文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第5557至5568个,产品总数347,550个

切换升序
JOURNAL OF SEPARATION SCIENCE · 2026 ·Vol. 49 ·期 6 ·e70461 · IF 3.6

Hydrogen-bonded Organic Frameworks Decorated Polymeric High Internal Phase Emulsions as Adsorbents for Solid-Phase Extraction of Estrogens

Jiazhen Wei,Shi Yu,Yuji Ruan,Hao Wang,Menghong Xie,Guihua Ruan,Yipeng Huang

Due to lipid-rich and severe matrix interference, the accurate determination of trace estrogens in cosmetics is highly challenging. Although solid-phase extraction (SPE) is widely used to mitigate the matrix interference, conventional adsorbents are often limited to cosmetic matrices. To this end, polymeric high internal phase emulsions modified with a hydrogen-bonded organic framework (polyHIPEs@HOF) were used as an adsorbent for the SPE of five estrogenic compounds. Benefiting from the hypercrosslinked architecture with interconnected macroporosity of polyHIPEs and hydrophilicity of HOF, the synthesized composites were suitable for SPE of estrogen in a cosmetic sample. Under optimized conditions, polyHIPEs@HOF enabled the rapid extraction of five estrogens from complex cosmetic samples, achieving adsorption equilibrium within 4 min, and the extraction recoveries exceeded 78.28%. The adsorption capacities for estrogens ranged from 8.44 to 15.39 mg g −1 , and the adsorption involved multiple interactions (hydrogen bonding, π-π stacking, and hydrophobic effects). Furthermore, the polyHIPEs@HOF composite was able to eliminate the interference of the complex cosmetic matrix, and the extraction efficiency remained stable over 10 consecutive reuse cycles. These results confirm that the polyHIPEs@HOF composite is a highly efficient and reusable adsorbent for the extraction of estrogens in complex sample matrices.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2026 · IF 3.9

Fabrication of Photonic Crystal Powder Pigments with Bright, Low Angle-Dependent Structure Color and Inherently Robust Mechanical Properties

Mengzhen Liu,Ruikang Sun,Suli Wu

Structural colors have garnered significant attention in the field of coatings due to their environmental friendliness and long-term color durability. This paper reports a facile method for preparing powder-form photonic crystal pigments with robust mechanical properties, which exhibit bright structural colors. Poly(methyl methacrylate-co-butyl acrylate) (P(MMA-BA)) small nanoparticles were employed to co-assemble with Poly(methyl methacrylate) (PMMA) colloidal spheres to form a three-dimensional photonic crystal. During the assembly process, the small particle of P(MMA-BA) fills the interstitial spaces of orderly arranged PMMA microspheres. Upon heating, the P(MMA-BA) particles undergo phase changes, which tightly bind the PMMA microspheres together, significantly enhancing the mechanical stability of the structure and preserving color integrity against external forces. Then the photonic crystal was broken and ground into powders, which display bright and uniform angle-independent color. The resulting powder pigments exhibited an average particle size of 4–5 μm. Compared with photonic crystal films, the powdered photonic crystals offer greater processing flexibility. They can be easily mixed with polymers and form films and 3D object to provide polymers with beautiful colors. The powdered pigments doped polydimethylsiloxane (PDMS) show excellent substrate versatility. These findings highlight their potential for applications in coatings, printing, and decorative materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Digitizing the Filtration Interface: A Smart, Modular Janus Wood Platform for Self-Reporting Oil/Water Remediation

Kaiwen Chen,Cheng Hao,Wenjuan Zhao,Haonan Zhang,Yujing Tan,Fengze Sun,Xuewen Han,Hui Peng,Tianyi Zhan,Jianxiong Lyu,Ning Yan

Efficient and intelligent membranes that can overcome the inherent trade-off between flux and selectivity while providing real-time process monitoring are highly desirable for advanced oil/water separation. This work reported a smart conductive Janus wood membrane (CJW) that integrated high-efficiency oil/water separation with in situ real-time monitoring. A bio-inspired modular design strategy fully exploited wood's natural anisotropy: transverse wood with vertically aligned macrochannels acted as a high-flux transport layer, while longitudinal wood with an inherent micro/nano-capillary network served as a high-precision sieving layer. Asymmetric wettability was established by grafting hydrophilic poly(DMAEMA) on one side and immobilizing hydrophobic fluorosilane-modified nano-SiO 2 on the other side. A continuous GO/PPy conductive network distributed throughout the hierarchical pores enabled in situ electrical sensing during separation. The resulting membrane achieved separation efficiencies > 93.1% over 30 cycles for immiscible oil/water mixtures, with a maximum flux of 8001 L/m 2 ·h. For oil/water emulsions, efficiencies remained > 92.3% after 10 cycles with sustained fluxes of 540-760 L/m 2 ·h. The electrical response of the conductive network provided real-time feedback on membrane status. Additionally, a threshold-based early-warning mechanism using the coefficient of variation (CV) of resistance predicted degradation 3-18 cycles in advance. This work presents a novel paradigm for intelligent separation materials with self-monitoring capabilities.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Lotus-Root-Inspired Moisture-Electric Generators for Wide-Range Humidity-Temperature Energy Harvesting and Self-Powered Motion Sensing

Changqing Yang,Li He,Jiajie Xu,Zhangyu Zhu,Fenghua You,Kun Wang,Wei Wang,Baojiang Liu,Dan Yu,Chunyan Hu

Moisture-Electric Generators (MEGs) are capable of harnessing environmental humidity gradients to drive ion migration and continuously generate electricity, garnering significant attention due to their green and sustainable attributes. The sustained maintenance of moisture gradients and ion transport efficiency are important to their key performance. Inspired by the multi-level porous structure of lotus roots, this research designs and fabricates a self-sustaining MEG with a bilayer heterostructure (GPSC MEG). This device not only achieves directional water delivery and controllable evaporation, but also has abundant negative functional groups inside, which can drive the selective separation of positive charges and form concentration gradients, thereby achieving continuous and stable power generation for over 1200 h in a wide environmental range of 10%–95% relative humidity (RH) and −20°C to 80°C. When under conditions of 25°C and 60% RH, its open-circuit voltage reaches 1.12 V, peak short-circuit current density attains 671.5 µA cm −2 , and stable output power density stands at 22.12 µW cm −2 , surpassing most previous reported MEGs. Furthermore, the output voltage change rate linearly with external pressure, highlighting its potential for self-powered motion sensing. This biomimetic directional channel design provides a simple and scalable strategy for high-performance sustainable energy harvesting.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2026 · IF 5.8

Boosting Alkaline Hydrogen Evolution by Pulse Joule-Heating Activated PtRu Nanoclusters on N-Doped Mesoporous Carbon

Kenan Shen,Yang Qin,Heyong Zhu,Zheming Wang,Zhenshun Mo,Yanan Wang,Zhichuan Zheng,Kai Huang,Xiaotong Zhao,Peng Du

The precise construction of bimetallic sites and the regulation of interfacial environments are crucial for accelerating the sluggish kinetics of alkaline hydrogen evolution. Transient thermochemical processing provides a unique pathway to modulate heterogeneous coordination and metal–support interaction. Herein, we report a pulse Joule-heating (PJH) strategy to activate mixed-valence PtRu nanoclusters on nitrogen-doped mesoporous carbon. The resulting PtRu/NMC-JH exhibits exceptional hydrogen evolution reaction (HER) activity in 1.0 M KOH, delivering an overpotential of only 50.4 mV to reach 100 mA cm–2 and an ultralow Tafel slope of 30.8 mV dec–1, with superior stability exceeding 100 h. Furthermore, the alkaline water electrolysis (AWE) device integrated with this cathode delivers a current density of 0.5 A cm–2 at a cell voltage of 1.59 V with robust stability over 800 h. The remarkable performance enhancement is attributed to the synergy between the subnanometer cluster size and PJH-strengthened electronic coupling, which facilitates efficient charge transfer and accelerates the alkaline HER kinetics. This work highlights the potential of ultrafast thermal activation for designing small-sized clusters and tailoring interfacial chemistry for high-performance energy conversion.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Photothermal Shape-Memory Nanofibrous Membrane for Efficient Recovery of High-Viscosity Crude Oil

Qiong Zuo,Lingyu Zhao,Qingyuan Du,Zengbai Ouyang,Yutong Wang,Dazhi Sun,Jinsong Leng

Efficient recovery of highly viscous crude oil remains a critical challenge due to the poor mobility and slow diffusion of such oils under ambient conditions. Here, a photothermal shape-memory nanofibrous membrane (CB@AUA/SIS) was developed via the electrospinning of aliphatic polyurethane acrylate (AUA) and polystyrene-block-polyisoprene-block-polystyrene (SIS), incorporating carbon black (CB) as a low-cost photothermal filler. The electrospun architecture provides a high surface area and porosity, while the CB endows the membrane with light absorption (reaching 98%) and a high photothermal conversion efficiency of 73.4%. Upon irradiation, the membrane rapidly heats to 61.2 °C, effectively reducing the viscosity of crude oil. Together with the intrinsic lipophilicity of the AUA/SIS copolymer, a high adsorption rate of 6240 g·m–2·min–1 is achieved. In addition, the membrane exhibits excellent hydrophobicity and a light-responsive shape memory effect. This allows the folded structure to autonomously unfold on water surfaces, facilitating its intelligent deployment. Outdoor sunlight tests further confirm its reliable performance. This work demonstrates a multifunctional, light-adaptive system that integrates solar-driven heating and programmable shape transformation for the remediation of viscous crude oil spills.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Nano · 2026 · IF 17.3

Curvature-Selective Antibacterial Potency of Tannic Acid-Armored Black Phosphorus Nanosheets against Multispecies Biofilms and Resistant Systemic Infections

Yuanyuan Xu,Jieyu Zhang,Lei Li,Yuxin Zhang,Siyuan Chen,Wenli Du,Wei Luo,Xinyue Meng,Xuefeng Hu,Yunbing Wang

Antibiotic-resistant infections necessitate strategies independent of biochemical targets. Black phosphorus nanosheets (BPNs) offer biophysical antibacterial mechanisms but suffer from rapid oxidative degradation, reliance on photoactivation, limited biological selectivity, and the absence of benign production methods, hindering clinical translation. Here, we report a green, ethanol-assisted, one-step supramolecular engineering strategy in which tannic acid (TA) simultaneously enhances exfoliation efficiency and stabilizes ultrathin BPNs, yielding TA-BPNs with strong colloidal stability and significantly improved oxidation resistance. Crucially, TA-BPNs exhibit a light-independent antibacterial activity via curvature-selective membrane interactions. TA-BPNs preferentially interact with bacterial membranes bearing negative intrinsic curvature, anchor at the membrane via TA-mediated adhesion, concentrate mechanical stress at nanosheet edges, and induce rapid permeabilization and bacterial death. In contrast, mammalian cell membranes, with near-zero intrinsic curvature, remain largely undisturbed, conferring TA-BPNs’ favorable biocompatibility and selectivity. Molecular dynamics simulations and giant unilamellar vesicle assays corroborate the observed curvature-selective antibacterial action. Moreover, TA-BPNs demonstrated robust efficacy in eradicating ex vivo rabbit dental biofilms comprising multiple species and in curing murine systemic infections caused by norfloxacin-resistant Staphylococcus aureus. Extending this supramolecular design to alternative polyphenols (e.g., epigallocatechin gallate) yielded potent antibacterial analogues, validating the platform as a versatile, generalizable approach for tunable antibacterial activity against antibiotic-resistant infections.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2026 · IF 5.8

Janus-Structured Bilayer Aerogel/PDMS Nanocomposites for Low-Reflection Electromagnetic Interference Shielding

Chunmei Zhang,Taoyan Yang,Yi Wang,Guoliang Li,Liangqiang Wei,Tianliang Zhai

The growing reliance on wireless electronic devices and future mobility has driven demand for electromagnetic interference (EMI) shielding solutions that can both shield and absorb electromagnetic waves, especially at higher frequencies. Drawing inspiration from plant transpiration, Janus-structured bilayer aerogel/polydimethylsiloxane nanocomposites (JAPCs) were successfully prepared via a capillary force-driven strategy, exhibiting low-reflection and efficient EMI shielding performance. Through solvent-evaporation-assisted capillary filling, polydimethylsiloxane (PDMS) was fully infiltrated into the bilayer aerogel containing magnetic and conductive nanomaterials and featuring an ordered asymmetric architecture, which was fabricated through a two-step unidirectional freezing process. A uniformly dispersed hollow Fe3O4 microspheres@graphene oxide (HFO@GO) nanohybrid morphology was observed in the magnetic layer of the JAPC, providing favorable impedance-matching performance. A wirelike and entangled carbon nanotube (CNTs) network was observed in the conductive layer. The tubularly oriented structure of this network enables high EMI shielding efficiency. Strong interfacial bonding between the constituent layers of the bilayer aerogel and the resulting JAPC was confirmed by SEM. The compressive strength of the bilayer aerogels increased significantly, rising from 8.0 kPa for a bilayer aerogel to 2.92 MPa for a JAPC at 40% strain. The shielding effectiveness of reflection (SER) is significantly lower for incident waves approaching from the magnetic layer compared to the conductive layer. However, the total shielding effectiveness (SET) remains nearly invariant regardless of the incident wave direction. The resulting JAPC derived from an ordered bilayer aerogel enables highly effective Ka-band EMI shielding with low reflectivity. It achieves an average SER of 2.17 dB while maintaining a maximum average SET of 59.26 dB. Owing to its unique ordered Janus configuration, an “absorption–reflection–reabsorption” attenuation pathway is established, resulting in high overall effective EMI shielding performance with minimized secondary radiation. This work provides an effective strategy for designing high-performance, low-reflection EMI shielding nanomaterials for next-generation high-frequency electronic applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Foods · 2026 ·Vol. 15 ·期 12 ·2061 · IF 6

Drying-Induced Changes in Metabolite Profiles and Antioxidant Activity of Cordyceps militaris: Insights from Integrated Metabolomics and Network Pharmacology

Xiaodan Wu,Weidi Fu,Wen Zhang,Hao Yu,Jianshuang Zhang

Cordyceps militaris, a medicinal and edible mushroom, is renowned for its bioactive constituents and health-promoting effects. This study investigated the effects of vacuum freeze drying (VF), vacuum drying (VD), oven drying (OV), and sun drying (SU) on the metabolite profiles and antioxidant activities ofC. militaris. VF showed the highest levels of total phenolics, total carotenoids, cordycepin, and N6-(2-hydroxyethyl)-adenosine, whereas VD better preserved total flavonoids. VF- and VD-treated samples also exhibited stronger antioxidant capacities than those processed by OV and SU in 1,1-diphenyl-2-picrylhydrazyl radical (DPPH•), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radical (ABTS•+), hydroxyl radical (•OH), and ferric reducing antioxidant power (FRAP) assays. Metabolomics analysis identified 193 significantly altered metabolites after drying treatments. VF, VD, and SU increased carbohydrates, vitamins, and phenolic acids, while leading to reductions in amino acids, nucleotides, and fatty acids. KEGG analysis revealed that drying significantly affected pathways related to purine and pyrimidine metabolism, amino acid biosynthesis, and phenylpropanoid biosynthesis. Network pharmacology further identified 8 key compounds potentially associated with antioxidant effects through interactions with 37 core targets. These findings highlight the importance of selecting appropriate drying methods to preserve the bioactive compounds and functional quality ofC. militaris.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2026 · IF 7.6

Green Synthesis of Chitooligosaccharides and Lacto-N-Triose II Catalyzed by a Novel Bifunctional β-N-Acetylhexosaminidase from the GH3 Family

Huabiao Miao,Junlong Wu,Menghan Yang,Yuqi Lu,Chunjiao Xie,Sha Wen,Bo Xu,Zunxi Huang,Chengbo Zhang

Human milk oligosaccharides (HMOs) and chitin oligosaccharides possess unique nutritional and prebiotic properties, driving interest in their sustainable synthesis. The key enzyme for their production is β-N-acetylhexosaminidase. Herein, we characterized Nag1420 (accession: PQ041313), a novel GH3 family enzyme from Cellulosilyticum sp., which exhibits both hydrolytic and transglycosylating activities. Substrate specificity analysis revealed a higher activity toward the natural substrate chitobiose than the synthetic analog p-nitrophenyl N-acetyl-β-d-glucosaminide (pNP-GlcNAc), enabling complete hydrolysis to N-acetylglucosamine. Notably, Nag1420 synthesized Lacto-N-triose II (LNT II) via transglycosylation when β-lactose was present as an acceptor. Crucially, in a cascade reaction with Chitinase, Nag1420 directly converted chitin waste into the high-value LNT II. This study provides insights into the green and low-cost biosynthesis of high-value-added carbohydrates.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JACS Au · 2026 · IF 8.5

Layered Double Hydroxide-Stabilized AgI Photocatalyst for Efficient Arene Arylation and Alkylation

Pengfei Han,Eric R. Waclawik,Steven E. Bottle,Qi Xiao,Xuheng Yang,Cheng-an Tao,Jianfang Wang,Huai Yong Zhu

Developing clean and efficient methods for carbon–carbon bond formation remains a central challenge in sustainable chemistry. Here, we report a unified photocatalytic strategy for direct arene arylation and alkylation under visible light. By integrating silver iodide (AgI) nanoparticles with magnesium–aluminum-layered double hydroxide (Mg2Al1-LDH), we achieve efficient cross-coupling of arenes with both aryl and unactivated alkyl iodides under mild conditions and natural sunlight. This system operates without external bases or photoredox cocatalysts and tolerates base-sensitive functional groups, producing only water and iodine as byproducts. Mechanistic studies reveal a synergistic process in which photogenerated electrons reduce halides via an inner-sphere transfer mechanism, while photogenerated holes oxidize surface hydroxyl groups to generate ·OH radicals. These radicals enable hydrogen abstraction and C–H bond activation, completing the coupling process. The availability of surface hydroxyls and oxygen vacancies, along with favorable band alignment between AgI and Mg2Al1-LDH, is critical to catalyst performance. This work demonstrates the first example of a single catalyst system enabling both arylation and alkylation through a unified radical mechanism, offering a sustainable platform for light-driven C–H functionalization and expanding the frontiers of green synthetic chemistry.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Boosting SERS Performance of TiO2 Microspheres via Phytic Acid Modification: Application to Bisphenol A Detection in Consumer Products

Boran Zhang,Qinyi Li,Yun Qin,Li Zhang,Ranran Zhou,Xinling Liu,Yiping Wu,Ying Wen,Haifeng Yang,Xiaoyu Guo

Surface-enhanced Raman scattering (SERS) based on semiconductor substrates offers advantages of low cost and high stability over noble metals, but its practical application is hindered by intrinsically weak signal enhancement. Herein, we report a simple molecular engineering strategy to dramatically boost the SERS performance of TiO2 microspheres through phytic acid (PA) modification. The PA molecules anchor onto TiO2 surfaces via Ti–O–P bonds, forming PA/TiO2 composites in a single-step postsynthesis process. The optimized PA/TiO2 substrate achieves an enhancement factor (EF) of 1.2 × 107─comparable to typical noble metal substrates─and enables detection of the probe molecule 4-mercaptobenzoic acid at concentrations as low as 1 × 10–9 mol/L. Comprehensive mechanistic investigation reveals a synergistic effect: (i) PA-induced coffee-ring aggregation for analyte enrichment, (ii) Mie resonance from the TiO2 microspheres (∼253 nm) for electromagnetic field enhancement, and (iii) charge transfer (CT) resonance at the PA/TiO2 interface for additional chemical contribution, supported by density functional theory calculations and finite-difference time-domain simulations. Leveraging this high-performance platform, we construct an SERS sensor for the endocrine disruptor bisphenol A (BPA), a common contaminant in thermal paper products. The sensor exhibits excellent analytical performance: a limit of detection (LOD) of 4.7 × 10–7 mol/L, a wide linear range from 5.0 × 10–6 to 1.0 × 10–3 mol/L (R2 = 0.9971), and satisfactory spike-recovery results (97.8–103.0%) in real thermal paper samples. This work demonstrates that molecular-level surface engineering offers a scalable and cost-effective route to high-performance semiconductor SERS substrates for environmental monitoring applications.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。