subsequently applied as a catalyst for hydrogen evolution from the hydrolysis of ammonia borane at 25 °C. Experimental results show that Pt0.08Co0.92/Ti3C2X2 exhibits excellent catalytic activity for the hydrolysis of ammonia borane with a high hydrogen generation rate of 100.7 L H2 (min gPt)−1 and turnover frequency of 727 mol H2 (min molPt)−1 because of the synergistic effect between Pt and Co. Moreover, Pt0.08Co0.92/Ti3C2X2 could be recovered from the reaction mixture by a magnet and recycled at least seven times, thus showing its high recycling efficiency.
✓ 已验证
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2026
·
IF 7.1
Silei Zhang,Qingbo Huang,Xiangmin Kuang,Chaofan Guo,Yongli Jiang,Fujie Zhang,Sakamon Devahastin,Junjie Yi
Oxidative polymerization of catechins drove the green-to-brown color transition. • Electrolyzed water with ultrasound improved drying efficiency and flavor retention. • More extensive cellular disruption contributed to accelerated moisture migration. • Color, aroma, and moisture changes closely reflected quality changes during drying. • Artificial neural network most accurately predicted moisture and catechin contents. Color is critical determinant of market grade and commercial value of star anise ( Illicium verum Hook. f.). However, mechanisms underlying its characteristic green-to-reddish-brown transformation during processing remain insufficiently understood. The present study investigated color evolution of star anise by comparing ultrasound-assisted electrolyzed water treatment (UEWT) with conventional hot-water blanching (HWB) using framework combining drying kinetics, E-nose, LF-NMR, untargeted LC-MS data as well as machine learning modeling. UEWT significantly enhanced drying efficiency, shortening drying time to 8 h compared to 13 h in case of HWB. LF-NMR spectra revealed that UEWT maintained distinct water mobility profiles, effectively reducing internal mass transfer resistance. UEWT also intensified the chromatic transition, as evidenced by a decline in L* , rapid increases in a* and BI, a greater Δ E , an overall decrease in H , and higher late-stage C* values than those observed under HWB. Catechin depletion, accompanied by formation of oligomeric oxidation products, represents key transformation pathway associated with color development. Among the evaluated machine learning models, ANN-based model exhibited superior performance, achieving high prediction accuracy for both moisture content ( R 2 > 0.98) and catechin content ( R 2 > 0.92). These findings provide new insights into physicochemical basis of color formation and offer practical strategy for real-time quality control during industrial drying of aromatic crops. Download: Download high-res image (294KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2025
·
IF 5.1
Qi Hu,Chenhao Xu,Yulong Hua,Cunkang Qi,Jing Zhang,Yuemin Wang,Chengchun Tang
To explore the improvement of microwave absorption performance of boron nitride nanosheets (BNNSs) after doping with graphene quantum dots (GQDs). Herein, a series of point-layer structure BNNSs supported by GQDs composite absorbing materials were designed and prepared. The influence of the substrate on the wave absorption intensity was investigated by loading the same GQDs with BNNSs of different scales. Among them, the BG-1400 with BNNSs-1400 as the substrate and GQDs as the load has the best microwave absorption performance. Its minimum reflection loss ( RL min ) reaches −60.3 dB and the effective absorption frequency band is 8.5 GHz. In order to further analyze the factors influencing the effective absorption frequency bands of BNNSs/GQDs composites, BNG-1400 and BFG-1400 were prepared by loading N-GQDs and F-GQDs respectively on the BNNSs-1400 substrate, and their RL min and effective absorption frequency bands were -57.3 dB, −57.7 dB and 11.3 GHz, 13.4 GHz, respectively. The effective absorption frequency bands of BNG-1400 and BFG-1400 have been significantly improved compared with BG-1400.This indicates that the substrate size of the BNNSs/GQDs composite material can control its absorption intensity, while different doped elements in GQDs can adjust its effective absorption frequency band. This discovery lays the foundation for the research on the controllable adjustment of the wave absorption performance of BNNSs/GQDs composite absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
Food and Bioprocess Technology
·
2015
·Vol. 8
·期 5
·1011-1019
·
IF 2.691
Yang Huqing,Zheng Jianying,Huang Chengqian,Zhao Xiaofei,Chen Huiyun,Sun Zhidong
This study was conducted to investigate the effects of aqueous chlorine dioxide (ClO 2 ) combined with chitosan coating on microbial growth and quality maintenance of fresh-cut bamboo shoots during cold storage. Fresh-cut shoots respiration rate, weight loss, firmness, lignin, colour, microbial and activities of phenylalanine ammonia lyase (PAL), cinnamyl alcohol dehydrogenase (CAD), peroxidase (POD) and polyphenol oxidase (PPO) were measured. The results indicated that treatment with 28 mg L −1 ClO 2 plus chitosan coating inhibited increase in respiration rate and firmness, delayed browning and lignification and reduced microorganism counts of total aerobic bacteria and yeasts and moulds compared to control treatment. The efficiency was better than that of ClO 2 or chitosan treatment alone. Furthermore, combination of ClO 2 and chitosan inhibited the activities of PAL, CAD, POD and PPO throughout the storage period. Our study suggests that ClO 2 plus chitosan coating treatment may be a promising method of maintaining fresh-cut bamboo shoot quality and extending their postharvest life.
研究领域:
采后生理学
·
食品科学
·
园艺科学
·
食品保鲜
✓ 已验证
DOI
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
·
2023
·
IF 4.9
Yuying Bai,Dawei Tian,Zhengxin Ren,Dangyang Yue,Qian Ren,Li Pei,Jun Pan
Though magnetic iron oxide nanoparticles (IONPs) are approved for clinical use as contrast agents for MR imaging in United States and Europe, and are widely used to label cells in research, the relationship between IONPs and mesenchymal stem cells (MSCs) is not fully addressed. Here the effects of consistently appeared γ-Fe 2 O 3 on the lineage commitment of MSCs were studied to optimize applications of IONPs in MSCs upon verification of viability. 30 nm 10 μg/mL induced highest promotions on osteogenesis, while 30 and 50 nm of 100 μg/mL elicited most chondrogensis in 14 days, where the effects on ALP, GAG and SOX9 appeared after 7 days, while on RUNX2 came out after 10 days. γ-Fe 2 O 3 enhanced intracellular and extracellular Fe 3+ and ROS, modulated F-actin and decreased Lamin A of MSCs at different time scale. The disturbances of F-actin, Lamin A or ROS altered the effects of γ-Fe 2 O 3 on MSC differentiation. Our results demonstrate that different size, concentration and modulation of γ-Fe 2 O 3 are needed in its MSC applications for bone and cartilage tissues. Furthermore, an undocumented phenomenon that the modulation of F-actin affected the Lamin A expression in MSCs was observed.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2023
·Vol. 28
·期 14
·5304
·
IF 4.6
Caiyuan Liu,Xin Fang,Hui Peng,Yi Li,Yonggang Yang
The aim of this work is to effectively combine the advantages of polymer and ceramic nanoparticles and improve the comprehensive performance of lithium-ion batteries (LIBs) diaphragm. A flexible film composed of electro-spun P(VDF-HFP) nanofibers covered by a layer of mesoporous silica (P(VDF-HFP)@SiO2) was synthesized via a sol–gel transcription method, then used as a scaffold to absorb organic electrolyte to make gel a electrolyte membrane (P(VDF-HFP)@SiO2-GE) for LIBs. The P(VDF-HFP)@SiO2-GE presents high electrolyte uptake (~1000 wt%), thermal stability (up to ~350 °C), ionic conductivity (~2.6 mS cm−1at room temperature), and excellent compatibility with an active Li metal anode. Meanwhile, F-doping carbon/silica composite nanofibers (F-C@SiO2) were also produced by carbonizing the P(VDF-HFP)@SiO2film under Ar and used to make an electrode. The assembled F-C@SiO2|P(VDF-HFP)@SiO2-GE|Li half-cell showed long-cycle stability and a higher discharge specific capacity (340 mAh g−1) than F-C@SiO2|Celgard 2325|Li half-cell (175 mAh g−1) at a current density of 0.2 A g−1after 300 cycles, indicating a new way for designing and fabricating safer high-performance LIBs.Keywords:composite materials;electro-spun nanofiber;gel electrolyte;carbonaceous anode;lithium-ion batteries
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DYES AND PIGMENTS
·
2021
·
IF 4.889
Haifeng Lu,Lichao Xu,Hua Wang,Shengyu Feng
Fluorescent silicone polymers have attracted much attention owing to their strong fluorescence and high stabilities. However, most of these silicone polymers have suffered from fluorescence quenching caused by aggregation in high concentrations. In this work, 7, 11-diphenyl-8 H - acenaphth[1, 2 - f ] isoindole-8, 10 (9 H ) - dione functionalized polysiloxane (PMDF) with strong blue fluorescence was successfully synthesized via Diels-Alder reaction. Besides high thermal stability, PMDF showed unique aggregation-induced emission enhancement in high concentrations, indicating it is an excellent fluorescent silicone polymer in both disperse and aggregate state. Moreover, the product polymer showed highly sensitive fluorescence response to Fe 3+ , with low detection limit to 0.895 ppm and a high selectivity in the present of other metal ions. This work may open a new window for exploring fluorescent polymers as ideal probe for Fe 3+ .
✓ 已验证
产品关联
DOI
高影响因子
HIGH PERFORMANCE POLYMERS
·
2019
·
IF 1.584
Yinhong Liu,Yuhan Wei,Yongshuang Bian,Shengjiao He,Xin Wang,Xin Liu,Chenglei Li,Qi Wu,Xianyin Zeng,Hanguang Wang,Kuan Liu
Design and synthesis of highly selective fluorine ion probes become particularly important owing to the specific role of fluorine ion in chemical and biomedical progresses. As a new-type of fluorescent material, conjugated polymers with unique photometric properties have been widely researched by scientists in the field of the fluorescence sensors. In this study, the polymer PBTPV-OSi containing benzothiazole moiety is synthesized via palladium-catalyzed Heck coupling reaction. This polymer not only exhibits good solubility in organic solvents but also shows high selectivity for fluorine ion detection in comparison to other anions. Upon addition of F− to PBTPV-OSi solution, Si–O cleavage of PBTPV-OSi leads to the fluorescence quenching of the polymer in tetrahydrofuran dramatically, and the detection limit is 8 × 10−6 mol/L. Moreover, besides detecting fluorine ion from organic phase, the probe can also effectively detect potassium fluoride from inorganic phase. More importantly, a naked-eye detectable chromogenic and fluorogenic dual response to fluorine ion (F−) can be visibly noted and the detection process of fluorine ion is relatively fast.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2024
·
IF 3.5
Xiaohui Wu,Xixi Wang,Yulan Jing,Yuanxun Li,Hua Su
With the emergence of 5G–6G communication technology, the miniaturization and integration of electronic components are crucial. Ba 3 Ti 4 Nb 4 O 21 (BTN) ceramics with hexagonal structures have attracted special attention due to their high dielectric constant, which shows greater application potential in communication base stations and dielectric resonators. However, its high sintering temperature and low-quality factors also greatly limit the application field. In this paper, boric acid (H 3 BO 3 ) as a dopant, was used to investigate the influence on the structure, microstructure, Raman spectrum, and microwave properties for Ba 2.92 Cu 0.08 (Zn 1/3 Nb 2/3 ) 2 Ti 2 Nb 4 O 21 (BCZTN)- x HB (0.25≤ x ≤1.25 wt%) ceramics. The results reflected that H 3 BO 3 was an effective additive, which could promote ceramic densification, accelerate grain growth and uniform distribution, and enhance its microwave performance. Among them, high densification was 93.92 ± 0.35%, and the Q × f value ∼16981 ± 340 GHz at x = 0.75, was more than 2∼3 times higher than other BTN-based ceramics. Superior microwave dielectric properties were achieved for 0.75 wt% H 3 BO 3 -doped BCZTN ceramic sintered at 900°C: ε r ∼42.35 ± 0.48, Q× f ∼16981 ± 340 GHz, and τ f ∼40.02 ± 1.43 ppm/°C. More encouragingly, BCZTN-0.75HB ceramic did not chemically react with Ag, which suggested that it had the potential to be a candidate material for low-temperature co-fired ceramics base station communication devices.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）