文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第49至58个,产品总数58个

设置提升方向
光学
JOURNAL OF ALLOYS AND COMPOUNDS · 2017 · IF 3.133

Thermal evaporated Te-Bi2Te3 alloy thin film and its nonlinear optical properties

Xin He,Rongfei Wei,Xiangling Tian,Jianrong Qiu,Mei Zhang,Qingguang Zeng,Junyan Liu

Te-Bi 2 Te 3 alloy thin film has grown on silicon dioxide substrate by thermal evaporation technique. The Bi 2 Te 3 rhombohedral structure enriched Te in the prepared thin film was identified by high solution transmission electron microscopy (HRTEM), X-Ray diffraction (XRD), Raman spectrum and X-ray photoelectron spectroscopy (XPS). Interestingly, the Te-Bi 2 Te 3 alloy thin film presents a changeover from saturable absorption (SA) to reverse saturable absorption (RSA) as continuously increasing the input intensity, which has been investigated using the open-aperture (OA) z-scan measurement under a femtosecond-pulsed laser at 800 nm. A high modulation depth of 48.3% and large saturation intensity of 24.1GW/cm 2 of the thin film were obtained. Moreover, a large nonlinear absorption coefficient β of ∼10 3  cm/GW is increased with the input intensity elevated. The research results demonstrate that the Te-Bi 2 Te 3 alloy thin film could be an emerging optical material for saturable absorber in Q-switched or mode-locking fiber lasers at low incident intensity while serve as optical limiter at high incident intensity.

研究领域: 材料科学 · 凝聚态物理 · 光学工程 · 纳米材料 · 光电子学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2017 ·Vol. 44 ·期 2 ·1731-1736 · IF 2.986

Structural and magneto-optical properties of ferric oxide quantum dots embedded phosphate glass

Jingbo Yu,Qian Zhang,Yi Gu,Anxian Lu

In this study, phosphate glasses embedded with Fe 2 O 3 quantum dots were prepared via a conventional melt quenching technology with further heat treatment. The effect of Fe 2 O 3 content on the structural, optical and magneto-optical properties was investigated. The results showed that the addition of Fe 2 O 3 had no obvious influence on the structure units that built up the host glass and the amorphous nature of glass. In the glass matrix , the existence of Fe 2 O 3 quantum dots was confirmed by high resolution transmission electron microscope . Meanwhile, optical study clearly demonstrated a red shift in optical cut-off wavelength resulted from the size quantization effect. The highest Verdet constant (22.33°/T-cm) was measured for the glass containing 1   mol% Fe 2 O 3 , which was ~ 7 times higher than that of the glass matrix. As the increment of Fe 2 O 3 contents, a phase evolution of Fe 2 O 3 quantum dots from amorphous phase to γ-Fe 2 O 3 phase was recorded due to the Ostwald Ripening effect. Interestingly, a concentration quenching phenomenon in Verdet constant was observed along with the phase evolution of Fe 2 O 3 quantum dots. When the content of Fe 2 O 3 is up to 2   mol%, the glass exhibited paramagnetism with the Verdet constant of − 2.833°/T-cm. This finding can provide a new idea for the development of quantum dot embedded magneto-optical glass.

研究领域: 材料科学 · 磁光材料 · 纳米材料 · 无机非金属材料 · 光学玻璃 · 凝聚态物理
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2015 ·Vol. 27 ·期 4 ·3549-3556 · IF 1.569

The electrochromic properties of mesoporous WO3–polythiophene film devices with composite electrolytes

Wang Lu,Yang Zhouyong,Ni Xiuyuan

We prepare the mesoporous polythiophene–WO 3 film through in situ polymerization which is initiated by WO 3 , and fabricate the electrochromic device with the composite film. The influences of the electrolyte ions, film morphologies and counter electrode on the electrochromism of the devices are explored by UV–Vis transmittance spectra and cyclic voltammetry tests. With the aim to enhance the contrast optical transmittance, we develop the binary composite electrolytes of LiClO 4 and N(C 4 H 9 ) 4 ClO 4 solution which can promote intercalation/deintercalation process. Besides that, we use polyethylene oxide as pore-forming agent on the polythiophene–WO 3 films, so that it will be easier for electrolyte ions to diffuse in the porous film. A NiO layer also has a complementary effect on the cathodic coloration films and increases the contrast optical transmittance remarkably. Equipped with the binary electrolyte and the NiO layer as the counter electrode, the film device exhibits high performance with the contrast optical transmittance (ΔT) of 62 % and the coloration efficiency of 212.6 cm 2 /C.

研究领域: 材料科学 · 电化学 · 功能材料 · 纳米材料 · 能源材料 · 表面科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Small · 2022 ·Vol. 18 ·期 29 ·2202622 · IF 15.153

Affinities and Kinetics Detection of Protein–Small Molecule Interactions with a Monolayer MoS2-Based Optical Imaging Platform

Hao Zhu,Zixuan Chen,Yun Chen,Jun-Jie Zhu

Quantifying the binding kinetics and affinities of protein–small molecule interactions is critical for biomarker validation, drug discovery, and deep understanding of various biological processes at the molecular-scale. Novel approaches are demanded as most common label-free techniques are mass-sensitive, which are not suitable for the detection of small molecule interactions. Here, an optical imaging platform is developed to measure the binding kinetics of both protein–small molecules and protein–ions based on monolayer MoS 2 , an ultra-thin 2D material whose optical absorption is extremely sensitive to charge. A model is established to calibrate the optical response due to the charged analyte binding and it is applied to quantify the interactions between abl1 kinase and different small-molecule inhibitors. Such a presented method is capable of distinguishing different inhibitors binding to a wild or mutated kinase, which provides guidance for drug evaluation and drug mechanism exploration. The binding kinetics of calcium ions to calmodulin is also measured, further broadening the application field of the method. In addition, the imaging capability allows mapping the local binding kinetics of the molecular interactions with a high resolution, which reveals visible spatial variability and offers a promising tool for studying heterogeneous local interfacial interactions.

研究领域: 分子生物学 · 药物发现 · 生物传感器 · 化学生物学 · 生物物理 · 转化医学 · 纳米生物技术
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2020 ·Vol. 46 ·期 10 ·16524-16532 · IF 3.83

Magnetic characteristics and optical band alignments of rare earth (Sm+3, Nd+3) doped garnet ferrite nanoparticles (NPs)

Muhammad Yousaf,Asma Noor,Shuai Xu,Majid Niaz Akhtar,Baoyuan Wang

Yttrium iron garnet (YIG) nanoparticles (NPs) doped with rare earth (RE) metal ions (Y 2.5 Sm 0.5 Fe 5 O 12 , Y 2.5 Nd 0.5 Fe 5 O 12 ) were successfully synthesized by sol-gel auto combustion approach. The cubic crystalline structure and morphology of the prepared garnet ferrite NPs were analyzed by X-ray diffractometer (XRD) and field emission scanning electron microscopy (FESEM). The cubic crystalline garnet phase of the synthesized YIG, Sm-YIG and Nd-YIG samples was successfully achieved at 950 °C sintering temperature . The force constant and absorption bands were estimated by using Fourier transform infrared spectroscopy (FTIR). The doping effect of RE metal ions on the chemical states of YIG were examined by x-ray photoelectron microscopy (XPS). The valence band (from 12.63 eV to 13.22 eV), conduction band (from 10.89 eV to 11.34 eV) edges and optical bandgap values of RE doped YIG samples were calculated using UV–Vis spectroscopy and ultraviolet photo electron spectroscopy (UPS). The magnetic analysis of the prepared NPs was studied using vibrating sample magnetometer (VSM). The XPS analysis of RE doped YIG samples exhibit the existence of RE (Sm +3 , Nd +3 ) contents on the surface of YIG ferrite by decreasing the oxygen lattice in garnet structure. The optical bandgap (from 1.74 eV to 1.88 eV) explains the semiconducting nature of the synthesized NPs. The UPS results confirm the valence band position of YIG doped samples. The saturation magnetization and remanence of RE doped garnet ferrite samples increased from 13.45 to 18.83 emu/g and 4.06–6.53 emu/g, respectively.

研究领域: 材料科学 · 纳米科技 · 固体物理 · 无机化学 · 功能材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2018 · IF 3.779

Pb8M(BO3)6 (M = Mg, Ca): Two new borates with large birefringence activated by the ∞[Pb8B6O18]2- double layers

Chen Zhou,Hui Zhang,Jianian Cheng,Hongyi Li,Sadeh Beysen

Two new isostructural lead borates , Pb 8 Mg(BO 3 ) 6 and Pb 8 Ca(BO 3 ) 6 , have been synthesized via high temperature solution method. The single crystal structures of title compounds contain ∞ [Pb 8 B 6 O 18 ] 2- double layers composed of planar BO 3 triangles, Pb(2)O 9 and distorted Pb(1)O 5 polyhedra, these layers condense in c -axis, and the MgO 6 (or CaO 6 ) polyhedra fill into the layers, forming a three-dimensional framework. The stereochemical activity of lone pair (SCALP) electrons were found in the Pb(1)O 5 polyhedra, which combine with the BO 3 units, generating strong optical anisotropy . The calculated birefringences of Pb 8 Mg(BO 3 ) 6 and Pb 8 Ca(BO 3 ) 6 using first-principles method are 0.15@1064 nm and 0.12@1064 nm, respectively, which are comparable to the commercial α -BaB 2 O 4 (α-BBO) crystal and imply that they probably can be used as birefringent materials. The electronic structures, density of states of title compounds were calculated by density functional theory (DFT). Meanwhile, the TG-DSC curves, infrared spectral and UV–Vis–NIR diffuse reflectance spectral were measured.

研究领域: 无机化学 · 材料科学 · 晶体工程 · 非线性光学材料 · 固体化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Analysis and Testing · 2018 ·Vol. 2 ·期 4 ·332-341 · IF 0

Size-dependent modulation of CoOOH nanoflakes light scattering for rapid and selective detection of tetracycline in milk

Wei Yin Hui,Li Xin Yu,Gao Jie,Liu Jia Jun,Yuan Dan,Yin Bin Cheng,Wang Jian

As an antibiotic, tetracycline has been widely used against bacterial infection or as feed additives for growth promotion, which may lead to the enrichment of antibiotic residues in animals or their products. Therefore, the detection of tetracycline is closely related to human health. The morphological transformation of CoOOH nanoflakes induced by tetracycline was monitored by scanning electron microscope images, dark-field light scattering images and optical spectra, which found that tetracycline could decompose CoOOH nanoflakes into small nanoparticles with low light scattering signal. As a result, the reduced light scattering of CoOOH nanoflakes was proportional to the increased concentration of tetracycline in the range of 1.0–250 μmol/L, and the limit of determination (LOD) was 0.23 μmol/L (3σ/k). Most foreign substances did not interfere in the analysis of tetracycline. Furthermore, the concentration of tetracycline in different milk samples detected with the standard addition method was so low that it accorded with the safety regulation, which was similar to the detection result with high-performance liquid chromatography (HPLC).

研究领域: 分析化学 · 纳米技术 · 食品安全 · 药物分析
✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2024 · IF 8.3

Scattering-Free and Fast Response Polymer Brush-Stabilized Liquid Crystals Beam Steering Using Surface-Initiated Polymerization Technique

Zhenyao Bian,Zi Wang,Hongbo Lu,Miao Xu

Nonmechanical fast response optical beam steering technology is increasingly essential for telecommunications, imaging systems, optical sensing, displays, and military applications. Polymer network liquid crystal (PNLC) beam steering can achieve submillisecond response times but faces limitations due to scattering issues arising from the refractive index mismatch between the polymer network and the liquid crystals (LCs). In this article, we demonstrate a scattering-free, fast-response LC beam steering by using polymer brushes to stabilize the gradient refractive index. First, the initiator is incorporated into the alignment layer and the monomer is mixed into the LC layer. Surface-initiated polymerization (SIP) is then employed to grow the polymer brushes exclusively on the substrate’s surface, thus confining the polymer network’s growth to the LC bulk and reducing interfacial scattering. For polymer brush stabilized liquid crystal (PBSLC) beam steering device with a period size of 225 μm and a cell gap of 7.2 μm, the average transmission rate reaches 88% in the visible light spectrum with a haze value of only 6.91. The steering angle is 0.16, and the diffraction efficiency is 80.3%. When a voltage of 35 Vrms is applied, the primary energy can be tuned to the zeroth order, with a response time close to 1 ms. By cascading two PBSLC beam steering devices with opposite steering directions, the primary energy of the beam can be adjusted between zeroth, +1, and −1 order. This method requires only a UV light source, a precision displacement stage, a power supply, and a mask, avoiding the need for expensive equipment and complex electrode fabrication. By adjustment of the phase change period, step width, and number of steps during fabrication, the steering angles and diffraction efficiency of the PBSLC beam steering device can be easily controlled, highlighting its significant potential for industrial production.

研究领域: 光学 · 光子学 · 材料科学 · 液晶技术 · 非机械式光束偏转
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2024 · IF 4.3

Sb4O5I2: Enhancing Birefringence through Optimization of Sb/I Ratio for Alignment of Stereochemically Active Lone Pairs

Jingyu Guo,Xiangtong Zhan,Jiating Lan,Xin Liu,Shuang Zhao,Xi Xu,Li-Ming Wu,Ling Chen

Birefringent crystals are the key components of functional optics, contributing significantly to scientific and technological advancements. To enhance birefringence, the presence of stereochemically active lone pairs offers a unique opportunity. In fact, strengthening the stereochemical activity and aligning uniformly lone pairs face tough challenges. Herein, an anisotropic layered crystal, Sb4O5I2, is discovered to exhibit enhanced birefringence. The influence of crystal symmetry on the birefringence of Sb4O5X2 (X = Cl, Br, or I) is found to be minor. Instead, the asymmetric nature of ABUCBs (i.e., cis-X3[SbO3]6– and cis-X3[SbO4]8–) plays a crucial role in enhancing the optical anisotropy. And the orientation of these ABUCBs is equally important. We demonstrate that by adjusting the Sb/I ratio from 5:1 to 2:1, all of the intralayer Sb atoms in Sb5O7I-P63 are forced onto the surface position. This structural adjustment leads to strengthened ionic bonding interactions, enhanced activity of the lone pairs, and uniform alignments of the ABUCBs in Sb4O5I2. Consequently, this results in a 6-fold increase in birefringence.

研究领域: 材料科学 · 光学 · 无机化学 · 晶体工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2018 · IF 4.7

Adduct-Type IR Nonlinear-Optical Crystal SbI3·(S8)3 with a Large Second-Harmonic Generation and a High Laser-Induced Damage Threshold

Sheng-Ping Guo,Zong-Dong Sun,Yang Chi,Huai-Guo Xue

A noncentrosymmetric adduct, SbI3·(S8)3, is obtained by a facile solution method. It crystallizes in the trigonal space group R3m, and its structure features van der Waals force connected, isolated trigonal-pyramidal SbI3 and chairlike S8 units. SbI3·(S8)3 exhibits strong second-harmonic-generation responses around 4 times that of KH2PO4 (1.064 μm) and 1 times that of AgGaS2 (AGS; 2.1 μm) at 210–250 μm, respectively. Under both laser-radiation wavelengths, it exhibits type I phase-matching behavior. Its laser-induced damage threshold is measured to be around 26 times that of AGS under 1.064 μm. To better understand these optical data, theoretical calculations are performed to address its electronic structure and optical properties.

研究领域: 材料科学 · 光学 · 无机化学 · 非线性光学 · 晶体工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。