JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2019
·Vol. 141
·期 4
·1413-1423
·
IF 2.471
Zhang Ming,Zhao Fengqi,Yang Yanjing,Li Hui,Gao Hongxu,Yao Ergang,Zhang Jiankan,An Ting,Jiang Zhoufeng
Bimetallic iron oxides (NiFe 2 O 4 , ZnFe 2 O 4 and CoFe 2 O 4 ) were prepared via the facile solvothermal method and characterized using SEM, TEM, XRD, FTIR, XPS and BET instruments. The catalytic behavior of the bimetallic iron oxides on the thermal decomposition of 5, 5′-bistetrazole-1, 1′-diolate (TKX-50) was studied using DSC and TG-DTG methods. Besides, the corresponding kinetic parameters of TKX-50 thermal decomposition were calculated by multi-kinetics methods including traditional, iso-conversional and iteration methods. The thermal decomposition peak temperature ( T p ) and the activation energy ( E a ) reduced obviously after the addition of bimetallic iron oxides. Among different bimetallic iron oxides, the ZnFe 2 O 4 has the best catalytic activity for TKX-50 thermal decomposition. The high thermal decomposition peak temperature ( T HDP ) and average apparent activation energy ( E a ) of TKX-50 were decreased by 47.0 °C and 34.34 kJ mol −1 in the presence of ZnFe 2 O 4 sample. The excellent catalytic activity of ZnFe 2 O 4 for thermal decomposition of TKX-50 makes it a promising combustion catalyst of insensitive solid propellants containing TKX-50.
研究领域:
材料科学
·
燃烧与推进
·
物理化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2018
·
IF 3.057
Mingxu Sui,Tianqi Fu,Xiaodong Sun,Guangzhen Cui,Xuliang Lv,Guangxin Gu
Unary and binary M 2+ (M=Mn, Co, Ni, Zn) substituted hollow Fe 3 O 4 were prepared by one-step solvothermal method. The crystallographic structure, morphology, element components and microwave absorbing properties of as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), Energy-dispersive X-ray (EDX) and vector network analyzer (VNA). The unary and binary Co 2+ substitution of hollow Fe 3 O 4 could result in a significant improvement of microwave absorption performance, including the expanding of effective absorption bandwidth, the thinner thickness and the increment of absorbing intensity. The sample of CoFe 2 O 4 could reach an optimal reflection loss of − 28.78 dB at 15.52 GHz under the thickness of 1.5 mm, moreover, the efficient absorption bandwidth (less than −10 dB) is expanded to 5.56 GHz which is most outstanding among these samples. The minimum reflection loss of Co 0.75 Zn 0.25 Fe 2 O 4 could reach − 49.60 dB at 9.88 GHz under the thickness of 2 mm. The as-prepared products could be used as microwave absorber with the advantages of strong absorption, broad bandwidth and thin thickness. The favorable performance could be attributed to the strong magnetic loss, dielectric loss and good impedance matching properties.
研究领域:
材料科学
·
电磁学
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2020
·
IF 7.632
Linpin Luo,Zehui Su,Junchen Zhuo,Lunjie Huang,Ying Nian,Lihong Su,Wentao Zhang,Jianlong Wang
Improving the catalytic performance of nanozymes is currently one of the hot topics in the field of analytical chemistry. Metal ions can be an ideal way for the regulation of enzyme activity because of its unique advantages. Although great advances have been achieved, the efficiency and selectivity of nanozymes still has big room to improve. Herein, we found that the copper ions (Cu2+) could selectively and sensitively regulate the peroxidase-like activity of flower-like transition-metal-based material MMoO4 (M = Co, Ni). The peroxidase-like activity of MMoO4 could obviously be activated by Cu2+, which accelerated the effective oxidation of common chromogenic substrates represented by 3,3′,5,5′-tetramethylbenzidine. The catalytic activity of MMoO4–Cu2+ strongly relies on the reaction temperature and the pH of solution. Moreover, the kinetic behavior follows the Michaelis–Menten kinetics. Then, a simple, sensitive, and selective colorimetric strategy using CoMoO4 as the probe for detecting Cu2+ was established. The obvious color change can be discerned by the naked eye or detected by the absorption spectroscopic method. In the range of Cu2+ concentration of 0.1–24 μM, the absorbance at 652 nm exhibited a linear relationship to the concentration of Cu2+. The low detection limit of our method could achieve 0.024 μM, and our strategy can also be well applied in the real sample with good recoveries. Our work implied the promising use of nanozymes in heavy metal ion detection.
研究领域:
分析化学
·
纳米生物学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Lulu Wang,Beiyue Ma,Xinming Ren,Chao Yu,Chengji Deng,Chunming Liu,Chuanbo Hu
In an attempt to enhance the sintering and mechanical performance of porous cordierite ceramics (Mg 2 Al 4 Si 5 O 18 ) as support materials for vehicle exhaust catalysts, ZrO 2 and M x O y (M = La, Ce, and Nb) were simultaneously introduced into cordierite sintered at 1350 °C for 4 h. Then, the reinforced function of ZrO 2 and M x O y on the properties of porous cordierite ceramics was systematically evaluated, especially for the sample co-doped with ZrO 2 and La 2 O 3 . The results displayed a distinct enhancement in mechanical and thermal performance, and the cold compressive strength increased from 72.74 to 158.59 MPa as well as thermal conductivity ranged from 1.66 to 2.01 W m −1 K −1 , respectively. It is found that ZrO 2 facilitated activation sintering introduced via lattice distortion in cordierite and La 2 O 3 accelerated the formation of cordierite and ZrSiO 4 microcrystalline through the low-temperature liquid phase. The synergic effect between ZrO 2 and La 2 O 3 , therefore, had a significant role in the reinforced mechanical and thermal performance of porous cordierite ceramics. This work not only offers a feasible strengthening strategy, but also expands the possibilities for building high-performance structural and functional ceramics .
研究领域:
材料科学
·
陶瓷工程
·
汽车工程
✓ 已验证
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2022
·
IF 11.322
Xinyue Wang,Huan Cheng,Yuanzhi Min,Xian Li,Lijun You,Jumei Li
In this study, a crystalline mesoporous ZrO 2 interlayer allowing for enrichment capability and photocatalytic activity was introduced to develop a novel magnetic Fe 3 O 4 /m-ZrO 2 /Ag nanocomposite combined with excellent SERS activity and photocatalytic property. The coverage of Ag nanoparticles on Fe 3 O 4 /m-ZrO 2 /Ag was well controlled to tune their SERS sensitivity by varying the feed amount of AgNO 3 . Several characterization methods were utilized to investigate their composition, morphology and crystal structure. The SERS experiments demonstrated Fe 3 O 4 /m-ZrO 2 /Ag nanocomposites possessed markedly SERS sensitivity, exceptional signal reproducibility and excellent storing stability. They could sense R6G and Cr (VI) at the concentrations of 10 −9 and 5 × 10 −8 M, respectively. Beyond that, the Fe 3 O 4 /m-ZrO 2 /Ag nanocomposites effectively accomplished recyclable detecting R6G and Cr (VI) in 5 cycles through facile photocatalytic removal of pollutants under UV irradiation. Altogether, the novel Fe 3 O 4 /m-ZrO 2 /Ag nanocomposites prepared in this study have high SERS sensitivity and good photocatalytic performance, which is of great significance for environmental detection and ecological restoration.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2022
·
IF 10.53
Longming Jin,Lijie Hu,Songmiao Liang,Zhiliang Wang,Guoyang Xu,Xingsheng Yang
The organic solvent nanofiltration (OSN) membranes are an attractive candidate that enable carbon-neutral nature in both isolation and purification process. However, the application of current commercial available OSN membranes is severely hindered by their inferior permeability and selectivity. Here, using poly(m-phenylene isophthalamide) (PMIA) as support, a thin film composite (TFC) membrane with remarkably high permeability and ideal selectivity is fabricated in an industrial-scale manufacturing line and the relevant spiral-would module is successfully prepared. Optimization by the solvent activated, the TFC membrane with an extraordinary solvent permeation for acetone, methanol and acetonitrile are 63, 41 and 38 L m −2 h −1 ∙bar −1 , respectively. The nanofiltration performance of A-TFC membrane supports out-performs: at similar rejection (100%) the methanol and acetonitrile permeance increased dramatically at 10 and 5 times than current commercial OSN membranes, respectively. The spiral-would module is carried out in methanol and acetonitrile RB (1017 g mol −1 ) solution, which displays a high permeate fluxes and stable separation performances, methanol: 112 GPD, 98%; acetonitrile: 99 GPD, 99.3%. This work provided a large-scale facile process for high-performance PMIA based OSN membrane, and the fabrication of spiral-would module, which should be promising for manufacture of solvent-resistant TFC membrane in industrial scale-up.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2022
·
IF 8.047
Han He,Shuqian Xia,Dan Luo
Refining lignin for aromatic hydrocarbons was crucial in the development of clean energy. The most effective way to enhance the carbon efficiency of the raw materials was to reduce the hydrogen consumption and maximize the retention of aromatic ring by directly breaking the C Ar O bond. In this regard, Sn was introduced to regulate the selectivity of Ni/SiO 2 for m-cresol hydrodeoxygenation (HDO) products at low hydrogen consumption. Thanks to the formation of the Ni-Sn alloy in the system, the bimetallic sites synergistically catalyze the C Ar O bond scission through lowering the reaction energy barrier. Further from charge analysis, it was concluded that the charge transfer from Sn to Ni promotes the hydrogenolysis, and the charge transfer between the slab and the adsorbate provides the possibility for the occurrence of direct deoxygenation reaction. The COHP analysis resulted that the introduction of Sn accelerated the C Ar O bond cleavage. Interestingly, another deoxygenation pathway was proposed from the isomerization conversion of m-cresol to dienone intermediate (3-methyl-3,5-cyclohexadienone) in the calculation of transition state. Further HDO can form toluene effortlessly due to the presence of the oxyphilic metal Sn. This also explains the high selectivity of Ni-Sn to toluene. Moreover, the introduction of the Sn promoter effectively prolongs the lifetime of the catalyst by enhancing the tolerance to carbon deactivation.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Xian Li,Jiafeng He,Weilong Zhang,Lijun You,Jumei Li
A sandwich structured Fe 3 O 4 /Ag/m(TiO 2 -ZrO 2 ) magnetic nanosphere with Ag nanoparticles as an interim layer was fabricated with in situ deposition of Ag nanoparticles onto Fe 3 O 4 nanospheres and subsequent coating an outmost shell of mesoporous TiO 2 -ZrO 2 . As compared to Fe 3 O 4 /m(TiO 2 -ZrO 2 )/Ag with Ag nanoparticles as the outmost layer, unique Fe 3 O 4 /Ag/m(TiO 2 -ZrO 2 ) sandwich nanospheres possess higher efficient charge migration and larger specific surface area disclosed by the BET and photoelectrochemical characterizations, so they present improved photocatalytic activity toward Cr(VI) reduction. In addition, they have high thermal stability because mesoporous TiO 2 -ZrO 2 outmost shell could protect the interim Ag nanoparticles from damage and agglomeration at high temperature. Results showed reduction efficiency of Cr(VI) of Fe 3 O 4 /Ag/m(TiO 2 -ZrO 2 ) reached 98.4 % in 30 min, as 1.6 times as that of Fe 3 O 4 /m(TiO 2 -ZrO 2 )/Ag. The Fe 3 O 4 /Ag/m(TiO 2 -ZrO 2 ) still obtained 91.3 % and 87.9 % reduction ratio after calcination at 500 ℃ and recycling 5 times, respectively. The photocatalytic mechanism was also revealed by scavenger experiments and ERP analysis. This work provided a good example for further design and preparation of magnetic photocatalysts with high performance for the remediation of heavy metal pollutants.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Hui Li,Juan Lai,Min Yao,Yingmeng Leng,Zhengde Wu,Jian Zhang,Hailong Peng,Zumin Qiu
A new method was applied to modify TiO 2 nanoparticles. Epoxy resin (EP) and M-TiO 2 nanoparticles were used to prepare a novel superhydrophobic composite coating (M-TiO 2 @EP) by a one-step spraying method. The M-TiO 2 @EP coating surface has rough surface with hierarchical micro-/nanostructures. The M-TiO 2 @EP coating showed excellent superhydrophobicity capability with a high water contact angle (156°) and low sliding angle (6°). The M-TiO 2 @EP coating exhibited outstanding mechanical durability owing to multilayer structure of M-TiO 2 and the adhesion enhancement of EP, and the coating still retained superhydrophobicity after long-distance (10 m) mechanical wear under the weight of 200 g. Meanwhile, the M-TiO 2 @EP coating can capture stable air film to prevent the permeation of H + , Cl − , and OH − from water and simultaneously absorb more UV irradiation. Additionally, the M-TiO 2 @EP coating superhydrophobicity was also proven for various droplets and excellent self-cleaning performance. Meanwhile, the M-TiO 2 @EP coating also showed outstanding resistance to both extreme temperatures, UV resistance, corrosion resistance, and anti-icing ability. Therefore, the novel M-TiO 2 @EP coating with these excellent properties could yield a prospective candidate for promising outdoor and harsh condition applications.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY
·
2022
·
IF 8.857
Wei Lu,Ao Gao,Weili Sun,Yuntao Liang,Zhenglong He,Jinliang Li,Yong Sun,Shuanglin Song,Shaocong Meng,Yingjiazi Cao
A kind of simple and efficient m-Cresol water-based inhibitor was proposed. The inhibitory effects of its solutions on the spontaneous combustion of different-rank coals were discussed. Furthermore, the micromorphology and wetting characteristics of different-rank coals were analyzed through a scanning electron microscope and a contact angle meter, respectively. Besides, the weight loss rates, oxidation characteristics, pore structure characteristics and free radical changes of different coal samples were investigated by a thermogravimetric analyzer, temperature-programmed experiments, a surface area analyzer and an electron spin resonance spectrometer, respectively. The results indicate that the prepared inhibitor solution at the 0.3 wt% sodium dodecyl sulfate (SDS) not only boasts good emulsification and wetting performance, but also plays a role in permeability enhancement. The m-Cresol/SDS solution can wet the coal surface and permeate the inner pore surface, forming a uniform inhibitor layer on both the coal surface and the inner pore surface to isolate oxygen, retain water and inhibit free radical generation. Moreover, it can not only effectively reduce the weight loss rate, CO production, specific surface areas and free radical concentration in the oxidation process of Coal XLH , Coal BLT and Coal YQ , but also improve the inhibition rate (to 79.1%, 67.4% and 54.3% at 170 °C respectively).
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2022
·
IF 14.224
Kai Yu,Xiuqiong Yang,Mao Wan,Haowen Jiang,Penghui Shao,Liming Yang,Hui Shi,Xubiao Luo
This study, for the first time, evaluates a novel method for the desorption of contaminants from soil that uses the heat generated by zero-valent iron (ZVI) under low-frequency electromagnetic fields (EMF), and elucidates the specific effects of soil pH upon the process. It was found that the temperature of soil mixed with ZVI could reach up to ∼60 °C within 20 min under the applied EMF, and after 60 min the residual fraction of m-xylene in soil decreased by 86.4% compared to no-ZVI soil. The most efficient desorption of m-xylene occurred at a soil of pH 5. Desorption was related to the net heating capacity of the ZVI particles, which was defined by pH-dependent formation of surface corrosion products. The preservation of metal iron and formation of Fe(II) species was favored for heat generation. Soil pH also affected m-xylene retention and the local thermal conduction from ZVI to m-xylene by regulating the surface properties of fulvic acid and ZVI. This study provides valuable information regarding the impact of pH on the thermal desorption of soil contaminants by ZVI coupled with EMF and illustrates the potential of the method in the remediation of contaminated sites.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2021
·
IF 3.196
Dandan Huang,Dezhi Yang,Yang Lv,Jianle Zhou,Liang Li,Jiangping Xu,Xuemei Yang,Zhengzheng Zhou
Cocrystal hydrate accounts for a small percentage of cocrystals of poorly water-soluble drugs, and still lack the explanation on its cause of formation. In this study, a cocrystal hydrate with a novel phosphodiesterase-4 (PDE-4) inhibitor, chlorbipram, is prepared and characterized using multi-techniques. The dissolution behavior, ternary phase diagram and theoretical calculations are further performed and discussed. Chlorbipram: m-Hydroxybenzoic acid (ChBP-MHBA, 1: 1) cocrystal hydrate presents approximate equivalent dissolution (1.61 mg/mL) in comparison with ChBP (1.90 mg/mL) in isopropanol/water (1: 1, v/v) solution. Ternary phase diagram plotted in ethyl acetate solvent suggests that ChBP-MHBA cocrystal hydrate has an optimum mass percentage range from (2.91%: 2.64%: 94.45%) to (3.20%: 10.74%: 86.06%) among ChBP, MHBA and ethyl acetate. There are two lattice waters in each unit cell of ChBP-MHBA cocrystal hydrate, accounting for 4.5% proportion of the cell volume using contact surface calculations. Molecular Electrostatic Potential Surface (MEPS) investigations indicate that the strong hydrogen bonds are formed within the cocrystal lattice, which are between the global minimum values of ChBP/MHBA and the global maximum values of lattice water. In summary, lattice water plays an important role in the formation of cocrystal hydrate, providing hydrogen atom donor and forming hydrogen bonds to support its three-dimensional crystal structure.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）