SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Jiuyun Cui,Atian Xie,Zhuo Yan,Yongsheng Yan
Although a great deal of superhydrophilic/underwater superoleophobic membranes has been developing for oil-water emulsion separation, most of them could be destroyed or lose their underwater superoleophobicity after exposure to complex conditions. In this study, a crosslinking modified PVDF/GO membrane with acid, alkali and high salt resistance was successfully prepared by a simple crosslinking process between acrylic acid and ethylene glycol dimethacrylate (EGDMA). The influences of content of acrylic acid on the membrane performance and structure evolution were investigated. The resultant composite membrane showed superior underwater superoleophobicity even in acid, alkali and salt environments. Additionally, the composite membrane could effectively separate various surfactant-stabilize emulsions under gravity-driven via wettability capillary effect with high rejection (>99%) and flux (>145 L m −2 h −1 ). The composite membrane also exhibited outstanding recyclability because of the stable covalent bridged multiple networks structure. The antifouling performance, stability and impressive recyclability make the composite membrane a promising candidate for long-term oil-water emulsion treatment.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2021
·Vol. 6
·期 14
·3370-3377
·
IF 2.109
Kazem Karami,Ali Mardaniboldaji,Mohammad R. Rezayat,Parvaneh Bayat,Mohammad T Jafari
Graphical New UiO-66-NH 2 /Gly/GO nanocomposite solvothermally synthesised and characterized by techniques such as FTIR, XRD, EDAX, TGA, TEM and SEM. Nanocomposite has been exploited as an adsorbent in solid phase microextraction (SPME) method and also the pesticide chlorpyrifos as an organophosphorous pesticide is selected for the model compound. As for a determination system, Corona discharge ionization-ion mobility spectrometry (CD-IMS) has been employed. This paper seeks to produce UiO-66-NH 2 /Gly/GO nanocomposite, which is solvothermally synthesised by the “prefunctionalisation” approach using 2-aminoterephthalic acid as an organic linker in a Teflon lined autoclave and its linking to a graphene surface by glycine and finally characterized by methods such as FTIR spectrometer, Powder X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), thermal stability measurement (TGA), transmission electron microscope (TEM), scanning electron microscope (SEM) and the Brunauer-Emmet-Teller (BET). UiO-66-NH 2 /Gly/GO nanocomposite has been exploited as an adsorbent in solid phase microextraction (SPME) method and also the pesticide chlorpyrifos as an organophosphorous pesticide is selected for the model compound. As for a determination system, Corona discharge ionization-ion mobility spectrometry (CD-IMS) has been employed. The nanocomposite capability in extracting the target analyte before and after the coating of the GO has been experimentally investigated. The IMS sensitivity has been strikingly increased in the course of using the GO as the nanocomposite coating. In order to increase the extraction efficiency and preconcentration of the analyte, both extraction temperature and time are scrutinized. All through this method, analysis factors are achieved as follows: linear dynamic range (LDR); 0.5-20.0 μg L −1 , correlation coefficient (R 2 ); 0.9992, the limit of quantification (LOQ); 0.5 μg L −1 , and limit of detection (LOD); 0.15 μg L −1 . On the whole, the proposed approach seems to be regarded as a successful method for analyzing the organophosphouros pesticide.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2021
·
IF 10.588
Cong Liao,Yi-Ping Liu,Hao Ren,Xin-Yu Jiang,Jin-Gang Yu,Xiao-Qing Chen
An aromatic heterocyclic compound , 2-aminobenzothiazole (ABT), was used to decorate graphene oxide (GO) by a facile hydrothermal self-assembly procedure. The developed three-dimensional (3D) GO-ABT composite aerogels could be utilized as high-powered and sustainable adsorbents for the enrichment and recovery of low concentration rare earth elements (REEs) from aqueous solutions. The composition and microstructure of GO-ABT composites were explored various characterization methods. The enrichment properties of GO-ABT composites for REEs were investigated in detail, revealing the existence of S-, N- and –NH 2 in ABT, as well as the carboxyl and hydroxyl groups of GO which might act as the major REE binding sites. The adsorption of GO-ABT composites for low concentration REEs could reach equilibrium in 30 min. Our investigations confirmed that the optimal pH value of GO-ABT composites for REEs was pH 4.0–5.0. For the adsorbent regeneration study, 50.0 mg of GO-ABT 15:1/120 °C/6 h composite was used toward 20.0 mL of Er 3+ solutions. After ten regeneration cycles, the adsorption rates of GO-ABT composites for Er 3+ remained around 100%, and the desorption rates maintained over 90%. The long-term storage of the adsorbent did not affect its adsorption ability, while desorption rates increased, indicating it possessed relatively higher stability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Zhencai Qu,Chang-an Xu,Xiaobin Li,Yifei Wu,Kunxin Wang,Xiaole Zheng,Xiaohua Cui,Xiankun Wu,Jun Shi,Kun Wu
Design and exploitation of smart fire-warning devices with ultrasensitive response capability are always an urgent need for effective fire protection. Herein, a nano-filler (BP-MoS 2 ) is prepared by ball milling black phosphorene and molybdenum disulfide and added into the graphene oxide (GO) film to fabricate a multifunctional film with high fire resistance and rapid response ability. When the addition of BP-MoS 2 is 20.0 wt%, the GO/BP-MoS 2 20.0 shows an excellent flame retardancy. The residual char rate is improved from 46.60% to 66.65%, and its peak of heat release rate (pHRR) value has reduced from 599.92 W g −1 to 274.00 W g −1 , resulting in a 54.33% decrease, which is attributed to the ultra-fast catalytic char formation and synergistic flame retardancy of BP and MoS 2 . Meanwhile, the composite film can still maintain the original shape within 15 s of ignition. More interestingly, when encountering a flame attack, it reveals an ultra-fast fire warning response (about 1 s), which is attributed to the fast carbonization after contacting with flame. Such approach offers a novel perspective for the preparation of intelligent fire alarm devices with ultra-fast response ability.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES SCIENCE AND TECHNOLOGY
·
2020
·
IF 7.094
Qungui Wei,Dan Yang,Liyuan Yu,Yufeng Ni,Liqun Zhang
Owing to excellent adhesion and easy process, dopamine has been widely used as an intermediate for adjusting the molecular structure of nanoparticles . However, the high cost of dopamine largely impedes its large-scale applications. Herein, alumina@poly(catechol-polyamine)@graphene oxide (denoted as Al 2 O 3 @PCPA@GO) multilayer core-shell hybrids were prepared via poly(catechol-polyamine) (PCPA) modification. The as-prepared hybrids were added into the carboxyl nitrile butadiene rubber (XNBR) latex to produce composites with high thermal conductivity because of the strong interaction between polar groups in Al 2 O 3 @PCPA@GO core-shell hybrids and C N groups in XNBR matrix. Finally, the maximum thermal conductivity (0.48 W/mK) was obtained with 30 vol% Al 2 O 3 @PCPA@GO/XNBR composite, which was about three times of pure XNBR matrix (0.16 W/mK). Moreover, 30 vol% Al 2 O 3 @PCPA@GO composite showed a high dielectric constant (16.84 at 100 Hz) and low dielectric loss tangent (0.45 at 100 Hz). Besides, the 30 vol% Al 2 O 3 @PCPA@GO/XNBR composite displayed a high tensile strength of 11.86 MPa, which is an advantage for practical applications. The developed method has a shorter reaction time and lower cost compared with poly(dopamine) coating, suggesting potential applications as thermally conductive materials for electronic equipment.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY
·
2020
·
IF 3.306
Jinying Du,Ning Li,Yu Tian,Jun Zhang,Wei Zuo
A novel composite membrane was prepared successfully by blending polyvinylidene fluoride (PVDF) with the synthesized graphene oxide-zinc sulfide (GO-ZnS) nanocomposites via phase inversion method. The dispersion of GO-ZnS and its effect on the performance of the PVDF membrane were investigated using the morphology, crystal structure and chemical composition of the composite PVDF membrane. With the content of GO-ZnS in the PVDF membrane increasing from 0 to 5.0 wt%, the contact angle declined continuously and thus the hydrophilicity of membrane increased after modification. Similarly, the pure water flux of GO-ZnS/PVDF membrane reached up to 431.9 L/(m 2 h) when 5.0 wt% GO-ZnS was blended. All membranes presented a high bovine serum albumin (BSA) removal and the rejection was about 86.5%. More importantly, the GO-ZnS/PVDF membrane exhibited a smaller irreversible fouling ratio and a higher flux recovery rate, revealing that blending with GO-ZnS could improve the self-cleaning under UV irradiation and the antifouling properties of PVDF membrane.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2022
·
IF 6.206
Bo Shu,Zhilang Liu,Zhaoqing Liu,Pengsong Li,Xin Li,Shaoheng Yang,Huangwei Chen,Jiqiang Liu,Zhuohong Yang,Yang Hu
Graphene oxide (GO) acted as an inorganic filler has attracted great attention in the construction of polymer-based composite coating film. Nevertheless, the high surface area, obvious van der Waals forces, and abundant hydrophilic groups of GO result in its poor dispersion behavior and compatibility in hydrophobic polymer , which greatly limits its widespread practical application. To solve the above issue, we have prepared SiO 2 -decorated GO (GO-SiO 2 ) nanoparticles using the sol-gel hydrolysis method. The FTIR, Raman spectra, XPS and SEM analysis displayed that GO-SiO 2 nanoparticles were successfully constructed and the SiO 2 nanoparticles are covalently grafted onto GO sheet surfaces. Moreover, the GO-SiO 2 nanoparticles are further employed as inorganic fillers into the non-solvent UV-curable castor oil-based polyurethane acrylate (COPUA) systems for the preparation of composite coating films. Herein, the GO-SiO 2 nanoparticles can be uniformly dispersed in hydrophobic COPUA-based coating precursor, and have favorable compatibility with COPUA resin. The incorporation of GO-SiO 2 nanoparticles into the coating film matrix would slightly decrease the gel content of coating films (all gel contents are above 91.5 %) while improving the hydrophobic property of coating films. Furthermore, the thermal stability and mechanical performance of coating films have reasonably enhanced trends by the incorporation of GO-SiO 2 nanoparticles. The prepared coating films display favorable acid, alkali, and solvent resistance , and the high content of GO-SiO 2 nanoparticles is beneficial to aggrandize the anticorrosion performance of coating films. This work provides a universal approach to modify GO sheets and construct multifunctional modified GO/polyurethane composite film for coating application.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2022
·
IF 7.968
Fan-xin Kong,Lian You,Jia-mei Cao,Qian Liu,Ping Xia,Jin-fu Chen
Holey graphene oxide (HGO) and reduced HGO membranes (rHGO) can overcome high tortuosity and poor stability of GO-based membranes, respectively. In this study, HGO and rHGO membranes were fabricated to try to quantitatively elucidate the etching and reduction time on structure, stability and rejection performance for slat and pharmaceuticals. Water flux of HGO membrane linearly increased ( J v =2.07 t + 1.02, R 2 =0.9931) and Na 2 SO 4 rejection linearly decreased ( R Na2SO4 =−4.37 t + 88.26, R 2 =0.9511), while the membranes stability substantially increased with etching time from 1 to 5 h (water flux variation from 22% to 5% and rejection ratio variation from 17% to 7%) under long-term vibration . Subsequently, water flux of rHGO membranes exponentially decreased ( J v = exp (2.89–0.12 t + 0.0039 t 2 ), R 2 = 0.9996) with reduction time, while slightly improved salt rejection ( R Na2SO4 = exp (2.89–0.12 t + 0.0039 t 2 ), R 2 = 0.9971) were observed. Effective length of actual pathways for GO, HGO 4 and rHGO 4–5 membranes calculated by the mass transfer-based model was 7.37 ± 0.47, 4.48 ± 0.68 and 7.23 ± 1.29 µm, respectively, which were much higher than that geometric thickness of the GO membranes. These results indicated that d -spacing, tortuosity and porosity should be comprehensively considered for membrane design and fabrication. With a series of saccharides as probes, average pore size slightly decreased for HGO 4 ( r p =0.36 nm, S p =0.34) and rHGO 4–5 ( r p =0.33 nm, S p =0.28) membrane compared with GO membranes ( r p =0.38 nm, S p =0.3), demonstrating that etching and following reduction marginally affected the pore size distribution. H 2 O 2 etching increased both water permeability ( A) and its selectivity ( A/B ) for three pharmaceuticals, while the thermal reduction substantially decreased the water flux. Moderate and low rejection ratios for the three pharmaceuticals also demonstrated the importance of trade-off between etching and reduction time and the urgent need for narrowing pore-size distribution for GO-based membranes for water purification .
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2023
·
IF 4.1
Xiuzhu Zhang,Qiuxiang Wang,Zongxue Yu,Juan Wang,Qiuyue Tan,Niandan He
With the development of industry, water resources have been seriously polluted, posing a great threat to human health and ecological development, and it is urgent to realize the efficient treatment of sewage-containing wastewater. The CoSx modified by thioacetamide grew in the interlayer of graphene oxide , which provided the composite membrane with self-cleaning ability, and at the same time enlarged the interlayer channels, which resulted in the flux and hydrophilicity significantly better than that of GO, and the retention rate of different types of oil-in-water emulsions was above 99 %. Encouragingly, the GO@CoSx-activated PMS system exhibited extremely high degradation performance for methylene blue. After 5 cycles, the flux of the composite membrane to the oil red-petroleum ether-oil-in-water emulsion under the light condition was higher than that under the dark condition, and the retention rate was kept at 99.93 %, with excellent antifouling performance. The composite membrane showed good degradation of methylene blue under alkaline conditions (99.84 %) and excellent removal of oil red-petroleum ether-oil-in-water emulsion under strong acid/alkaline conditions (99.37 %). The composite membrane has good chemical stability and mechanical properties for long-term use. This study will provide a new idea for the separation of oil-water emulsions, which has a broad application prospect.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2023
·
IF 8.7
Tao Zhang,Wanling Cai,Zuliang Chen
Bio-nanocomposites have attracted increasing research attention because they are able to integrate bio- and nano-related functions, and subsequently demonstrate potentially beneficial environmental applications. Here, a functional bionanomaterial based on Burkholderia cepacian (FZ) immobilized on GO/ZIF-8 was developed and used to remove malachite green (MG), with functions based on both biodegradation and adsorption. XRD and FTIR results showed that in situ production of GO/ZIF-8 by combining Zn 2+ in ZIF-8 with the carboxyl group on the GO surface, led to FZ immobilized in GO/ZIF-8 through covalent bonding. Zeta analysis showed that the surface of FZ and GO/ZIF-8 had different charges under pH = 9.12, suggesting immobilization also occurred via electrostatic action. BET results confirmed that the specific surface area of GO/ZIF-8 was much larger than that of GO and ZIF-8, but the reduced specific surface area of FZ@GO/ZIF-8 could be due to FZ loading on its surface. The efficiency of FZ@GO/ZIF-8 in the removal of MG reached 99% and furthermore retained good stability after five cycles. The efficiency in removing multiple ions in river water reached more than 80%, which is evidence strongly suggesting that FZ@GO/ZIF-8 is an environmental bionanomaterial with effective application potential.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Yanai Chen,Limin Chang,Ziheng Zhang,Min Zhou,Yuanwei Gao,Yong Wang,Yanfang Liu,Jianglei Qin
Thermo-responsive hydrogels with biodegradability have great application in biomedical areas, while the Poly(N-isopropylacrylamide) (PNIPAM) based hydrogels exhibiting lower critical solution temperature (LCST) around body temperature have shown promising applications in diverse areas such as drug delivery, tissue engineering, and wound repairing. In this study, PNIPAM based thermo-responsive copolymer with ketone functional group was polymerized and the LCST was regulated to body temperature, then biodegradable self-healing hydrogels with injectability were fabricated by cross-linking the thermo-responsive copolymers with dopamine functionalized pectin hydrazide (PDAH). The hydrogel exhibited good mechanical strength, excellent biocompatibility and thermo-responsive sustained drug release process. The nano-graphene oxide (GO) was incorporated to design near-infrared (NIR) sensitive nanocomposite hydrogel to serve as photothermal enhanced wound dressing with vancomycin loading. The composite hydrogel also showed pH-responsive drug release behavior and the NIR irradiation also accelerated the release rate based on photothermal induced phase transition. More importantly, the nanocomposite hydrogel with vancomycin loading and photothermal property can promoted burn wound repairing rate by inhibiting the bacterial growth. As a result, this GO composite hydrogel (GO/hydrogel) could act as NIR triggered photo-thermal enhanced drug delivery platform for promoted wound repairing in the near future.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Xuemei Yao,Ziting Qi,Peizhi Yang,Jiabao Li,Wen Yang
Simultaneously manipulating the interfacial energetics to boost charge extraction and passivate defective nanostructure to suppress unwanted non-radiative recombination is of great importance to increase the power conversion efficiency and long-term stability of carbon-based perovskite solar cells (C-PSCs), which requires rational design of interfacial regulator. Herein, a novel two-dimensional (2D) Ti 3 C 2 T x MXene patched graphene oxide (GO) heterojunction is fabricated as perovskite film plaster to improve the overall photovoltaic performance of C-PSCs. Arising from the nucleophilic substitution and dehydration reaction between MXene (Ti-O - ) and GO (-C=OH + ), the negative-charge-centered GO induced by the oxygen-containing functional groups is healed. As a result, this heterojunction not only aligns the perovskite/carbon energy-level and provides a channel for carrier transport, but also effectively solidifies the soft perovskite lattice, universally promoting the efficiencies up to 11.07% for inorganic CsPbIBr 2 C-PSC and 15.04% for CsPbI 2 Br C-PSC with significantly improved stability.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）