ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Xinyi Gu,Yuan Tao,Bin Wen,Yusheng Jin,Jincheng Ni,Yanlei Hu,Dong Wu,Jiaru Chu,Jiawen Li
Three-dimensional (3D) glass-ceramics nanoarchitectures hold significant potential for integrated photonics and microsystems, yet their functionality is not tunable since their shapes are typically fixed, limiting their use in adaptive devices. Here, a method for fabricating high-performance 3D piezoelectric glass-ceramics nanoarchitectures with feature sizes down to 160 nm is reported, which simultaneously exhibits excellent optical transparency and a pronounced piezoelectric response. A transparent single-source photoresist with an inorganic content of 66 wt % is proposed for high-resolution optical nanofabrication. Combining two-photon lithography with a carefully controlled sintering process, a polycrystalline ZnO–SiO2 glass-ceramics and an optimally performing monocrystalline Zn2SiO4–SiO2 glass-ceramics are obtained at 600 °C and 900 °C, respectively. The monocrystalline glass-ceramics achieve fully dense and high-fidelity 3D nanoarchitectures, which simultaneously exhibit enhanced piezoelectric response (d33 ∼ 45 pm/V) with fluorescence emission and excellent optical transparency. Moreover, a distinct angle-sensitive structural color from high-precision 3D photonic structures is demonstrated. This study demonstrates a promising strategy for developing tunable 3D glass-ceramics nanoarchitectures, with engineering application prospects in optical metamaterials, nanoelectromechanical systems, and intelligent transparent microsystems.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Zhoujing Chen,Didi Wen,Xiaoli Liang,Yuqi Li,Yongkang Bai
Developing sustainable bioelectronics that simultaneously integrate mechanical robustness, high conductivity, biocompatibility, and system-level functionality remains a fundamental challenge. Here, we report a Hofmeister-engineered, fully biobased hydrogel platform (GT2C20) that addresses these limitations through a synergistic dual physical cross-linking network. By combining citrate-induced chain compaction and continuous ionic transport pathways, this hydrogel achieves high tensile strength (0.73 MPa), large extensibility (272.5%), and high electrical conductivity (1.8 S m–1), overcoming intrinsic trade-offs in conventional gelatin-based systems. Building on these properties, GT2C20 enables an integrated multifunctional bioelectronic system. As a skin-conformal bioelectrode, it provides high-fidelity acquisition of electrophysiological signals (ECG, EEG, and EMG), achieving a high signal-to-noise ratio (24.3 dB for ECG) compared to commercial Ag/AgCl electrodes. When integrated with deep learning algorithms, the platform enables autonomous assessment of Brunnstrom stages for stroke rehabilitation with an accuracy of 97.31%, while a wireless telemedicine system supports remote diagnosis and personalized healthcare management. In parallel, the hydrogel functions as a highly stable strain sensor for real-time motion monitoring and precise gesture recognition, enabling intuitive control of prosthetic devices. Additionally, the hydrogel acts as a triboelectric nanogenerator electrode, yielding an open-circuit voltage of 72.1 V to power its own functions, while a microcontroller system supports wireless telemedicine and remote rehabilitation monitoring. This work presents an eco-friendly strategy for fabricating high-performance, biobased flexible electronics suited for health monitoring, telemedicine, and soft robotics.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Jingyi Wang,Binbin Wu,Yu Yao,Baoliang Chen,Shushi Peng,Chiheng Chu
Methane (CH4) production is commonly associated with anaerobic microbial respiration, yet substantial CH4 production has been observed in aerobic surface waters, presenting the “aerobic methane paradox”. Clarifying the mechanism behind aerobic CH4 production is essential for refining the global CH4 budget. Here, we demonstrate that sunlight-driven photochemical processes can effectively produce CH4 across various surface waters, including river, lake, and seawater. The CH4 formation rates ranged from 0.4 ± 0.1 to 0.7 ± 0.1 μmol/m2/h in the daytime, which were 2.3- to 3.9-fold higher as compared to those driven by the decomposition of organic matter by methanogenic archaea in the nighttime. Such aerobic CH4 production stems from the rapid oxidation of naturally abundant methyl donors (e.g., dimethyl sulfoxide) by a photochemically produced hydroxyl radical (•OH), which yields a methyl radical (•CH3) and subsequently leads to CH4 production. Simulations on CH4 productions across varying seasons, latitudes, altitudes, and regions at the global scale suggest that the photochemical processes contribute to 35.3–70.7% of marine CH4 emissions. Our study highlights a ubiquitous yet previously overlooked photochemical source of CH4 production in surface waters, shedding light on the “aerobic methane paradox”, which has implications on the global CH4 budget.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Sheng Wang,Lijing Xu,Zhiwei Wang,Li Wang
Boron removal has long been a technical challenge in desalination, particularly for the state-of-the-art reverse osmosis (RO) systems. Conventional methods, such as multistage RO or ion exchange, are typically energy-intensive and environmentally unfriendly, highlighting the need for sustainable and efficient boron removal strategies. In this study, we developed a carbon cloth-integrated bipolar membrane electrodialysis (C-BMED) technology, which combines bipolar membranes (BPMs) and carbon cloth within the electrodialysis (ED) cell. The carbon cloth serves as a solid-state buffer for maintaining OH– in the desalination chamber, creating a locally alkaline environment that promotes boron ionization and removal. Its high conductivity also reduces system resistance, lowering energy consumption. Compared to RO, electrosorption (ES), and conventional ED, C-BMED overcomes the typical trade-off between the boron removal rate and energy efficiency, enabling continuous, rapid, and energy-efficient boron removal. Overall, the system achieves a boron removal rate exceeding 440 ng min–1 cm–2, with a specific energy consumption below 0.25 kWh g-B–1.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Xiaoliang Yu,Yuxiao Zhao,Luyao Tian,Yuchuan Liu,Jing Cui,Zhi Fan,Minjie Guo,Yingcheng Li,Bowen Cheng
Short-distance optical communication technology has been promoted to a crucial position with the rapid development of network systems centered around data, which inevitably leads to the urgency of developing a high-performance optical transmission medium. To address these requirements, several ternary copolymerized polyimides, known as high-performance engineering plastics, are developed through the most common two-step thermal imidization strategy. The introduction of trifluoromethoxy (−OCF3) groups provides polymers with an ultrahigh refractive index above 1.8 under the common observation conditions of communication wavelengths, as well as an ultralow birefringence of 0.003. More importantly, under the chief band of optical fiber communication at 1310 and 1550 nm, generated by modulated lasers, these polymers show very weak light absorption and signal attenuation behaviors, thereby demonstrating huge potential in the field of optical waveguide device development. Additionally, considering the extremely low moisture absorption of the polymers, these transparent polyimides with high refractive index are expected to be fundamental material candidates in many fields, such as optical communication, the Internet of Things, 5G transmission, and other advanced technologies in extreme environments.
✓ 已验证
DOI
PubMed
高影响因子
ACS Nano
·
2026
·
IF 17.3
Lei Xu,Qun Ma,Linfeng Chen,Xiqi Zhang,Bo Song,Teng Ben,Donglin Jiang,Fan Xia
Ionic current rectification (i.e., ICR) is a pivotal phenomenon in nanofluidic systems, crucial for various applications such as bioanalysis, iontronics, ion sieving, and energy conversion. Despite its importance, previous studies on the ICR have predominantly concentrated on the inner wall of nanochannels and the functional elements (FEs) distributed within it, often overlooking the outer surface (OS) and its FEs, including steric hindrance, surface charge, or space charge contributions to ICR, not to mention the potential synergistic influence of these factors on ICR. This study addresses the gap by demonstrating the substantial impact of OS functional elements (FEOS) on ICR based on porous polyethylene terephthalate nanochannels featuring only OS functionalization at the tip side. We established seven distinct models and revealed that the synergistic effects of surface charge, space charge, and steric hindrance of the FEOS are identified as pivotal in the ICR process. Using polyethylenimine as FEOS, an ICR of ∼1000 at 0.1 M KCl was achieved, the highest value regulated by only FEOS. Furthermore, we also demonstrated the ability to regulate ICR via the OS and the potential sensing capability of the nanochannels. These findings highlight the role of FEOS in the nanochannel electrokinetics and can inform the design of FEOS-engineered nanofluidic devices for ionic circuit chips, biosensing, energy conversion, and DNA analysis.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Jiale Wang,Junfeng Wang,Rui Yuan,Yadong Zhang,Lingling Mao,Ping Li,Zepeng Fu,Wei Zhang
Methanol is an attractive liquid hydrogen carrier owing to its high hydrogen density, convenient storage and transport, and its potential for sustainable production from renewable carbon resources. Plasma-assisted methanol decomposition offers a flexible and on-demand pathway for hydrogen generation under near-ambient conditions, avoiding the limitations of conventional thermocatalytic processes. In this work, a liquid-phase plasma discharge system was developed for methanol decomposition, in which plasma-catalyst synergistic effects promote molecular activation, accelerate reactions, and suppress carbon deposition. Systematic evaluation of electrode geometry demonstrates that the needle–needle configuration enhances hydrogen production by 10.3%, achieving a hydrogen flow rate of 685.75 ± 11.96 mL/min compared with a conventional needle–ring design, owing to its more concentrated and spatially distributed discharge. Further performance improvements are obtained using tungsten–nickel (W–Ni) alloy electrodes, which increase the hydrogen flow rate to 754.98 ± 15.04 mL/min, effectively mitigate carbon deposition, and maintain a high energy conversion efficiency of 56.72 ± 0.25%. As a result, the optimized system achieves a specific energy consumption of 1.14 ± 0.03 kWh/Nm3 H2, representing a 10.5% reduction relative to pure tungsten electrodes. These findings underscore the critical roles of plasma-catalyst synergy and electrode material engineering in the development of efficient, durable, and energy-efficient hydrogen production systems from methanol or other liquid fuels.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Jie Guan,Lin Zhu,Fei Wang,Zhaoyi Xie,Zhongti Sun,Kan Zhang
Porphyrin organic frameworks (POFs) have garnered significant interest within the realm of organic framework materials, which is largely attributed to their conjugated molecular architecture and well-ordered pore channels. In this study, zinc metal was coordinated with porphyrin, and carbon nanotubes (CNTs) were employed as a template to synthesize the CNT@POF composite. The high conductivity and enhanced ion transport capability of CNTs were synergistically combined with the porphyrin system to construct an interfacial protective layer on the Zn anode for aqueous Zn-ion batteries (AZIBs). This present design is intended to inhibit undesirable parasitic reactions, namely, dendrite formation, chemical corrosion, electrode passivation, and hydrogen evolution. Long-term cycling results prove that the symmetric cell featuring this protective coating can operate stably for 1150 h while operated at 3 mA cm–2 and 1 mAh cm–2. Furthermore, after 4000 cycles at 5 A g–1, the full cell retains a specific capacity of 93.5 mAh g–1, equating to a capacity retention of 85.5%. The present research presents an interfacial modification strategy based on metal-coordinated porphyrin and template-assisted synthesis, providing a viable route to realizing dendrite-free Zn anodes for high-performing AZIBs.
✓ 已验证
DOI
PubMed
高影响因子
CRYSTAL GROWTH & DESIGN
·
2026
·
IF 3.6
Yingying He,Wangchuan Xiao,Rongrong Xue,Fenghua Chen
The nonclassical crystallization processes via amorphous precursors are one of the important principles in the organic biomineralization of guanine. Hypoxanthine is the second component in guanine biominerals. Amorphous hypoxanthine was synthesized for the first time via a neat ball-milling method, and a novel hypoxanthine polymorph (Form IV) was recrystallized from the amorphous hypoxanthine precursor via a moisture-induced solid–solid phase transition. 13C ss-NMR, IR, and Raman spectroscopy confirmed that the amorphous hypoxanthine and Form IV consist of keto-N7H and keto-N9H hypoxanthine tautomers, and it was also found that the short-range order of the amorphous hypoxanthine is more similar to that of Form IV than to the other hypoxanthine polymorphs. The tautomeric-stabilized mechanism of amorphous hypoxanthine provides new insight into the amorphous phases of small organic molecules, and the preparation process of tautomeric Form IV represents a successful application of the organic biomineralization principle of amorphous precursors.
✓ 已验证
DOI
高影响因子
ACS Omega
·
2026
·
IF 5.2
Qing Lin,Haoran Jiang,Yong Hu,Ziwen Dong,Song Kong,Yangli Cui
Addressing the practical predicament of uneven global distribution of phosphate resources, this study focuses on transition-metal-based short-chain perfluorocarboxylates (Mn-TFA and Ni-TFA) and systematically investigates their flame-retardant properties, aiming to develop efficient novel phosphorus-free flame retardants. The results of micromorphological characterization indicate that Mn-TFA forms a porous network structure, and Ni-TFA exhibits a polyhedral morphology, both of which possess distinct crystallinity attributed to the coordination interaction between metal ions and carboxylate groups. Flame-retardant performance evaluation demonstrates that samples display excellent flame-retardant effects: their flame-retardant performance is significantly superior to that of ammonium dihydrogen phosphate (the core active component of commercial flame retardants) at all tested concentrations. Particularly under medium-concentration loading conditions, the flame-retardant paper can achieve a self-extinguishing effect. The results of TG-IR-MS combined analysis show that the generation rates of CO and CO2 in the fuel system are significantly accelerated under the action of the flame retardants, indicating that the flame-retardant process is dominated by the condensed-phase effect.
✓ 已验证
DOI
PubMed
高影响因子
ACS Sensors
·
2026
·
IF 10.9
Jingxia Huang,Hongyu Ren,Ye Tian,Xiangyu Shan,Limin Ma,Zhangpeng Li,Jinqing Wang
Iontronic pressure sensors hold great promise for electronic skins and related fields, yet conventional single-microstructure designs struggle to balance sensitivity and linear range, whereas ionic leakage induces signal drift. Herein, we present a highly effective anti-leakage iontronic sensor featuring a surface gradient microcone array. The design leverages the progressive deformation of multilevel microstructures and immobilizes ionic liquids within a thermoplastic polyurethane matrix via hydrogen bonding and electrostatic interactions. By optimizing additives and microstructural parameters, we achieved synergistic control over electromechanical properties and response behavior. The sensor exhibits a high sensitivity of 209 kPa−1 over a wide linear range of 10−200 kPa (R2 = 0.997), an ultralow detection limit of 2 Pa, a high-pressure resolution of 12 Pa under an 8 kPa preload, and a low signal drift rate of 4.6% over 3000 cycles. Applications demonstrated include encrypted Morse code transmission, physiological signal monitoring, joint motion recognition, and detection of 5 to 30 μm microvibrations. This work provides a mechanochemical synergistic strategy for designing high-performance flexible pressure sensors.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Tianyu Wu,Yudong Li,Jiahao Dong,Chuanfang Zhao,Xiaoyu Huang,Baiyi Zu,Xincun Dou
Cathinone derivatives, a major class of new psychoactive substances, pose severe public health threats, because of their high toxicity, addictiveness, and concealed circulation, rendering their rapid on-site detection a critical challenge. Herein, a π-conjugation-tuning strategy based on the excited-state intramolecular proton transfer (ESIPT) mechanism is proposed to modulate multinoncovalent interactions via π-conjugation regulation and enable rapid, specific dual-mode detection of cathinone derivatives. The optimized carbazole-imidazole-based ESIPT probe IM-3 exhibits a distinct dual-mode response upon binding to methcathinone (MC): fluorescence quenching via a photoinduced electron transfer (PET) process that suppresses the ESIPT emission, and a color change from yellow to colorless, both triggered by synergistic multinoncovalent interactions (π-π stacking and N–H···N hydrogen bonding). This sensing system achieves ultrafast detection within 0.8 s, with low limits of detection (LOD): 4.7 μM (fluorescence mode) and 6.6 μM (colorimetric mode), excellent selectivity against 19 potential interferents, and robust stability and reliable performance across a wide range of pH and temperature conditions. The portable sensor, constructed through probe immobilization on a solid–liquid separation platform, provides accurate methcathinone in samples ranging from spiked matrices (sewage, blood, chocolate, beverage) to an authentic specimen. This work establishes a strategy for detecting cathinone derivatives (a representative class of low-nucleophilicity inert analytes) via π-conjugation-tuned multinoncovalent interactions, and provides a foundation for the next-generation dual-mode probes exploration and practical on-site security screening technologies advancing.
✓ 已验证
DOI
PubMed
高影响因子