JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2023
·Vol. 27
·期 5
·1165-1175
·
IF 2.5
Liu Shuling,Zhang Wei,An Yiming,Li Ying,Wang Jie,Wang Chao
The Si-based flexible electrodes attracted increasing research interests owing to the growing demand for high-performance flexible energy storage devices. Herein, a facile and smart self-assembly strategy is adopted to address huge volume expansion and particle aggregation issues of Si-based anodes, and a high-performance freestanding film anode (NC@Si/CNTs/N-rGO) is synthesized. The 3D-crosslinked porous graphene-CNTs networks offer abundant electric conductive pathways, high active sites, large internal space to accommodate the expansion of Si NPs, and facilitate Li + diffusion and insertion/extraction kinetics. The synergistic effect between the well-dispersed Si/NC nanoparticles and 3D porous networks significantly enhances electrochemical performance of Si NPs. The as-prepared NC@Si/CNTs/N-rGO electrode exhibits a high reversible specific capacity of 1089 mAh·g −1 at a charge–discharge current density of 1 A·g −1 after 500 cycles. Even at 2 A·g −1 , the electrode still exhibits an excellent reversible specific capacity of 606 mAh·g −1 after 300 cycles. These indicate that the NC@Si/CNTs/N-rGO is a promising candidate for high-performance flexible anode material in lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
先进电池技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 9
·期 7
·3985-3994
·
IF 11.301
Ruidi Wang,Bei-Bei Xu,Jiachen Wang,Xue Lu Wang,Ye-Feng Yao
The relationship between the structural characteristics and photocatalytic reaction mechanisms of graphitic carbon nitride (g-C3N4) still remains unclarified at the molecular level, which severely hinders the further development of this field. The present study addresses this issue by employing an innovative strategy to investigate the relationship between the H-containing structures of g-C3N4 and its water splitting properties. The exchangeable and unexchangeable protons of the H-containing groups of g-C3N4 were differentiated by selective deuteration, providing a way to distinguish the hydrophilic and relatively non-hydrophilic H-containing groups of g-C3N4. A combination of advanced solid-state NMR approaches reveals that amino group defects (CN2(NHx)) on the C–N skeleton of the photocatalyst likely serve as hydrophilic active sites for facilitating the photocatalytic hydrogen evolution reaction. Accordingly, the newly synthesized g-C3N4 sample having a high concentration of CN2(NHx) by design demonstrates an enhanced H2 yield by a factor of 17 compared to that of pure g-C3N4.
研究领域:
材料化学
·
光催化
·
固体核磁共振
·
表面科学
·
能源材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 53
·42698-42704
·
IF 3.84
Xiaomin Fu,Jiahui Feng,Xingrong Tan,Qiyi Lu,Ruo Yuan,Shihong Chen
Graphite-like carbon nitride nanosheets/3,4,9,10-perylenetetracarboxylic acid hybrids (g-C3N4 NSs–PTCA) were synthesized via π–π conjugate action. Based on novel dual molecular specific recognition of oxyethyl groups to diol and carboxyl to amine groups, a signal-on electrochemiluminescence (ECL) sensor for dopamine (DA) was constructed utilizing g-C3N4 NSs–PTCA as asignal probe and K2S2O8 as a coreactant. Under the optimal conditions, the prepared ECL sensor presented a response to DA with a linear range from 6.0 pM to 30.0 nM. The detection limit (LOD) and limit of quantification (LOQ) of the sensor were 2.4 pM and 7.9 pM, respectively. The g-C3N4 NSs–PTCA signal probe coupling with a novel dual molecular recognition strategy would provide a promising ECL sensing platform for detecting DA sensitively and selectively.
研究领域:
分析化学
·
生物传感
·
分子识别
·
电化学
·
神经递质检测
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2014
·
IF 4.517
Shan Liu,Maochao Wei,Xiangli Zheng,Shuai Xu,Changli Zhou
We are just beginning to exploit the fascinating potential of thionine , called electrochemical probe that can selectively recognize specific polycyclic aromatic hydrocarbons (PAHs), as tools for the detection of tricyclic aromatic hydrocarbons phenanthrene (PHE) and anthracene (ANT). A novel electrochemical sensing platform by modification of electroactive thionine functionalized graphene onto glass carbon electrode (Th/GRs/GCE) surface was constructed. The immobilized thionine showed a remarkable stability, which may benefit from the π–π stacking force with graphene. Under optimum conditions, the proposed electrochemical sensor exhibited high sensitivity and low detection limit for detecting PHE and ANT. The total amount of PHE and ANT could be quantified in a wide range of 10 pM–0.1 μM with a good linearity ( R 2 = 0.9979) and a low detection limit of 0.1 pM ( S / N = 3). Compounds which possess one or two benzene rings or PAHs with more than three rings, such as benzene, naphthalene (NAP), benzo[a]pyrene (BaP) and pyrene (PYR) show little interference on the detection. Consequently, a simple and sensitive electrochemical method was proposed for the determination of PHE and ANT, which was used to determine PHE and ANT in waste water samples. The electrochemical method provides a general tool that complements the commonly used spectroscopic methods and immune method for the detection of PAHs.
研究领域:
分析化学
·
环境监测
·
电化学传感器
·
分子识别
·
污染物检测
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 11
·期 12
·9868-9880
·
IF 1.5
Hongying Li,Xueliang Wang,Tao Wang,Zhaoxia Wang,Wei Zhao
A modified electrode was fabricated by casting graphene oxide (GO) suspension onto the surface of active glassy carbon electrode (GCE), and it can significantly enhanced the oxidation peak currents of m-trihydroxybenzene (m-THB) and p-nitrophenol (p-NP). Based on this, a sensitive analytical method towards their simultaneous determination was established. Many influencing factors such as the type of electrolyte, acidity, scan rates and concentrations were explored. Under the optimal experimental conditions, the oxidation peak currents of m-THB and p-NP were linearly increased with their concentrations ranging from 9 to 100 μM, with the detection limits both of 1 μM. Comparing with other reported methods, this sensor showed wider linear range and lower detection limit. In addition, the proposed method was successfully used to analysis of real environmental water samples with satisfactory recoveries, which verified the practicability of the sensor.
研究领域:
分析化学
·
环境科学
·
电化学
·
传感器技术
·
污染物检测
✓ 已验证
DOI
高影响因子
MethodsX
·
2019
·
IF 0
Chengyuan Liu,Zhiwei Liu,Hongkun Niu,Cong Wang,Zhaowen Wang,Bingliang Gao,Jingjing Liu,Mark Taylor
We provide a method for preparation of binder-free cathode for rechargeable aluminum-ion batteries (AIBs). Ultrasonicated natural graphite (u-NG) flakes in N-methylpyrrolidone (NMP) is drop-casted to a carbon fiber cloth (CFC) to obtain binder-free u-GF@CFC cathode for AIBs. We also provide an in-situ Raman spectral technology and the corresponding in-situ Raman cell to determine the mechanism of intercalation/deintercalation reactions of the chloroaluminate ions at cathode of AIBs. The in-situ Raman spectra are recorded using a Raman spectrometer combined with a potentiostat/galvanostat model electrochemical workstation. • A simple preparation method of a binder-free u-GF@CFC cathode is suggested. • The u-GF@CFC cathode is obtained by drop-casting ultrasonicated graphite flakes on the surface and internal gaps of the carbon fiber cloth. • The method includes the in-situ Raman spectral technology and the corresponding in-situ Raman cell.
研究领域:
电化学
·
能源材料
·
纳米材料
·
电池技术
·
原位表征
✓ 已验证
DOI
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Bin Xiao,Wen-hai Zhang,Peng-bo Wang,Lin-bo Tang,Chang-sheng An,Zhen-jiang He,Hui Tong,Jun-chao Zheng,Bo Wang
Phosphate-based polyanion-structured materials have attracted considerable attention as anode materials in lithium-/sodium-ion batteries due to their stable crystal structure, affordability, and environmental friendliness. V 2 (PO 4 )O was encapsulated into crumpled nitrogen-doped graphene (VPO@N-G) through a facile spray-drying method in which VPO particles were completely encapsulated by N-doped graphene. For the first time, VPO@N-G was explored as an anode material for sodium-ion batteries. The Na + storage behavior of VPO@N-G was systematically investigated at the voltage range of 0.01–3.0 V (versus Na/Na + ). Results indicated that the VPO@N-G anode can deliver a highly reversible discharge capacity of 539 mAh g −1 at 0.05 A g −1 and achieve a highly reversible discharge capacity of 235.9 mAh g −1 even at a high current density of 10 A g −1 . Thus, VPO@N-G can be applied as a high-rate anode material for sodium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米复合材料
·
无机功能材料
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2011
·Vol. 174
·期 1
·41-46
·
IF 2.578
Wang Yinling,Peng Wei,Liu Lin,Tang Min,Gao Feng,Li Maoguo
A strategy is presented for doping graphene into layered double hydroxide films (LDHs) as a means of improving charge transport of the LDH film in a modified glassy carbon electrode. This result in an enhanced electrocatalytic current for dopamine (DA) and a good separation of the potentials of DA, uric acid and ascorbic acid. Under selected conditions, the square wave voltammetric response of the electrode to DA is linear in the concentration range from 1.0 to 199 μM even in the presence of 0.1 mM ascorbic acid, and the detection limit is 0.3 μM at a signal-to-noise ratio of 3. The method was applied to the determination of DA in pharmaceutical injections with satisfactory results.
A strategy is presented for doping graphene into layered double hydroxide films (LDHs) as a means of improving charge transport of the LDH film in a modified glassy carbon electrode. This result in an enhanced electrocatalytic current for dopamine (DA) and the square wave voltammetric response of the electrode to DA is linear in the concentration range from 1.0 to 199 μM with the detection limit of 0.3 μM. The method was applied to the determination of DA in pharmaceutical injections with satisfactory results.
研究领域:
分析化学
·
电化学
·
生物传感器
·
纳米材料
·
药物分析
·
神经化学
✓ 已验证
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2019
·
IF 3.42
Youtong Wu,Shaoguo Wen,Kaiming Chen,Jihu Wang,Guangyu Wang,Kai Sun
Compared with solvent-based resins, waterborne resins still have defects such as insufficient anti-corrosion efficiency. In this paper, the sulfonated graphene/zinc phosphate composites were prepared as an anti-corrosion filler and doped into waterborne polyurethane resin. The morphology of composites is different from pure zinc phosphate. The optimal corrosion resistance can be obtained by adding 0.5 wt% sulfonated graphene/zinc phosphate fillers characterized by Potentiodynamic polarization curves and EIS analysis The corrosion current density ( i corr ) was 0.4252 μA/cm 2 and the charged transfer resistance (R ct ) was up to 10.937 × 10 3 Ω cm 2 , which show a good potential as anti-corrosive fillers in waterborne coatings system.
研究领域:
材料科学
·
高分子化学
·
表面工程
·
腐蚀与防护
·
涂层技术
✓ 已验证
DOI
高影响因子
Energy Technology
·
2021
·Vol. 9
·期 12
·2100743
·
IF 3.631
Xin Hou,Penggang Ren,Zhong Dai,Zhengzheng Guo,Zengping Zhang,Aiyue Sun,Wenwei He,Fang Ren,Yanling Jin
Herein, nitrogen, oxygen codoped porous carbon nanofibers (CNFs) from corn residue-derived lignin are fabricated via the electrospinning method, followed by introduction of graphenes (GNs) via a simple “brush-coating and drying” process. The obtained GN-coated carbon nanofibers (CNFs@GNs) exhibit a 3D network architecture, abundance of heteroatoms, excellent electrical conductivity, high specific surface area (700.92 m 2 g −1 ), thus boosting the electrochemical performances. The CNFs@GNs electrode delivers a higher specific capacitance of 271.1 F g −1 than CNFs (200.3 F g −1 ) at 1 A g −1 . Furthermore, the assembled CNFs@GNs symmetric supercapacitor exhibits an energy density of 20.3 Wh kg −1 at the power density of 199.97 W kg −1 together with a high charge/discharge reversibility of 97.3% and Coulombic efficiency of 99.81% after 10 000 cycles. This “brush-coating and drying” strategy utilized here provides a convenient and efficient route for designing CNFs and GN composites and can be utilized in other active materials.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2024
·
IF 3.4
Kaiwu Fu,Dandan Ma,Nan Zhang,Jiacheng Cao,Xiaonan Chen,Min Zhu,Peiqing La
Oxide thermoelectric materials have a wide range of applications due to their excellent stability, low cost, and non-toxic properties. However, their low thermoelectric conversion efficiency limits their practical use. Therefore, improving the performance of oxide thermoelectric materials has become the focus of current research. Interface engineering is an important approach to enhance thermoelectric properties by optimizing electrical transport properties through multiphase composite regulation of phase interface structure. A series of Sr 0.6 La 0.4 Nb 2 O 6-δ /x wt% graphite (x = 0, 0.6, 1.0, 1.5, 2.0) composite ceramics thermoelectric materials were prepared, and the mechanism for improving their thermoelectric properties was explored. Graphite serves as an electron momentum amplifier within the Sr 0.6 Ba 0.4 Nb 2 O 6-δ matrix, thereby augmenting both conductivity and power factor values significantly. Notably, the incorporation of 1.5 wt% graphite led to a remarkable enhancement in the thermoelectric power factor at 1073 K, reaching an impressive value of 254.84 μW/K 2 m - representing a notable increase of approximately 51 % compared to the unmodified sample - primarily attributed to the elevated electrical conductivity .
研究领域:
材料科学
·
无机非金属材料
·
热电转换
·
固态物理
·
功能陶瓷
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 86
·45930-45938
·
IF 3.708
Mengmeng Zhang,Hongxia Yan,Xiaowei Yang,Chao Liu
In this paper, graphene oxide (GO) was functionalized with a hyperbranched cyclotriphosphazene polymer, which was synthesized by the repeated reactions of hexachlorotriphosphazene with hexamethylenediamine. Subsequently, the resultant functionalized GO was incorporated into dicyclopentadiene bisphenol dicyanate ester (DCPDCE) to prepare composites. Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron spectroscopy were employed to examine the surface functionalization of GO. The effects of functionalized GO on the curing reactivity, mechanical, dielectric, thermal and water resistent properties of DCPDCE resin were investigated systematically. Results show that the addition of modified GO can facilitate the curing reaction of DCPDCE. Meanwhile, the appropriate content of modified GO can enhance the mechanical properties including impact and flexural strengths of DCPDCE resin. When modified GO content is 0.6 wt%, the corresponding composite exhibits slightly higher dielectric constant but lower dielectric loss than pure DCPDCE resin over the testing frequency from 10 to 60 MHz. In addition, the thermal stability and moisture resistance of modified GO/DCPDCE nanocomposties are also superior to that of pure DCPDCE resin.
研究领域:
高分子化学
·
复合材料科学
·
材料物理与化学
·
纳米材料
·
绝缘材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）