Advanced Composites and Hybrid Materials
·
2026
·
IF 15.5
Yang Deyu,Fan Xinyu,Li Jingtong,Lin Yunzhou,Tian Xiaoyan,Fei Jie,Wu Daheng,Li Hejun,Hou Xianghui
Ice accretion poses significant challenges across modern industries, driving the demand for passive icephobic surfaces that combine zero energy consumption with operational reliability. However, existing icephobic materials often fail to achieve a practical balance between low ice adhesion, mechanical robustness, and long-term durability. Based on the proposed synergistic design strategy for multi-scale interfacial stress manipulation and mitigating performance degradation, this study has developed multi-scale icephobic composites (MIC) by incorporating functionalised nanoparticles, oil-swelled elastic polymers, and microporous fibrous frameworks, effectively addressing the performance trade-offs encountered in conventional approaches. The microporous fibrous framework enhances tensile strength by a factor of 32 compared to traditional slippery icephobic polymers. Through hybrid effects of nanoparticles and the microporous structure, interfacial stress distribution is manipulated across both micro- and nanoscale levels, maintaining ice adhesion strength below 4.3 kPa while resolving the inherent conflict between icephobicity and mechanical strength. Molecular-level investigation, combined with systematic experiments and density functional theory (DFT) calculations, verifies improved durability arising from the multi-scale depletion-inhibition mechanism, which consists of molecular interpenetration/adsorption among hydrophobic/oleophilic groups, nanoparticles, oil molecules, and polymer chains, alongside suppressed deformation of the microporous framework. This study presents a feasible design strategy for high-performance icephobic materials, offering valuable insights for practical applications and advancing the fundamental understanding of ice/solid interfaces.
✓ 已验证
DOI
高影响因子
RARE METALS
·
2026
·Vol. 45
·期 5
·e70300
·
IF 12.1
Hui Liu,Hongli Jia,Xiaojin Yan,Rouling Chen,Yingying Wang,Kun Chen
en This link goes to a English section zh This link goes to a Chinese section Thermo-responsive hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) are promising candidates for soft actuation, yet their practical applications are often constrained by sluggish thermo-responsive kinetics and insufficient mechanical robustness. Herein, phosphotungstic acid (PTA), a tungsten-containing polyoxometalate, was incorporated to regulate the phase transition behavior and modulate a PNIPAM/P(AA- co -AM) bilayer hydrogel, in which the thermo-responsive PNIPAM layer serves as the actuator whereas the non-thermo-responsive P(AA- co -AM) layer provides mechanical support. By increasing the PTA content up to 4 wt%, the thermally induced deformation time of the PNIPAM layer was prolonged from 30 to 120 s, whereas the recovery time at low temperature was shortened from 120 to 60 min, thereby enabling programmable thermo-responsive kinetics. The thermal transition of the PTA-PNIPAM layer was effectively regulated by PTA, with the lower critical solution temperature (LCST) gradually increasing and tunable up to 42°C, accompanied by an improved thermal stability manifested by reduced mass loss at 150°C. Mechanical characterization demonstrated that the P(AA- co -AM) layer modulated the tensile properties of hydrogel networks, and the bilayer configuration significantly outperformed the pristine PNIPAM hydrogel. Benefiting from the synergistic effects of kinetic regulation and mechanical modulation, the bilayer hydrogel further exhibited multi-substrate adhesion and reversible deformation, enabling an underwater gripping demonstration. This work highlights a polyoxometalate-enabled strategy for simultaneously controlling thermo-responsive kinetics and toughening PNIPAM-based hydrogels, thereby advancing functional soft materials for actuation-related applications. 摘要 en This link goes to a English section zh This link goes to a Chinese section 聚(N-异丙基丙烯酰胺)(PNIPAM)的温敏水凝胶是软体动力领域的有力候选材料,但其迟缓的热响应动力学和有限的机械鲁棒性往往限制了其实际应用。在此,我们在PNIPAM/P(AA- co -AM)双层水凝胶中引入了磷钨酸(PTA),以调控其相变行为并增强材料性能。在该双层结构中,温敏性PNIPAM层作为动力层,而非温敏性P(AA- co -AM)层则提供机械支撑。通过将PTA的含量提高至4 wt%,PNIPAM层的热诱导变形时间从30秒延长至120秒,而在低温下的恢复时间则从120分钟缩短至60分钟,从而实现了可编程的热响应动力学。PTA有效调控了PTA-PNIPAM层的热转变行为,使其低临界溶解温度(LCST)逐渐升高且最高可调至42°C。同时,材料的热稳定性也得到提升,150°C时的质量损失明显减少。力学表征表明,P(AA- co -AM)层调节了水凝胶网络的拉伸性能,且该双层结构的性能显著优于原始PNIPAM水凝胶。得益于动力学调控与机械增韧的协同效应,该双层水凝胶进一步展现出多基底黏附性和可逆变形能力,并成功实现了水下抓取演示。本工作提出了一种基于多金属氧酸盐的水凝胶改性策略,可同时控制PNIPAM基水凝胶的热响应动力学并增强其韧性,从而推动了功能性软材料在相关应用中的发展。
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Tiwen Xu,Ruijie Ren,Junjie He,Fei Yan,Shuxin Guan,Shuyan Jiang,Junye Huang,Jingshui Xu,Ying Yang,Kaiyang Huang
Silica-hybridized carbon black (CB-SiO 2 ) shows a promising eco-friendly filler for tread rubber, combining the advantages of both potentially. Here, in situ hydrolyzed nano-SiO 2 anchored on CB particles was prepared by varying the tetraethyl orthosilicate (TEOS) dosage, and its effect on the properties of natural rubber (NR) composites was studied. Results demonstrated the existence of hydrogen bond between CB and SiO 2 , and increasing the anchored SiO 2 delayed curing, yet enhanced tensile strength by 35.6% and lowered rolling resistance (tan δ @60°C) by 22.7% while maintaining wear resistance (8 mL TEOS/10 g CB, no coupling agent). The improvement is attributed to the hybrid's higher specific surface area, favorable particle-size distribution, and surface protrusions, which strengthen rubber-filler interaction despite the reduced dispersive free energy ( γ s d $$ {\gamma}_s^d $$ ). This work presents a green and sustainable strategy for designing high-performance CB in its production process.
✓ 已验证
DOI
高影响因子
Gels
·
2026
·Vol. 12
·期 5
·411
·
IF 6.4
Hanyin Li,Yi Meng,Luohui Wang,Yan Gao,Youming Dong,Liangdi Zhang,Fei Xiao,Hanmin Wang,Cheng Li
Biomass represents a vital and sustainable resource for developing renewable materials with the potential to replace petroleum-based chemicals. Paulownia wood has high cellulose content and a loose wood structure, giving it natural advantages as a biomass material. Therefore, in this study, Paulownia wood was selected as a lignocellulosic feedstock. An integrated pretreatment process combining a deep eutectic solvent (DES) with an organic solvent was employed to efficiently remove lignin and hemicellulose, yielding cellulose-enriched residues. Subsequently, high-intensity ultrasonication was applied to convert the residues into cellulose nanofibers and nanocrystals. Using the extracted cellulose and nanocellulose, a dual-crosslinked network composite hydrogel was fabricated. The structural, mechanical, thermal, swelling, and conductive properties of the hydrogel were systematically investigated. The results show that, compared with the blank group hydrogel, the addition of nanocellulose increased the maximum tensile strength and tensile strain of the composite hydrogel by approximately 113% and 81%, respectively; meanwhile, the compressive strengths of the nanocellulose-based hydrogels (0.04575–0.09060 MPa) are higher than that of the blank group hydrogel (0.04235 MPa), confirming that the incorporation of nanocellulose significantly enhances the mechanical strength and elasticity of the hydrogel. The introduction of an AlCl3/ZnCl2solvent system imparts appreciable electrical conductivity. Furthermore, the composite hydrogel maintains structural integrity after full swelling, indicating good dimensional stability and reusability. This work not only presents a green and efficient strategy for valorizing Paulownia biomass but also offers a novel design route for high-performance conductive hydrogel materials, highlighting their potential application in areas such as flexible electronics and energy storage.
✓ 已验证
DOI
PubMed
高影响因子
Materials
·
2026
·Vol. 19
·期 10
·1954
·
IF 3.7
Jialeen Sairike,Kamale Tuokedaerhan,Serikbek Sailanbek,Zhengang Cai,Haotian Yang
HighlightsSystematic elucidation of annealing-temperature-dependent evolution of oxygen vacancies, M–O network densification, and crystallisation behaviour in sol–gel HfO2, directly correlating with TFT electrical performance and band alignment.All-solution-processed HfO2high-K gate insulator and IZO active layer are achieved via the sol–gel method, eliminating expensive vacuum equipment.The optimised 85 nm HfO2insulator annealed at 400 °C delivers outstanding device metrics (Ion/off= 1.11 × 106, SS = 0.53 V/dec, Vth = −1.1 V), proving that solution-derived HfO2is a viable and scalable alternative to conventional SiO2for TFT miniaturisation without performance trade-off.With the continuous advancement of display technology and advanced integrated circuits, oxide thin-film transistors (TFTs) have become core devices due to their high mobility, low leakage current and excellent large-area uniformity. To achieve low power consumption, high performance and high reliability, the introduction of high-k gate insulating layers is crucial. Among the numerous high-k materials, hafnium oxide (HfO2) has attracted significant attention due to its excellent dielectric properties and good compatibility with CMOS processes. In this paper, uniform and dense HfO2films were successfully fabricated using the sol–gel method to serve as insulating layers for TFT devices. Through experimental analysis, 400 °C was determined to be the optimal annealing temperature. At this temperature, the effects of replacing SiO2with HfO2as the insulating layer, as well as the impact of reducing film thickness, on TFT devices were investigated. Ultimately, at an annealing temperature of 400 °C, an 85 nm-thick HfO2film achieved the highest on/off current ratio (Ion/off= 1.11 × 106), the lowest subthreshold swing (SS = 0.53 V/dec), the lowest threshold voltage (Vth = −1.1 V) and the lowest off-current ratio (Ioff= 2.5 × 10−12A). It was confirmed that replacing SiO2with HfO2as the insulating layer is a viable approach for reducing the volume of TFT devices.
✓ 已验证
DOI
PubMed
高影响因子
Materials
·
2026
·Vol. 19
·期 10
·1943
·
IF 3.7
Ruoming Du,Aihua Yao
HighlightsWhat are the main findings?WO3·2H2O films exhibit pronounced pH-dependent electrochromism in aqueous electrolytes.Lower-pH LiCl provides the best overall electrochromic performance in the Li+system.ZnCl2shows stronger pH-dependent kinetic limitations than LiCl.What are the implications of the main findings?The pH effect in hydrated WO3depends strongly on the cation involved.Multivalent-ion systems are more sensitive to electrolyte-controlled transport and interfacial conditions.pH control offers a practical route to improving aqueous WO3-based electrochromic systems.Aqueous electrochromic systems based on tungsten oxide (WO3) have attracted increasing attention because of their high ionic conductivity, low cost, and improved safety compared with organic systems. However, the role of electrolyte pH in regulating the electrochromic behavior of hydrated WO3films remains insufficiently understood, particularly across cation systems with different valences. In this work, amorphous WO3·2H2O films were electrodeposited on ITO substrates and systematically evaluated in LiCl and ZnCl2aqueous electrolytes with different pH values, with acidic AlCl3used as a supplementary trivalent system. The results reveal pronounced pH-dependent electrochromic behavior in both the monovalent and divalent systems. In LiCl, acidic conditions, especially pH 2.0, gave the best overall performance, including high optical modulation and improved cycling stability, while the dominant pseudocapacitive charge-storage behavior was largely preserved. In ZnCl2, films tested at pH 1.5–2.0 showed significantly better electrochromic performance than those at higher pH values, indicating a much stronger kinetic sensitivity to pH. Combined experimental and first-principles results show that electrolyte pH influences not only proton availability, but also the cation-dependent interfacial charge-compensation environment in hydrated WO3films.
✓ 已验证
DOI
PubMed
高影响因子
SENSORS
·
2026
·Vol. 26
·期 10
·2967
·
IF 4
Wenyu Xu,Yuanfu Zhang,Yaqi Liu,Lekai Li,Xianfeng Shao,Xinzhi Li,Xueru Chen,Xianxi Zhang
Mercury ion, a highly toxic and bioaccumulative heavy metal pollutant, poses significant risks to human health and ecosystems even at trace concentrations. Therefore, the development of highly sensitive and selective analytical methods for mercury ions is critically important to safeguard environmental integrity and human health. In this work, 4-mercaptopyridine-functionalized gold nanoparticles (4-MPY-AuNPs) were synthesized and subsequently immobilized onto quartz slides to fabricate a localized surface plasmon resonance (LSPR) sensor. Exploiting the selective coordination interaction between the pyridyl nitrogen atoms of 4-MPY and Hg2+, this LSPR sensor enables highly specific detection of Hg2+. Moreover, injecting a trace amount of 4-mercaptopyridine-functionalized AuNPs into the flow cell triggers the in situ formation of a surface-confined AuNP–Hg2+–AuNP sandwich architecture, thereby enhancing the sensor’s sensitivity. Under the optimized conditions, the proposed method exhibited a linear dynamic range of 1 × 10−9–6 × 10−7mol L−1, with a correlation coefficient (R2) of 0.9917 and a limit of detection (LOD) of 3.2 × 10−10mol L−1; the LOD of this method is one order of magnitude lower than the LODs reported in contemporary Hg2+detection methods. This method exhibits high selectivity, sensitivity, cost-effectiveness, and is label-free, thereby demonstrating significant potential for environmental applications.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Zhenyong Cen,Zuohan Li,Yuwei Lu,Changrong Zhou,Nengneng Luo,Xiaoming Shi,Xin Zhang,Kezhen Hui,Zhongshang Dou,Ze Xu
Fabricating potassium sodium niobate (KNN)-based materials that simultaneously exhibit high electro-strain and high bipolar strain symmetry at reduced sintering temperatures (Tsinter) is challenging. This study demonstrates that the synergistic effect of Ti ion doping and a reducing atmosphere significantly enhances lattice activity, thereby lowering Tsinter by nearly 160 °C. Reducing Tsinter is more effective than B-site Ti substitution in suppressing oxygen vacancy concentration, which consequently diminishes the defect polarization (PD) and weakens the internal bias field (Ei). Furthermore, the 3% Ti dopant promotes the formation of small-sized nanodomains via constructing an R/O/T multiphase coexistence. This strategy synergistically tailors both defect and multiphase engineering, resulting in nanodomains and a weak PD. The combined effect of these features flattens and symmetrizes the Landau energy profile, yielding a high electro-strain coefficient (d33* = 554 pm/V) and a superior bipolar strain symmetry (β = 0.61%). The developed KNN-based materials show great potential for cofiring with low-cost internal electrodes, enabling the production of economical multilayer devices with a large electro-strain.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Xinyu Fu,Xiaofeng Song,Zheji Deng,Jian Lu,Yueyue Chen,Yunnian Guo
Intelligent response hydrogels, such as those sensitive to pH and strain, have been applied in biomedical and health fields. However, how to set up a bridge between pH and strain responsiveness to develop one product with versatility in a wide concept of health is attracting great interest. In this work, a pH-responsive hydrogel was synthesized via free-radical polymerization of acrylic acid (AA), hydroxyethyl methacrylate (HEMA), and sodium styrenesulfonate (SSS) in poly(vinyl alcohol) (PVA) solution. The AA component provided pH-responsiveness, HEMA part formed microhydrophobic domains that balanced swelling and enhanced the mechanical properties of networks based on PVA, while SSS segment served as a conductive dopant to achieve sensing capability. The optimal hydrogel exhibited good mechanical properties, including an elongation at breakage of 810%, tensile strength of 0.31 MPa, toughness of 1.48 MJ/m3, Young’s modulus of 0.03 MPa, and stable cyclic tensile behavior. The hydrogel showed distinct pH-dependent swelling characteristics and functioned as a drug-loaded vehicle to control drug release. The release process conformed to Fick diffusion. Meanwhile, the pH-responsive hydrogel could detect continuous variations in strain levels with a gauge factor (GF) of 7.12 and response and recovery times of 0.26 s and 0.28 s, respectively. After loading the drug, it was also integrated into a sensor to monitor various joint movements well, exhibiting satisfactory biocompatibility. In the big health industry, this multifunctional hydrogel can facilitate healthy living by detecting limb movements and protect joint health through transdermal drug delivery.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·
IF 5.8
Shijian Zhang,Xiuxiu Huang,Wenbin Ruan,Xiang Li,Shuangshuang Huai,Kai Chen,Ge Ge,Hao Zhang,Jie Li,Yaner Ruan,Xiufang Wang
The S-scheme heterojunction has been recognized as an effective strategy to boost photocatalytic hydrogen evolution performance. However, the insufficient separation and transfer of photogenerated carriers still is a critical bottleneck that limits further activity improvement. Here, we rationally constructed defect-rich nanostructured Sv-ZnIn2S4/CdS (Sv-ZIS/CdS) S-scheme heterojunctions by introducing sulfur vacancies (Sv) into ZnIn2S4 and systematically explored the role of S vacancy defects in the regulation of interfacial charge dynamics. Experimental results demonstrate that the synergistic combination of S-scheme heterojunction and Sv effectively extends visible-light absorption and accelerates charge separation. Specifically, sulfur vacancies enhance the built-in internal electric field (IEF) within the heterostructures, thereby driving the spatial separation and directional migration of photogenerated carriers. Density functional theory (DFT) calculation further reveals that Sv-induced charge redistribution reduces the surface kinetic barrier, facilitating the adsorption and activation of H2O and H* intermediates and thus boosting the hydrogen evolution reaction. Benefiting from these synergistic effects, the optimized Sv-ZIS/CdS photocatalyst exhibits a remarkable hydrogen evolution rate (3.852 mmol g–1 h–1). This work provides profound insights into the manipulation of heterojunction interfacial charge behavior via defect engineering, offering a feasible paradigm for designing high-performance nanostructured photocatalysts for solar-to-hydrogen conversion.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·
IF 5.8
Limei Shi,Zihan Shu,Miao Li,Wenyan Zhou,Ke Li,Zhiyan Feng,Hou Wang
The development of efficient catalysts for peroxymonosulfate (PMS) activation, particularly at ultralow oxidant concentrations, remains a critical challenge for sustainable water treatment. Here, we report a novel composite catalyst (C-nZVI/Sep) designed for the efficient activation of PMS at ultralow concentrations. The catalyst was synthesized via a facile impregnation-calcination method, enabling the ordered loading of carbon-encapsulated nano zerovalent iron (nZVI) onto a sepiolite (Sep) support. Remarkably, with only 0.05 mM PMS, the C-nZVI/Sep/PMS system achieved near-complete removal (99.3%) of acetaminophen within 4 min. The observed degradation rate constant (K-value) of 1024.68 min–1 M–1 significantly outperforms previously reported catalysts. Comprehensive mechanistic studies revealed that the carbon-coated nZVI structure facilitates a continuous electron supply, facilitating proton (H+) conversion to active hydrogen (•H). This, in turn, drives the partial transformation of superoxide radicals (•O2–) into singlet oxygen (1O2), creating a synergistic pathway for rapid ACE degradation. Long-term flow-through column tests demonstrated exceptional stability with zero iron leaching (below the detection limit) over 25 days, underscoring the system’s environmental compatibility and practical potential. This study presents a low-cost, scalable strategy to advance PMS-based advanced oxidation processes for efficient and sustainable wastewater treatment.
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry C
·
2026
·
IF 3.4
Chen Zhou,Xue-Yang Xiong,Ying-Yan Chen,Yi-Fan Yu,Hongmei Li,Hao Jiang,Po Li,Jia-Sheng Lin,Shisheng Zheng,Yue-Jiao Zhang,Jian-Feng Li
Quantitative identification of iron-based corrosion products is crucial for elucidating phase evolution and reaction pathways in complex oxidation environments. However, Raman-based compositional analysis remains challenging due to severe spectral overlap and nonlinear interactions among components in multicomponent systems. In this work, a data-driven framework is developed for the quantitative analysis of iron oxide mixtures using Raman spectroscopy. Representative corrosion-related phases, including α-FeOOH, α-Fe2O3, and Fe3O4, were systematically characterized to establish their vibrational fingerprints. A series of 27 mixtures with controlled compositions was prepared, and the data set was expanded to 2700 spectra through data augmentation to improve model robustness. A deep learning model based on ResNet18 was implemented to capture complex spectral correlations and nonlinear mixing behavior, and its performance was benchmarked against convolutional neural network (CNN) and partial least-squares (PLS) approaches. The ResNet18 model achieves superior predictive accuracy, with a coefficient of determination (R2) of 0.9627 and a mean absolute error (MAE) of 3.18%. The incorporation of residual connections mitigates gradient degradation, enabling stable training and improved generalization. The absence of systematic bias in residuals further confirms the reliability of the model. These results demonstrate an effective strategy for resolving overlapping vibrational features and provide a generalizable approach for quantitative analysis of complex multicomponent Raman systems.
✓ 已验证
DOI
高影响因子