JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2025
·Vol. 36
·期 12
·1-14
·
IF 2.8
Mei Rui,Yan Feng,Hu Sizheng,Gong Zonggui,Guo Haoxuan,Wang Qijing,Zheng Xinghua
With the increasingly urgent safety requirement of lithium-ion batteries, more and more attention has been paid to Li 7 La 3 Zr 2 O 12 (LLZO)-based solid electrolytes with high ion conductivity and excellent electrochemical performance. Unfortunately, owing to the serious “Li-loss” and the abnormal grain growth (AGG) during the long-time high-temperature sintering process, it is difficult to achieve the high-quality LLZO electrolyte with uniform and fine grains, high density and excellent electrochemical performance. In this work, Ga/Mo co-doped LLZO solid-state electrolytes have been prepared by traditional sintering (TS) and two-step sintering (TSS). And the sintering mechanism, phase stability, microstructure evolution, and electrochemical performance have been systematically investigated. A small amount of Ga/Mo doping not only promotes the formation of the cubic garnet LLZO phase, but also enhances the stability of cubic phase. High density of 92.3% and uniform microstructure without AGG have been achieved via a small amount of Ga doping and TSS. Li 6.3 Ga 0.1 La 3 Zr 1.8 Mo 0.2 O 12 electrolytes, prepared by TSS of 1200 °C/15 min-1100 °C/8 h, exhibits high ion conductivity of 2.59 × 10 –4 S·cm −1 and critical current density (CCD) value of 0.5 mA·cm −2 , low electric conductivities of 4.77 × 10 –9 S·cm −1 , which suggests it is a potential electrolyte to apply in all-solid-state batteries.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2025
·
IF 13.1
Zhiwen Liu,Wenqiang Shen,Xiaolong Liang,Jing Liang,Ke Xu,Xu Ge,Jun Lu,Hongsheng Liu,Jingyi Xiao,Liang Wang,Junfeng Gao,Jinxuan Liu
We present a synergistic strategy integrating octahedrally coordinated Mo species as electron buffer and asymmetric site coupling in spinel Co3O4 to achieve acidic oxygen evolution reaction (AOER) activity and durability. The introduced Mo species function as dynamic electron reservoirs, effectively activating and stabilizing tetrahedral Co sites while enabling synergistic electronic coupling between tetrahedral and octahedral sites. This dual-regulation mechanism successfully suppresses cobalt overoxidation and subsequent ion dissolution by maintaining optimal charge redistribution. Furthermore, the asymmetric electronic coupling induced by Mo adjacent to both tetrahedral and octahedral sites facilitates the direct coupling of *O–*O radicals, accelerating oxygen molecule formation. The optimized Mo–Co3O4 NNAs demonstrate remarkable performance metrics: a low overpotential of 310 mV at 10 mA cm–2, exceptional stability over 200 h in 0.5 M H2SO4, and minimal degradation rate (0.09 mV h–1). These achievements position it among the most competitive acid-stable non-precious-metal-based AOER catalysts reported to date. This work establishes fundamental guidelines for designing robust nonprecious electrocatalysts in acidic media and proposes fresh perspectives for implementing oxide path mechanism (OPM) paradigms in advanced AOER.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2025
·
IF 7.7
Jiaqi Yang,Yu Yang,Kexuan Gao,Nigel J.D. Graham,Li-an Hou
Regulation of the types and content of reactive oxygen species (ROS) in advanced oxidation processes (AOPs) is regarded as a challenging task. Herein, the features of sulfur-vacancy (Sv) and nitrogen-vacancy (Nv), and cobalt (Co)/molybdenum (Mo)-bimetallic constituents were simultaneously incorporated into a novel Co-N@MoS 2 -COOH catalyst through a simple hydrothermal calcination method. The adsorption of oxygen (O 2 ) and peroxymonosulfate (PMS) was promoted by Sv/Nv, whereby the generation of superoxide radical (O 2 · - ) and singlet oxygen ( 1 O 2 ) species was induced, and the energy barrier for the formation of high-valent cobalt-oxo species (Co(IV)=O) was reduced. The decomposition of PMS was enhanced by a bimetal (Mo/Co) electronic pump and the O 2 · - , 1 O 2 , and Co(IV)=O active species degraded tetracycline (TC) together to achieve an efficient degradation rate (initial K obs = 0.490 min -1 ). The degradation intermediates and potential degradation pathways were identified, and the leaching of Co was within the acceptable range of environmental standards. Incorporation of the catalyst into a microfilter membrane achieved a 100% degradation of TC at an ultra-high membrane flux (1803.4 LMH/bar). This study provided new insights into the types of ROS regulated by bi-vacancy and bimetallic catalysts in AOP systems, with the intention of promoting a more sustainable and resource-efficient treatment technology.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry B
·
2019
·Vol. 7
·期 44
·7042-7051
·
IF 5.047
Lianjing Zhao,Zepei Wu,Guannan Liu,Huiying Lu,Yuan Gao,Fangmeng Liu,Chenguang Wang,Jiuwei Cui,Geyu Lu
Nanozymes have drawn considerable attention because of their lower cost, higher stability and convenient preparation compared to protein enzymes. In the present work, Mo, S co-doped carbon quantum dots (Mo-CQDs) as a peroxidase mimic were used to fabricate a cascade colorimetric biosensor to detect cholesterol. The Mo-CQDs possess a robust peroxidase-like activity, and they can easily catalyze 3,3,5,5-tetramethylbenzidine (TMB) to produce an oxidized TMB in the presence of H2O2. The Mo, S doping in the carbon quantum dots (CQDs) notably boosts the yield of CQDs and may facilitate the electron transfer between TMB and H2O2, which further enhances the catalytic activity of CQDs. The colorimetric biosensor based on Mo-CQDs and cholesterol oxidase exhibited excellent selectivity and high sensitivity for cholesterol in the range of 0.01–1.0 mM along with a detection limit as low as 7 μM. The total cholesterol concentration in the serum sample was measured with satisfactory results and read out by the naked eye, indicating the potential application in clinical diagnosis and portable test kits.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2022
·
IF 4.326
Xiaoxian Li,Yuanzhe Gong,Qi Lu,Min Lin,Jian Liu,Yulong Wu
In this work, the hierarchical pore HZSM-5 zeolite was synthesized by the method of alkali treatment, and the bimetallic loading of Mo and Cu was investigated for the hydrothermal aromatization of stearic acid. After alkali treatment, the pore size of HZSM-5 increased, but the acid sites decreased. The metal loading reintroduced the Lewis acid sites, greatly increasing the ratio to Brönsted acid sites. Therefore, the treated catalyst achieved higher hydrothermal stability while maintaining the high activity of hydrothermal aromatization of stearic acid. Mo0.02Cu0.01/Z-0.2M achieved excellent activity in the stearic acid hydrothermal aromatization with a high overall TEX (toluene, ethylbenzene, and xylenes) yield of 50.19 wt %, including 10.30 wt % toluene, 3.82 wt % ethylbenzene, and 36.07 wt % xylene. In addition, Mo0.02Cu0.01/Z-0.2M still showed excellent catalytic activity while applied in the system of the simulated microalgal bio-oil. As the reactant changed to the mixture of stearic acid and hexadecanamide, an overall TEX yield of 34.11 wt % was obtained at 450 °C. These results demonstrate the excellent hydrothermal aromatization ability of the MoCu-supported hierarchical pore ZSM-5 zeolite, which provides the potential to produce value-added chemicals from algal biomass.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Guanyu Qiao,Taotao Ai,Weiwei Bao,Jie Han,Zhifeng Deng,Peng Jiang,Xueling Wei,Xiangyu Zou
The global energy transition driving an urgent need for sustainable renewable energy technologies. Hydrogen’s role as a clean, high-efficiency energy vector stems from its ability to store large amounts of energy without generating carbon emissions, relies on water electrolysis technology for its efficient production. However, commercial noble metal catalysts (IrO 2 and RuO 2 ) have drawbacks such as high cost and poor stability, limiting their large-scale application. To address this, this study developed a hierarchical CoMoO 4 @CoFe-LDH heterostructure catalyst aimed at simultaneously optimizing oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance to achieve efficient overall water splitting. A core–shell structure was constructed through a dual-stage synthesis procedure (hydrothermal growth of CoMoO 4 nanorod arrays followed by electrodeposition of CoFe-LDH nanosheets). In situ analysis revealed that Mo species dissolution during the OER process induces surface reconstruction, generating highly active Co(Fe)OOH species, significantly lowering the reaction energy barrier. Experimental results showed that the catalyst exhibited outstanding OER activity and HER activity. Additionally, the catalyst exhibits outstanding stability (OER continuous operation for 50 h without degradation) and achieves efficient Overall Water Splitting Performance (starting voltage 1.52 V at 10 mA/cm 2 ). Density functional theory (DFT) calculations further confirm the optimized electronic structure at the heterointerface.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Kai Wei,Jiasheng Zhu,Lufang Fan,Weijie Zhang,Huarui Han,Changchang Ma,Kan Hu,Sheng Feng
Here, we constructed S-scheme CdIn 2 S 4 /MoO 3-x (CISMO) photothermal catalyst with interface Mo-S bond for efficient overall water splitting. As expected, hydrogen (H 2 ) and oxygen (O 2 ) evolution rates of the optimized CISMO reached 554.71 and 277.88 μmol·g −1 ·h −1 , respectively, far higher than that of CdIn 2 S 4 (71.78 and 34.45 μmol·g −1 ·h −1 ) and MoO 3-x (0 and 21.83 μmol·g −1 ·h −1 ). Mechanism analysis revealed that the photogenerated carrier transfer followed an S-scheme route. More importantly, the photocatalytic performance of CdIn 2 S 4 /MoO 3-x was highly relevant with the oxygen vacancies (Ovs) in pristine MoO 3-x . In S-rich environment, the Ovs could be imbedded by sulfur (S) for the formation of interface Mo-S bond during CISMO fabrication. Interface Mo-S bridge facilitated the photogenerated carriers transfer between CdIn 2 S 4 and MoO 3-x . Moreover, the metal-free localized surface plasmon resonance effect, originating from the residual Ovs in CdIn 2 S 4 /MoO 3-x , could further enhance the water splitting performance through photothermal conversion. This work shed light on controllable interface chemical bond formation in heterojunction photocatalysts to signally promote the photocatalytic performance.
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2022
·Vol. 147
·期 7
·1385-1393
·
IF 5.227
Dongzhen Chen,Yang Li,Lijun Wang,Yingjie Wang,Pan Ning,Powan Shum,Xinhai He,Tao Fu
Biological surface-enhanced Raman scattering (SERS) sensing is dependent on the properties of the sensing surface. For the biological sensing surfaces for SERS, the hydrophilicity, biocompatibility and signal sensitivity are pivotal. Hence, a hard bimetallic Mo–Ag film was developed by a magnetron sputtering technique, and the surface morphology could be controlled by the relative contents of Mo and Ag. The Mo–Ag film has better hydrophilicity than the pure Ag film, which could be beneficial for cell attachment during biological SERS sensing. Moreover, the cell test shows that the Mo–Ag film exhibits good cytocompatibility with MC3T3-E1 cells, which shows potential for SERS detection in vivo. The high surface roughness of the Mo–Ag film is a fascinating feature for enhancing Raman scattering signals. Through depositing a thin film of Mo–Ag on a glass surface with a size of 0.5 × 0.5 cm2, a sensing chip of SERS could be produced. High sensitivity and excellent signal reproducibility were acquired. The sensitivity was down to 10−10 mol L−1 for malachite green and 10−9 mol L−1 for thiram, and the relative standard deviation value was lower than 7.0%. Moreover, bacteria were detected by employing the Mo–Ag film chip, and the difference in signal uniformity between molecules and bacteria is illustrated. In summary, depositing the Mo–Ag film on the surface of sensors could be an effective strategy for biomedical SERS sensing.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2022
·Vol. 12
·期 21
·6384-6397
·
IF 6.177
Zhi Zhu,Reeti Kumar,Liwen Luo,Sunita Varjani,Pengwei Huo,Jonathan Woon-Chung Wong,Jun Zhao
Photocatalytic degradation of pharmaceuticals in the aquatic environment is considered a promising strategy to address water pollution. In this study, a novel photocatalyst was constructed by decorating g-C3N4 (CN) with α-MoC1−x quantum dots (α-MoC1−x-QDs) through a facile calcination method. The catalyst showed enhanced tetracycline (TC) degradation performance under visible light. The unique Mo–N surface bonding states and quantum effect leading to superior TC degradation activity (89.1%) compared to pure CN (21.8%) were reported and revealed. More importantly, the mechanism for the significant enhancement of photocatalytic activity of the catalyst was investigated by DFT (density functional theory) calculations and photo-electrochemistry measurements. The results confirmed that the effect of α-MoC1−x-QDs on CN improved the light absorption capacity obviously, and the Mo–N surface bonding states accelerated the charge migration from CN to α-MoC1−x-QDs. Moreover, the TC degradation pathway, intermediates and photogenerated carrier transfer behaviors were also discussed in depth. This research provides a new strategy for the construction of noble-metal-free co-catalyst/semiconductor composite materials in the photocatalytic degradation of antibiotics.
✓ 已验证
DOI
高影响因子
CATALYSIS COMMUNICATIONS
·
2018
·
IF 3.463
Xiaoqiang Gao,Fang Zhang,Yi Yu,Yonghui Dou,Li Xu,Guoji Liu
Mo-modified V 2 O 5 /TiO 2 catalysts were prepared by wetness impregnation method and investigated for the selective oxidation of 2-methylnaphthalene to 2-naphthaldehyde. The catalysts were characterized by XRD, BET, XPS, and Raman to investigate the promotional effect of Mo on catalyst structure, surface property, and catalytic performance. The introduction of molybdenum decreases the amount of KVO 3 phase and enhances the dispersion of the vanadium phase. XPS and Raman results indicate that Mo prevents Sn and K to interact with V species and bonds with Ti or V through bridge oxygen. V1Mo1 sample demonstrates a remarkable improvement in conversion and selectivity compared with others.
✓ 已验证
DOI
高影响因子
TALANTA
·
2024
·
IF 5.6
Yukun Xing,Chengkai Lv,Yue Fu,Lan Luo,Jixiang Liu,Xiaoyu Xie,Fangfang Chen
Abnormal levels of dopamine (DA) and uric acid (UA) in the human body are valuable indicators for monitoring human health, as they are associated with certain diseases. Therefore, it is crucial to develop sensitive and simultaneous analytical techniques for DA and UA in diagnosing the related diseases. Herein, the Co- and Mo- doped carbon nanofibers (Co, Mo@CNFs) electrochemical biosensor was developed successfully for the sensitive and accurate simultaneous detection of DA and UA. A straightforward electrospinning technique followed by a carbonization process was employed for the synthesis of Co, Mo@CNFs, and the encapsulation of Co and Mo within CNFs served to not only prevent nanoparticle agglomeration, thus providing more active sites, but also to facilitate rapid electron transfer . By incorporating Co and Mo into CNFs, the electrocatalytic activity of the modified electrode was greatly improved due to the beneficial conductivity and synergistic effects of transition metals . This enhancement effectively addressed issues such as the overlapping anodic peaks that occur when DA and UA are oxidized concurrently. Due to the mentioned synergistic contributions, the modified Co, Mo@CNFs electrode (Co, Mo@CNFs/GCE) achieved remarkable sensitivity for the simultaneous detection of DA and UA, while also exhibiting strong anti-interference ability. The detection limits for DA and UA were 2.35 nmol L −1 and 0.16 μmol L −1 , respectively. We applied the developed Co, Mo@CNFs/GCE electrochemical biosensor to detect DA and UA in 50-fold diluted serum and urine samples. The results affirm the biosensor's reliability and precision. Moreover, the developed Co, Mo@CNFs/GCE biosensor demonstrated excellent performance in simultaneously detecting DA and UA, providing an efficient and dependable detection approach for clinical diagnosis and bioanalysis .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MINERALS ENGINEERING
·
2024
·
IF 4.9
Guihong Han,Aohua Li,Yizhuang Wang,Hu Sun,Yanfang Huang,Bingbing Liu
The mining of strategic U-Mo deposits invariably leads to the generation of wastewater with significant risks of radioactive and heavy metal pollution. This study explores a novel process for the simultaneous precipitation-adsorption of U and Mo from mine drainage, with subsequent solidification of the radioactive Fe(OH) 3 sediments using tailings. The results demonstrate that, under specific conditions, such as 33.6 mg/L Fe 3+ and pH 6.0–7.0, more than 97 % of U and Mo can be efficiently co-removed, and the treated water exhibits a gross α radioactivity of less than 0.2 Bq/L. The U-bearing Fe(OH) 3 sediments are transformed into general solid wastes, exhibiting low α radioactivity of less than 1.0 Bq/kg for 238 U, 232 Th or 226 Ra, after being blended with tailings in a mass ratio of 1:50. The reaction, adsorption and solidification mechanisms are further elucidated. The U and Mo are primarily precipitated and adsorbed in the forms of UO 2 (OH) 2 and Fe 2 (MoO 4 ) 3 respectively. The U-bearing Fe(OH) 3 particles are firmly encapsulated by negatively charged particles of phlogopite, quartz, and orthoclase, and agglomerate into large particles within the solidification product, thereby reducing U dissolution in simulated acid rain. Ultimately, a sustainable treatment flowsheet is established for the management of U-Mo ore mine drainage and tailings.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）