INTERNATIONAL JOURNAL OF ENERGY RESEARCH
·
2022
·Vol. 46
·期 12
·17056-17067
·
IF 4.672
Tao Lyu,Shiying Lin,Lanlan Mo,Feijun Wang,Ziqiang Shao
Summary Natural polyelectrolyte complex has designable structure, unique advantages of composite and strong intermolecular or intramolecular force without chemical cross-linking agents, showing the advantages of good biodegradability and low toxicity. This work reports an application research of natural polyelectrolyte in energy storage device. A multi-doped hierarchically porous carbon is fabricated from polyelectrolyte of sodium lignosulfonate and chitosan and used as electrode material of supercapacitor. The material characterization reveals its large specific surface area of 1768 m 2 g −1 , pore volume of 0.94 cm 3 g −1 with optimum 3D porous structure, and high heteroatom (oxygen, nitrogen, and sulfur) concentration. Benefit from these, the electrodes it made exhibit 354 F g −1 specific capacitance at 1 A g −1 current density, outstanding rate retention of 82.9% at a testing environment of 20 A g −1 , and 97.8% capacitance retention in 3 M KOH electrolyte after 10 000 cycles. Using this material, all-solid symmetric supercapacitor devices show 30.11 Wh kg −1 energy density at 520.88 W kg −1 power density and retains 20.90 Wh kg −1 at 1.03 kW kg −1 . These remarkable electrochemical performances prove the promising porous carbon in this work as electrode material with excellent performance for supercapacitors.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
功能材料
·
碳材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Shaopei Jia,Yanhui Wang,Pengfei Tian,Shuyu Zhou,Haixia Cai,Hongwei Gao,Jianbing Zang
Nitrogen-doped mesoporous carbon (NMC) was synthesized via pyrolysis of cobalt-containing casein obtained by extraction from pure milk with the auxiliary of cobalt ions. The cobalt element in casein promoted specific surface area and N element doping amount of casein-derived porous carbon. The N-doped porous carbon obtained by carbonization at 800 °C (NPC-800) possessed a specific surface area of ∼886.7 m 2 g −1 , and the mesoporous size was centered at 2.7 and 7 nm. X-ray photoelectron spectroscopy analysis showed that the nitrogen content of NPC-800 was 3.29 at%. The NPC-800 was explored as a symmetric supercapacitor, which exhibited specific capacity of 380 F g −1 at a current density of 0.5 A g −1 , 218 F g −1 at a current density of 20 A g −1 , and high capacitance retention of 91.3% after charging/discharging 5,000 cycles.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
碳材料
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 134
·期 28
·45046
·
IF 1.86
Fenglei Liu,Shuixia Chen,Yanting Gao,Yufang Xie
A solid amine adsorbent was prepared by modifying a porous polystyrene resin (XAD-4) with chloroacetyl chloride through a Friedel–Crafts acylation reaction, followed by aminating with tetraethylenepentamine (TEPA). The adsorption behavior of CO 2 from a simulated flue gas on the solid amine adsorbent was evaluated. Factors that could determine the CO 2 adsorption performance of the adsorbents such as amine species, adsorption temperature, and moisture were investigated. The experimental results showed that the solid amine adsorbent modified with TEPA (XAD-4-TEPA), which had a longer chain, showed an amine efficiency superior to the other two amine species with shorter chains. The CO 2 adsorption capacity decreased obviously as the temperature increased because the reaction between CO 2 and amine groups was an exothermic reaction, and its adsorption amount reached 1.7 mmol/g at 10 °C in dry conditions. The existence of water could significantly increase the CO 2 adsorption amount of the adsorbent by promoting the chemical adsorption of CO 2 on XAD-4-TEPA. The adsorbent kept almost the same adsorption amount after 10 cycles of adsorption–desorption. All of these results indicated that amine-functionalized XAD-4 resin was a promising CO 2 adsorbent. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45046.
研究领域:
环境化学
·
高分子材料科学
·
气体吸附与分离
·
碳捕集技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
Hui-Xian Yang,Dong-Lin Zhao,Wen-Jie Meng,Ya-Qian Wu,Yu Yang,Hao Pu,Rui-Ze Gao
Electrochemical energy storage (EES) devices that combine high-performance are essential to resolve the extreme shortage of non-renewable energy sources and environmental issues. Nickel oxide (NiO) is considered to be a promising EES cathode material because of its ultra-high theoretical specific capacitance, whereas the practical applications are greatly limited with poor rate and cycle performance. Herein, we report the yolk-shelled NiO/Ni composites (YS NiO/Ni) that exhibit good charge storage capability in the aqueous electrolyte with high specific capacitance (2207.3 F g −1 at 1 A g −1 ), exceptional rate capability, and ultra-high cycling stability (95.8% retention after 10,000 cycles). The superior property can be ascribed to the special yolk-shelled structure that exposes more redox reaction active sites, and the associate Ni nanoparticles with flower-like NiO which can improve electron transfer as current collectors.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
功能材料
·
电化学能量存储
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2017
·Vol. 43
·期 12
·9327-9333
·
IF 2.986
Nan Zhou,Shengxiong Huang,Tao Hong,Wei Luo,Yun Tian,Xiangyang Lu,Zhi Zhou
In this paper, LiTi 2 (PO 4 ) 3 @carbon composite as anode for aqueous lithium ion battery has been successfully synthesized by in-situ carbon coating method using oxalic acid and glucose as double carbon sources. XRD results confirm the rhombohedral NASICON-type LiTi 2 (PO 4 ) 3 structure of the as-prepared composite. The LiTi 2 (PO 4 ) 3 @carbon composite using double carbon sources (LTP-OG-10) disperses well, and the coated carbon layer has the appropriate thickness of 3–7 nm, which result in proper balance of the good electrical conductivity and the fast kinetics of diffusion of lithium ions . LTP-OG-10 exhibits better electrochemical performance compared with those using oxalic acid (LTP-O) or glucose (LTP-G) single carbon source. LTP-OG-10 anode delivers the discharge capacity of 112.5 mA h g −1 , 96.8 mA h g −1 , and 54.2 mA h g −1 at 0.2 C, 5 C and 20 C, respectively, much larger than that of LTP-O and LTP-G. Moreover, LTP-OG-10 demonstrated excellent cycling performance, with the capacity retention of 71.1% after 400 cycles at 0.2 C, 22.9% higher than that of LTP-G. The good electrochemical properties of LTP-OG-10 is mainly ascribed to the increase of defects, high-quality and appropriate thickness of carbon layer. Our study reveals that preparing LiTi 2 (PO 4 ) 3 @carbon composite using double carbon sources is an efficient approach to enhance its electrochemical properties.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机非金属材料
·
功能材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Liang Chen,Dongmei Luo,Zhenghao Wang,Kejing Wu,Lei Song,Hongjiao Li,Shan Zhong,Siyang Tang,Bin Liang
Chemical looping hydrogen generation (CLHG) offers a promising solution for producing H 2 from industrial off-gas, such as blast furnace gas. However, increasing H 2 production capacity of the oxygen carrier (OC) at moderate temperature remains a significant challenge. In this study, a novel Cu-Fe-based OC is tailored for moderate-temperature CLHG from blast furnace gas. The results demonstrates that the tailored OC exhibits a superior H 2 production capacity of 12.99 mmol·g −1 at 550 °C, which is 6.5 times higher than that of Fe 2 O 3 at the same temperature. The addition of Cu leads to the formation of oxygen defects, which facilitate the migration of lattice oxygen, thereby the activity of the OC is enhanced. Furthermore, cyclical experiments demonstrates that O 2 -assisted regeneration strategy can effectively suppress the segregation of Cu during the cycling process, and the tailored OC shows good stability during 10 redox cycles. No additional separation process was required and the purity of the hydrogen was higher than 99%. The findings here open a new avenue for efficient CLHG from industrial off-gas at moderate operation temperature.
研究领域:
能源化学
·
材料科学
·
化学工程
·
工业气体利用
·
氢能技术
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2009
·Vol. 358
·期 2
·173-179
·
IF 3.19
Guan Huang,Shang-Yue Liu,Yong-An Guo,Ai-Ping Wang,Jin Luo,Chun-Cai Cai
The search for a reusable material as an efficient and economic catalyst for hydrocarbon oxidation is an important field of research. In this study, we investigated the highly effective combination of support and metalloporphyrin provided by manganese tetraphenylporphyrin adsorbed onto a precursor of freshly precipitated aluminium hydroxide, followed by conversion to a manganese porphyrin/boehmite compound. This was characterized using FT-IR, UV–vis spectroscopic techniques, N 2 BET analysis, X-ray powder diffraction, transmission electron micrograph technique and thermal analysis. Aerobic oxidation of cyclohexane has been investigated using the compound as a catalyst under mild conditions and in the absence of any solvent and reductant. The results indicate that it has higher catalytic activity than manganese tetraphenylporphyrin and the corresponding chitosan-supported catalyst. In particular, the catalyst exhibits good atom economy for cyclohexane oxidation, high catalyst turnover number, and good ketone and alcohol selectivity. In particular, it has excellent reusability, with no change in original catalytic activity; a quantity of catalyst containing only 1 mg of Mn TPP can be reused 8 times under the promotion of beomite (BM). In addition, we examined the reaction conditions for the use of such nanoparticle-supported manganese tetraphenylporphyrin as a mild and environmental friendly oxidation catalyst.
研究领域:
催化化学
·
纳米材料
·
绿色化学
·
有机氧化反应
·
多相催化
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yingjun Qiao,Yonggan Ran,Zhiqiang Qian,Bing Zhao,Chengpeng Li,Zhong Liu
The Mn dissolution issue in manganese-based materials (LMO) represents one of the most challenging barriers to further commercial development of electrochemical lithium extraction, which is an efficient and clean way of extracting Li from liquid resources. Here, by leveraging the advantages of composite materials, a novel combination of reduced graphene oxide (rGO) and sulfonated ionic polymers (Nafion) is introduced to relieve the issues of electrode polarization and manganese dissolution, critical factors limiting the durability of LMO electrodes. By modifying with rGO to enhance electronic conductivity and surface characteristics, and capturing dissolved Mn 2+ through Nafion, the modified electrode showed significant improvement in cycling stability and lithium adsorption capacity. Experimental results confirm that this synergistic approach effectively mitigates polarization effects and controls disproportionation reactions, thereby enhancing the stability of the lithium extraction process, revealing a notable increase in electrode capacity retention from 79.04 % to 94.64 % after 30 cycles. Additionally, through DFT calculations and XPS analysis, the effectiveness of the manganese capture strategy is validated. This work presents an effective new strategy to extend the lifespan of manganese-based electrodes and enhance their adsorption performance.
研究领域:
电化学
·
材料科学
·
能源化学
·
环境工程
·
无机化学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2015
·
IF 4.504
Peng Zhang,Zhimeng Liu,Yuping Liu,Hongbo Fan,Yuanqi Jiao,Baiman Chen
In this work, we demonstrate a facile approach to synthesize high-performance and stable TiO 2 @PANI core-shell nanowires (NWs) as flexible electrodes for solid-state supercapacitors (SCs). The TiO 2 @PANI core-shell NWs are grown directly on highly conductive carbon cloth, which not only give efficient charge transport and accessible diffusion of the electrolyte, but also provide large surface area and active sites for redox reaction as well as good strain accommodation. Such these features enable them to deliver a large areal capacitance of 520.3 mF/cm 2 at 0.5 mA/cm 2 with outstanding rate capability. Furthermore, a flexible and stable solid-state SC device based on these TiO 2 @PANI core-shell NWs is also demonstrated. The as-fabricated solid-state SC device yields a remarkable volumetric capacitance of 898.4 mF/cm 3 , excellent flexibility and significant cycling stability with more than 97.2% retention of its capacitance after 10000 cycles. We believe that these findings may open up new opportunities to prepare high-performance PANI-based electrodes for flexible solid-state SCs.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
功能材料
·
柔性电子学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Juan Hong,Kun Cheng,Guiyin Xu,Myles Stapelberg,Yuan Kuai,Pengcheng Sun,Subing Qu,Zexin Zhang,Qidong Geng,Zhuangzhao Wu,Meifang Zhu,Paul V. Braun
Si/Cu/Zn ternary microspheres are prepared by a pulsed electrical discharging method in a scalable manner. Zn and partial Si within these microspheres can then be selectively removed by chemical etching to form Si/Cu nanowires. The Si/Cu (~62 atom% Si) nanowires show a high discharge capacity of 2092 mAh g −1 and a high capacity retention after 500 cycles at a current density of 200 mA g −1 . The excellent rate and cycling performance are attributed to the conductive Cu network and nanowire structure, which increases the electric conductivity of the electrode and accommodates the volumetric change of silicon during the charge/discharge process. Furthermore, the Si/Cu nanowire anode utilizes relatively cheap materials and flexible processing methods, costing approximately $0.3 g −1 . This work presents a novel method to prepare nanowire-like Si-based anode materials , which is promising to boost the yield of Si alloy NWs with low cost.
研究领域:
材料科学
·
电化学
·
纳米技术
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
POLYMER TESTING
·
2022
·
IF 4.931
Ying Chen,Jie Li,Jiawei Lu,Meng Ding,Yi Chen
PVA hydrogels with high strength and toughness are fabricated by dual physical and chemical cross-linking. The best comprehensive mechanical properties can be achieved by reaction at room temperature followed with freeze-thaw and annealing treatment. Besides, the mechanical properties of PVA hydrogel increased first and then decreased with the increase of molecular weight or mass fraction. By changing the reaction solvent, the mechanical properties of PVA hydrogel could also be effectively adjusted. Therefore, the influences of various factors on the mechanical properties of PVA hydrogel can be obtained.
研究领域:
生物材料
·
高分子科学
·
组织工程
·
生物医学工程
·
软物质物理
·
药物递送系统
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 26
·12109-12116
·
IF 3.3
Ming-Hui Cao,Ren-Yan Li,Fen-Fen Huang,Xin-Yin Cai,Miao Cui,Shi-Ya Lin,Jing-Yang Tian,Yuan-Ping Jiang,Zulipiya Shadike,Zheng-wen Fu
P2-Na0.6Li0.11Fe0.27−xMn0.62YxO2 (x = 0, 0.5%, 1%, and 2%) cathode materials were successfully prepared using a traditional solid-state method with ball milling-assisted modification. The effect of Y-doping on the crystal structure, grain size, morphology and sodium storage performance of Na0.6Li0.11Fe0.27Mn0.62O2 was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge cycling tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results demonstrated that the ball-milling pre-treatment method could effectively reduce the grain size and mitigate the aggregation of Na0.6Li0.11Fe0.27Mn0.62O2. Additionally, reasonable Y-doping (x = 1%) significantly enhances the rate capability and cycling stability of Na0.6Li0.11Fe0.27Mn0.62O2via improving the Na+ diffusion kinetics and the reversibility of the oxygen redox reaction. These results indicate that Na0.6Li0.11Fe0.26Mn0.62Y0.01O2 is a promising candidate material for high-rate and long-life cathodes for Na-ion battery application.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机固体化学
·
电池技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）