MOLECULES
·
2023
·Vol. 28
·期 12
·4604
·
IF 4.6
Li Zhang,Mengting Zhang,Pingping Yang,Yin Zhang,Junjie Fei,Yixi Xie
Rutin, as a biological flavonoid glycoside, has very important medicinal value. The accurate and rapid detection of rutin is of great significance. Herein, an ultrasensitive electrochemical rutin sensor based on β-cyclodextrin metal–organic framework/reduced graphene oxide (β-CD-Ni-MOF-74/rGO) was constructed. The obtained β-CD-Ni-MOF-74 was characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and nitrogen adsorption and desorption. The β-CD-Ni-MOF-74/rGO presented good electrochemical properties benefiting from the large specific surface area and good adsorption enrichment effect of β-CD-Ni-MOF-74 and the good conductivity of rGO. Under optimal conditions for the detection of rutin, the β-CD-Ni-MOF-74/rGO/GCE showed a wider linear range (0.06–1.0 μM) and lower detection limit (LOD, 0.68 nM, (S/N = 3)). Furthermore, the sensor shows good accuracy and stability for the detection of rutin in actual samples.Keywords:electroanalysis;carbon materials;electrochemical reduction;modified electrode
研究领域:
分析化学
·
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Meng Wang,Panpan Zhou,Tong Feng,Zhi Song,Qingguo Ren,Huidong Gu,Xueqing Shi,Qitu Zhang,Lixi Wang
Benefiting from its large specific surface area, abundant defects and functional groups, two-dimensional (2D) laminated Ti 3 C 2 T x MXene is a kind of electromagnetic wave (EMW) absorber with great potential. However, the impedance mismatch caused by the excessive conductivity, inappropriate permittivity and lack of magnetic loss seriously hinders the application of MXene to EMW absorption. Herein, multidimensional hierarchical Ni/TiO 2 /C nanocomposites composed of three-dimensional (3D) hydrangea-like Ni/C microspheres and well-arranged 2D carbon sheets embedded with TiO 2 nanoparticles were successfully fabricated from a Ni-based trimellitic acid framework (Ni-BTC) and Ti 3 C 2 T x MXene via facile in-situ solvothermal assembly and annealing processes. As expected, excellent EMW absorption properties were obtained only by changing the annealing temperature. The minimum reflection loss ( RL min ) value of -45.6 dB and the effective absorption bandwidth (EAB) of 3.40 GHz (14.6–18.0 GHz) with a layer thickness of only 1.5 mm is obtained by annealing the sample at 700 °C. The outstanding ternary multilayer structure and the optimization of magnetoelectric synergy in impedance matching jointly create its remarkable EMW absorption performance. This work is expected to provide a simple and effective method to design MXene-based EMW absorbing materials possessing high absorption intensity, light weight, wide EAB and thin thickness.
研究领域:
材料科学
·
电磁材料
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2015
·
IF 4.762
Dengrong Sun,Fangxiang Sun,Xiaoyu Deng,Zhaohui Li
Different amounts of Co-substituted Ni-MOF-74 have been prepared via a post-synthetic metal exchange. Inductively coupled plasma mass spectrometry, powder X-ray diffraction (XRD), N2 adsorption/desorption, and extended X-ray absorption fine structure (EXAFS) analyses indicated the successful metathesis between Co and Ni in Ni-MOF-74 to form the solid-solution-like mixed-metal Co/Ni-MOF-74. It was found that introduction of active Co into the Ni-MOF-74 framework enabled the inert Ni-MOF-74 to show activity for cyclohexene oxidation. Since Co was favorably substituted at positions more accessible to the substrate, the mixed-metal Co/Ni-MOF-74 showed superior catalytic performance, compared with pure Co-MOF-74 containing a similar amount of Co. This study provides a facile method to develop solid-solution-like MOFs for heterogeneous catalysis and highlights the great potential of this mixed-metal strategy in the development of MOFs with specific endowed functionalities.
研究领域:
材料科学
·
催化化学
✓ 已验证
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Haopeng Jiang,Mengyang Xu,Xiaoxue Zhao,Huiqin Wang,Pengwei Huo
The electron density on the catalyst surface has a great influence on the multi-electron transport process of photocatalytic reduction of CO 2 . In this work, hierarchical Cu 2 O/Ni-MOF composite photocatalyst with local surface plasmon resonance (SPR) properties was prepared by simple hydrothermal and water bath methods. Through DRS, XPS and AES tests found that the SPR of Cu 0 expanded the light absorption , provided hot electrons for the reaction system, and greatly improved the photocatalytic activity in coordination with the hierarchical structure and heterostructure. In the absence of sacrificial agent, the CO yield of 30%-Cu 2 O/Ni-MOF was 4.1 times of Cu 2 O (5.32 μmol/g) and 11.1 times of Ni-MOF (1.95 μmol/g), respectively. Then, the possible photocatalytic reaction path was simply speculated based on in-situ FT-IR. In conclusion, the hierarchical structure, heterostructure and SPR effect accelerate the kinetics of Cu 2 O/Ni-MOF photocatalytic reaction, thus improving its photocatalytic activity.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2024
·
IF 3.2
Wei Xia,Gui-Zhi Guo,Xue-Qian Wu,Ya-Meng Yin,Ya-Pan Wu,Shuang Li,Ruan Chi,Dong-Sheng Li
Direct methanol fuel cells (DMFCs) can permit the utilization of noble-metal-free electrocatalysts , which certainly reduces the cost and accelerates their practical implementation. With the exploration of efficient and economical methanol oxidation reaction (MOR) catalysts, Ni-based nanostructures have been recognized as the most promising MOR catalysts in alkaline media. Herein, we construct a novel heterojunction MOR electrocatalyst composed of Ni-based metal-organic framework (Ni-MOF) and NiFe-based layered double hydroxides (LDHs) through a coordination-induced self-assembly strategy. Owing to the synergic effect between Ni and Fe sites, coupled with the effect of hetero-interface, the resultant Ni-MOF/NiFe-LDH composite exhibits remarkable MOR activity in 0.1 M KOH electrolyte with the oxidation current density (32.66 mA cm −2 ) is 2.65 and 2.44 times higher than that of the primitive NiFe-LDH and Ni-MOF. The excellent stability of the Ni-MOF/NiFe-LDH electrocatalyst has also been confirmed by long-term chronoamperometry (CA) analysis. Our work paves a facile controllable way for fabricating MOF/LDH heterostructure targets on MOR and underlines its potential to boost energy conversion efficiency through the manipulation of synergic components.
研究领域:
材料科学
·
电化学
·
能量转换
·
催化
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2023
·
IF 4.8
Lili Xiao,Xinhua Fang,Yuan Cao,Lin Hu,Jin Jiang
In this work, a new rod-like Ni-MOF (rNi-MOF) acted initially as an important catalyst in hydrolyzing of extrinsic Ni 2+ . Then rNi-MOF would also be etched by protons (the other product of hydrolysis) resulted in increasing free Ni 2+ that can bond with OH − for in-situ formation of Ni(OH) 2 coated on rNi-MOF. The amount of extrinsic Ni 2+ and water showed significant influences on morphology of rNi-MOF/Ni(OH) 2 . It was found the rNi-MOF/Ni(OH) 2 prepared by 4 mL water and 0.5 mmol Ni 2+ exhibited excellent electrochemical performances in detection of glucose due to its high specific surface area (220 m 2 g −1 ), abundant active Ni(II)/Ni(III) pairs. The rNi-MOF/Ni(OH) 2 modified glassy carbon electrode (rNi-MOF/Ni(OH) 2 /GCE) exhibited a high sensitivity of 3616 μA mM −1 cm −2 , the low detection of limit (0.7 μM). Moreover, the proposed modified sensor displayed a high reproducibility and stability which set a foundation for promising application in detecting of glucose in human serum with good recoveries (95 %–105 %).
研究领域:
材料科学
·
电化学
·
分析化学
·
生物传感器
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2019
·Vol. 11
·期 19
·9598-9607
·
IF 6.97
Shiyu Zhang,Zhendong Yang,Ke Gong,Ben Xu,Hao Mei,Haobing Zhang,Jiaxin Zhang,Zixi Kang,Youguo Yan,Daofeng Sun
Conformal hydrolysis of MOF precursors is a promising strategy to prepare hierarchical metal hydroxide electrode materials on a large scale with low cost and high efficiency. However, a complete transformation is challenging due to the normal “outside-in” conversion process. After studying the hydrolysis of Ni-MOF-74, which has regular 1D channels, we suggest that the transformation to Ni(OH)2 can occur simultaneously outside and within the precursor depending on the treatment temperature. Molecular dynamics simulations reveal that a higher temperature weakens the steric effects of OH− ions and facilitates the diffusion in the regular channels, and therefore, a complete transformation from Ni-MOF-74 to Ni(OH)2 is achieved. It is for the first time demonstrated that the 1D channels of MOFs are utilized for the complete conformal hydrolysis of Ni-MOF-74 to Ni(OH)2 electrode materials. Meanwhile, we also perform pioneering work illustrating that the complete conformal hydrolysis is the key to the improved supercapacitor performances of the MOF-derived Ni(OH)2 electrodes. The prepared Ni(OH)2 electrode under the optimized conditions has a specific capacity of 713.2 C g−1 at a current density of 1 A g−1, which is at least 28% larger than those of the Ni(OH)2 prepared at other temperatures. The detailed analyses based on CV and EIS of the obtained Ni(OH)2 electrodes indicate that the residual MOFs within electrodes due to incomplete hydrolysis significantly influence the diffusion length and diffusion efficiency of OH−, drastically lowering the supercapacitor performances.
研究领域:
材料科学
·
电化学
·
计算模拟
✓ 已验证
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Mengfang Jiang,Xuefeng Zhang,Xiao Du,Xiaowei An,Fengfeng Gao,Xiaogang Hao,Guoqing Guan,Zhong Liu,Jun Li,Abuliti Abudula
An electrochemically induced electrode with bromide ion (Br - ) dual adsorption sites was obtained by in-situ growing of Ni-MOF derivative/NiCo layered double hydroxide (Ni-MOF(D)/NiCo LDH) composite film on the stainless-steel wire mesh via an electrodeposition-assisted solvothermal method, which exhibited excellent Br - selectivity from ionic mixture solutions of Br - , NO 3 – and I - in an electrochemically switched ion exchange (ESIX) system. The Br - extraction capacity was as high as 126.30 mg·g −1 and the separation factors of Br - /NO 3 – and Br - /I - were 8.29 and 4.83 respectively. Combining the simulation and experimental results, it was confirmed that the highly efficient selective extraction of Br - in neutral solution should be derived from the dual-site (i.e., electrochemically induced laminate metal coordination sites and interlayer anion exchange sites of NiCo LDH) adsorption. Furthermore, the electrode demonstrated superior adsorption–desorption performance and electrochemical stability because of the in-situ growth strategy, which enhanced the binding force between NiCo LDH and substrate and improved the electrical conductivity of NiCo LDH, and provided a storage space for Br - . This study served deep understanding of ions selective extraction mechanism of LDH-based materials in the ESIX process, which could be a novel reaction concept for the design of those electrodes with specific recognition sites in the applications of them in other fields such as supercapacitors, sensors and batteries.
研究领域:
材料科学
·
环境科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Yunhua Song,Yang Yang,Shudi Mo,Donggang Guo,Lu liu
Construction of heterostructure engineered to modulate the electronic structure and enhance conductivity is an effective approach to enhance the performance of materials. The construction of heterostructure electrocatalysts with efficient catalytic activity by combining 2D nanosheet metal organic frameworks (MOFs) with other earth-rich transition metal oxide materials is a compelling study. Herein, a novel (Fe 2 O 3 ) 0.36 @Ni-MOF heterostructure nanosheets has been synthesized by a rapid one-pot hydrothermal procedure as an efficient OER catalyst. (Fe 2 O 3 ) 0.36 @Ni-MOF exhibited prominent OER property with the overpotential of 230 mV at10 mA cm −2 , a small Tafel slope of 66.7 mV dec −1 and ignorable activity decay after 20 h long-term test at 10 mA cm −2 . The excellent properties of (Fe 2 O 3 ) 0.36 @Ni-MOF nanocomposite could be attribute to the vast amounts of active sites exposed by the nanosheets and ultrasmall size nanoparticles, and the electronic interaction between Fe 2 O 3 and Ni-MOF in the heterostructure. This work presents an attractive tactics for the preparation of heterostructure catalysts with good OER catalytic performance.
研究领域:
材料科学
·
电化学
·
纳米技术
·
催化
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2024
·
IF 18.5
Wenqian Zhang,Shengming Zhang,Minghao He,Weixian Hu,Wenhao Han,Kangkang Zha,Qian Feng,Guohui Liu,Yanli Zhao,Bobin Mi
Postmenopausal bone loss due to estrogen deficiency necessitates effective therapeutic strategies. Our study explores targeting macrophage Aurora A kinase to mitigate bone loss. Aurora A kinase phosphorylation is observed being increased in bone marrow-derived macrophages (BMDMs) from ovariectomy (OVX) mice, along with a reduction in programmed death-ligand 1 (PD-L1) expression. Detailed analysis reveals that PD-L1 plays an immunomodulatory role by lowering the ratio of T helper 17 cells and regulatory T cells. The metabolic shift toward glycolysis through transcriptome sequencing, induced by Aurora A kinase inhibition, is essential for PD-L1 expression in BMDMs. The interaction between Aurora A kinase and cytochrome C oxidase subunit 5B is found to enhance PD-L1 expression. To apply these findings therapeutically, a multifunctional system is developed using a Nickel-metal organic framework combined with bisphosphonate and MLN8237 (BP@Ni-MOF/MLN8237). This system targets bone tissues through bisphosphonate and effectively delivers MLN8237 to macrophages, promoting PD-L1 expression for a favorable immune environment. Moreover, this system exhibits an obvious angiogenic effect. The present study highlights the crucial roles of macrophage Aurora A kinase and PD-L1 in maintaining bone homeostasis as well as the angiogenesis effect by Ni-MOF engineered system, presenting a promising therapeutic approach to prevent postmenopausal bone loss.
研究领域:
医学
·
免疫学
·
骨科学
·
分子生物学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL
·
2016
·
IF 3.958
Xueliang Cui,Wei Zuo,Meng Tian,Zhengping Dong,Jiantai Ma
Ni MOF-derived N-doped magnetic mesoporous carbon-supported Pd nanoparticles (Pd/Ni-mCN) were prepared and used in the hydrodechlorination (HDC) of chlorophenols (CPs) water pollutants with H 2 at mild reaction conditions. The Pd/Ni-mCN catalyst was characterized in detail by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), N 2 adsorption/desorption, and vibrating sample magnetometry (VSM). The Pd/Ni-mCN nanocatalyst showed high activity and complete HDC conversion of a target pollutant such as 4-CP after 90 min at ambient conditions. Other CPs compounds such as 2-CP, 3-CP, 2,4-dichlorophenol (2,4-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) were also tested in the HDC reaction. 2-CP was the only intermediate product in the HDC of 2,4-DCP, with phenol being the final product. The HDC of 2,4,6-TCP proceeded with the intermediate formation of 2-CP and 2,4-DCP, this being potentially originated from the steric hindrance of the ortho-substituted Cl atom. Additionally, Pd/Ni-mCN exhibited high catalytic stability and recyclability. Thus, Pd/Ni-mCN was successfully recycled owing to its superparamagnetic properties and reused for at least five times showing stable conversions (above 99% at 90 min) the HDC of 4-CP.
研究领域:
催化
·
环境化学
·
材料科学
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Li Tian,Shuning Yang,Guangping Ma,Pengfei Han,Hanyue Jiang,Wenzhuo Wang,Juan Lu
The electrochemiluminescence (ECL) sensor for detecting oxytetracycline (OTC) was constructed by sequentially modifying luminol@β-cyclodextrin (β-CD) and Ni-MOF@Pt NPs on the electrode surface. In this platform, luminol serves as a luminescent reagent, and Pt NPs serve as co-reaction accelerators of the system. β-CD and Ni-MOF are used as carriers to carry luminol and Pt NPs respectively, and the luminescence intensity was further improved by increasing the carrying capacit. In addition, the OTC quenching strategy is adopted, and the constructed sensor is based on the energy transfer of luminol. Under optimal conditions, this sensor exhibited the linear detection range of OTC was found to be between 2.0 × 10 −12 M to 2.0 × 10 −7 M, with a detection limit of 6.7 × 10 −13 M (S/N = 3). The sensor showed good high selectivity and ultra-sensitivity, and obtained satisfactory results when detecting honey and milk samples.
研究领域:
分析化学
·
生物传感
·
食品安全检测
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）