ACS ES&T Water
·
2025
·
IF 4.3
Qiqi Wan,Yiwei Han,Ruihua Cao,Shaolan Du,Jingyi Wang,Tinglin Huang,Gang Wen
The electrochemically driven UV light-emitting diode/chlorine (UV-LED/EC-Cl2) process represents an emerging advanced oxidation technology capable of simultaneously removing microorganisms and micropollutants, making it particularly suited for decentralized water treatment in rural areas (utilized naturally occurring Cl– in water). This research systematically investigated the removal efficiency and underlying mechanisms of the UV-LED/EC-Cl2 process for the selected microorganisms (Aspergillus niger spores) and herbicides (atrazine (ATZ) and 2,4-dichlorophenoxyacetic acid (2,4-D)). The results demonstrated a significant synergistic effect in fungal spore inactivation, primarily attributed to the generation of reactive radical species, which induced severe membrane disruption and elevated intracellular reactive oxygen species levels. Furthermore, the UV-LED/EC-Cl2 process exhibited exceptional herbicide removal efficiency, achieving over 90% degradation within 37 min. The coexistence of A. niger spores reduced the herbicide degradation efficiency by approximately 10%, with the degradation products of ATZ exhibiting increased molecular weight and toxicity. Even in actual groundwater, the UV-LED/EC-Cl2 process maintained a high removal efficiency. Additionally, the electrical energy per log removal of herbicide ranged from 18.3 to 32.5 kWh/m3-log, lower than that of the standalone processes. These findings underscore the potential of the UV-LED/EC-Cl2 process as an effective and energy-efficient solution for simultaneous microorganisms and micropollutant removal in decentralized water treatment.
研究领域:
环境工程
·
水处理
·
高级氧化工艺
·
电化学
·
微生物学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Jingju Cai,Minghua Zhou,Xin Xu,Xuedong Du
Anode materials are crucial to anodic oxidation for wastewater treatment. In this regard, stable boron and cobalt co-doped TiO 2 nanotube (B, Co-TNT) was prepared for the first time, and its lifetime was found increased significantly while electrocatalytic activity decreased with the increase of Co(NO 3 ) 2 in preparation from 1 to 10 mM. Characterized by scanning electron microscope (SEM), X-Ray Diffraction (XRD) and X-ray Photo-electronic Spectroscopy (XPS), B and Co content were optimized and successfully doped on TNT, which was more smooth without ripple with Co content of 0.038 mg/cm 2 in a valence of +2, and B atomic content of 2.17 at.% in form of Ti-B-O. This optimized anode enhanced electrode lifetime 122.8 times while the electrochemical activity decreased slightly when compared to the undoped TNT. The effects of current density, initial pH and initial 2,4-dichlorophenoxyacetic acid (2,4-D) concentration were investigated, and the mainly responsible radical for degradation was confirmed to be the surface OH on B, Co-TNT anode. This anode had better performance on the TOC removal, mineralization current density (MCE) and energy consumption (Ec) when compared with BDD, PbO 2 , DSA and Pt anodes, and it also presented a very stable degradation for 10 cycles oxidation of 20 mg/L 2,4-D with allowable Co leaching. Therefore, B, Co-TNT anode is a promising, stable, safety and cost-effective anode for application in electrochemical advanced oxidation processes (EAOPs).
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2019
·
IF 3.218
Huan Ling,Xiaowen Wu,Ke Li,Fengyu Su,Yanqing Tian,Dan Luo,Yan Jun Liu,Xiao Wei Sun
Electrochromic (EC) devices with reversible transmittance switching have promising prospects in the applications of photoelectric displays. Herein, a novel air-stable and high contrast solution-phase electrochromic device based on new viologen derivative (DPB) with A-D-A structure (A: acceptor; D: donor) was demonstrated. Devices possessed simple configuration of ITO/EC solution/ITO. Ferrocene and polycarbonate (PC) were selected as the complementary material and solvent, respectively. All of the fabrications and performance testing work were conducted in normal air condition. The DPB-based device showed deep magenta color in colored state and exhibited high optical contrast of ΔT of 72.2% (517 nm) and good coloration efficiency of 102.2 cm 2 /C at 1.8 V. The device appeared only slight degradation of ΔT (ΔT = 69.6% or retained 96.7% of its initial ΔT after 5000 s constant switching) under the normal air atmosphere, which was even better than some reported well-packaged viologen-based solution ECDs. Additionally, the UV–vis reflective spectra were also conducted to assess the reflectance property of the devices. The reflectance peak (ΔR = 2.6%) and absorption peak matched accurately, which indicated that the new viologen derivative possesses the potential application in reflective electrochromic devices.
研究领域:
材料科学
·
电化学
·
光电
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2023
·
IF 16.5
Mingjia Lu,Lecheng Liang,Binbin Feng,Yiwen Chang,Zhihong Huang,Huiyu Song,Li Du,Shijun Liao,Zhiming Cui
The electronic conductivity and durability of porous carbon supports can be improved by increasing the degree of graphitization in the material; however, the preparation of highly graphitic porous carbon using conventional furnaces remains a significant challenge. Herein, we demonstrate a universal and highly efficient carbothermal shock strategy that significantly improves the degree of graphitization of porous carbon supports, including bowl-like carbon, hollow carbon spheres, ZIF8-derived carbon, BP2000, and Ketjen EC 300J. Taking bowl-like carbon as an example, we illustrate the synthesis of a graphitized bowl-like carbon (G-BC-S) support and evaluate the performance of PtCo/G-BC-S in the oxygen reduction reaction (ORR) in rotating disk electrodes (RDE) and H 2 /air PEM single cells. PtCo/G-BC-S exhibits faster ORR kinetics than PtCo/BC and Pt/C, with little loss of activity (25%) and only 13 mV of E 1/2 decay after 20000 cycles accelerated stress testing under 1.0–1.5 V vs . a reversible hydrogen electrode (RHE). The significantly enhanced performance of the PtCo/G-BC-S catalyst arises from the high activity and chemical/structural stability of the PtCo intermetallic nanoparticles and from the high degree of graphitization and well-defined porous structure of the bowl-like carbon support, which confers excellent electrical conductivity and oxygen transport properties. This study provides a reliable and universal strategy for the development of high-performance porous carbon supports for practical applications in fuel cells.
研究领域:
材料科学
·
电化学
·
能源材料
·
催化
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Qian Long,Hanfeng Cui,Jing Zhang,Qiqi Fan,Ting Huang,Hai Shuai,Xiaocui Yin,Guobing Wei,Huanwen Chen,Hao Fan
Cu 2+ serves as a significant biomarker in various physiological processes. This study presents the development of a novel Ru-UiO-TPEA functionalized metal-organic framework (MOFs) probe for Cu 2+ detection, employing both electrochemiluminescence (ECL) and electrochemical (EC) methods. Employing a dual ligand-assisted energy transfer approach, we synthesized Ru-UiO with optimal ECL and EC properties by adjusting the synthesis ratio of biphenyldicarboxylic acid to Ru(dcbpy) 3 2+ . This was followed by its conjugation with N-(2-aminoethyl)-N, N′, N′-tris(pyridin-2-ylmethyl) ethane-1,2-diamine (AE-TPEA) to form the highly conjugated Ru-UiO-TPEA probe for Cu 2+ detection. As the Cu 2+ concentration increased, the probe exhibited a diminished ECL signal and an enhanced differential pulse voltammetry (DPV) signal. The dual-mode detection method enabled cross-validation of the ECL and EC signals, enhancing accuracy and effectively minimizing errors. The ECL and EC methods had detection limits of 0.26 nM (range: 1 nM to 10 μM) and 0.65 nM (range: 2 nM to 80 μM), respectively. Meanwhile, these two methods can effectively detect Cu 2+ in rat brain microdialysis fluid. Notably, the measured concentrations correlated well with those determined by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), highlighting its potential in biological and clinical bioelectronic sensing applications.
研究领域:
分析化学
·
生物化学
·
生物医学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）