OPTICAL MATERIALS
·
2022
·
IF 3.754
Ziang Xie,Ping Wu,Sen Chen,Shiping Zhang,Yili Pei,Li Li,Guodong Fu,Ying Xie,Haochen Guan,Yun Xing,Jianzhang Zhu,Xinran Wang
The power conversion efficiency (PCE) of tin-based perovskite solar cells (TPSCs) was significantly improved when polyvinyl pyrrolidone (PVP) was doped into the formamidinium tin iodide (FASnI 3 ) layer with an optimized doping mass. After doping, the FASnI 3 grain size, film smoothness and average carrier lifetime were largely enhanced, which demonstrate the crystallization quality improvement to FASnI 3 . The champion PCE of the enhanced TPSC was improved to 7.83%, which is relatively 27% larger than that of the control, 6.15%. After continuous storage for 15 days, the PCE of the enhanced TPSC remained 74.4% of its original value. Using the finite difference time domain (FDTD) simulation method, we demonstrated that the light absorption ratio of the FASnI 3 :PVP layer was larger than that of the FASnI 3 , and the photo-generated carrier density of the enhanced TPSC was approximately 2% ∼ 3% larger than that of the control. The ultimate efficiency of the enhanced TPSC was calculated to be 26.23%. It is potential to dope PVP into FASnI 3 to further enhance the device performance of TPSCs.
研究领域:
材料科学
·
光伏技术
·
纳米科技
·
表面化学
·
半导体器件
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 9
·794
·
IF 2.8
Li Ji,Xiang Peng,Tan Xinyu,Li Bowen,Zhang Kai,Zhu Ying,Ren Yanqi,Chen Xiaobo
Organic–inorganic lead halide peroxides (OIHPs) have attracted much interest due to their excellent photovoltaic properties, but practical applications are limited by long-term stability and further performance enhancement. Two-dimensional/three-dimensional (2D/3D) heterojunction is a promising strategy to address these issues. Here, short-chain 3,5-dichlorobenzylamine (DBA) with halogen functional groups is introduced to react with excess PbI 2 to form the 2D perovskite layer in mixed perovskite films of Cs 0.05 (FA 0.85 MA 0.15 ) 0.95 Pb(I 0.85 Br 0.15 ) 3 , which passivates surface defects, favours energy band alignment of functional layers and suppresses non-radiative recombination of carriers. As a result, DBA-treated 2D/3D PSCs obtained a champion PCE of 21.54% with an improved open circuit voltage ( V oc ) of 1.171 V. More importantly, the 2D/3D heterojunction can effectively protect the underlying 3D perovskite from moisture ingress. The unencapsulated 2D/3D devices retain 90% of their initial efficiency even after aging at 40 ± 5% RH for 1000 h, while the 3D device retains only 40%.
研究领域:
材料科学
·
光伏技术
·
纳米结构材料
·
表面化学
·
能源材料
✓ 已验证
DOI
高影响因子
Sustainable Energy & Fuels
·
2020
·Vol. 4
·期 6
·2800-2807
·
IF 5.503
Haili Yu,Busheng Zhang,Ruijuan Qi,Nannan Qu,Chaoliang Zhao,Yan Lei,Xiaogang Yang,Zhi Zheng
Designing lead-free inorganic perovskite or perovskite-like structure materials and researching the corresponding photoinduced charge carrier dynamics are always promising due to both the environment and power conversion efficiency considerations. In this work, we intelligently employ a bilayer metal Bi/Cu thin film with different atomic ratios as the precursor to fabricate a CuBiI4 perovskite-like film in situ with a controlled Bi gradient at room temperature. This structure can significantly affect the photoinduced charge carrier dynamics of the resulting products. Next, a series of transient surface photovoltage (TSPV) measurements are carried out to investigate the photoinduced charge carrier dynamics of such CuBiI4 and CuBiI4:organic hybrid thin films. The results reveal that the gradually decreasing Bi content from ITO to CuBiI4 can facilitate the photoinduced charge carrier transportation. Finally, a champion PCE of 1.10% is obtained for an ITO/CuBiI4:polythieno[3,4-b]-thiophene-co-benzodithiophene (PTB7)/Au solar cell device. In particular, we find an exact negative correlation of the defined parameter L (the defined value for evaluating the photoinduced charge carrier dynamics in TSPV measurements) with the corresponding PCE of various devices for the first time, which may pave a new way for evaluating the potential photoelectric and photovoltaic performances of new materials without the assembly of solar cell devices.
研究领域:
材料科学
·
光伏技术
·
凝聚态物理
·
表面科学
·
能源化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2013
·
IF 4.675
Ying Yang,Pengfei Yi,Conghua Zhou,Jiarui Cui,Xiaolu Zheng,Si Xiao,Xueyi Guo,Wenyong Wang
In this work we investigate novel, agarose-based polymer electrolyte that is modified by magnetic NiO nanoparticles for solid-state dye-sensitized solar cells (DSSCs) applications. After proper treatment under an external magnetic field , the agarose electrolyte exhibits increased ionic conductivity and better penetration into the mesoporous TiO 2 photoanode film, which improves the power conversion efficiency of the DSSCs. Electrochemical impedance spectroscopy measurement is also performed to analyze the magnetic field effect on cell performance. After applying proper magnetic filed intensity, the recombination resistance and redox transport resistance in the devices are improved. This method can be possibly applied to other solid-state electrolyte materials to improve their performance and can lead to more efficient DSSCs.
研究领域:
材料科学
·
能源化学
·
纳米科技
·
光电功能材料
·
可再生能源
·
电化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）