Advanced Optical Materials
·
2023
·Vol. 11
·期 22
·2300888
·
IF 9
Bihao Zhuang,Zicong Jin,Jiahuan Deng,Hui Xiong,Wenzhe Li,Jiandong Fan
Organic-inorganic hybrid metal halide perovskite has played an important role in optoelectronics and photonics due to their extremely high photoluminescence quantum yield (PLQY). However, considering the strong nonmetallic property of antimony (Sb), the excitons in antimony-based single crystals are usually dissipated in the form of non-radiative recombination under organic-inductive effect, which leads to the low PLQY. Herein, two kinds of perovskite-like single crystals, i.e., (8-HQ) 2 SbCl 3 and (8-HQH)SbCl 4 , are innovatively grown. The density functional theory (DFT) calculations reveal that the unique luminescence characteristics are associated with the inductive effect of organic coordination and exciton effect in the metal octahedral skeleton. When Cl − replaces the organic ligand in (8-HQ) 2 SbCl 3 , the inductive effect is reduced while the self-trapped exciton effect in the metal octahedron is enhanced. Besides, the theoretical research on electron transmission in a modeling device reveals that the hydrogen bond of organic A-site in the single crystal promotes the transition of electrons. Based on the luminescent properties of (8-HQH)SbCl 4 , the white LED devices are obtained by coating (8-HQH)SbCl 4 and red phosphor on 450 nm LED chips.
研究领域:
材料科学
·
光电子学
·
凝聚态物理
·
无机化学
·
半导体器件
·
光学材料
·
晶体工程
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Hanbing Zhang,Chunhu Zhao,Shengjie Chen,Jiao Tian,Jiyu Yan,Guoen Weng,Xiaobo Hu,Jiahua Tao,Yanlin Pan,Shaoqiang Chen,Hidefumi Akiyama,Junhao Chu
Obtaining whispering gallery mode (WGM) lasing with prominent stability and high quality optical cavities is extremely desirable but still a great challenge. Despite the recent surge of reports on microspheres, nanowires and nanoplatelets metal halide crystals, there has few reports on the morphology of Hemispheres (HSs) in the form of uniform, component-tunable microcrystals. Here, CsPbX 3 (X = Cl/Br) HSs with smooth surface and regular geometry structure were synthesized on silicon substrates by chemical vapor deposition (CVD) method, and the wavelength of laser can be continuously tuned from blue to green (450–540 nm) at room temperature by varying the halide composition. WGM laser with polarization ratio of 0.70 and cavity quality factor Q of 2485 were realized in the CsPbBr 3 HS cavity. Besides, the crystal cavity suggested a high photonic and thermal stability for the superb capability of continuous stable lasing output under ambient conditions. All these results illustrate that the synthesis of cesium lead halide perovskite HSs may provide an alternative solution for fundamental researches and applications in optical devices.
研究领域:
光学材料
·
凝聚态物理
·
纳米光子学
·
半导体激光
·
功能晶体
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 19
·1900484
·
IF 10.856
Xiaosheng Tang,Weiwei Chen,Zhengzheng Liu,Juan Du,Zhiqiang Yao,Yi Huang,Cheng Chen,Zhaoqi Yang,Tongchao Shi,Wei Hu,Zhigang Zang,Yu Chen,Yuxin Leng
All-inorganic semiconductor perovskite quantum dots (QDs) with outstanding optoelectronic properties have already been extensively investigated and implemented in various applications. However, great challenges exist for the fabrication of nanodevices including toxicity, fast anion-exchange reactions, and unsatisfactory stability. Here, the ultrathin, core–shell structured SiO 2 coated Mn 2+ doped CsPbX 3 (X = Br, Cl) QDs are prepared via one facile reverse microemulsion method at room temperature. By incorporation of a multibranched capping ligand of trioctylphosphine oxide, it is found that the breakage of the CsPbMnX 3 core QDs contributed from the hydrolysis of silane could be effectively blocked. The thickness of silica shell can be well-controlled within 2 nm, which gives the CsPbMnX 3 @SiO 2 QDs a high quantum yield of 50.5% and improves thermostability and water resistance. Moreover, the mixture of CsPbBr 3 QDs with green emission and CsPbMnX 3 @SiO 2 QDs with yellow emission presents no ion exchange effect and provides white light emission. As a result, a white light-emitting diode (LED) is successfully prepared by the combination of a blue on-chip LED device and the above perovskite mixture. The as-prepared white LED displays a high luminous efficiency of 68.4 lm W −1 and a high color-rendering index of Ra = 91, demonstrating their broad future applications in solid-state lighting fields.
研究领域:
材料科学
·
纳米技术
·
光电子学
·
半导体物理
·
固体照明
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
ORGANIC ELECTRONICS
·
2019
·
IF 3.495
Xin Qi,Ganghong Liu,Duo Wang,Ning Zhu,Yuqing Zhang,Zehao Zhang,Cuncun Wu,Xiangdong Li,Wei Luo,Yingqiang Li,Haozhe Hu,Zhijian Chen,Lixin Xiao,Shufeng Wang,Bo Qu
Interfacial modification as a feasible strategy to improve the properties of perovskite solar cells (PSCs) has been widely studied in recent years. In this work, PbCl 2 modification at the interface of SnO 2 /CH 3 NH 3 PbI 3 was used for CH 3 NH 3 PbI 3 -based planar PSCs. The introduction of PbCl 2 between SnO 2 and CH 3 NH 3 PbI 3 layers boosted the crystallization of perovskite film, which promoted the photovoltaic properties of corresponding PSCs. The open circuit voltage ( V OC ) and fill factor (FF) of the PbCl 2 -modified devices (1 mg/mL) were 1.11 V and 0.79, respectively, which were both higher than those of the reference devices without PbCl 2 (1.04 V and 0.76). Moreover, a steady-state power output efficiency exceeding 19% was obtained for the PbCl 2 -modified devices (1 mg/mL), which implied that PbCl 2 modification was an effective and low cost strategy for efficient PSCs.
研究领域:
材料科学
·
光伏技术
·
纳米科技
·
表面与界面工程
·
能源材料
·
半导体器件
·
功能材料
✓ 已验证
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2022
·
IF 5.6
Min Yang,Yujia Yan,Enzhou Liu,Qian Sun,Jun Fan
In recent years, all-inorganic perovskite has been extensively studied due to its excellent photoelectric properties, but the application of Cs n PbBr 2+ n perovskite with excellent stability in the field of chemical sensing has yet to be developed. Herein, Cs 4 PbBr 6 /CsPbBr 3 with good stability was successfully prepared by controlling the synthesis temperature to 100 ° C. The fluorescence intensity of Cs 4 PbBr 6 /CsPbBr 3 exhibited 2,4-dinitriphenylhydrazine (DNPH) concentration-dependent characteristics and could be used for sensing DNPH based on the dynamic quenching process triggered by the collision between Cs 4 PbBr 6 /CsPbBr 3 and DNPH. A good linear model was established based on the detection signal and DNPH concentration in the range of 0.05∼30 mg/L and the detection limit was 0.033 mg/L. This method was applied to detect DNPH in soil and tap water samples with satisfactory results obtained. Therefore, this research broadens the application of Cs n PbBr 2+ n in the field of quantitative detection and is expected to be developed into a fluorescent sensor for the detection of hydrazine substances.
研究领域:
分析化学
·
材料科学
·
环境监测
·
传感器技术
·
光电子学
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2024
·Vol. 12
·期 32
·2401539
·
IF 8
Qianjin Wang,Zhilin Xiang,Peizhi Yang,Yingkai Liu,Qiuhong Tan
Metal halide perovskites recently have emerged as a promising candidate for photodetection due to their exceptional photoelectric performance. However, the high dark current in these materials has hindered their practical application to imaging. In this study, a novel halogen-mixed CsPbIBr 2 microwire photodetector that has a remarkable reduction of dark current by over 100-fold (compared to CsPbBr 3 ), along with a substantial increase in photocurrent, which yields a significantly improved on/off ratio of 6.56 × 10 4 , is developed. More importantly, the halogen-mixed perovskite photodetector exhibits enhanced photodetection performance, including a high responsivity of 133 A W −1 and a remarkable specific detectivity of 4.02 × 10 12 Jones even under ultraweak light conditions as low as 4.5 nW cm −2 . More specifically, high-resolution images are successfully obtained under ultraweak light conditions. The combined analysis of experimental results and first-principles calculation attribute the excellent performance of the CsPbIBr₂ microwire photodetector to a significant reduction in dark current by suppressing ion migration and increasing carrier effective mass, and a remarkable increase in photocurrent resulting from reduced bandgap and enhanced light absorption, as compared to CsPbBr 3 . This research represents a significant advancement in the development of high-performance 1D perovskite-based photodetectors, with promising implications for ultra-weak light imaging applications.
研究领域:
光电子学
·
材料科学
·
纳米器件
·
半导体物理
·
生物医学成像
✓ 已验证
DOI
高影响因子
THIN SOLID FILMS
·
2018
·
IF 1.939
Yanqi Lv,Yanhong Li,Hongxia Sun,Yi Guo,Yanmei Li,Jinkun Tan,Xingfu Zhou
Crystalline yttrium-doped rutile TiO 2 nanorod arrays were synthesized and successfully implemented as a photoanode of perovskite solar cells . Study shows that yttrium was successfully doped and TiO 2 band gap changes from 3.07 eV to 3.02 eV. A positive shift of 100 mV in the flat-band potential (V fb ) was observed in Y-doped rutile TiO 2 nanorods. A power conversion efficiency of 7.95% and a photocurrent density of 15.13 mA/cm 2 were obtained for the doped sample. The photocurrent density is 1.47 times higher than that of the un-doped device. Incident photon-to-current conversion efficiency shows Y-doped device has a clear increase in quantum efficiency in the visible light range from 450 and 750 nm. Open circuit voltage decay measurements demonstrate the superior ability of Y-doped TiO 2 nanorod for separating electrons and holes and decreasing the recombination events. The improved performance is possibly attributed to the enhanced electron injection and transfer efficiency caused by a positive shift in V fb and a reduction in charge recombination. This study opens a door toward the improvement of photocurrent density of perovskite solar cell via an element doping route.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光电子学
·
半导体物理
·
可再生能源
✓ 已验证
DOI
高影响因子
Nanoscale
·
2019
·Vol. 11
·期 36
·16907-16918
·
IF 6.97
Hong Lin,Jian Mao,Minchao Qin,Zhilong Song,Wanjian Yin,Xinhui Lu,Wallace C. H. Choy
While red is one of the primary colors for display applications, the investigation of visible red emitting perovskites, particularly 2D perovskites, is relatively limited. In this work, we demonstrate a single-phase Ruddlesden–Popper quasi-2D (C3H7NH3)2CsPb2I7 perovskite for red color LEDs. Through increasing the annealing temperature of (C3H7NH3)2CsPb2I7 perovskite thin films, we have successfully achieved tunable emission wavelengths from 654 to 691 nm. Equally important, for all the quasi-2D perovskite LEDs, once the annealing temperature is fixed, the emission spectrum is independent of bias voltages, which is very important for their use in lighting and displays. With the analysis of the crystallinity, morphology, and thermodynamic stability of the quasi-2D perovskite, we find that the obtained (C3H7NH3)2CsPb2I7 perovskite is a single-phase quasi-2D perovskite with only n = 2 phase. Besides, we found that the red shifting of emission wavelength is caused by the increase of perovskite crystal size while increasing the annealing temperature. Our results also show that the temperature-induced color tunability can be applied to a series of quasi-2D perovskites with different alkylammonium cations. Importantly, we find that short alkylammonium spacers offer better electrical properties for efficient current transport and high performance in LED applications. This work contributes to controlling the optoelectronic properties of quasi-2D perovskites via controlling their crystal growth as well as paves the way to realize practical lighting and display applications of perovskite LEDs.
研究领域:
材料科学
·
光电功能材料
·
半导体器件
·
纳米结构材料
·
固态照明
✓ 已验证
DOI
高影响因子
Small
·
2017
·Vol. 13
·期 25
·1700364
·
IF 8.643
Xuhai Liu,Dejian Yu,Fei Cao,Xiaoming Li,Jianping Ji,Jun Chen,Xiufeng Song,Haibo Zeng
All-inorganic photodetectors based on scattered CsPbBr 3 nanoplatelets with lateral dimension as large as 10 µm are fabricated, and the CsPbBr 3 nanoplatelets are solution processed governed by a newly developed ion-exchange soldering mechanism. Under illumination of a 442 nm laser, the photoresponsivity of photodetectors based on these scattered CsPbBr 3 nanoplatelets is as high as 34 A W −1 , which is the largest value reported from all-inorganic perovskite photodetectors with an external driven voltage as small as 1.5 V. Moreover, the rise and fall times are 0.6 and 0.9 ms, respectively, which are comparable to most of the state-of-the-art all-inorganic perovskite-based photodetectors. All the material synthesis and device characterization are conducted at room temperature in ambient air. This work demonstrates that the solution-processed large CsPbBr 3 nanoplatelets are attractive candidates to be applied in low-voltage, low-cost, ultra highly integrated optoelectronic devices.
研究领域:
材料科学
·
光电子学
·
纳米科技
·
半导体器件
·
凝聚态物理
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2023
·Vol. 66
·期 5
·1810-1819
·
IF 8.1
Xiao Hongbin,Qian Qingkai,Zang Zhigang
Recently, all-inorganic cesium lead halide (CsPbX 3 (X = Cl, Br, and I) perovskite nanocrystals (NCs) have been extensively investigated for photocatalytic carbon dioxide (CO 2 ) reduction reaction (CO 2 RR). However, because the pristine CsPbX 3 NCs suffer from severe radiative recombination, it is imperative to elaborately design heterostructures to separate electron-hole pairs for achieving efficient CO 2 RR. Herein, palladium (Pd) nanoparticles (NPs) are anchored on CsPbBr 3 NCs by a photo-assisted approach for the first time. The as-prepared CsPbBr 3 @Pd NCs not only build Schottky junctions at the CsPbBr 3 /Pd interfaces that promote the carrier separation and suppress the radiative recombination, but also exhibit lower energy barriers for photocatalytic CO 2 RR than pristine CsPbBr 3 NCs according to the density functional theory calculations. The electron consumption rate reaches a striking peak of 46.2 µmol g −1 h −1 by using CsPbBr 3 @Pd NCs as photocatalysts for CO 2 RR, which is 4.8-fold of the counterpart of pristine CsPbBr 3 NCs. This work not only presents a photo-assisted strategy for anchoring Pd NPs on CsPbBr 3 NCs, but also demonstrates the great potential of using CsPbBr 3 @Pd NCs for photocatalytic CO 2 RR.
研究领域:
材料化学
·
光催化
·
纳米材料
·
环境化学
·
能源化学
·
半导体物理
·
催化化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Xiaowei Kong,Xiaoliang Zhou,Yu Tian,Xiaoyan Wu,Jun Zhang,Wei Zuo,Xiaobo Gong,Zhanhu Guo
A novel La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3-δ (LCFNb) perovskite for solid oxide fuel cells (SOFCs) anode is prepared by means of the citrate-nitrate route and composited with Ce 0.8 Sm 0.2 O 1.9 (SDC) by impregnation method to form nano-scaled LCFNb/SDC anode catalytic layers. The single cells with LCFNb and LCFNb/SDC impregnated anodes both achieve relatively high power output with maximum power densities (MPDs) reaching up to 610, 823 mW·cm −2 in H 2 at 800 °C, respectively, presenting a high potential of LCFNb for use as SOFCs anode. The power outputs of the single cells with LCFNb/SDC composite anode in CO and syngas (CO H 2 mixture) are almost identical to that in H 2 at each testing temperature. This composite anode also presents excellent durability in both H 2 and CO for as long as 50 h, showing desirable anti-reduction and carbon deposition resistance abilities. Besides, the cell output is stable in 100 ppm H 2 S H 2 atmospheres for 20 h at a current density of 600 mA·cm −2 with negligible sulfur accumulation on the anode surface . Hence, a novel iron based perovskite LCFNb anode with remarkable cell performance, carbon deposition resistance and sulfur poisoning tolerance for SOFCs is successfully obtained.
研究领域:
材料科学
·
电化学
·
能源材料
·
无机非金属材料
·
功能陶瓷
·
清洁能源技术
✓ 已验证
DOI
高影响因子
DYES AND PIGMENTS
·
2021
·
IF 4.889
You Liu,Fang Liu,Jungan Wang,Hongyan Huang,Suhao Yan,Song Gao,Lin Wang,Wei Huang,Tianshi Qin
Wide-bandgap photovoltaics (WBPV) could not only provide electrical energy by photoelectronic conversion of the invisible part of the solar spectrum, but also usually had the unique advantage of high open circuit voltage ( V oc). In this work, we reported a novel HTM based on tetrakis (N-phenothiazine) Spirobifluorene (Spiro-PT), its HOMO energy level could be well matched with MAPbBr 3 perovskite HOMO energy level. This HTM could effectively suppress nonradiative recombination, which leads to an increase in the photovoltage of WBPV to more than 1.41 V. As a result, the n-i-p mesoscopic structured WBPV achieved a champion PCE of 7.36% as well as excellent operational stability exhibiting 91% of initial efficiency after 500 h continuous illumination without encapsulation. Based on the high V oc of the MAPbBr 3 /Spiro-PT device, the photovoltaic electrochromic device showed a response speed (the average coloring time was 40 s and the bleaching time was 272 s) and high average visible light transmittance contrast (about 37% in 450–780 nm), the corresponding electrochromic device with maximum dynamic contrast up to 46% at 600 nm between bleached and colored states. This WBPV-powered electrochromic system could provide a pathway towards stand-alone smart window technique for future energy-saving buildings.
研究领域:
材料科学
·
光伏技术
·
纳米能源
·
智能窗技术
·
器件物理
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）